Sync Logic with another application

Hi, I would like to sync Logic Pro with another program (Band in a Box). I am pressing "synchronize" and "record" get the program on hold (with a red/pink band at the top). I then set Band in a box to send "midi sync" to the virtual port. I expect logic to start recording, but it doesn't. On the other hand, I can see the midi notes coming in ( see them in logic's transport bar); also if I manually start recording, the notes get recorded. If I get the midi notes, why doesn't logic start authomatically? Manually I can not synchronies properly both programs...I have tried all different options in logics midi and synchronies options, but don't get it to work...appreciate any help

Logic does not sync to MIDI Clock. Anymore. Send MTC from BIAB or from Logic (in case BIAB can sync to MTC) instead.
Christian

Similar Messages

TS1702 I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history

I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history lost.
Tried following up with the developer's instruction. Didn't help. Developer suggested contacting Apple if their instruction didn't work. Tried the various methods recommended on the Apple site. Same result.

Telling is that you tried most of the things on the net doesn't tell us exactly what you did try, so we are all still left to guess .....
Sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again
If that doesnt work - go to Settings>General>Date and Time - set the date ahead by a few months. Try to update again. If you get an error message of any kind - go back and change the date and time to automatic again. Then try again.
If that doesn't work, restart your router and reboot the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Cookies (working with another application)

Hello,
I am currently working on a project. I finished everything in the project but there are many requests to bypass the login page. Currently users log on to a facutly site which then gives them the link to my application. The password for the faculty site and my own differ. They are requesting that the login page can be avoided when opening the application from the faculty site.
I read a similar thread at Re: How to co-work with another application with Cookie or something
So, the faculty page would authenticate. My application uses the same database, but should work well as is. There is no transfering of information between applications. Basically all my application needs to do is log the user in automatically.
I believe this is done via cookies. I've tried some OWA_COOKIE procedures, but I think I am doing it all wrong. It is an area that I've never covered.
Any help would be great. Thanks
-Tim

On a further note,
I used the same logic as in the thread Re: How to co-work with another application with Cookie or something
On page 150 I set the cookie using:
begin
owa_util.mime_header('text/html', FALSE);
owa_cookie.send(
expires => sysdate+10,
name=>'TEST',
value=>lower('testing'));
wwv_flow.g_unrecoverable_error := true;
owa_util.redirect_url('f?p=&APP_ID.:200:&SESSION.');
exception when others then null;
end;
Then on page 200 I read it using:
declare
v varchar2(255) := null;
c owa_cookie.cookie;
begin
c := owa_cookie.get('srprt');
:TEXTFIELD1 := '';
:TEXTFIELD1 := c.vals(1);
exception when others then null;
end;
this works. So what I would like to do now is read in a cookie from the other site. Is this at all possible?

I had to format my HD, now iTunes says my iPOD is sync'd with another computer. How do I get my iPOD's music back in to the library and sync it with the computer again?

I had to format my computers hard drive. Now the iTunes thinks my iPOD is sync'd with another computer. How do I get re-sync the iPOD and computer and get my songs on the iPOD back in to the iTunes library. Thanks!

Can't tell you exactly, as it can be used to facilitate piracy and Apple blocks this sort of thing from occuring (except for itunes purchased music)
But you can find out what your looking for at iLounge, i'd suggest that method for "mixed" music from different sources, that way you get it all back.
Next time, hit the iTunes menu and backup your library to disks, only takes a few minutes and a few DVD-R's.
Good Luck

Device is already sync'd with another user account - Do I want to Replace or Merge?

same issue with 3gs / ipad / itouch ... when go to sync with computer receive message saying that device is already sync'd with another user account - Do I want to Replace or Merge?
what's going on?
the only thing I did was change my password on Itunes store via the computer (because it won't remember it since 10. upgrade!)
thanks

Is someone else using the PC and iTunes?
Create another user for the PC with your name, and try syncing that way.
This way it wont conflic with the other user.

Can't remember password for new ipad air. have never synced it with another computer never had the chance to use icloud. How do i get in?

Air MD792E/A, iPAD WIFI CELL 32G Space Grey
Can't remember password for new ipad air. have never synced it with another computer never had the chance to use icloud. How do i get in? Tried to sync with itunes but iTunes can't sync without a password. I cannot see summary on the side bar. How do I restore so I can restart my iPAD Air since it has relatively no history. I have not had the chance to use it yet. Finished set up to as far as the start menu.
<Personal Information Edited by Host>

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Can I sync iphone with another computer

Can I sync iphone with another computer?

If you do, you will lose all of your information on the phone. You can only sync to 1 itunes library at a time on 1 computer.

Must duplicate my photo because "this photo was previously edited with another application..."

I've always used both iPhoto and Adobe Photoshop Elements for editing my photos. Previously, I could edit in the external application (Adobe PE), save the photo (back to iPhoto), go back into iPhoto and then still edit that photo within iPhoto if I wanted to.
Recently, though, if I edit a photo in Adobe PE and save it, if I attempt to edit it further within iPhoto, I am warned: "Image Cannot Be Edited: This photo was previously edited with another application or with an early version of iPhoto. Duplicate this photo to edit it."
I don't WANT to keep duplicating my photos - it's a stupid waste and I just want to tweak my previously edited photo.
When did iPhoto start requiring duplication in order to edit a photo that had been worked on in another program?
And why?
And is there any way I can change this or get around it?
Thanks.

Where are you seeing these Jpegs when you duplicate the Raw?
Duplications are virtual. Try this test.
Select a Raw and go File -> Reveal in Finder -> Original
That brings you to the Master file in the iPhoto Library. It's selected.
Apply a label to it - In the Finder: File -> Label.
Now, back to the iPhoto Window and gp Photos -> Duplicate
You now have a second snap in the Event -> My Photo - version 2
Select Version 2 and go File -> Reveal in Finder -> Original
Notice that it brings you to the same file.
So, you've duplicated the Photo, not the file.
Regards
TD

How to interface a tuxedo app with another application that uses tcp/ip socket messaging

How would you interface a tuxedo app with another application that
uses tcp/ip socket messaging? I have a vendor product that offers
a tcp/ip message interface, and would like to know how best to
integrate it into a tuxedo application. I could write a C application
that listens and accepts incoming request from the vendors application,
and then make a tuxedo client call to a service. But this doesn't
allow me to control the listen thread through tuxedo. The C application
would have to be started seperately and would not take advantage
of the tuxedo restart facilities etc of a tuxedo service.

You can make an empty server only with tpsvrinit that starts your client
listeners and a tpsrvdone that stops them. Be carefull with sharing ipcs
between processes, or your clients may get puzzled!!!
Another choice can be builting a custom WSL/WSH but I haven't done
this yet and I don't know exactly the troubles related with making them.
R.G.
Travis Ward wrote:
How would you interface a tuxedo app with another application that
uses tcp/ip socket messaging? I have a vendor product that offers
a tcp/ip message interface, and would like to know how best to
integrate it into a tuxedo application. I could write a C application
that listens and accepts incoming request from the vendors application,
and then make a tuxedo client call to a service. But this doesn't
allow me to control the listen thread through tuxedo. The C application
would have to be started seperately and would not take advantage
of the tuxedo restart facilities etc of a tuxedo service.

Open with another application

Is it possible to open a photo with another application, without a pre-conversion to tiff by Lightroom? I love Active D-Lighting, it saves me a lot of shadow/highlight recovery, but Lightroom doesn't support it. I edit most of my photos with Capture NX, but I use Lightroom to catalog them and edit others. I can't find a way of opening a nef file directly in CaptureNX from Lightroom.
Thank you.

You can open a photo with another application, but not from within Lr (except for Photoshop). You can open NEF on Capture NX by locating it in your OS (Mac Finder / Win Explorer) and go <Open with> but there is no way to do that from within Lr.
And, when you open a NEF in Capture NX that has previously been edited in Lr the edits will not be visible in Capture NX. And the vice versa is also true: if you edit a photo inCapture NX these edits will not be visible in Lr.
This is so because both programs write the edits in a proprietary format that can only be read by the program writing it. Apart from that Lr stores the edits in its catalog which can only be read by Lr.
It all comes down to the following: You either edit in Lr or you edit in Capture NX, but a cross-over editing is not possible - unless you create a TIF after the edit and open that in the other program. By creating a TIF the edits are written into the image pixels which then can be read by any photo editing software - if it can open and read TIfs that is.
BTW: The Active D-Lighting works only if you shoot JPGs - as far as I know. Far better would be to shoot Raw and edit the highlights in Lr.

What all information will i loose if I sync iPhone with another computer?

Hey,
Just wanted to understand what all information will i loose if i sync my iphone with another computer?
will i loose my contacts and messages?
Thanks
Cheers
Divesh

Syncing your iPhone with iTunes on another computer will not erase all data on your iPhone. SMS/MMS will not be touched, photos/video in your iPhone's Camera Roll, the same for notes, email accounts, and iPhone settings.
In regards to iTunes content, an iPhone can be synced or manually managed with an iTunes library on a single computer only, and photos can be transferred from a single computer only. When transferring iTunes content and photos from another computer, all iTunes content and photos transferred from a different computer will be erased from the iPhone first with a warning message provided indicating this will happen.
You can sync contacts, calendar events, and Safari bookmarks with the supported applications on multiple computers.
You can transfer iTunes content and photos from one computer along with syncing contacts, calendar events, and Safari bookmarks with the supported applications.
When connecting your iPhone to iTunes on another computer, you will be provided a warning message that your iPhone has been synced with iTunes on another computer. If you don't select to transfer any iTunes content or photos from another computer, no iTunes content and photos that were transferred from a different computer will be erased from your iPhone. If you select to sync contacts, calendar events, and Safari bookmarks only with the supported applications on another computer, only this data will be touched on your iPhone.

How do I re-sync my iPad with iTunes on my computer? It is saying the iPad is sync'd with another iTunes account.

Is there someone online that can help me with sync problems between my iPad2 and my iTunes on the desktop. Running MS Windows 7.

Have you ever synced with this computer before? If you did, have you synced with another computer since then?

Interaction with another applications

Hi:
I would like to know if exists any posibility of communicate
or interact my flash app with another non-flash application (for
example using JNI or any kind of median layer between my flash app
and another app).
Thanks

Hi there,
Yes it is possible. You can use FSCommand("launch") to do
this.
///example:
The following example would open wap.yahoo.com on the
services/Web browser on Series 60 phones:
on(keyPress "9") {
status = fscommand("launch",
"z:\\system\\apps\\browser\\browser.app,
http://wap.yahoo.com");
Hope this helps,

TS4002 Trying sync calendars with another IPhone 5?

We have iCloud and if I follow the instructions it says to select an iCloud calendar to share with another. But all of my calendar info is in my hotmail calendar which is not an iCloud calendar. I don't want to re-enter everything and it seems that the hotmail calendar is my default calendar. I really need to be able to sync calendars with my husband's phone. That's one of the main reasons we got the iPhone! Please help!

Why does your Mac not have icloud?
Sync them via the cable and itunes.
Open itunes, connect iphone, select what you want, sync.
iPhone User Guide (For iOS 6 Software)

Syncing iCal with another person

Is it possible to sync an iCal calendar with another user that does not use MobileMe or even a Mac? I do have a MobileMe account but my friend does not, nor does he use a Mac. I would like to be able to access his calendar and somehow get his onto mine as an iCal calendar. Can this work if he used a Google calendar or would I need to buy some third party software, like BusyCal, in order to do that?

Is it possible to sync an iCal calendar with another user that does not use MobileMe or even a Mac? I do have a MobileMe account but my friend does not, nor does he use a Mac. I would like to be able to access his calendar and somehow get his onto mine as an iCal calendar. Can this work if he used a Google calendar or would I need to buy some third party software, like BusyCal, in order to do that?

Sync Logic with another application

Similar Messages

Maybe you are looking for