Sync macbook pro data only to external drive

How can I sync the data (not only music and movies in iTunes but also documents from Pages, Keynote, Numbers, pdf, photos and etc) to an external USB drive?  I only want to sync those data and not backup the whole system.  If I delete the data on  my macbook, it should also delete from the external drive.  Is there any software?  Something like DropBox concept.  I tried the Time Machine but it seems that it can only do whole system backup.
Appreciate options and opinions.  Thank you so much!

Will it work if you were to run Windows as a VM?
I just picked up a nice USB3 250GB pocket drive that is affordable $160.
You can install your programs and use the external device, and it is light and small and gets around 90MB/sec which should be fine using it for programs and data. you could have NTFS and use some of it as HFS+
MyDigitalSSD 256GB PocketVault
http://www.amazon.com/gp/product/B00E3WWFD6/

Similar Messages

  • MacBook Pro won't recognize external drive via usb, will recognize same drive by firewire.

    Title pretty much sums it up. I've had an external firewire 800 drive (Iomega eGo) for about 2 years now. I've got it partitioned and am using part as a time machine backup and the rest as a data storage/ data moving partition. A few days ago I realized that any data I put on either partition can't be copied off by either my computer or either of my two friend's MacBook Pros. The copy starts fine, but then always screeches to a halt around 5% (this is via firewire). This same drive also cannot be recognized via USB by any of our Macs (I plug it in, light comes on, but doesn't blink), but if I plug it into my Windows Desktop the USB recognition is immediate. I found this very strange. I could also copy files off of the drive via USB onto my desktop. If I let it sit long enough on a failed copy on our macbooks eventually it gives me an error code 36. I traced that to a likely hard drive failure on the part of the external. I found this odd because not even 3 days ago I was pulling iTunes songs off the drive onto my desktop with no trouble. Is there any way to fix this via software or the terminal or anything? Disk Utility says both partitions are 'OK'. I'd really like to not spend another chunk of change on an external, as I just spent $180 on a new HDD and SSD for my desktop.
    Thanks in advance,
    Jeremy

    Triple-click anywhere in the line below on this page to select it:
    { diskutil list; echo; diskutil cs list; } | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.
    If any personal information appears in the output, anonymize before posting, but don’t remove the context.

  • The aspect ratio and dimensions of the MPEG-4 movies are distorted horizontally when I transfer them either from my macbook pro or my Lacie external drive to my new iMac.  What can I do?

    I just bought a 27" iMac with an intel core i5 processor.  Most programs and files have tranferred successfully.  The dimensions of the MPEG-4 movie files have been horizontally distorted.  What can I do to correct this problem and prevent the dimension distortion from occurring in the future.

    Hi landonw
    The HD will probably have to be removed from the MacBook Pro and connected to a USB adapter or placed in a dock to get your data off of it. I would take the MacBook Pro along, the folks at the Apple Store should be more than happy to help transfer your data to a new iMac.
    {quote:}All I am really concerned about is my iTunes database and my firefox profiles.{quote}
    What no BACKUP'
    To protect your data in the future, pickup a USB External HD +(for under a $100)+ and use Time Machine.
    Dennis

  • MacBook Pro can´t locate external drives

    Sudenly I got a warning telling me the disk (iPod Classic) wasn't ejected properly (which wasn't ejected at all), now non of my external drives (2 connected through a USB2 hub) are mounted on the desktop, neither from the hub nor directly through the machine's USB ports. The machine is brand new, this is its second day of ussage :'(

    Try resetting your SMC and PRAM.
    Resetting the System Management Controller  >>
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

  • I am trying to restore my old Macbook Pro data using Time Machine on a new Mackbook Air from external hard drive, but when I install I get two different loggin accounts and I only want one loggin account

    I am trying to restore my old Macbook Pro data using Time Machine to a new Macbook Air from an external hard drive, but when I restore I get two diferrent loggin accounts and I only wnat one loggin account to access all my data/files?

    This web site might answer all of your Time machine questions:
    http://pondini.org/OSX/Home.html
    Ciao.

  • Is there any way to restore data from an external drive to another external drive without using the macbook pro you backed up?

    Is that I sold my macbook pro an the person who bought it needs it quickly so I have an external drive but it is not portable so I bought a portable external drive but it may take a while to arrive so I backed up my data with the external drive that I have in my house but I would like to know if I can restore my data to the new external drive without the macbook pro and just with the external drive of my house to the portable external drive.
    Thank you

    No, that's not possible. A computer is required in order to effect such a transfer. Connect both drives to your computer. You can use Disk Utility to clone one drive to the other. Be sure you first partition and format the new drive:
    Drive Partition and Format
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
    Clone using Restore Option of Disk Utility
      1. Open Disk Utility in the Utilities folder.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Select the destination volume from the left side list and drag
           it to the Destination entry field.
      5. Select the source volume from the left side list and drag it to
          the Source entry field.
      6. Double-check you got it right, then click on the Restore button.
    Destination means the new external drive. Source means the old external drive.

  • I have a macbook pro with only 128gb of hard drive. I have lightroom installed and all my photos on an external hard drive. Can I store my lightroom library on the external hard drive too?

    I have a macbook pro with only 128gb of hard drive. I have lightroom installed and all my photos on an external hard drive. Can I store my lightroom library on the external hard drive too?

    Yes. Find the LR catalog file by looking in Edit/Catalog Settings/General. Close LR and navigate to that spot. The catalog file is the one that ends in .lrcat - move it to wherever you want. Next to the .lrcat file is a subfolder called Previews.lrdata. You can move that over as well, but if you don't LR will generate new previews. Double-click on the .lrcat file in its new home and LR will open with that catalog. Set Preferences to When Starting Up Use Most Recent Catalog.

  • My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you

    My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you think it is? It won't recognize any hard drive I put in the machine, so might it be the sata cable?

    Boot the Recvoery USB, use Disk Utility to select the internal drive makers namea and size on the left.
    Now select erase and select the midde option and click erase, it will take a bit to complete but it's best for the drive.
    Now select Partiton tab, click the big box and Options: GUID and then Format: OS X Extended journaled and click apply.
    Quit and you should be able to install OS X now with your Apple ID and password.
    see
    http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/

  • How do I move pictures from my MacBook Pro to a USB/External Hard drive?

    I can't figure out how to trasfer pictures and files from my MacBook Pro to my USB hard drive. Help please?

    We could use a little more information, are you trying to move from a folder to an external drive? Or are you moving from IPhoto.
    Either way should be able to select the pictures you want and drag them to your external.
    If you have not used the drive before you may need to format the external drive with Disk Utility. You will need to choose a catalog method and what you choose should depend on if you plan to use a Mac only, or Mac and PC.

  • Is it possible to sync time capsule data to a external hard drive

    Is it possible to sync time capsule data to a external hard drive connected to time capsule via usb. (as an precaution just incase time capsule fails)
    Thanks

    Yes, if the USB drive has been previously formatted correctly in Mac OS Extended (Journaled) format.
    Open AirPort Utility - Click Manual Setup
    Click the Disks icon
    Click the Disks tab below the icon
    Click Archive
    Allow plenty of time for the copy process to occur. You will not be able to make Time Machine backups from your Mac until the Archive process has completed.

  • Hi, I have a macbook pro with a new hard drive installed. My WD external drive backup on time machine now wont let me access the files. I get a prompt saying 'you do not have permission to access the files'

    hi, I have a macbook pro with a new hard drive installed and restored. My WD external drive backup on time machine now wont let me access the files. I get a prompt saying 'you do not have permission to access the files' After my new drive was installed I plugged in time machine and it started backing up. I paused it when I realised that it was running for more than a few minutes. I now realise that it probably started backing up the new hard drive all over again. Which makes me think that the original back up must be on the WD back I cant seem to access it. Any ideas would be helpful.

    See E-10 in the first link.
    Time Machine Troubleshooting
    Time Machine Troubleshooting Problems

  • Can the apple external disc drive that I just got for my air also work with my late 2007 macbook pro?  The internal disc drive broke after apple care expired, natch.

    Can the apple external disc drive that I just got for my air also work with my late 2007 macbook pro?  The internal disc drive broke after apple care expired, natch.

    No, sorry. it won't work with the 2007 MBP. You can replace the optical drive yourself - just go shopping at OWC.
    Good luck,
    Clinton

  • Transfer music from PC to Mac using data disks or external drive?

    I have my iPhone synced with my office computer (a PC running XP Pro) and originally had my iPad synced with the same PC computer.
    But now I synced my iPad with my Macbook pro at home.
    Is there anyway to transfer the music and playlists via data disks (or external drive) from the office PC to the home Macbook?
    If so, can you please tell me very slowly how to do that. What do I need to transfer and what is the file called, etc... I'm not very familiar with PCs (I'm more of a Mac person).
    Thanks in advance,
    Anne

    Open iTunes and go to Store>Authorise Computer or play a purchased song in iTunes. If the computer has not yet been authorised, iTunes asks you to enter the Apple ID and password you used to purchase the song:
    About iTunes Music Store Authorisation and Deauthorisation
    iTunes Music Store - Authorization FAQ

  • How to Make my Macbook Pro's internal HDD external, when I get a SSD?

    Hey, I know there are other posts on what enclosure you can use and if it's a possibility, but I haven't seen any that tell me how I get OS X on the SSD without a disc? Can I download the installer on a flash drive somehow? Also, I am wondering if this really is a good idea, using my Macbook Pro's HDD for a backup HDD, instead of buying one? I have no use for it anyway, if and when I get a new SSD. BTW, the HDD is the upgraded factory 500gb 7200rpm. Also, do you think it's smarter to have a bigger backup drive than internal drive? In other words, I would like to get a 1TB Samsung 850 Pro SSD, and my current HDD is only 500GB.... I am a musician and need a lot of storage for musical purposes. I use Final Cut Pro, Logic Pro X, Ableton Live 9, Office, and Photoshop.... My Macbook Pro is a Late 2011 Macbook Pro 15.4' 2.2ghz quad core i7 8gb RAM. Oh yeah and a mother thing is, I think I should get an enclosure that has a thunderbolt port with usb, what are your thoughts?

    How to Make my Macbook Pro's internal HDD external, when I get a SSD?
    Get an externel enclosure at the same time.
    You can order from OWC
    http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    Put the SSD in the externel enclosure and use something like Carbon Copy Cloner,  to clone the internal drive and all it content to the SSD.  Then swap them out.
    Always good to have more than one backup.

  • I purchased a Seagate 3T HD for my MacBook Pro but only Windows are listed n the bix (the Seagate site listed Mac) will it work???

    I purchased a Seagate 3T HD for my MacBook Pro but only Windows are listed on the box (the Seagate site listed Mac) will it work???

    Most external drives are formatted for Windows; you should be able to format it for Mac. Plug it in, open Disk utility, highlight the drive and choose the Partition tab. Do not worry about any software on the drive - you don't need it and it will be erased. In the partition tab, choose how many you want, name them, choose Mac OS Extended (Journaled) and, under the Options button, choose GUID partition scheme. Hit Apply. The drive will be erased and formatted. If that process does not work, contact Seagate and inquire about the Mac compatibility.

Maybe you are looking for