Sync - merge - what EXACTLY do these terms mean?
Howdy. I recently plunged into the iPhone world & I'm LOVING IT!!!!!!
So, what exactly does SYNC & MERGE mean? what will be the final results?
with my iPod shuffle, I'm able to "auto fill" from a folder of pre-selected podcasts in iTunes. After listening to the iPod for awhile, I reconnect the iPod to iTunes (on the computer) & the podcasts in iTunes are updated as with actions taken on the iPod. for example, iTunes on the computer will indicate wether or not I listened to these particular podcasts on the iPod or not, & will also remember where I left off. So it seems that the iPod updates iTunes on the computer.
But, ... this does NOT seem to be the same with the iPhone. It seems like when I plug in my iPhone to the computer & "sync", iTunes isn't updated as to what I already watched on the iPhone, like the iPod did. In order to update iTunes with what i already watched on the iPhone, I need to manually delete the vidcasts from the iTunes on the computer, which seems like a step back from my little iPod shuffle.
ALSO: if I change contact information on my iPhone, will this updated info be lost when I connect the iPhone to the Computer?
So what exactly does SYNC & MERG mean?
It seems that the iPhone reacts differently for different media. I'm very confused & I wish there was a place to understand all this without the generic "sync" word being used without explanation. does sync mean replace, update, ... ????
I've been searching around the net for this info for awhile, but all I find is these terms, without sufficient information as to what exactly MERGE & SYNC actually do.
Can someone suggest some place that explains this in the detail I'm looking for?
Thanks so much.
Jesse Luke
Under the Podcasts tab for your iPhone sync preferences, there are various options. I have sync all unplayed episodes of selected podcasts to be transferred to my iPhone. If I listen to an podcast on my iPhone in it's entirety, the podcast will be removed from my iPhone when syncing with iTunes.
The iPhone includes a sync process - some of the data included with the sync process is a one way transfer process only from your computer to your iPhone such as iTunes music, and the same for selected photos to be transferred from your computer to your iPhone.
The sync process for contact info, calendar events, and Safari bookmarks with the supported applications on your computer is a bidirectional or true sync process. When syncing an iPhone for contact info the first time with a supported application on your computer that includes contact info, you will be provided a merge prompt if your iPhone includes any contact info that was manually entered in your iPhone's address book. This will merge the contact info between the two. After the first sync or merge for this data, it will be a bidirectional or true sync process. Change info for a contact on your iPhone, and the info will be changed for the contact info with the supported address book on your computer when followed by a sync, and vice-versa. Add a new contact with the supported address book on your computer, and the new contact will be transferred to your iPhone's address book during the next sync, and vice versa. The same applies to calendar events when syncing with a supported calendar app on your computer.
Similar Messages
-
What Exactly Do These Mean?
He�ll;
I just was having on something that has been there for a while. I have never set my mac up for filled saying, but there is one of those little committee scene comes under the "hard" plane. Sometimes there are 2 there. But I just last night I obtained the little "hard love" and the little "amount income" at the about of my the fine window. Then I obtained the "cannot as" but, and like on it, and it gave me on of those little window that says "Center your use name and answer to across the fire serve "showed" Cannot as get or either use. The Either Use do is chance, and my name is written under name. I have never touch� this window until last night, and I don't want to put in my answer if I don't know what it does. And again, sometimes there are 2 of these little amount window comes in the left plane in the HARD thing. I obtained these the first time short after I placed to Prepared. I fear to try to passed exactly what these are and what the do, cause I don't want to described them income. So, what are they and what do they do?
Less,
AmongIt means that you are not using a program properly. You are being told to insert the Disc that came with your machine and use Disc Utility to format the MacIntosh HD device. It will provide you with quite a bit of free time.
-
ReSampling? Hot Swapping? What do these terms mean?
After years of digital audio I still run into terms that don't really mean anything specific to me.
Could someone shed some light on what these two things refer to?
Thanks a bunch!eMagnus wrote:
After years of digital audio I still run into terms that don't really mean anything specific to me.
Could someone shed some light on what these two things refer to?
Thanks a bunch!
"Sampling" refers to those extravagant food fairs where you can stroll about and sample cuisine from different countries.
And Hot Swapping... that's for swingers only!
Very loose explanations follow.
Sampling.... the act of digitally recording a sound source or part of a sound source for use as either an instrument or effect. Drum libraries like Addictive Drums or some of the kits/instruments included with Logic are "sampled".
Recording each part of a real drum set (or -any- instrument) and then building an instrument out of it is sampling. You can even sample samples..
Hot Swapping has to do with plugging/unplugging USB or Firewire devices while the computer/device is still on. Hot swappable devices are supposed to be recognized by the host machine when plugged in.
pancenter- -
One computer at COMPANY-A is attempting to communicate with two
computers located at COMPANY-B, via an IPsec tunnel between the
two companies.
All communications are via TCP protocol.
All devices present public IP addresses to one another, although they
may have RFC 1918 addresses on other interfaces, and NAT may be in use
on the COMPANY-B side. (NAT is not being used on the COMPANY-A side.)
The players:(Note: first three octets have been changed for security reasons)
COMPANY-A computer 1.2.3.161
COMPANY-A router 1.2.3.8 (also IPsec peer)
COMPANY-A has 1.2.3.0/24 with no subnetting.
COMPANY-B router 4.5.6.228 (also IPsec peer)
COMPANY-B computer #1 4.5.7.94 (this one has no issues)
COMPANY-B computer #2 4.5.7.29 (this one fails)
COMPANY-B has 4.5.6.0/23 subnetted in various ways.
COMPANY-B also has 9.10.11.0/24, but it is not involved in the issue.
What works:
The COMPANY-A computer 1.2.3.161 can communicate via the single IPsec
tunnel to COMPANY-B computer #1 4.5.7.94 without problems.
The "show crypto session detail" command shows Inbound/Outbound packets
flowing in the dec'ed and enc'ed positions.
What doesn't:
When the COMPANY-A computer 1.2.3.161 attempts to communicate
via the single IPsec tunnel with the COMPANY-B computer #2 4.5.7.29,
the COMPANY-A router eventually reports five of these messages:
Oct 9 15:24:54.327: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:24:57.327: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:25:03.327: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:25:15.328: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:25:39.329: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:26:27.328: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
and the "show crypto session detail" shows inbound packets being dropped.
The COMPANY-A computer that opens the TCP connection never gets past the
SYN_SENT phase of the TCP connection whan trying to communicate with the
COMPANY-B computer #2, and the repeated error messages are the retries of
the SYN packet.
On the COMPANY-A side, this IPsec configuration has been set up on a 3745,
a 3725, and some 76xx routers were tried, all with similar behavior,
with packets from one far-end computer passing fine, and packets from
another far-end computer in the same netblock passing through the same
IPsec tunnel failing with the "failed SA identity" error.
The COMPANY-A computer directs all packets headed to COMPANY-B via the
COMPANY-A router at 1.2.3.8 with this set of route settings:
netstat -r -n
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
4.5.7.0 1.2.3.8 255.255.255.0 UG 0 0 0 eth3
1.2.3.8.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3
10.1.0.0 0.0.0.0 255.255.240.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3
10.0.0.0 10.1.1.1 255.0.0.0 UG 0 0 0 eth0
0.0.0.0 1.2.3.1 0.0.0.0 UG 0 0 0 eth3
The first route line shown is selected for access to both COMPANY-B computers.
The COMPANY-A router (IPsec tunnel endpoint, 1.2.3.8) has this
configuration:
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
lifetime 28800
crypto isakmp key XXXXXXXXXXXXXXXXXXXXXXX address 4.5.6.228
crypto ipsec security-association lifetime seconds 86400
crypto ipsec transform-set COMPANY-B01 esp-3des esp-sha-hmac
crypto map COMPANY-BMAP1 10 ipsec-isakmp
description COMPANY-B VPN
set peer 4.5.6.228
set transform-set COMPANY-B01
set pfs group2
match address 190
interface FastEthernet0/0
ip address 1.2.3.8 255.255.255.0
no ip redirects
ip virtual-reassembly
duplex auto
speed auto
no cdp enable
crypto map COMPANY-BMAP1
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 1.2.3.1
ip route 10.0.0.0 255.0.0.0 10.1.1.1
ip route 1.2.3.8.0 255.255.255.0 FastEthernet0/0
access-list 190 permit ip host 1.2.3.161 4.5.7.0 0.0.0.255
access-list 190 permit ip host 1.2.3.161 9.10.11.0 0.0.0.255
bridge 1 protocol ieee
One of the routers tried had this IOS/hardware configuration:
Cisco IOS Software, 3700 Software (C3725-ADVIPSERVICESK9-M), Version 12.4(25c),
RELEASE SOFTWARE (fc2)
isco 3725 (R7000) processor (revision 0.1) with 115712K/15360K bytes of memory.
Processor board ID XXXXXXXXXXXXXXX
R7000 CPU at 240MHz, Implementation 39, Rev 3.3, 256KB L2 Cache
2 FastEthernet interfaces
4 ATM interfaces
DRAM configuration is 64 bits wide with parity disabled.
55K bytes of NVRAM.
31296K bytes of ATA System CompactFlash (Read/Write)
250368K bytes of ATA Slot0 CompactFlash (Read/Write)
Configuration register is 0x2102
#show crypto sess
Crypto session current status
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
Active SAs: 2, origin: crypto map
IPSEC FLOW: permit ip host 1.2.3.161 9.10.11.0/255.255.255.0
Active SAs: 0, origin: crypto map
#show crypto sess det
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, X - IKE Extended Authentication
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500 fvrf: (none) ivrf: (none)
Phase1_id: 4.5.6.228
Desc: (none)
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
Capabilities:(none) connid:1 lifetime:06:26:27
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
Active SAs: 2, origin: crypto map
Inbound: #pkts dec'ed 651 drop 16 life (KB/Sec) 4496182/23178
Outbound: #pkts enc'ed 574 drop 2 life (KB/Sec) 4496279/23178
IPSEC FLOW: permit ip host 1.2.3.161 9.10.11.0/255.255.255.0
Active SAs: 0, origin: crypto map
Inbound: #pkts dec'ed 0 drop 0 life (KB/Sec) 0/0
Outbound: #pkts enc'ed 0 drop 0 life (KB/Sec) 0/0
The COMPANY-B device on their end of the IPsec VPN is a Juniper SSG1000
Version 6.1 (ScreenOS)
We only have a limited view into the Juniper device configuration.
What we were allowed to see was:
COMPANY-B-ROUTER(M)-> sh config | incl COMPANY-A
set address "Untrust" "oss-COMPANY-A-1.2.3.161" 1.2.3.161 255.255.255.255
set ike gateway "COMPANY-A-1-GW" address 1.2.3.8 Main outgoing-interface "ethernet2/1" preshare xxxxxxxxxxxxxxxxxxxxxx proposal "pre-g2-3des-sha"
set vpn "COMPANY-A-1-IKE" gateway "COMPANY-A-1-GW" no-replay tunnel idletime 0 proposal "g2-esp-3des-sha-28800"
set policy id 2539 from "Untrust" to "Trust" "oss-COMPANY-A-1.2.3.161" "9.10.11.0-24" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309a pair-policy 2500
set policy id 2500 from "Trust" to "Untrust" "9.10.11.0-24" "oss-COMPANY-A-1.2.3.161" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309a pair-policy 2539
set policy id 2541 from "Trust" to "Untrust" "4.5.7.0-24" "oss-COMPANY-A-1.2.3.161" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309b pair-policy 2540
set policy id 2540 from "Untrust" to "Trust" "oss-COMPANY-A-1.2.3.161" "4.5.7.0-24" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309b pair-policy 2541
COMPANY-B-ROUTER(M)->
I suspect that this curious issue is due to a configuration setting on the
Juniper device, but neither party has seen this error before. COMPANY-B
operates thousands of IPsec VPNs and they report that this is a new error
for them too. The behavior that allows traffic from one IP address to
work and traffic from another to end up getting this error is also unique.
As only the Cisco side emits any error message at all, this is the only
clue we have as to what is going on, even if this isn't actually an IOS
problem.
What we are looking for is a description of exactly what the Cisco
IOS error message:
IPSEC(epa_des_crypt): decrypted packet failed SA identity check
is complaining about, and if there are any known causes of the behavior
described that occur when running IPsec between Cisco IOS and a Juniper
SSG device. Google reports many other incidents of the same error
message (but not the "I like that IP address but hate this one" behavior),
and not just with a Juniper device on the COMPANY-B end, but for those cases,
not one was found where the solution was described.
It is hoped that with a better explanation of the error message
and any known issues with Juniper configuration settings causing
this error, we can have COMPANY-B make adjustments to their device.
Or, if there is a setting change needed on the COMPANY-A router,
that can also be implemented.
Thanks in advance for your time in reading this, and any ideas.Hello Harish,
It is believed that:
COMPANY-B computer #1 4.5.7.94 (this one has no issues)
COMPANY-B computer #2 4.5.7.29 (this one fails)
both have at least two network interfaces, one with a public IP address
(which we are supposedly conversing with) and one with a RFC 1918 type
address. COMPANY-B is reluctant to disclose details of their network or
servers setup, so this is not 100% certain.
Because of that uncertainty, it occurred to me that perhaps COMPANY-B
computer #2 might be incorrectly routing via the RFC 1918 interface.
In theory, such packets should have been blocked by the access-list on both
COMPANY-A router, and should not have even made it into the IPsec VPN
if the Juniper access settings work as it appears they should. So I turned up
debugging on COMPANY-A router so that I could see the encrypted and
decrypted packet hex dumps.
I then hand-disassembled the decoded ACK packet IP header received just
prior to the "decrypted packet failed SA check" error being emitted and
found the expected source and destination IP addresses (4.5.7.29 and 1.2.3.161),
in the unecapsulated packet. I also found the expected port numbers of the TCP
conversation that was trying to be established in the TCP header. So, it
looks like COMPANY-B computer #2 is emitting the packets out the right
interface.
The IP packet header of the encrypted packet showed the IP addresses of the
two routers at each terminus of the IPsec VPN, but since I don't know what triggers
the "SA check" error message or what it is complaining about, I don't know what
other clues to look for in the packet dumps.
As to your second question, "can you check whether both encapsulation and
decapsulation happening in 'show crypto ipsec sa'", the enc'ed/dec'ed
counters were both going up by the correct quantities. When communicating
with the uncooperative COMPANY-B computer #2, you would also see the
received Drop increment for each packet decrypted. When communicating
with the working COMPANY-B computer #1, the Drop counters would not
increment, and the enc'ed/dec'ed would both increment.
#show crypto sess det
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, X - IKE Extended Authentication
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500 fvrf: (none) ivrf: (none)
Phase1_id: 4.5.6.228
Desc: (none)
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
Capabilities:(none) connid:1 lifetime:07:59:54
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
Active SAs: 2, origin: crypto map
Inbound: #pkts dec'ed 376 drop 5 life (KB/Sec) 4458308/28784
Outbound: #pkts enc'ed 401 drop 3 life (KB/Sec) 4458308/28784
Attempt a TCP communication to COMPANY-B computer #2...
show crypto sess det
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, X - IKE Extended Authentication
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500 fvrf: (none) ivrf: (none)
Phase1_id: 4.5.6.228
Desc: (none)
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
Capabilities:(none) connid:1 lifetime:07:59:23
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
Active SAs: 2, origin: crypto map
Inbound: #pkts dec'ed 376 drop 6 life (KB/Sec) 4458307/28753
Outbound: #pkts enc'ed 402 drop 3 life (KB/Sec) 4458307/28753
Note Inbound "drop" changed from 5 to 6. (I didn't let it sit for all
the retries.)
#show crypto ipsec sa
interface: FastEthernet0/0
Crypto map tag: COMPANY-BMAP1, local addr 1.2.3.8
protected vrf: (none)
local ident (addr/mask/prot/port): (1.2.3.161/255.255.255.255/0/0)
remote ident (addr/mask/prot/port): (4.5.7.0/255.255.255.0/0/0)
current_peer 4.5.6.228 port 500
PERMIT, flags={origin_is_acl,}
#pkts encaps: 402, #pkts encrypt: 402, #pkts digest: 402
#pkts decaps: 376, #pkts decrypt: 376, #pkts verify: 376
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0
#pkts not decompressed: 0, #pkts decompress failed: 0
#send errors 3, #recv errors 6
local crypto endpt.: 1.2.3.8, remote crypto endpt.: 4.5.6.228
path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0/0
current outbound spi: 0xDF2CC59C(3744253340)
inbound esp sas:
spi: 0xD9D2EBBB(3654478779)
transform: esp-3des esp-sha-hmac ,
in use settings ={Tunnel, }
conn id: 2004, flow_id: SW:4, crypto map: COMPANY-BMAP1
sa timing: remaining key lifetime (k/sec): (4458307/28600)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
inbound ah sas:
inbound pcp sas:
outbound esp sas:
spi: 0xDF2CC59C(3744253340)
transform: esp-3des esp-sha-hmac ,
in use settings ={Tunnel, }
conn id: 2003, flow_id: SW:3, crypto map: COMPANY-BMAP1
sa timing: remaining key lifetime (k/sec): (4458307/28600)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
outbound ah sas:
outbound pcp sas:
The "send" errors appear to be related to the tunnel reverting to a
DOWN state after periods of inactivity, and you appear to get one
each time the tunnel has to be re-negotiated and returned to
an ACTIVE state. There is no relationship between Send errors
incrementing and working/non-working TCP conversations to the
two COMPANY-B servers.
Thanks for pondering this very odd behavior. -
What exactly are these parts that they replaced?
Okay, so I just got my MacBook about 20 minutes ago from a main logic board replacement. Only, it says all these other things that were replaced as well. Can someone tell me WHAT they are?
SVC, Bezel, M42, PCB, 2.0GHZ DC, SMS/KIONI, Heatsink
Any ideas? I am clueless. The only thing I could really make out was that the main logic board and the topcase were reaplaced as well.(blushes) I would love to for sure, but I don't have the internet on my Mac yet. You see, I've been in the stone ages with my PC, using AOL...dial up! Yes, I know, who really usues dial up anymore? But it's so easy, and I never had any real need to have wireless. Anywho, I cannot seem to configure AOL to work on the MacBook with a dial up, so I am forced to use my PC (which I am on right now)for my internet needs until I start school again in a couple of weeks (have a free ethernet connection in my dorm room).
Is this something I can download onto my PC, burn to a disc, and THEN transfer it to my MacBook? Or is that totally unheard of and crazy?
Thanks for the help!! -
What exactly does private browsing mean ?
Does this mean you can't be tracked even though your using through wifi ?
Thanks, Yowsayowsa. My second reply wasn't aimed at you, by the way, in case you though it was. I was asking Seventy One what s/he meant and what more s/he felt was expected. Glad you found that Apple article helpful.
As to this statement:
I also just read an article about how certain apps are leaving the security up to apple ,which has made apple more vulnerable.
I'm not certain what that article might be referring to. If you can provide the URL to the article, we can then probably comment and perhaps clarify.
Regards.
Message was edited by: varjak paw -
BT Hub3 - What Exactly Does 'Connection time' Mean...
I recently changed from using a BT HomeHub2 to a BTHub3 as part of efforts to fix a problem with the intermittent collapse in upstream speed to a value so low as to effectively be zero. I'm monitoring the ADSL Line Status daily using the Hub Manager's Advanced Settings, and so far there has been no recurrence. However I am seeing some fluctuation in my downstream speed, and in the value of the metrics that influence this, such as Noise Margin, Line Attenuation and Power (in each case these are quoted for both Down and Up).
I have it on good authority that my service is delivered using ADSL2+, which is a rate-adaptive technology and hence this fluctuation is neither a surprise nor an issue, but it appears that each time the downstream speed and - usually - the associated metrics change, the "Connection time" is also being reset.
Can anyone tell me if this is a) what is actually happening and b) sensible?
If I understand correctly BT's RamBo system (Rate Adaptive Management Box) monitors the physical characteristics of my line, and will apply a different profile to it in response to changes, but does this process necessitate dropping and reinitialising the connection? If it does then I suppose that the "Connection time" should be reset to zero, but to me, it would seem more sensible to only reset the "Connection time" if the hub itself was actually reset, either manually or as a result of problems with its software.
TIA!050413 09:31
Connection information
Line state: Connected
Connection time: 0 day, 23:04:41
Downstream: 3,776 Kbps
Upstream: 448 Kbps
ADSL settings
Noise margin (Down/Up): 5.3 dB / 21.0 dB
Line attenuation (Down/Up): 52.5 dB / 31.5 dB
Output power (Down/Up): 19.1 dBm / 12.6 dBm
FEC Events (Down/Up): 0 / 1
CRC Events (Down/Up): 1117 / 11
060413 10:56
Connection information
Line state: Connected
Connection time: 2 days, 00:29:58
Downstream: 3,776 Kbps
Upstream: 448 Kbps
ADSL settings
Noise margin (Down/Up): 4.9 dB / 21.0 dB
Line attenuation (Down/Up): 52.5 dB / 31.5 dB
Output power (Down/Up): 19.1 dBm / 12.6 dBm
FEC Events (Down/Up): 0 / 4
CRC Events (Down/Up): 2470 / 66
070413 10:24
Connection information
Line state: Connected
Connection time: 2 days, 23:58:08
Downstream: 3,776 Kbps
Upstream: 448 Kbps
ADSL settings
Noise margin (Down/Up): 5.0 dB / 21.0 dB
Line attenuation (Down/Up): 52.5 dB / 31.5 dB
Output power (Down/Up): 19.1 dBm / 12.6 dBm
FEC Events (Down/Up): 0 / 9
CRC Events (Down/Up): 4007 / 84
080413 10:21
Connection information
Line state: Connected
Connection time: 3 days, 23:52:30
Downstream: 3,776 Kbps
Upstream: 448 Kbps
ADSL settings
Noise margin (Down/Up): 4.8 dB / 21.0 dB
Line attenuation (Down/Up): 52.5 dB / 31.5 dB
Output power (Down/Up): 19.1 dBm / 12.6 dBm
FEC Events (Down/Up): 0 / 12
CRC Events (Down/Up): 5477 / 146
090413 09:00
Connection information
Line state: Connected
Connection time: 4 days, 22:34:03
Downstream: 3,776 Kbps
Upstream: 448 Kbps
ADSL settings
Noise margin (Down/Up): 4.6 dB / 21.0 dB
Line attenuation (Down/Up): 52.5 dB / 31.5 dB
Output power (Down/Up): 19.1 dBm / 12.6 dBm
FEC Events (Down/Up): 0 / 15
CRC Events (Down/Up): 6936 / 174
100413 09:47
Connection information
Line state: Connected
Connection time: 5 days, 23:21:01
Downstream: 3,776 Kbps
Upstream: 448 Kbps
ADSL settings
Noise margin (Down/Up): 4.5 dB / 21.0 dB
Line attenuation (Down/Up): 52.5 dB / 31.5 dB
Output power (Down/Up): 19.1 dBm / 12.6 dBm
FEC Events (Down/Up): 0 / 17
CRC Events (Down/Up): 8450 / 239
110413 09:29
Connection information
Line state: Connected
Connection time: 6 days, 23:02:20
Downstream: 3,776 Kbps
Upstream: 448 Kbps
ADSL settings
Noise margin (Down/Up): 4.4 dB / 21.0 dB
Line attenuation (Down/Up): 52.5 dB / 31.5 dB
Output power (Down/Up): 19.1 dBm / 12.6 dBm
FEC Events (Down/Up): 0 / 23
CRC Events (Down/Up): 10492 / 285
120413 09:46
Connection information
Line state: Connected
Connection time: 7 days, 23:20:16
Downstream: 3,776 Kbps
Upstream: 448 Kbps
ADSL settings
Noise margin (Down/Up): 4.5 dB / 21.0 dB
Line attenuation (Down/Up): 52.5 dB / 31.5 dB
Output power (Down/Up): 19.1 dBm / 12.6 dBm
FEC Events (Down/Up): 0 / 24
CRC Events (Down/Up): 11815 / 372
130413 11:18
Connection information
Line state: Connected
Connection time: 9 days, 00:52:18
Downstream: 3,776 Kbps
Upstream: 448 Kbps
ADSL settings
Noise margin (Down/Up): 4.6 dB / 21.0 dB
Line attenuation (Down/Up): 52.5 dB / 31.5 dB
Output power (Down/Up): 19.1 dBm / 12.6 dBm
FEC Events (Down/Up): 0 / 24
CRC Events (Down/Up): 14284/ 402
140413 10:04
Connection information
Line state: Connected
Connection time: 9 days, 23:37:40
Downstream: 3,776 Kbps
Upstream: 448 Kbps
ADSL settings
Noise margin (Down/Up): 4.4 dB / 21.0 dB
Line attenuation (Down/Up): 52.5 dB / 31.5 dB
Output power (Down/Up): 19.1 dBm / 12.6 dBm
FEC Events (Down/Up): 0 / 28
CRC Events (Down/Up): 15217/ 450
150413 09:01
Connection information
Line state: Connected
Connection time: 10 days, 22:35:00
Downstream: 3,776 Kbps
Upstream: 448 Kbps
ADSL settings
Noise margin (Down/Up): 4.4 dB / 21.0 dB
Line attenuation (Down/Up): 52.5 dB / 31.5 dB
Output power (Down/Up): 19.1 dBm / 12.6 dBm
FEC Events (Down/Up): 0 / 34
CRC Events (Down/Up): 17028/ 452
160413 09:42
Connection information
Line state: Connected
Connection time: 11 days, 23:15:31
Downstream: 3,776 Kbps
Upstream: 448 Kbps
ADSL settings
Noise margin (Down/Up): 4.4 dB / 21.0 dB
Line attenuation (Down/Up): 52.5 dB / 31.5 dB
Output power (Down/Up): 19.1 dBm / 12.6 dBm
FEC Events (Down/Up): 0 / 43
CRC Events (Down/Up): 19095 / 464
170413 09:38
Connection information
Line state: Connected [Hub Reset at 160413 15:06 – had stayed up 12 days 4 hrs 40 mins]
Connection time: 0 day, 18:32:18
Downstream: 3,712 Kbps
Upstream: 448 Kbps
ADSL settings
Noise margin (Down/Up): 5.1 dB / 21.0 dB
Line attenuation (Down/Up): 53.0 dB / 31.5 dB
Output power (Down/Up): 19.2 dBm / 12.6 dBm
FEC Events (Down/Up): 0 / 1
CRC Events (Down/Up): 952 / 45
180413 09:05
Connection information
Line state: Connected
Connection time: 0 day, 04:42:26 [Hub Reset at 180413 04:23 – had stayed up 1 day 13hrs 17 mins]
Downstream: 3,456 Kbps
Upstream: 448 Kbps
ADSL settings
Noise margin (Down/Up): 7.3 dB / 21.0 dB
Line attenuation (Down/Up): 52.5 dB / 31.5 dB
Output power (Down/Up): 18.6 dBm / 12.6 dBm
FEC Events (Down/Up): 0 / 0
CRC Events (Down/Up): 180 / 0
190413 09:09
Connection information
Line state: Connected
Connection time: 1 day, 04:46:26
Downstream: 3,456 Kbps
Upstream: 448 Kbps
ADSL settings
Noise margin (Down/Up): 6.6 dB / 21.0 dB
Line attenuation (Down/Up): 52.5 dB / 31.5 dB
Output power (Down/Up): 18.7 dBm / 12.6 dBm
FEC Events (Down/Up): 0 / 27
CRC Events (Down/Up): 2274 / 116
200413
Connection information
Line state: Connected
Connection time: 2 days, 07:07:25
Downstream: 3,456 Kbps
Upstream: 448 Kbps
ADSL settings
Noise margin (Down/Up): 6.6 dB / 21.0 dB
Line attenuation (Down/Up): 52.5 dB / 31.5 dB
Output power (Down/Up): 18.7 dBm / 12.6 dBm
FEC Events (Down/Up): 0 / 29
CRC Events (Down/Up): 2980 / 164
<End of Post> -
What exactly is the term "bootstrap"
Can somebody provide a clear explanation to what "bootstrap" means?
Sure. I'll avoid java and just blab about the problem in general.
All computers are designed with some ability to be started at a particular memory address. If there are no instructions in that memory located, well, the computer won't get very far.
Alternatively you could type in - somehow - a very large program. In fact, to do very much - say read from a disk - you might have to type in an awful lot. No fun.
So a challenge is to write a very small amount of code so the computer can start, and have that code load a larger amount of code and jump into it. That's bootstrapping.
A few other random notes:
o Most, if not all, computers are designed so that the lowest level of bootstrap is stored somewhere in read-only memory - no typing required.
o You can view the process of getting a complete operating system - or a runtime system like java - as a bootstrapping operation: Start with something simple and limited, and birng up something complex and powerful. -
(Updated) – what exactly does it imply / mean?
Okay... no wise a$$ ones , i know what 'Updated' means!
What i meant was in the listing, some topics have an "(Updated)" and some don't.So why does that happen? Does it imply that a previous post has been edited?
JJFor some reason it seems to malfunction occasionally in this forum.
Maybe because, in the nature of things, there are more people in here complaining than there are people posting questions in the main forums!
Afternote: Notice that there are more "Sad" and "Angry" emoticons in here than any others? -
What exactly does the "x" mean?
Sometimes when I try to put a transition between two clips - the transition over one or both of the clips has a small "x" (I assume it means it won't take - which it doesn't) The length of the clip doesn't change it - I have lengthened and shortened clips but the transition doesn't take.
Thanks---
DMake sure you have enough handles available on both sides of the edit. Handles are extra material beyond the marked In and Out points that allow the shots to extend to create the overlap for the transition. If there is no available additional material beyond the marked In and Out points then the transition can't happen.
-
Repair permissions what does all these errors mean?
Repairing permissions for “mac”
ACL found but not expected on "System/Library/User Template/English.lproj/Sites".
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
ACL found but not expected on "System/Library/User Template/English.lproj/Desktop".
ACL found but not expected on "System/Library/User Template/English.lproj/Documents".
ACL found but not expected on "System/Library/User Template/English.lproj/Downloads".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Application Support".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Assistants".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/MIDI Drivers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Components".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Digidesign".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/VST".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Alerts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Banks".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/ColorPickers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Compositions".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Favorites".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/FontCollections".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Fonts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Plug-ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Sound Effects".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Input Methods".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Internet Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Keyboard Layouts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Preferences".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Printers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Screen Savers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Voices".
ACL found but not expected on "System/Library/User Template/English.lproj/Library".
ACL found but not expected on "System/Library/User Template/English.lproj/Movies".
ACL found but not expected on "System/Library/User Template/English.lproj/Music".
ACL found but not expected on "System/Library/User Template/English.lproj/Pictures".
ACL found but not expected on "System/Library/User Template/English.lproj/Public".
Permissions differ on "Library", should be drwxrwxr-t , they are drwxrwxr-x .
ACL found but not expected on "Library".
ACL found but not expected on "Applications/Utilities".
ACL found but not expected on "Applications".
Permissions repair completeIgnore it. I suspect they are not actually "errors." You can search the forum for more information, as this topic has been covered several times. Basically, ARDagent.app is used for the iChat screen sharing service, and it was modified with the Apple Remote Desktop update. The "errors" are more likely the way things are supposed to be, but have not been included in the Disk Utilities exceptions list.
Everyone who has done the update has the SUID warning. Most have ACL exceptions on several folders. You seem to have it on a lot, but I wouldn't worry. That's probably exactly how ACL settings are supposed to be for those folders—Disk Utility just doesn't know it yet. -
What exactly are these 'disk permissions'?
is this same as the permissions in 'get info' window of a file? or is it something different. should i verify and repair them often?
Yes. I recommend repairing them before and after installing Apple updates/upgrades.
-
What exactly does "system temperature" mean in bios?
Hi.
I have a Ne0 FIS2R PCB 1 with frequent game crashes & i recently installed asetek´s watercooling kit wich is cooling the cpu & Northbridge.
The bios says the CPU is 34 Degrees Celsius which is perfectly fine.
But the system temperature says 52 Degrees.
Is system temperature the air temperature inside the case? The manual doesn´t say.
Thanks in advance.
/Owe
sys spec:
MSI Ne0 FIS2R
P4 Northwood 3,2 GHz
2*512 Dualchannel PC3200 PNY memory
Sapphire Radeon 9800 Pro
Soundblaster Audigy 2 ZSThe sys temp in the basic temp arround your mobo. (or Inside you case)
That's kinda warm, mine is 35deg/ c and the air temp is 23. -
Can Someone Explain what each of These Entities Mean?
-T_PARAMETER
Thank-you.Where are you seeing this? In debugger?
This.....
Looks like an object reference, at least the first part anyway. You are seeing this in debugger, right?
Regards,
Rich Heilman -
Opening an image editing application for the first time can be intimidating. The more powerful the tool, the more complicated it can be to learn to use. Below are a list of resources to help you get started with the Photoshop Elements Editor.
I just bought Photoshop Elements, where do I start?
There are a lot of directions you can go when you first make your purchase. Here is your first roadmap.
Getting Started Tutorials
What do all these terms mean?
There are some common words tossed around when talking about image editing or tool use. Here is a helpful guide to define these: Photoshop Elements key concepts
Photoshop Element Help Topics:
Workspace basics
Tools
Color and tonal correction basics
Elements Basics, an overview of Elements' essential concepts on Photoshop Elements User.com
Where can I find some tutorials on the web?
There are many resources for learning Photoshop Elements on the internet. Here are some that we recommend.
Photoshop Elements: Where can I find some good basic tutorials? on the Photoshop Feedback site.
Like Photoshop Elements on Facebook for daily tutorials and inspiration. As well as the occasional contest.
Editing Tutorials for Photoshop Elements on Photoshop.com
Getting Started with the Elements Editor on Photoshop Elements User.com
Photoshop Elements for Dummies.com
What about video tutorials?
Some find it easier to watch a product being demonstrated and explained by an expert
Learn Photoshop Elements 11 on Adobe TV
Photoshop Elements channel on YouTube
Where can I find books about learning Photoshop Elements?
Photoshop Elements books on Pearson Peachpit PressHi Christoph and WarriorAnt,
Thank you both for the replies.
I don't know anything about GarageBand because I've never used it. I've never used any music software before, (other than iTunes, Ha!)
I don't have GarageBand on my Mac because it wasn't stock on the old Powerbook G4, so I would have to buy it. I'm happy to do that if I can figure out that it does what I want ... but I'm overwhelmed by the info at Apple's site. Too much for a beginner like me. Even the wikipedia.com entry for GB uses too many terms I don't know, so I'm easily lost.
I just want to be able to set up drum loops and play along with them. The main thing is that I'm able to use third party loops. There are so many really amazing loop products out there ... jungle drums, acoustic jazz drums, lounge, etc. I don't want to get caught up in anything proprietary (like Band-In-A-Box) because the selection is limited. I'm sure GarageBands loops are great, but I want access to all these other third party loops as well ... loops that were not specifically made for GarageBand.
Will GarageBand let me drop in any and all drum loops from these other companies?
And does GarageBand work like a basic sequencer, where I can program up an intro, X number of measures of a loop, then a turnaround, then a variation loop, then an ending, etc?
I know the high-end stuff like Native Instruments Kontakt does this, but unfortunately it also does a kazillion other professional-level things I will never need and don't want to pay for (and which make the software more complex and daunting).
Thank you again, both of you, for responding and helping me with this project.
Just a little more advice on those two questions would really go a long way.
-JOHN
Maybe you are looking for
-
Pacman no longer working...
I did a pacman-optimize, and pacman -Scc just in case this was an issue local to my computer...? I've also tried using the US mirrors rather than the Great Britain mirrors. None of this has had any effect. [bedtimes@seb ~]$ sudo pacman -Suy :: Synchr
-
1 router === 2 ASA (how to connect without switch)
Internet ---- ASR ------ Switch ------- ASA 1 (active) | | | | |---------- ASA 2 (standby) ASR supports B
-
Galaxy5 comcast emails and hang ups
cannot view comcast emails. when i tap to read they disappear. contacted comcast, stated to contact verizon. also, when galaxy 5 rings and I choose to hangup rather than answer, it does not hang up.
-
How to convert XML file to WSDL file
Hi SAP gurus I am trying to create a wsdl file from a BAPI. I have followed all the steps and finally using transaction WSADMIN, I create the webservice. When I select SAVE AS (in the explorer window) it gives me an option with .XML. However, when I
-
I've got a table with 2 columns, the tabel is inside a scroll pane. I want the first table column to be of fixed size and the second column to take up all of the viewports remaining width. I've setAutoResizeMode(JTable.AUTO_RESIZE_OFF) and getColumnM