Sync Multiple Video & Audio Clips

I have a lot of camera clips and multiple audio recordings. None are named to be together but I wanted to sync them all. Tried Plural eyes and it just doesn't get it. Any advice on this? Thanks

Do it manually. Works every time.

Similar Messages

Unlinking multiple Video/audio clips

Coming from FCP I'm used to doing certain things as part of the workflow.   One of these is being able to link / unlink multiple video/audio clips at the same time to that I can selectively delete or disable the audio if I'm running a second audio recorder or perhaps mixing a backing track.
In PPro it seems like as soon as I select more than one clip the 'Unlink' option is grayed.    How can I select (say) 10 clips, unlink the audio from the video so that I can delete or disable it.   The reason for disable is that I may want the ambient sounds later on in the mix, but if I disable this audio without unlinking I also disable the video.
I don't want to keep moving stuff on to more and more audio tracks and then have to mute the track, that's time consuming and a pain.   All I want to do it unlink multiple clips.
This can't be that hard can it ?

You don't need to Unlink in order to Delete. Just hold down the Alt key while selecting the audio portion of the clips.
You can 'disable' the audio by turning off the entire track, which is very easy to undo if you ever want the audio back.
It's a slight shift in work flow, but the end result is the same.

Here is a Tutorial on How to sync Multiple Video and Audio Clips

Check out my Tutorial on How to sync Multiple Video and Audio Clips http://vimeo.com/28972315

Very true ! My main point was to show how easy it was to sync. I still think apple has a way to go to make this a great tool. It was fast to edit but when I want to send somthing to AE 5.5 it was a nightmare. I do I love how it organizes keywords and the color correction tools are good if you want to do it your self (check out this site http://www.colorgradingcentral.com/final-cut-pro-x-color-grading-table-of-conten ts ) it will be a great program if apple listens to all the comments but does not make it too complicated the you cant create quickly.

How do I join multiple (short) audio clips into one single long audio clip in Premiere Pro CS5?

Hello,
The question is in the title but I'm wondering how I can join multiple (short) audio clips into one single long audio clip in PP CS5.5. I put all my short clips right next to each other and selected all of them to see what options are available by right clicking and using the toolbar options at the top. The closest that I got was to nest the sequence, but that's not what I really want.
I'd like to merge all the short clips into one single (long) audio file to use under the video.
Thoughts are welcome and greatly appreciated.
Thanks,
-Melvin

O.K. This is kind of fundamental and you will need to learn up on this fully ...but for now...
Make sure you have the WAB ( work area bar )covering the length of the audio clips. ( You do not need to select them)
Go to the File Menu> Export Media
You will be given all the Export Options. Choose Wave File
Select option for Export Work Area.
Choose where to export the file to ( HD location)
follow your nose from there....
http://tv.adobe.com/watch/learn-premiere-pro-cs5/exporting-with-adobe-media-encoder/
BTW - Why are you taking the audio to Audition anyway? What are you going to do to it.

Sync multiple video clips with one audio track

I'm an FCPX noob, trying to sync some clips. I recorded a 1.5 hour concert with a DSLR along with an audio track using a separate digital recorder. I have seven video clips, all in sequence (stopping and restarting the camera because of clip length limitations) and one long audio track in WAV format. The audio track is longer than the combined video clips, and there are some short dead spaces in between the video clips when I turned off/on. Now I'm trying to sync them but when I do, the video clips get stacked together with lots of overlap.
I made a test with 3 minute video and audio clips and had no problem. But when I try to do the whole event, I get a jumbled mess.
I could cut the audio into pieces and sync each piece with its corresponding video, but that seems to defeat the sync process, as well as being a lot of work. And, wouldn't I end up with lots of overlap anyway, since my audio clips would have to be longer than my video clips?
Am I missing an easier way to do this, or a way to arrange things better? I can't imagine the problems with several cameras and several audio tracks; my project is actually pretty simple, since it is very linear.
Any suggestions? Thanks--

BobFromIN wrote:
Sorry to take so long getting back to you. Thank you for this advice, but I'm not sure I'm doing it correctly. Is there a way to set the angle on all of the clips at the same time?
Yes. Select all the clips you want in the browser, and then in the inspector fill in the camera angle with the value you want. This can be just about anything, it does not have to be a number. I prefer to name it something meaningful, like "wide" or something.

Moving Video & Audio Clips on Timeline

How can I move all video and audio clips on the timeline together? I can select and move all video clips, or all audio clips, but I can't find a way to move everything together. Moving separately will put audio and video out of sync.
Thanks.

Lock the audio to the Playhead first (Advanced menu).
But you should be able to select both video and audio clips together using the usual shift key.

Video/audio clips don't work on BBC news/sport (will on I.Express)

Message 'This does not appear to be working ' om video and audio clips on bbc news ans sports sited.

http://mmonevoice.com/MC1-afiles/MMOV_firstjingle.mp3
Audio source of the file that doesn't work in your page but does work "directly".
The movie worked for me using Safari.
I would expand the page layout so that you don't have a scroll on the "video" side of the page.
Something is covering the movie controller for your audio file and it also covers your "back" link.
I also had trouble downloading any of your Practice Scales. They "paused" for a few minutes before the download began.
Hope this helps you sort out the issues.

Matching Video/Audio Clip Lengths

I import a series of video clips (from 35 mm slides) into the video track time line, each 7 seconds in length with transitions. If desired, I may reorder the sequence of these clips. Then I add voice-over for each clip on an audio track. The voice over time for a particular video clip may run 10-15 seconds. To extend the video clip time to match the length of the audio clip, I set an "in" and "out" marker to match the length of the audio clip, drag the video clip from the Browser to "fit to fill" in the canvas thus extending the time of the video clip. Is there a more efficient way of extending the length of the video clip to match the length of the voice-over clip? Many thanks. Jack A2

Are these still images or video clips? You said they came from slides is why I ask. One way is to use the ripple tool to lengthen the clips in the timeline.

Paste attributes prompt box (only 1st linked video & audio clip)

what is up with that box? how can I avoid this? I need to paste attributes to all 4 audio tracks and not just the 1st one!
The box reads:
Paste Attributes will only use the first video and first linked audio clip for parameters and content to be pasted. Do you wish to continue?

You'll get that warning if you copied more than one clip. The message is telling you that it will only paste the attributes of the first clip of the group you selected.
To avoid that warning, you should only copy ONE clip. After you've copied one clip you can then past the attributes of that clip to as many clips as you select.
-DH

Video-Audio-Clips in CS3 verknüpfen

Bin blutjunger Anfänger und habe CS3 mit Matrox RT X2. Wenn ich meine Clips im Schnittfenster verknüpft darstelle, also mit Unterstrich, dann folgt beim verschieben des Video-Clips auf Spur 2 nicht der Audio-Clip auf Spur 2 nach. Die in der Dokumentation angeführten Funktionsangaben zeigen bei mir keine Wirkung. Ich kann die Clips nach der Markierung nur einzeln verschieben wie wenn die Verknüpfung aufgehoben ist.
Bei Überlagerungen von Effekten liegen dann 2 Audiospuren übereinander. Beim löschen des überlagerten Clips auf Videospur 2 sind dann beide Audiospuren weg.Vielleicht ist die eine sehr panale Frage für das Forum, aber ich stehen damit auf dem Schlauch. Es ist auch meine erste Einstellung und hoffentlich habe ich alles recht gemacht mit meinen 68 Lebensjahren. Wer kann mir dabei helfen? JETZT SCHON VIELEN dANK

Do you not have replace footage when you right click a clip?

Linked video audio clip goes out of sync when put in timeline - why?

Learning to use Final Cut Express. Clip plays in browser with audio in time with video but as soon as clip is dragged onto timeline the audio goes out of sync. Why? Please can anyone help because its driving me mad!

You don't give any details as to FCE's settings, camera format or your workflow so I can only hazard a guess.
One of the main reasons that audio goes out of sync is because the Easy Setup audio settings do not match the camera's audio settings.
The default setting is for 16bit (48KHz) but your camera may be shooting 12bit (32KHz audio).
If this is the case you need to recapture using the 32KHz Easy Setup.

Is there a way to import video/audio clips from Logitech webcam?

I just purchased a used Logitech Quickcam Vision Pro for Mac. A Logitech driver is apparently not required. I connected it to a USB port on my mini. I couldn't find any way of downloading Photo Booth so I downloaded Funny Photographer (http://homepage.mac.com/spillnerclan/fabian/funnyphotographer/Funny%20Photograph er.html).
With Funny Photographer I am able to capture still photos.
Eventually, I intend using the webcam with Skype. In the meantime I would like to capture audio and video clips. This is not possible in iMovie6 (at least with a USB device). Is there a way to do this? Might Quicktime PRO work? Thanks.
Owen

Hi Owen,
I don't know about QT Pro, but Snapz Pro X allows you to effortlessly record anything on your screen, saving it as a QuickTime® movie or...
http://www.ambrosiasw.com/utilities/snapzprox/
BTV allows you to view video from any video input source, either in a window or full screen on an entire monitor. Video can be captured to disk as a standard QuickTime movie file...
http://www.bensoftware.com/btv/index.html

Settings to Export video & audio clip to YouTube

I've followed PREMIER PRO CS3 User Guide's directions (pg. 514-515) to Adobe Media Encoder but cannot get audio of original clip included on encoded clip for uploading to YouTube. Original clip was typical audio/video .avi. Any help will be greatly appreciated here. T2

FAQ:What are the best settings for YouTube?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

I have quicktime player 7.7.2. A relative video clips from his phone. Previously they downloaded with both video and audio. As of Sept. 30 only the audio downloads, yet Quicktime still plays older saved video/audio clips. Help?

I have Quicktime Player 7.7.2. A relative has been sending video clips from his phone since June, and until Sept. 30 both the video and audio would download. SInce that date only the audio downloads, yet I can still open and play the older saved videos just fine. I tried looking at QuickTime help info available. One place said something about purchasing Quick Pro for use with 7.7.2, but if I need that, why can I still open older saved videos? Thanks for any help.

I'm adding more information:
in Finder, my iMovie folders are all visible and accessible. When I click on a clip from iMovie Events folder, Quicktime opens and plays the clip. ALL my video is not missing - it just isn't showing up in the Event Library!
This happened all of a sudden, while I was working on iMovie project (on both computers).
All my Projects are intact, and play when I open them.

How to drag video & audio clip up one track simultaneously?

In 6.5, when I dragged a video clip from Video Track 1 to Video Track 2, the audio automatically followed from Audio Track 1 to Audio Track 2. Not so in Pro 3.0 and I assume 4.0. Can this be changed?

Hi, I am a novice with a similar question.
I have imported HD ACVHD files into Premiere Pro CS4.
When I drag & drop the file into Video 1 on my timeline, the audio automatically defaults into the Audio 4 track.
I want those audio files in Audio 1.
I have tried to unlink each clip and then group the audio files and drag them to Audio 1, but Premiere will not let me do it.
A pair of two-part questions about how I can (and should) accomplish the task:
1. Can I drag & drop the audio files from Audio 4 to Audio 1, and if so, how?
2. Why does it default like this, and what can I do to change the preset?
It's kind-of an urgent matter, so I would appreciate any feedback any experienced users can provide me,
Thanks, D.

Sync Multiple Video & Audio Clips

Similar Messages

Maybe you are looking for