Sync no longer works with new AppleTV update

Since upgrading to the latest AppleTV software, I can no longer sync to my AppleTV (1st gen). I can now only stream content to the AppleTV. There is still content on the AppleTV, but I can no longer manage that content.

MIbanez wrote:
I have the same issue as useEvil....Apple TV gen 1 no longer syncs my musics...it deleted it from the Apple TV and now only streams it. Nonetheless, it did keep my movies, TV shows and photos on the device.
By this point it is clear that Chenks is not being helpful.
Does anyone know how to fix this?
the advice was correct, and you should do the same as already posted.
also, the fact the OP marked the thread as "solved" means that the advice was correct.
however i would suggest you start your own thread, this time in the correct forum.
you don't have a second generation appletv and you don't have a homesharing issue - this is the second generation appletv homesharing forum.

Similar Messages

  • Belkin lightning dock no longer works with iOS8.1 update

    I have the Belkin aluminium dock and since the update to 8.1 it no longer works with my iPhone 5S or 6 plus. I've tried reboots and resets, can't get it to work.
    I just get the 'this accessory may not be supported' message.
    Anyone have a fix for this?

    quit iPhoto, Delete the iPhoto preference file ("your user name" ==> library ==> preferences ==> comn.apple.iPhoto.plist) and launch iPhoto and reset any personal preferences you have changed and if you have moved the iPhoto library repoint to it
    LN

  • Aperture no longer works with new osx Yosemite update

    I installed new OSX Yosemite update and now it says that my Aperture App. will not work with this version. What can be done other than updating Aperture?

    Hi,
    It's a five step process
    Call Apple Support for Software > Aperture
    Answer questions at recorded message (have Aperture serial number ready – it is on a sticker on the back of the 'Installing Your Software' booklet) and you will be transferred to a real person.
    Inform them of the issue and they will tell you that this is a known issue with certain users and they will request a 'Redemption Code' for the App Store for a standalone download of Aperture. The issue will be rectified in the next Yosemite release.
    Wait for email from Support (they have to contact Support in California for redemption code, so depending on your time zone, there may be some delay).
    Visit App Store, enter redemption code, and you are good to go.
    Hope this helps.

  • Apple 23" HD Cinema Display no longer working with new Macbook Pro

    I bought a 23" used HD Cinema display the other day along with the ADC-DVI and DVI-Mini Display adapters. I had it hooked up and it was working perfectly for 3 days. Today my wife tried to connect her Macbook accidentally via the USB that is part of the ADC-DVI adapter which didn't work (why is that USB there anyway?). Then when she went to connect the external display back to my Macbook Pro it did not wake up after being connected. I have tried resetting the PRAM on the MBP and have disconnected and re-connected all connections but nothing will get the display working with the MBP anymore. When I connect and disconnect the mini-display plug into the MBP the MBP flashes the blue screen as it appears to be reacting, but that's it. I can't detect any display when I go into the display system preferences. Does anyone know how I can get the Apple Cinema display working again? Thanks for any help.

    Ryan Nagy wrote:
    Upon reflection, I think my issue is different. Probably should not have posted it here. As it turns out sometimes my display works, sometimes it does not. I think the power adapter has gone bad. A common occurrence here in Mexico where the power can fluctuate quite a bit. - Ryan
    There are couple of long threads in the display section about problems with the power supplies on the 23" HD DVI. See this one for instance: https://discussions.apple.com/message/17981683#17981683
    Mine one day just wouldn't turn on -- connected to an old G4 MDD and the Mini -- a bit of fiddling it would occasionally start up, sometimes not. Similar to what you described, the Macs would see it in System Profiler, but it just wouldn't turn on.
    Based on that thread, I figured the problem was mostly likely the power supply. A local authorized repair place didn't have a spare for me to try, but the tech sniffed it and mentioned it the burnt electronics smell. LOL, I sniffed it and sniffed the power supply for my 20" DVI Cinema display -- indeed a weird smell.
    Based on that thread, I decided to bite the bullet and buy a beefier 150" power supply for the 30" Cinema display, which Apple says in compatible with the 23". See: http://support.apple.com/kb/HT2803
    I hooked it up, crossed my fingers, and it fired up right away. It's been working fine for about 3 months now. Cheaper than buying a new monitor.

  • E3000 keyword blocking no longer working with new 1.0.06 firmware under access restrictions

    I set up some policies that were working fine under 1.0.04 that are no longer working under 1.0.06 b.  I have tried modifying with all sorts of options and nothing is working.  Has anyone else found a combination that works?  Or can anyone confirm that blocking by keywords are or are not working for them under the latest firmware?  This is causing problems for our west michigan web design company. Help appreciated.
    Solved!
    Go to Solution.

    How was the FW updated? Automatic or manual? 
    To safely update FW, I recommend doing the following: Download the FW file from the support site first.
    1. Save router config to file first using IE or FF with all security add-ons disabled.
    2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
    3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
    4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
    Users have seen issues with upgrading to the most current version, you may need to revert back to v4

  • WiFi no longer working with new Time Capsule-can you help please?

    Hi all,
    Just received my new Time Capsule (TC). It was a little problematic setting up, but probably due to my now choosing to increase my security from WEP to WPA as the TC set-up assistant suggests. Since then, I have had numerous problems getting my other computers and now my iPhone to connect with WiFi.
    The problem is that despite entering all the new settings and WPA passwords for my connection with the TC, the iPhone will either momentarily recognize and go to wifi or simply stay on Edge.
    On the former, with wifi active, as soon as I go to iTunes, Safari or check email, it reverts to Edge. On the latter, despite resetting, entering password, or tapping Settings and selecting my wifi connection, it will NOT connect and stays on Edge.
    (Now, I'm on Edge! I'm bummed that with new hardware I have new problems that didn't exist before!)
    Can someone who had this same problem tell me how they resolved it.
    Here's the one clue I have, but would rather not resort to: When I first set up the TC, I had it on WEP with a WDS Network, and everything was working great and FAST! Now that I have increased the security—I will be backing up 3 computers to the TC—my iPhone and other computers seem to have intermittent or no wifi connection as a result.)

    Irving Gonzales,
    If your computers are 802.11N capable, you might want to try an advanced setup that might help your Time Machine speeds some. I have not personally tested it, so it is just a personal theory at this point.
    First, in a mixed environment the 802.11N clients all get slowed down.
    First, configure the TC for 802.11N only.
    Second, connect the Airport Express via ethernet to the Time Capsule
    Third, configure the Airport Express for bridged mode (doesn't give out IP addresses), and for its own wireless network with a different name than the Time Capsule.
    Have any 802.11b/g clients like the iPhone join the Airport Express' network.
    Thank you,
    Nathan C.

  • Autoplay NO LONGER WORKS with the latest update

    Just got an automatic iLife update yesterday, over the web.
    Since then, the autoplay for quicktime movies in iWeb no longer works. Anyone else having this problem? Anyone have a solution?
    Thanks.

    Did you do a restart after the update?
    Also try the procedure under "Fix iWeb" here...
    http://www.iwebformusicians.com/WebMusic/iWebTips.html
    You can also use this method....
    http://roddymckay.com/VisualMedia/QuickTimeiFrame.html
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    <Edited by Host>

  • Norton no longer works with new version of Firefox. I want to go back

    Just downloaded the new Firefox version. Now Norton, which provides info re safety of websites no longer works. I'd just as soon go back to the older version but don't know how.

    Actually Norton has been doing a great job of support new Firefox releases on day of or shortly after a new Firefox release ever since Firefox 5.0.
    Norton does support 9.'''0'''.1
    For example: http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-9-Support-for-Norton-Toolbar/td-p/615563

  • Cam no longer works with new version

    i have installed the latest version of flashplayer but now my webcam no longer works on video chat sites like chatoulette what should i do please?

    This is a known issue with Flash Player 11.2.  Please install our 11.3 beta 3 release and let us know if it helps.

  • E72 - Photo editing no longer working with new FW ...

    The option in image gallery to edit photos no longer works. It only brings up a partial blank window with no editing options as in the previous fw versions (where editing worked fine). Any ideas?
    Solved!
    Go to Solution.

    Problem solved. I formatted my memory card (which I now use only for music and photos) and that solved the problem. Editing back and working as it should. Phew!

  • SYNC no longer works with 10.6.1 - Assistance Please!

    My Curve has been working great with PocketMac Sync for the last year. A couple days ago I updated my MAC to 10.6.1 and now it no longer shows my Blackberry on the desktop when I plug it into the USB cable. When I open PocketSync it says "Avaliable" under the Blackberry option, and if I try and run a SYNC it fails. It no longer shows the PIN of my phone ( as if it is not connectged at all)
    Basically it does not think I have a phone attached. I need to get my new contacts added to my phone, and I don'd find any solutions out there so far. Any help would be GREATLY appreciated.
    Syncing with Entourage, not iCal
    AVF925
    AVF925
    Blackberry Curve 8330
    iMAC 20" - OSX 10.6.1

    This is not a solution at all, but a test.
    Since you are under snow and you don't want to go back I suppose...
    Download the leaked beta version of Blackberry Desktop Manager for Mac (see crackberry.com).
    Just test the connection (do nothing else).
    If the connection works (your pin is retrieved by the soft) you have a question on your desk : going back to Leopard or waiting for a maybe upgrade of the DM that today sync only with iCal and not with Entourage.
    Y. 

  • M3u's no longer work with new itunes

    So I built a new rig with windows 7, I previously had xp.  And what I had always done for YEARS was to create my playlists in winamp and save them as m3u's.  Then all I had to do was open up itunes, go to import playlist and select it and boom all my songs would pop right up and I could add and sync the playlists on my ipod.
    However that does not work anymore for me.  I create the playlist the same way as always, and then open up itunes and go to add it and the playlists add to the column on the left, but they are completely blank, no songs come up on the main right side to listen to or play and you can't add them to any ipods.  These same playlists all work fine in winamp.  So what's the deal here?

    bump, nobody?

  • HP printer no longer works with new OS

    Greetings,
    I have an older iMac with a 2.4 GHz Intel Core 2 Duo and 4GB 667 MhZ DDR2 SDRAM.
    I recently upgraded my OS from OS 10.5.8 to OS 10.6.8, and can no longer print on my HP Deskjet 5650.  Any suggestions would be appreciated!  Thanks,
    Larry

    hp only state support for 10.5.X so if you install the older driver and it does not work then it's because hp no longer support newer versions of OS X
    HP Deskjet 5650 Color Inkjet Printer Drivere - Hewlett Packard
    in which case you have 2 options downgrade to 10.5.X or get a new printer

  • Answering calls from car no longer works with iOS 8 update

    After updating the firmware to iOS8 my iPhone no longer answers calls from my car bluetooth audio. I get the call alert but the car answer button is disabled.. I am using standard bluetooth communication and not the A2DP technology.
    Is anyone facing a similar issue?
    I am using iPhone 5s

    I know that I had to delete the entry in the car's Bluetooth setup (for Steve's iPhone - replaced and iPhone 5 with 6) and then go through the setup again to get it to work. Perhaps that would solve your issue?

  • Synching is not working with new lion update.

    I have checked my preferences and it's all set to sync but only certain calendars are synching but they're all checked.  Any ideas?  I typically sync to mobile me which pulls it down to the various computers...  And my mail isn't working on an outgoing basis but I'm receiving emails.
    Anyone else having these issues?

    Hello
    I am having the same trouble with synching. In fact I was hoping to find a solution on this forum. In order to check my multiple email accounts via Apple Mail, I have to Mail - Synchronize - Email Accounts manually in order to ensure I am receiving mail from all of the accounts.
    Hopefully Apple is working on it now and we'll see an improvement in the next update. In the meantime I hope that someone else has a better idea.
    Cheers

Maybe you are looking for