Sync not copying all Phonebook entries

Hi, my current configuration is:
Windows Vista
PC Suite 6.84.10.3
Cable Connection
Nokia 9500
I tried to sync my contacts info with Vista contacts, but it only copied 59 contacts into Vista. My phone has over 300 contacts.
I restarted the communicator and tried to sync again, but no new contacts were updated to the Vista contacts.

YOu have to force slow sync (slow sync means same as "first time ever sync between 2 devices") because then everything will be read from both devices and synchronised.
Also always use sync on both directions.
Connect phone to PC, open PC Sync, select Settings - Create new settings - run through the wizard of selections to force slow sync.

Similar Messages

  • PC Suite 4 not copying all Phonebook and Calendar ...

    What version of Windows is being used? XP Home
    What Service Pack is installed? sp2
    What version of PC Suite is installed? v4.81
    What is the connection method, cable, bluetooth or IR? Cable
    Phone: 6210e
    I'm trying to use the Content Copier to back-up my phone data to a PC'. I've done this a few times in the past without problems, but now when I try it only 50 phonebook entries (though there are over 200 in my phone memory) are being copied, and no calendar entries at all. I've tried it with two different 6210 phones, and I've tried both the 'Copy data from a phone to a PC' and the 'Copy data from one phone to another' options, but each time the results are the same - 50 phonebook and 0 calendar entries. The same thing happens
    1) This is the log from my current attempts:
    Selected action: Copy data from a phone to a PC
    Source phone: Nokia 6210
    Connection Type: Cable (DLR-3P)
    Transferring data from the phone...
    Phone book
    - Names and numbers (phone)
    - Caller groups
    - Additional numbers
    - Additional fields
    Ready.
    Phone book successfully saved to C:\Documents and Settings\Bert\My Documents\Phone BackUps - Oct06\PhoneBook.csv
    Selected action completed.
    2) This is the log from my previous attempt:
    Selected action: Copy data from a phone to a PC
    Source phone: Nokia 6210
    Connection Type: Cable (DLR-3P)
    Transferring data from the phone...
    Phone book
    - Names and numbers (phone)
    - Caller groups
    - Additional numbers
    - Additional fields
    - Names and numbers (SIM card)
    Calendar
    - Memos
    - Meetings
    Ready.
    Phone book successfully saved to C:\Documents and Settings\Bert\My Documents\Phone BackUps - Jun06\PhoneBook.csv
    Calendar successfully saved to C:\Documents and Settings\Bert\My Documents\Phone BackUps - Jun06\Calendar.csv
    Selected action completed.
    Any ideas ?

    Thanks for that. It would seem that this is what it would be.I saved them all to sim bar a few when I got this phone due to this very problem... losing contacts! and having to enter them manually on a new phone. I would've thought being a phone that your contacts are the most important. Strange Nokia idea.

  • Itunes not copying all photos from an event on my iMac to iPad

    why is iTunes not copying all photos from an event on my iMac to iPad

    Not at this time. There is no connection between iPhoto on the Mac and on the iPad
    Maybe in a future release
    Suggest to Apple. IPhoto menu =>> provide iPhoto feedback
    LN

  • Why does iphoto not copy all photos when transfering

    Hi peeps.
    why does iPhoto not copy all photos from an event when im copy/pasting to an external folder on my mac(for later transfer). All softwares are up to date and ive only just realised it happens, but when i copy all pics in an event then paste in a folder, the pic count is substantially different. for example i select all pictures in an event called 'new1', the count of files is 188. i then copy/ paste to a folder,  select all files and check 'info' and it says 141 files??? 
    all i can see painstakingly going through to compare which images are in each place is that the ones that arent in my new folder , seem to be the ones ive edited in iPhoto??  conincidence? or am I missing something fundamental here?  Ive only just realised this is occuring. The trouble is, after moving images to folders/hard drives I  subsequently delete them from iphoto to keep my macbook airs HDD with some space.  So basically all of the versions of pictures I want, i.e, the new edited and adjusted versions are no longer! NOT HANDY!
      help please.

    We've seen a few reports of this in the past while and no one is sure of the cause.
    Use the File -> Export command. See this User Tip
    https://discussions.apple.com/docs/DOC-4921
    for details of the options the Export Dialogue offers.
    If you're interested in your Photos then this workflow
    The trouble is, after moving images to folders/hard drives I  subsequently delete them from iphoto to keep my macbook airs HDD with some space.
    means you are losing quality, metadata and the version of control. If you don't want these why use iPhoto at all?
    You could just move the whole Library to an external:
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • Using the copy music command does not copy all the music

    When I used the copy folder command in Itunes, it only copied either the even or odd numbered tracks from each album....
    It does not copy all the tracks from each album!
    any help would be appreciated.
    thanks
    Norm

    Hiya!
    It depends on what kind of digital copy you have.  This article goes ino details regarding the two types, and depending on the type you have, you may or may not need the DVD to redeem the code.
    Transferring video from DVDs with iTunes digital content
    http://support.apple.com/kb/HT1539
    I hope this helps!  Best wishes and good luck!

  • Sync notes on all apple devices

    How do I sync notes on all apple devices?

    computer - System preferences/iCloud - make sure you are signed in and check Notes.
    devices - Settings/iCloud turn Notes syncing on.

  • Syncing audiobook did not copy all sections

    Today I purchased an audiobook that downloaded in 7 sections.  When I sync'ed my iPod, I chose this new book and a book that I purchased about a year ago, which had 3 sections.  The sync took a LONG time.  I ended up leaving it alone for several hours.  When I came back and checked the iPod, I had section 1 & 3 of the older purchase and all but section 4 of the new purchase.
    I tried to sync again with just the older book to see if it would fill in the missing section.  It did not.  I removed all selected music and books, then sync'ed again to remove everything from the iPod.  I again sync'ed with just the new purchase.  After more than an hour, I again had all but section 4 of the new purchase on the iPod.  This time I noticed an icon with pop-up text saying "iTunes could not copy section 4 of 7 because the file could not be read or written."  UGH!  that doesn't sound good.
    Any ideas what could be happening?? Thank you in advance.
    Computer OS - Windows 7
    iPod Touch Version 6.1.6
    iTunes version 12.0.1.26

    Sorry this solution is late but I just got off of the phone with Apple support and this worked. 
    Open iTunes
    Connect your iPhone and keep it connected during this entire process.
    In the iTunes menu at the very top (File, Edit, View) choose STORE> Sign in and sign into your iTunes account.
    Once this is complete look at the upper right corner of iTunes and you will see an iPhone and Store button, cick STORE.  Now you will be in the iTunes store where you see the advertisements of the various albums, songs etc.  Look on your upper left of the window for your itunes account name and in the black band next to your iTunes account name, you will see a House icon, then Music, Movies, TV Shows etc.
    Make sure the HOUSE icon is selected.
    Stay on this screen in iTunes and on the lower RIGHT, you will see an area that says- QUICK LINKS.  In that area click - Purchased
    After you do this you will be transported to another area of iTunes.  Here there will be a menu across the top- Music, Movies, TV Shows, Apps, Books are the choices. 
    Choose APPS and you will see the apps that you have purchased.  You will also see the apps that didn't download to your phone. 
    Find the apps that didn't download and click the cloud next to their name.  Doing this will download the chosen apps to the computer you are on. 
    Once you have downloaded the apps in question, in the upper right corner click LIBRARY.
    Now you should see the button that says iPhone because your phone is still plugged in.  Click the iPhone button and then click SYNC on the lower right to sync your iPhone.  
    The apps you downloaded will now be on your phone.
    Sorry for the long instructions but this is what works.

  • SDTXT1AID does not copy all entries as seen in OVTX

    Hi! We are upgrading from R3 to ECC6. I know we have to run program SDTXT1AID to copy the texts from TTXER to TTXERN. However, there is something which I don't quite understand after running the program.
    If I check table TTXERN against the old table TTXER, the number of entries are the same.
    However, if I check TTXS in R3, there are more entries than that in TTXER and TTXERN (in the new system). So, when I run tcode VOTXN, I found the number of entries is the same as TTXERN but are missing entries that are found only in TTXS.
    Does the mean I have to manually maintain those entries?
    Regards
    SF

    Hi, I have gone through the 2 notes. Have to said that I did not run RVTEXTE with 'G' as I thought that has to be run pre-upgrade. I guess I mixed up with note 900607 where I have to run the same program with 'Y'. Unfortunately, this problem was discovered only after upgrade so I suppose I can only run RVTEXTE with 'G' after upgrade?
    So, I proceeded to running this program followed by SDTXT1AID but it still does not add the other entries into new table.
    Regards
    SF

  • IPod not copying all songs back to pc

    I've been trying to copy all my songs back from my ipod onto a new pc that I just got because my old one was stolen. I've tried using Yamipod and Copypod and both work to a certain extent. I have about 5200 songs and each program only copies about 3000 songs over, then gives me an error and says it can't copy the rest. At first I thought it was the program, but after trying out two different ones, I don't know what it is and I don't know how to fix this. Anybody have any ideas at all? I'm desperate! Thank you!

    It might of loaded the whole iTunes database but not all songs, so all the other times you sync, iTunes thinks iPod already has the songs maybe.
    Try running the latest updater on it and restoring it. Restore wipes the iPod clean and then u use iTUnes to load it back up. the latest iPod updater is version 03-23-2006 and can be downloaded here http://www.apple.com/ipod/download/

  • Not copying all songs to ipod

    I just recently got a new video ipod, and when I tried to upload all the songs from itunes onto it, most of them did not copy. What's the problem and how can I fix it?
    Thanks.
      Windows XP  

    It might of loaded the whole iTunes database but not all songs, so all the other times you sync, iTunes thinks iPod already has the songs maybe.
    Try running the latest updater on it and restoring it. Restore wipes the iPod clean and then u use iTUnes to load it back up. the latest iPod updater is version 03-23-2006 and can be downloaded here http://www.apple.com/ipod/download/

  • Aperture plugin not copying all previews

    Using "v1.1" of the plugin (or rather, it's actually 1.0.9 something)
    Looks like the plugin is does not copy over half of previews from the Aperture library.  I ran three tests on approximately 1100 photos each.
    Method:
    All photos were selected and previews deleted in Aperture. 82 photos were selected in Aperture, and small previews were generated (defined by preferences). Verified that, indeed, 82 previews existed in the Aperture library by examining the PREVIEWS directory within the library package.
    Migrated using the new plugin. Selected all options.  Searched to find all JPEGs with _Aperture_preview.jpg appended in the Lightroom target directory. Only 31 images found.  Some of the previews that did copy were side by side others that did not copy in the same project, from the same camera.  I can’t find a reason why they did not copy.
    Here’s and entry from the log:
    Failed to copy /Volumes/Photos/Aperture Library/Ashi/IMG_8250.JPG to destination directory
    Some preview files that did not copy show in the log, but most do not.
    Anyone else seeing this?  You can test if your previews copy, too, by using the method above.

    Hi,
      Had you imported a new set of images around the time the problem started?  There have been situations where a corrupted image being imported has given rise to something like what you describe.
    If the answer is "no", then suggest you do a repair, or a rebuild if that doesn't work:
    To repair or rebuild your Aperture library
    1  Close Aperture, if it’s open.
    2  Locate the Aperture library you want to fix, then hold down the Command and Option keys while double-clicking the Aperture library. The Aperture Library First Aid dialog appears.
    3  In the Aperture Library First Aid dialog, do one of the following:
    • To repair the permissions of the files within your Aperture library: Select Repairing Permissions.
    This option should be used when Aperture can’t access some of the image files within the database or Aperture is unable to open the library itself. The Repairing Permissions option reviews each file in your Aperture library and sets the read and write access of each file where appropriate, allowing Aperture to access the files again.

  • Eyedropper tool does not copy all attributes

    Illustrator CS2 with Windows XP (SP2)
    Every document I've checked says that AI CS2's eyedropper tool will copy all appearance attributes. Yet it fails to copy the Align Stroke attribute.
    It's not given as an option on preferences so I haven't inadvertently turned it off. All the others work ok. I gather from other documents in this forum that Align Stroke is new to CS2? Could Adobe have forgotten to add a line of code?
    Grimble.

    > If you wouldn't mind humoring me a little longer, could you confirm that the attributes listed under Appearance, Focal Stroke are: Color, Transparency, Overprint, Weight, Cap, Join, Miter Limit, and Dash Pattern; i.e. that Align Stroke does not appear in the list?
    Yes, that is correct. Align Stroke is an effect, so like all other effects it does not appear specifically on the list. The transfer of effects with the Eyedropper is controlled by having the main Appearance checkbox checked. So checking all the items listed
    underneath Appearance while leaving the Appearance checkbox itself unchecked means you want to transfer all aspects of Appearance
    except Effects. (Brushes are another Effect that is applied through a palette instead of through the Effects menu.)
    Since the behavior of Effects are dependent upon each other and upon the fills and strokes (for example, many of them are applied to a specific fill or stroke), they can only be transferred if the entire Appearance is transferred. That's why there is no Effects line. The Appearance checkbox itself means transfer the
    entire appearance.
    Is your Eyedropper tool transferring other kinds of effects such as Drop Shadow and Roughen?
    > Secondly, when I choose a tool, such as pen or rectangle, with no object selected (in order to draw a new object), I find that the Align Stroke option is greyed out - and it is the only option greyed out in Stroke. It only becomes functional after the object is drawn (and still selected) or when another object is selected. This also seems unusual behaviour and I'm wondering if it is normal?
    I think it's odd too, and would consider it a bug. The Align Stroke item seems to have very conservative enabling rules. There are many other conditions under which it is disabled even though it is legal for the selection to carry aligned strokes. For example, it is disabled if you have a text object or a compound shape selected. Yet you can transfer outside or inside aligned strokes to compound shapes or text objects using the Eyedropper tool, and you can apply them to those objects by applying an appropriate Graphic Style, and you can apply them to those objects by dragging the Appearance indicator in the Layers palette.
    My guess (I did not work on this feature so I don't know for sure) is that when it was first implemented it only worked on path objects, so the button was disabled for other kinds of selections, and then the implementation was beefed up to handle other kinds of objects, but the button enabling logic was never revised to reflect the new capabilities.

  • Sync does not copy all contact data from Outlook 2003 to iPhone

    I tried syncing my outlook 2003 to iphone. However the data information in outlook such as Work2 / Home2 / Fax 2 , E-mail 2 / etc; & other secondary numbers don't get copied on the iphone. Is there a patch or some other solution to fix this problem.
    Also if we enter multiple home or office numbers in a contact in iphone how will outlook react to it.
    I am using itunes 7.6.1.

    Well lots of writing on the web but i beleive i nailed the problem. Please spread the word further, the solution is (or actually the bug in Sync of iTunes :))
    When iTunes developers select which contacts folder to synchronize they do not choose by what Outlook considers to be the main folder, what they do is they sort the list of folders alphabetically and then read the contacs from whichever folder comes first in that sorted list. So make sure that any other contact folder is named with a name that will be sorted out and go in the list after your main contact folder.
    Mr. Jobs, i am actually happy to see apple doing this trivial childish mistakes, it means you are still mortal, i was starting to get frightened that apple is helped by mighty forces to us mortals still unknown

  • Help, please.. ITunes will not copy all my music to IPod

    I have a 2nd generation iPod Nano and I'm having some trouble. I somehow accidentally (apparently I'm a moron) restored my iPod so that everything was erased. I have my library backed up on disc, but all my songs are still showing in the ITunes Library. I have 575 songs. When I sync my iPod to ITunes, it gives me an error message saying "Some songs could not be copied because it is not authorized for this computer (100 problems)", something along those lines. After that, it will only copy 340 songs from my ITunes library to my iPod.
    Can anyone tell me why this is happening and how I can get all my music transferred back to my iPod?

    Have you authorized your computer to the iTunes Store account under which those tracks were purchased? You can either play one of the tracks (or additional tracks if any were purchased through a different iTunes Store account) or use the Authorize command under the Store menu in iTunes.

  • Pricing type Z does not copy all conditions

    Hi All,
    In one copy control we have pricing type Z defined. But for this order type, when we create invoice, one condition type (ZHRT) is not getting copied to invoice. When copy control is modified to use G, the same condition is copied.
    In my USEREXIT_PRICING_COPY I have the below logic.
    STEU-KNPRS = 'Z'.
    STEU-KOAID = 'CD.........'.
    STEU-KNTYP = 'LRIEGSX....'.
    STEU-MAUEB = ' '.
    APPEND STEU.
    Please advice me the meaning of these entries. What changes I need to make to get that missing condition copied to Invoice.
    Thanks in advance.
    Mike

    See OSS note 24832.

Maybe you are looking for