Sync problem after 1.0.2 update

My iPhone freezes-up when I try and sync since the 1.0.2 update.
The progress bar just shows "syncing iPhone etc" , but not sycning, contacts, music, photos, etc"
The slider on my iPhone goes dim and I have to retart the iPhone using the home and on/off button.
I have gone thru this procedure several times and now I just have it charging with the AC adapter.
Also restarted the G5, still have the issue.
Anyone else ? Possible solution ?
Thanks,
Art

I continue to have no luck syncing since going to 1.0.2
After clicking restore system, the iPhone "slide to unlock" stops and it freezes up.
I must then restart the iPhone using the home & on/off button.
As another post recommended, I deleted the 1.0.2 files from the "iphone software upades" folder,
restarted and have gone thru the above process several times, always ending in an endless
spinning beachball and then error 1602.
Any new answers before I go to the Genius Bar ??
Thanks, Art

Similar Messages

Office 365 sync problems after most recent security update

Since the security update, mail and calendar are not syncing with an email address at outlook.office365.com. After the update, Mail and Calendar wouldn't open with several tries. Sent reports to Apple. Finally, Mac took longest time to boot with the spinning disc. Then Mail and Calendar would open but they don't sync with my work emails. It doesn't say it didn't sync but it is clear it did not given that I can see the emails on my iPad and through webmail and on my phone. Any ideas? How can I make sure Mail and Calendar didn't get corrupted? How can I fix? How can I make them work so I can work?

I thought that this happened to myself as well, but I just let the computer run at the gray screen, and the apple and loading indicator came up a minute later. It stayed this way for a while, then it restarted itself and all is well.

3 Problems after jb 4.3 update

stockmail exchange active sync shows only headers - no mail content
bluetoth connect to my HTC One S didn´t work
screen flickers when using virt. keyboard
since everything worked well with 4.2.2 and there was no help from sony i decided to do a rollback
!* same problems with 10.41.B.0.109 (last working version for me is 10.3.1.C.0.136 aka 4.2.2)

hi.
I contacted Sony about the Bluetooth / Wireless problem after the 4.3 update, eventually all I got back was that they're aware of the problems (Bluetooth) and are working on it for the next update. How long this will take is anyones guess.
I find it incredible that they rolled out the 4.3 update because it has so many bugs, at least give us an easy way to roll-back to 4.2.2 ...... that actually worked!

Searching problem after 10.5.6 Update

Hello everyone, we are having a problem with searching shares mounted on clients from a server.
Prior to 10.5.6 we could search an entire share as well as folders in the share. After 10.5.6 we can't search the share and we can only search folders in the share.
The server is currently running 10.4.11.
I guess what I'm wondering is... are there people with server 10.5 that are also seeing this problem or would upgrading the server fix this search issue?
Thanks
Mike

Searching problem after 10.5.6 Update
Posted on: 8-jan-2009 18:32, by user: mike allen2 -- Relevance: 100% -- Show all results within this thread
Hello everyone, we are having a problem with searching shares mounted on clients from a server.
Prior to 10.5.6 we could search an entire share as well as folders in the share. After 10.5.6 we can't search the share and we can only search folders in the share.
10.5 that are also seeing this problem or would upgrading the server fix this search issue
Re: 10.5.6 disables spotlight from searching shared volumes
Posted on: 18-dec-2008 15:49, by user: jshock -- Relevance: 89% -- Show all results within this thread
on the other machines that didn't update to 10.5.6. They are able to search all shares. My 10.5.6 machine can only search localhost and Jukebox ...I ran mdutil on the 10.5.6 machine, here are the results:
$ mdutil -s /Volumes/*
Indexing disabled.
/Volumes/Jukebox:
Server search enabled.
Re: 10.5.6 Update-DOES NOT SEARCH ANYMORE
Posted on: 9-jan-2009 20:43, by user: Difhockey_68 -- Relevance: 89% -- Show all results within this thread
Same problem here, upgraded to 10.5.6 and cannot search our apple server running tiger. Windows shares on 2003 server works fine. Will an upgrade of our Apple server to Leopard solve this issue? Is there an easy way to "uninstall" 10.5.6 without reinstalling the computer
Since upgrading to 10.5.6 I can't search my network servers
Posted on: 14-jan-2009 22:24, by user: gridout1959 -- Relevance: 84% -- Show all results within this thread
Hi all...
I recently installed the 10.5.6 OS upgrade and I've encountered a problem. I can no longer search my network attached servers - there is no search activity of any kind when I type in search terms. My local search works fine...I just can't search anything on my network ... windows servers. Is there a compatibilty issue between OS X 10.5.6 and Extreme Z-IP? Any helpful tips
Updated to 10.5.6, no longer able to search through networked shares
Posted on: 30-dec-2008 16:46, by user: Sigops -- Relevance: 84% -- Show all results within this thread
One of our users was able to search through our network shares(extreemeZ-ip) just fine yesterday morning, mid morning he updated to 10.5.6 and is no longer able to use finder to perform searches on those shares
Mac OS 10.5.6 clients can no longer search Mac OS 10.4.11 share points
Posted on: 8-jan-2009 18:52, by user: rayvid -- Relevance: 71% -- Show all results within this thread
After upgrading our workstations from Mac OS 10.5.5 to 10.5.6, we no longer receive Finder search results from our file server that runs Mac OS X Server v.10.4.11.
Are there any other solutions available other than rolling the workstations back to 10.5.5 or upgrading the file server to 10.5.6

Syncing and music problem after iOS 4.3 update

Hi there
I updated to iOS 4.3 and found that my phone would no longer sync to my PC. After doing some research and trying lots of things (e.g. removing and reinstalling iTunes, de and reauthorising computer, forcing iphone to restart) I was having no luck so I did a restore. This didn't work either and just hung for hours, so had no choice but to stop it and then my partner managed to get my iPhone back to life on his Mac.
My iTunes then recognised it as new and I was able to start rebuilding my library. However, when I sync music to my iPhone now, it won't play - it just flashes up for a second and then crashes out. Only happens on my music - podcasts play fine. Haven't tried video yet. It also flashes up the album artwork but it is all distorted (cut in half with the bottom half at the top and vice versa...weird).
I tried downloading a song on my iPhone which played fine, until I then synced it with the computer and it got the same error as the others.
Any ideas?! I'm planning to uninstall iTunes again tonight (being sure to completely remove any trace) and erase all data and settings from the iPhone so I can start completely afresh. It's the only solution I can think of.
Thanks
Alan

I have discovered this is a problem with Windows 7 Updates (probably Service Pack 1) for me - after I installed the updates all my music corrupted again and iTunes started freezing and not backing up. Lo and behold, after formatting my computer again and not installing ANY Windows Updates, the problem was fixed and I've been able to add all my music back.
Now I'm not sure what to do - I would like to get Windows updated, but I know it's going to break my phone. Am tempted to try a different iPod manager software to see if that helps.
Where do I get the iTunes patch? (sorry if it's really obvious)

New Outlook sync problem after update!!!

I had the 'original' Outlook sync problem, which went away after the iTunes update to 7.3.1, but now, after the iPhone update last night, I have an entirely NEW Outlook sync problem!!
When I sync the iPhone, right when it gets to the 'syncing contacts' part (that you see in the top box/window in iTunes) I get an error message that I haven't seen before. It says "AppleMobileDeviceHelper has encountered a problem and needs to close..." and it gives me the option to send an error report. I dismiss the error box, and the sync process hangs, and iTunes becomes unresponsive.
If I open Outlook, the two Apple sync oblects are still enabled, and get no error message. If I re-open iTunes and try to sync again, it only syncs iTunes content, and never even tries to sync my contacts or calendar.
Anyone having anything similar since last night? The only thing different is the iPhone firmware update.

I just cancelled the sync by using the slider. I didn't realize I could do that. The phone seems fine. I may try it again and see what happens.

Sync problem after update

I installed the iTunes update and the 3.1 iPhone update. I had no problems with those at all. I then decided to sync my phone. My syncs usually only take a few minutes. My phone has been on "syncing iPhone" for at least an hour. It hasn't moved to backing up phone or anything.
I'm not sure whether to just let it continue or if there is something else I should do. The sync process is using nearly 100 percent of my cpu on the computer and I could barely get anything else open to get to this forum and type this message.
Any suggestions are welcome. Is anyone else having unusual syncing experience since the update? What will happen if it never progresses and I just need to unplug it? What will I need to do with the iPhone?
In my year of having the iPhone I've never had a sync problem before. Thanks for any help.

I just cancelled the sync by using the slider. I didn't realize I could do that. The phone seems fine. I may try it again and see what happens.

Sync problem after update to Belle

Hi Nokia
I have updated my E7-00 to Belle yesterday and
now when I'm trying to restore my contacts,
calendar and notes from Ovi sync server I'm
getting error 'Service activation failed. Try again
later.' I've reed in this forum that the exact problem was
in August-September 2011, which was solved
only in early November by manipulating on Ovi
Servers. How can I restore my contacts now? Will be the
issue solved and how urgently?
Solved!
Go to Solution.

Some 2 months ago, I installed leaked Belle v.111.030.0607 on my N8 and everything worked fine including Ovi Sync.
2 days ago I updated to the official Belle version and the Ovi Sync failed to work with message: "Service activation failed. Try again later." The problem still persists now.
Can you believe it, leaked Belle version works better than the official version?
Quo vadis Nokia?

Sync problems after iTunes Match update

iTunes Match has created an ongoing sync problem for me. If Match updates automatically based on songs I've purchased from the iTunes store, then I usually have no issues with the sync function. However, if I load a CD that is not in the Match library, or if I just manually do an update to Match, it causes my 160gb iPod to take 15-20 minutes to sync. Why is this happening?

I cannot sync my music but I get the message that it is connected but it is not recognised.
As advised on the error message I have reset the Nano and re-installed itunes with the same results.
Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Sync problems with new 4.3 update

I have just updated my iPhone 3gs and now I have sync problems with itunes. Eveytime I try and sync my playlist or any music to the iPhone it end up with a spinning beach ball after a couple of tracks.
Has anyone else had this problem?
I have reset my iPhone a few times now since the update but it doesn't resolve the matter.
Please help.
Kind Regards
Alan

Sorted this myself eventually. just factory restored my iPhone via iTunes. working now!

Cured a sync problem after upgrade 10.5.1.

Since the update of OS X.5.1 and iTunes 7.6, I could no more sync :
iSync crashed, dot mac sync event did not register again my macbook (I deleted all the machines registered from another mac), and I could not sync my iTouch via iTunes...
This is solved now and described at http://discussions.apple.com/thread.jspa?threadID=1380833&tstart=0
Hope this help.

Will try installing OS X 10.5.1 again from the downkoad that you recommended. Won't be able to do this untill after the New Year but I'll let you know if this helped. I had another problem after he 10.5.1 upgrade and that was that the Security update 2007-009 also refused to install. Could this be related too the problems with Disk utility and the permissions problems.

I have Audio problems after 6.1.2 update. What do I do?

Is anybody else having audio problems after updating to 6.1.2? How do I Fix it?

No problems here.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Another major problem after 10.4.8 update

Hi everyone,
I've never had any major problem with any Mac OS update yet until I had the crazy idea to install the 10.4.8 update last week. I wish I would have never done this. This is also the first time I wish I had Windows since I can't remember such a big screw up with any Windows update I've seen.
But back to the problem, after the installation on my old 12" Powerbook (1.33GHz with an additional 1GB of RAM) the system got really slow. The harddisk was accessed all the time, so after reading some forums people said that Spotlight would run a re-index of the database which made sense to me. So I just let it run over night and the next day the permanent HDD access was gone, but whenever I tried to access a folder it took ages (HDD access again...). So I decided to reboot which took about 20 minutes until the desktop fully showed up and was useable. Again, I had HDD access all the time. After two hours or so it stopped again, but as soon as I clicked on something, for example a folder, it started again. At that point the Powerbook was simply not useable anymore because I couldn't even start a program.
So I start browsing through several forums and many people suggested to re-install the 10.4.8 combo update again. That's what I tried, after a while I could only hear the HDD access running and running. The installer said 29 minutes left and progress bar didn't move any further. I had it running for over a hour like that. I couldn't abort it, I could start no other software, nothing. It still showed 29 minutes and the HDD was accessed all the time.
So I restarted the Powerbook since this obviously wasn't going anywhere. Apple logo came up, the little gear spinning thing as well and of course I could hear the HDD being accessed. After two hours of doing this I aborted and decided to boot into safe mode to install the combo update. Again, same situation. HDD running like crazy and Apple logo, but no login screen coming up.
So I decided to boot from the Install disk and have the disc utility check the HDD... but of course after selecting the language and clicking continue at the screen when the HDD first shows up it starts to access the HDD... I can't select the HDD, I can't even get to the DU, nothing. It's been running like that for hours now. It seems like whenever the HDD is involved in something the accessing starts and just keeps running without any result. The HDD is getting very hot already.
I've never run into such a problem before, so I'm kinda clueless what to do next. I don't mind to reinstall, but I have some files on that HDD that I need (some notes in text files, some emails and so on).
So at this point I can't boot into OS X to access the HDD and I can't use the installer disk to access DU or even reinstall if I wanted to. I don't think the HDD is broken, this only happened after the 10.4.8 update. It just seems that every HDD access takes hours and hours longer than it should.
What options do I have to get my data from the disk? I'll try to install OS X to a new external drive tomorrow (need one with firewire first). If that doesn't help I thought about pulling out the HDD from the Powerbook and hook it up to my MacMini or an iMac.
If anyone has any other suggestion or solved a similar problem before, please let me know.
Best,
Stephan

See my FAQ:
http://www.macmaps.com/WIFI1048.html

Problems after recent slew of updates

After the recent mass of updates through pacman...I have a few problems. My UPS monitor applet doesn't show up in the taskbar anymore...however it's still being detected, and I can view the status of it w/ "apcaccess status". Another problem I'm having is now ALSA's PCM channel is all messed up again. I've tried the usual fix...blacklisting all the sound modules except for the sound card driver and snd-pcm-oss...but that doesn't work either. Anybody else seeing these problems as well??

Update: Found a fix for the mouse sensitivity issue. The new xorg server includes new options to put into your xorg.conf file. More information can be found here: http://www.x.org/wiki/Development/Docum … 34190b732d .
As far as the option I put into my xorg.conf file to fix it was this:
Option "ConstantDeceleration" "3"
Hope this helps people in the future.

Problems after 10.6.8 Update?

Ever since I updated my Mac to 10.6.8, I have been having problems with my MBP freezing. It will freeze, then come back and I have to re-launch finder. Also, MS Outlook 2011 freezes when I delete mail, or simply try to quit it(Force Quit). Safari freezes when it opens up too, and it does what a PC does upon login, "warm up" so i can no longer start doing what ever immediately. Is anyone else having this problem?

My 2011 MBP 13" i7 has had no issues whatsoever after
10.6.8 update. However, the process I went through was
as follows:
    1. Booted my MBP from a clone on a Firewire drive.
         (hard drives are so cheap these days there is no
          excuse not to have a clone or TM backup)
    2. Ran a repair disk on the internal drive using
         Disk Warrior. Disk Utility repair disk will work
         as well.   I use Disk Warrior because I can also
         run a check for corrupt files.
    3. Repaired permissions on the internal drive.
    4. Rebooted to internal drive.
    5. Updated my clone, so that I have a clean system
         to revert to.
    6. Downloaded the Combo update and ran it.
    7. After reboot, repaired permissions.
Now, for those of you who are having slow systems after
the update, check process monitor to see what is sucking
up the CPU time. Then go from there.
For those of you with system freezing issues, boot in safe
mode. If the problems go away, then some driver or process
is being loaded at normal boot that is causing the problem.
Also, if you are using any "add ons" to applications such as
Safari or Mail, disable them, if you can, and see if the issue
persists.
With all this said, yes my MBP is running just fine with 10.6.8,
but my 2010 Mini has annoying audio issues with the update.
There may be more on it, but the audio issues are enough
for me to go back to 10.6.7, since this is part of my
entertainment system.

Sync problem after 1.0.2 update

Similar Messages

Maybe you are looking for