Sync Problems 1 - I went from PC to Mac and Iove the most of it.

The ads said: Do something on Your device and share it to all your iOS units.
Wheb I change a photo on my iMac in iPhoto it will not sync to iPad or iPhone.
I first have to delet it and than it will sync.
When I write something avout a Photo i n ihoto this information can not be seen on my devices (iPhoto on them too)
The app Numbers works just fine and update correctly.
What do I do wrong?

Chamar wrote:
I'm possibly wrong here but I suspect opening a brand new MBP to add parts yourself will void the warranty. It is probably in the small print. I certainly would not risk it for an expensive Apple product.
Some (Windows) laptops have easy access to memory and disk slots that do not necessitate taking the complete back cover off. However, Apple does not make life easy for you.
However, if you are going for a 'used' machine it is probably worth a try.
Not possibly, definitely wrong, Ram and Hard Drive are considered user replaceable and will not void the warranty if changed.

Similar Messages

I have problems transferring files from PC to Mac and from Mac to Mac

I have problems transferring files from PC to Mac, and from Mac to Mac. PC to PC is fine. Nothing but problems with the Mac. One example:
While working on my PC, I open shared folders on an external HDD connected to the Mac. I click on paste to move the files. I get an error after a few seconds to a minute of trying to move several files from my PC Win 7 to Mac OS Maverick, that there is a file already at the destination on Mac. This statement is true, but it was just put there because I am copying them over in that same action. It reads 0Kb and wasn't there before I started. Then I get an error: The Action Cannot be completed because the folder is open in another program. Close the folder or file and try again..
Whether I click on it a bunch right of way or wait, it still takes about 45 seconds. I have to do it with every file and it only happens when copying from a PC to Mac. I have even restarted both computers so nothing is using any files. If I copy one file at a time, I don't get any error.
So I have one file to move, no problem. If move 5 files, The first will go fine, but it shows all 5 files in folder at once. All other files than the first show 0kb. I get the file already existing error once it starts the second file transfer, and I select move and replace. Then I get The Action Cannot be completed because the folder is open in another program. I wait or click repeatedly until it starts to move file. That file will then show something other than 0kb. When it is done, the error process starts all over. I tried checking the PC with unlocker, but the files do not show themselves locked on the PC.

Its not only French. Even certain characters in English will come across as gobblydegook from 1 platform to another. I see this in emails that likely were composed in Word & the characters don't come across.
Not sure if this is still true, but years ago someone explained that there is a standard character set & then I think its extended characters & those vary from platform to platform or language to language, etc.

I just synced my iPhone and lost all the info in notes from my phone. It was replaced with whT was on my iMac how do you make the sync go from phone to desktop and not the other way around

I Just synced my iPhone and lost all the info in notes I had on the phone. How do you have the info sync from phone to desktop and not the other way around as I usually make contact changes etc on my phone. I would then like to be able to sync that info from desktop to ipad thanks

It does make sense. The iPhone is a one-person device and just syncs to one computer.
The way it should work is as follows:
Old computer content ---> New computer
New computer <---> syncs to iPhone
But the way you are trying to operate sounds like:
Old computer content ---> iPhone
... and ...
New computer content <---> iPhone
So simply move your old stuff (either directly from iTunes, or from a computer backup) to the new computer, have it all there, then sync your iPhone to the new machine.

Problems with retrieving data from tables with 240 and more records

Hi,
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.
I installed Oracle 11.2.0 Client and I started to have problems with retrieving data from tables.
First I used the same connection string, driver and so on (O10 Oracle 10g) then I tried ORA Oracle but with no luck. The result is like this:
I'm able to connect to database. I'm able to retrieve data but from small tables (e.g. with 110 records it works perfectly using both O10 and ORA drivers). When I try to retrieve data from tables with like 240 and more records retrieval simply hangs (nothing happens at all - no error, no timeout). Application seems to hang forever.
I'm using Powerbuilder to connect to Database (either PB10.5 using O10 driver or PB12 using ORA driver). I used DBTrace, so I see that query hangs on the first FETCH.
So for the retrievals that hang I have something like:
(3260008): BIND SELECT OUTPUT BUFFER (DataWindow):(DBI_SELBIND) (0.186 MS / 18978.709 MS)
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=1
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): EXECUTE:(DBI_DW_EXECUTE) (192.982 MS / 19171.691 MS)
(3260008): FETCH NEXT:(DBI_FETCHNEXT)
and this is the last line,
while for retrievals that end, I have FETCH producing time, data in buffer and moving to the next Fetch until all data is retrieved
On the side note, I have no problems with retrieving data either by SQL Developer or DbVisualizer.
Problems started when I installed 11.2.0 Client. Even if I want to use 10.0.1 Client, the same problem occurs. So I guess something from 11.2.0 overrides 10.0.1 settings.
I will appreciate any comments/hints/help.
Thank you very much.

pgoel wrote:
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.Earlier (before installing new stuff) did you ever try retrieving data from big tables (like 240 and more records), if yes, was it working?Yes, with Oracle 10g client (before installing 11g) I was able to retrieve any data, either it was 10k+ records or 100 records. Installing 11g client changed something that even using old 10g client (which I still have installed) fails to work. The same problem occur no matter I'm using 10g or 11g client now. Powerbuilder hangs on retrieving tables with more than like 240 records.
Thanks.

I am looking to make the switch from pc to mac and have been eyeing the MBP 13". I would like to know whether it is fine to add RAM and SSD myself? any compatibility or warranty problems? what brand/type of RAM and SSD is the best fit? thank you.

i am looking to make the switch from pc to mac and have been eyeing the MBP 13". I would like to know whether it is fine to add RAM and SSD myself? any compatibility or warranty problems? what brand/type of RAM and SSD is the best fit? thank you.

Chamar wrote:
I'm possibly wrong here but I suspect opening a brand new MBP to add parts yourself will void the warranty. It is probably in the small print. I certainly would not risk it for an expensive Apple product.
Some (Windows) laptops have easy access to memory and disk slots that do not necessitate taking the complete back cover off. However, Apple does not make life easy for you.
However, if you are going for a 'used' machine it is probably worth a try.
Not possibly, definitely wrong, Ram and Hard Drive are considered user replaceable and will not void the warranty if changed.

My iPhone 6 went from color to black and white

My iPhone 6 went from color to black and white. How do I get back to color?

Of course it's not the quick fix lol. Sorry that didn't work for you, that is the only setting I'm aware that would cause that behavior. Hopefully someone else will assist if they know of another way that may happen. The next thing I would recommend is backing up the iPhone and then doing a reset.
Since you have an iPhone 6 Plus it is most likely still under warranty. If you have time you could try reaching out to Apple support directly by going to there support page, linked below, and clicking "Get Started".
https://www.apple.com/support/contact/
If there are any other important details, like it only occurs in a specific app, feel free to include those in this post as it may help others to figure out what happened.

Can I get rid of Lion and go back to the previous operating system? I bought Apple because it was simple. I went from loving my Mac to absolutely hating it.

Can I get rid of Lion and go back to the previous operating system? I bought Apple because it was simple. I went from loving my Mac to absolutely hating it.

Check out this thread.

TS3147 After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple,"

After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple," This problem happened right after I installed Mountain Lion. I then downloaded Canon's upgraded software and drivers for the MX 870 and the problem was resolved. Now one month later, the problem has returned.

rjliii wrote:
Solved problem with original Canon software. When I downloaded Canon software upgraded for OS X 10.8, I got all by Navigator Ex. Noticed that on Canon's site, the upgraded version is 3.1; my app was 2.1. Upgraded to 3.1 for Nav. Ex, and it works.
You should still use Image Capture IMHO. If it was my gear, that's what I would do. No need to worry about software upgrades.

HT201365 Hello, someone stole my sons IPhone today in his gym class. I have the find my iphone app on my phone BUT he is not a listed device. I went into his itunes account and downloaded the app under his account. Now I just need to figure out how to use

Hello, someone stole my sons IPhone today in his gym class. I have the "find my iphone app" on my phone BUT he is not a listed device. I went into his itunes account and downloaded the "find my iphone app" app under his account. When I try to log into "find my iphone" under his name on my device I get an error msg involving icloud......he is MUCH better at this stuff then I am BUT he is in school and now I need to figure out how to use the "find my iphone app". PLEASE HELP

It doesn't matter whick account you use to download the app.
You have to sign into the app (or iCloud.com from a web browser on your computer) with his Apple ID & password.
Find My iPhone will only work if it was enabled in the iCloud settings on the device and it was powered on with a connection to the internet

I'm going to get the I Mac and since the new I Mac doesn't have DVD drive on it I was thinking to get the Samsung SE-506AB Slim Portable Blu-ray Writer in order to burn movies from I movie do I need a special software for that since the SE-506ab comes onl

I’m going to get the I Mac and since the new I Mac doesn’t have DVD drive on it I was thinking to get the Samsung SE-506AB Slim Portable Blu-ray Writer in order to burn movies from I movie do I need a special software for that since the SE-506ab comes only with windows software.. but I did check and it is compatible with apple. Can you please advise me and or let me know if I’m buying the right stuff or if there is any other blu ray that will work with the I mac as plug and play.
Thank you
Haim

This freezing reminds me of really old Macs, long ago, in the days of the old-school peripherals like SCSI drives, terminators, scanners and the like. If you had a SCSI conflict, like the wrong device ID's or something, you'd freeze up like that. Back in those days you'd call 800-SOS-APPLE (AAPL?) and they'd run you through disconnecting all your extra hardware - Jaz and Zip drives, CD burners, scanners etc and then eliminate them one by one by adding them incrementally and testing for the freeze/bomb dialog.
But, today we have Firewire and none of those ancient issues (no free lifetime tech support either). My iMac's ports are all full, and I only know which devices are connected when I have to remove something for another device. iSight, scanner, card reader, external hard drive, USB soundsticks, etc. You wouldn't happen to have any SCSI devices hooked up, would you?
Out of curiosity, have you tried a different USB/Firewire port for the hard drive? Or run the hardware test DVD that comes with your computer? This weird freezing seems to suggest a problem with the computer, RAM or network more than a device. Bad devices, in my experience, cause kernel panics, not freezing.

How to capture a .gif file from a spectrum analyzer and save the file in PC

I want to capture a .gif file from a spectrum analyzer and save the file in PC, but I've got a problem when read data from the instrument. I'm not sure how to format the string got from the instrument , When I use "%s" or "%t" as the read string format the data got from the instrument is truncated.
my code are as follows, could anyone tell me where i am wrong?
char resultsArray[5000];
viPrintf(hSpectrumInstr, ":MMEMTORCR 'CICTURE.GIF'\n");
viQueryf(hSpectrumInstr, ":MMEMATA? 'CICTURE.GIF'\n", "%t", resultsArray);
printf("%s", resultsArray);
getchar();
Solved!
Go to Solution.
Attachments:
readResult.docx ‏50 KB

char resultsArray[5000];
viPrintf(hSpectrumInstr, ":MMEMTORCR 'CICTURE.GIF'\n");
viQueryf(hSpectrumInstr, ":MMEMATA? 'CICTURE.GIF'\n", "%b", resultsArray);

Updated my iPod touch 3rd gen to 5.0.1 from 4.3.2 and now the screen my iPod won't work anymore.

Updated my iPod touch 3rd gen to 5.0.1 from 4.3.2 and now the screen my iPod won't work anymore. I restored it, I backed it up and I held the power and Home buttons for the reboot and still nothing. I've been looking to see if any one had the same problem and one guy did but they tOld him it was his hardware, but I don't think it was because my friend was able to get it working but it would stop working again like in 10min. So, has anyone had the same problem and can help? Please, I will greatly apretiate it. :)

What do you mnean that the screen does not work?
When you touch the screen the iPod does not respond?
Nothing shows on the screen?
Or what?

Got a new iPhone that I've been using for about a month now, so the question is how can I get the pictures from my old iPhone and keep the pictures I have on the new iPhone?

Got a new iPhone that I've been using for about a month now, so the question is how can I get the pictures from my old iPhone and keep the pictures I have on the new iPhone?

Connect old iPhone to computer and save the pictures on computer.
Connect new iPhone and sync the pictures to your new iPhone.

From PC to Mac - copying playlists the easy way

I've jumped from PC to Mac & have done the easy bit - moving over my music to the Mac. I've searched & I'm sure it's been answered before, but can't find the answer...
I know there's a library file (or something like that) which I can copy over from the PC to the Mac which remembers all playlists etc & immediately restores them. What's it called & what do I do? I presume a simple 'copy, p[aste' job - but to precisely where on the Mac HD?
Also - does that take care of any song names I've changed etc, or fo I have to do all of that again?
Thanks in advance

Parallels should be able to handle that without any problems.
There is a version of both of those that will run on the Mac. So you might consider upgrading to that version instead of going with Windows on your Mac.
Allan

I just installed iTunes on my computer, where I already have all my music. I went to Edit Preferences Advanced, and changed the iTunes Media Folder Location to where I have all my music, in the "Local Disk." But iTunes wont import all my music. Help?

I just installed iTunes on my computer, where I already have all my music. I went to Edit > Preferences > Advanced, and changed the iTunes Media Folder Location to where I have all my music, in the "Local Disk." But iTunes wont import all my music. Help?

Have you looked in the Music App on your iPhone? On the iPhone music is played by the Music App not iTunes.

Sync Problems 1 - I went from PC to Mac and Iove the most of it.

Similar Messages

Maybe you are looking for