Sync problems after itunes update!!!!!

I have had no problem with the Nan 6th Gen since new but since the last itunes update I cannot sync my music but I get the message that it is connected but it is not recognised.
As advised on the error message I have reset the Nano and re-installed itunes with the same results.
Has anyone had the same experience or can help?

I cannot sync my music but I get the message that it is connected but it is not recognised.
As advised on the error message I have reset the Nano and re-installed itunes with the same results.
Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Similar Messages

3gs syncing problem after itunes update to itunes 7

When syncing my 3gs with updated itunes7, will not complete sync because"session could not be started" and "connection could not be established". Ran diagnostic and all seemed fine.

Problem solved after upgrading to IOS6!

Sync problem after iTunes update

Every time there is a new iTunes update and I go to sync my iPhone for the first time I end up with double calendar entries. I receive a "Sync Alert" that says this:
+"Syncing with Bob iPhone will change more than 5% of your Calendars on this computer."+
If I go ahead and allow the sync to continue I end up with double calendar entries throughout my entire calendar. I use Entourage, so I don't know if there is a conflict happening because of that, but I don't think so. The warning message has to do with syncing my iPhone with iCal.
Any thoughts on this and why it's always happening after an iTunes update?

Someone from Mactopia was able to help me figure this one out.

Sync problems after iTunes Match update

iTunes Match has created an ongoing sync problem for me. If Match updates automatically based on songs I've purchased from the iTunes store, then I usually have no issues with the sync function. However, if I load a CD that is not in the Match library, or if I just manually do an update to Match, it causes my 160gb iPod to take 15-20 minutes to sync. Why is this happening?

I cannot sync my music but I get the message that it is connected but it is not recognised.
As advised on the error message I have reset the Nano and re-installed itunes with the same results.
Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Problem After iTunes Update Installed

Software Updates did its automatic check and I noticed the window on the desktop that said there was an update. I looked at the details and I thought it said itunes update 10.6.3. I read the details and installed it. After it installed, I restarted the computer and befor the aple appeared but there was still the gray screen I did NOT hear the tone. After about 30 seconds the apple appeared and the gear and it booted to the desktop.
I looked at the version of iTunes by going to About iTunes and the moving box said (althought it was really small this time) but I checked it again and it said 10.6 (4.0). However, I thought when the Updater said there was a newer version of iTunes, I thought it said version 10.6.3, with no paranthesis.
I restarted the MacBook Pro again, and still there was no tone but the gray window was present for about 10 secs then the Apple, and it booted to the desktop. I thought I should get a tone so I shut the MacBook Pro down and pressed the Power button to boot up in Safe Mode, but I did not hear the tone so I did not press the Shift key. I checked the version of iTunes that was installed (assuming a newer version was installed) and it is 10.6 (4.0).
I tured the computer off and tried to do a SMC Reset. I turned the MacBook Pro of left for a couple hours, came back, plugged the MagSafe Adapter in and tried to boot up the computer, no tone heard, the gray screen appeared for about 20 secs, then the Apple, then the gear and it booted to the desktop.
Something has been recently occuring. when I plug in the MagSafe Adapter initially, next to the battery up in the menu next to the Bluetooth icon it says "Not charging" but after about 5 secs it has the charging sign in the middle of the battery. Not sure if this is related or what. I tried to do an SMC Reset when I saw this "Not Charging" when I plugged in the Mag Safe but it did not change anything as far as when I plug in the Mag Safe Adapter it still initially says "Not Charging" for about 5 secs and then it goes away.
I am concerned what to do about hearing no tone and the version of iTunes I thought it said it was going to install but when I checked About iTunes it says 10.6 (4.0)
any help in this matter. I am not the best when it comes to computer knowledge.
thanks

Your explanations have clarified some things (including one misconception I had from not reading your post carefully enough -- I thought you had "hard shut down" by holding down the power button, no in rereading your post, it sounds like you did not do that but rather shut down in an orderly way, that was my misconception).
I too was not aware of the Magsafe Power Supply issues, but it sounds like you would be well off to use that settlement check to obtain a new one. Hopefully that will resolve the charging issues you saw. I work somewhere where there are literally hundreds of Macbook Pro and Air laptops, all with these Magsafe adaptors, and I haven't seen any such complaints, but perhaps yours was part of a bad batch, it sounds like you're not the only one. (I have seen such chargers just wear out after 4-5 years, but then they just stop working altogether, versus the "charging/not charging" business you were seeing.)
I am going to surmise that none of the Magsafe issues have anything to do with iTunes because iTunes is just an application that is not related to the way the laptop charges. I suspect it is a coincidence that the iTunes update happened around the same time. The Magsafe behaviors probably would have manifested themselves even if you had not done the update.
Is your sound working in iTunes? Do you still not have boot up sound? If the answer to both of these questions is yes, you may want to read this Apple article http://support.apple.com/kb/ht1379 and consider doing a reset of your PRAM and/or NVRAM. I noticed that PRAM does control some sound settings and "attention tones" of the computer (which might include a startup tone perhaps). Something to consider, it's hard to offer advice in these cases without being there in person to observe things. Good luck with all this.
Before you do any resets on PRAM or NVRAM, do re-check your sound settings to confirm that the mute box is not checked. When my Macbook Pro mute box is checked, I get no startup chime also. You might consider checking the mute box, restaring, then unchecking it again just to see if that matters. One last thing -- some other posts in the Discussions involved Macs without a startup chime and people got their chime back after disconnecting or fixing a peripheral that was plugged in via USB or Firewire. I don't understand why that would be, but that is what they reported -- something else for you to consider.

Syncing problems after iTunes created automatic playlist

Because I have more music in my library than can fit on my iPod Touch, iTunes created an automatic playlist that would serve as the folder for what would go on my iPod.
When this happened, only that playlist would sync with the iPod, so the applications I downloaded on my computer did not get synced onto the iPod, so I deleted the playlist.
Now, when I sync, nothing gets transferred onto the iPod.
How do I fix this problem? Also, how do I tell iTunes what particular songs I want on the iPod?

Click here and follow the instructions.
(38317)

Had a problem after download updated itune, error 7 (window error 126) cant open itune at all

Had a problem after download updated itune, it failed as Error code MSVCR80 and then next message is error 7 (window error 126), cant open itune at all

Had a problem after download updated itune, it failed as Error code MSVCR80 and then next message is error 7 (window error 126), cant open itune at all

Links to songs lost after iTunes updates

Hi everyone,
I seem to have to have two recurring problems with iTunes.
1. After iTunes updates, I seem to lose the link to numerous songs. When I click on them, I get the little exclamation mark and a window asking if I want to locate the song manually in the library. This time around, I've got over 1500 songs in this boat. I can't locate them all manually. Each time I find one, it asks if I want iTunes to look for others. I click OK, but then it says it can't find any more.
2. I have a lot of duplicate songs. The software seems to duplicate them itself. One of the versions will have the little exclamation mark beside it, the other will work. Is there a way to bulk clean this up? It is a rather lengthy process otherwise.
Is anyone else having these types of problems?
Thanks
Orest

Can't answer your issue because I don't use itunes to organize my music(MP3). I use the Finder. I do move my MP3 files to my 5 Macs and get the job done in a few minutes with never a problem.
I rip music, then pick my favorite songs. I delete the track number(working with a copy of the original MP3) and place my 2,160 MP3 files into a folder of my choice name. I leave my other "untouched" original MP3 in an archive on either a firewire drive or another sata internal drive for safe keeping.
Now I have a folder called whatever containing many folders such as rock, metal, jazz, etc...inside those folder of course would be organized by artist folder, album folder then the music.
When I re-do my Macs I just copy my favorites folder over to it. Launch itunes then add to the library(just select the top folder and it adds everything inside). I did id3 tag my favorites originally and also used GROUPING to then have a way to sort all the songs instantly, select all and choose the equalizer. I name my playlist the same name as GROUPING name to make it simple to transfer my favorite into each playlist.
Lots of typing here but infinitely easier to work with my huge collection of MP3 files.

After iTunes update, iTunes.exe System Error - msvcr80.dll missing & icudt49.dll missing.

After iTunes update, iTunes.exe System Error - msvcr80.dll missing. Followed the support suggestion & uninstalled then re-installed iTunes 5 times & still no good so followed Apples advice & uninstalled again then went into programme files & manually deleted the files re-installed again & now getting iTunes.exe System Error - icudt49.dll missing. I give up, anyone out there help ?

I've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet:http://support.apple.com/kb/TS5376 it takes you through the process. WARNING - it takes a little time! The main purpose of this is to remove any trace of the old version of iTunes from your computer...
Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot again!
Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
Reboot!
Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck!

Instant crash after iTunes update 11.1.2

instant crash after iTunes update 11.1.2 when opening itunes pages open then crashes, also error code before crash and still after -45054 also have multiple librarys which could be the gremlins

I am having exactly the same problem with my iPod Touch after updating iTunes. I purchased a new album earlier and when I go to 'On this iPod' the entire album is greyed out and there are dotted circles next to each song. Has anyone got a solution to this?

I keep getting a msvcr80.dll error after iTunes update failed?

I keep getting a msvcr80.dll error after iTunes update failed?

Seems the base of the problem is the update installation does not change the libraries but the software wants to see them changed. So the user has to go clear out all software that shares the libraries and then install the full version so they are rebuilt properly.

Multiple Samsung Stratosphere problems after FF1 update

There have been multiple posts on various issues users have found after the recent Stratopshere FF1 update. Some were replys to older posts and some only touched on a single issue. I wanted to consolodate into one thread, and hopefully get teh attention of Verizon to maybe reply here.
For reference, a lot has been discuss here --> https://community.verizonwireless.com/message/874446
Summary: Verizon and Samsung have finally updated the Stratosphere almost 1 year after release. This updated the phone from Android 2.3.5 to Android 2.3.6. Going by filename, this is known as the FF1 update. This update went live at the end of August 2012, and most users were upgraded before mid September 2012.
There were some noticable changes in this update:
-Lock screen has changed. The puzzle piece and glass lock options have been removed. New options have been added, such as facial recognition unlock.
-Call answering screen has changed, introducing the option to ignore call with a message.
-Camera now has digital zoom ability.
-Ability to uninstall the 2 games the phone comes with (Need for Speed and Lets Golf)
-Phone icon has changed ever so slightly
-Wifi icon now included up and down arrows to indicate data is being sent or recieved
-Wallpaper no longer "stretches" over multiple screens - ie, it no longer scrolls as you move from screen to screen
-The visual voicemail app has been improved (I have personally not used this feature)
-Callback number is now supported in text / picture messages
-Android core OS updated from 2.3.5 to 2.3.6 (both versions are still Gingerbread)
-Update to how the device deals with the end of scrolling. It used to rubber-band bounce back, now it will just give a green bar and expand the bar as you scroll. (I cannot fault Samsung for this change as this was at teh core of an Apple lawsuit and has been changed in newer versions of Android.)
-(I am sure there are more. please list any others you may have noticed)
I have found some problems, and others have confirmed that this is (at least) somewhat widespread:
-The biggest problem is with wifi connectivity. Upon an initial connection to wifi, everything works great. After somewhere between 15minutes and 2 hours, problems start happening. Its as if the wifi keeps hanging or reconnecting. Download speeds (tested with the SpeedTest.com app) slow to about one third of normal. Apps like Facebook that require a constant connection will just time out.
-It appears the signal strength for 3g and 4g connections is lower. There are places where I used to get a 4g connection, and now I only get 3g. Some palces I fall back to just 2g digital.
Another minor issue i found was with text messages. When you reply to a message, it no longer automatically focuses the text in the input box. You have to first click into the box to start typing. Not a huge deal, but one more step to take over and over. Minor annoyence.
At my house, I struggle to get a 3g or 4g signal. I depend on wifi for my data connection. So with the wifi connection problem introduced by teh FF1 update, my phone is somewhat useless to me now while at home. Here are teh troubleshooting steps I have been through so far to attempt to fix the wifi problem:
-Complete factory reset on my phone. (did not help)
-Pull battery and SIM card out of phone for 15 minutes. (did not help)
-Went to a Verizon store. The guy at the store was helpful, and said he also had a Stratosphere and was getting the same wifi problems after the update. He said all he could do was to send me out a replacement phone. I got the replacement phone, and it had the same problems.
-I read in multiple palces that Android 2.3.6 has a bug within wifi and DHCP. Apparently if you have a DHCP lease set to "forever", the phone will keep requesting a new address. Setting the DHCP server on the router to something like 2 weeks, or using a static IP is supposed to solve this. I have a NetGear N900 router, and I can not change teh DHCP lease time. It appears, however, that my router is not sending out "forever" leases. But just to make sure, I gave my phone a static IP. (None of these steps made any difference).
The only thing that temporarily fixes the problem is a reboot of the phone. This will again give you anywhere from 15min to 2 hours of good wifi use before problems start happening.
I have now had this update for over a week, and on 2 phones. I still can't maintain a wifi connection for much longer than 15 minutes without problems starting up.
I am asking Verizon or Samsung to at least confirm this issue if possible. Maybe there are newer revs of the Stratopshere hardware that don't have this problem. Or there is something unique about my (and apparently others) situation. But it seems like Verizon's current stance is to offer a repalcement phone (as currently all Stratospheres are within their 1 year manufacture warranty as the phone has not been ouy for quite 1 year yet).
I am asking for a workaround for this problem, or a true fix adressed by a new software update, or at least allow us to roll back to the original Andorid 2.3.5 software.
I have had my original Stratosphere for almost a year with no wifi problems - then get the FF1 update and have had nothing but problems on 2 different phones.
Thank you for your time.

Thanks for starting a comprehensive thread on problems with this update. I want to add one more.
I have Bluetooth in my car (a 2004 model), and previously the phone has connected to it practically instantly when I start the car. Since the update, I have never been able to connect the phone to the car by Bluetooth. Several times the phone has made a standard notification sound at the moment it should be connecting to Bluetooth, though no notification appears. I have no idea what that could mean.The car's Bluetooth shows up as paired in the list of devices in Settings > Wireless & networks > Bluetooth settings. I haven't seen this widely reported as an update issue, but perhaps some others have experienced it too.
UPDATE: I finally did some testing, and found that the notification was to signal the extremely brief appearance of a dialog indicating that the car's Bluetooth was requesting a connection. Accepting that request let the phone connect with the car, and calls went to the car's sound system as they should. When I turned the car off and back on (just the electrical system; not wasting any gas on this!), the connection was established immediately, so apparently the acceptance only had to be done once. Nevertheless, it did have to be done, and the dialog notification disappears within seconds. I believe it would have been possible to go into Bluetooth settings and accept the connection request there if I missed the notification; but not seeing the notification, I might not know to do this.
One further observation: When I turned the phone's Bluetooth off and back on after a connection had been established, leaving the car on the whole time, the two did not reconnect. I believe that may be different from before the update, but I'm not really sure.
Message was updated by David Rensberger

HT4061 My gateway PC is locked up after itunes update. When i restarted the computer for the hangers to take effect. Now my pc is locked up. It gives me a client Mac address and no boot file name received. What happened, and how do I get my pc back?

jute way pc locked up after iTunes update. It says client Mac address 001320 be ad 25 . PXE E53 No boot file name received
pXE MOF. Exiting Broadcom PXE. ROM . How do I unlock my pc?

jute way pc locked up after iTunes update. It says client Mac address 001320 be ad 25 . PXE E53 No boot file name received
pXE MOF. Exiting Broadcom PXE. ROM . How do I unlock my pc?

Error code after itunes update -42404

error code after itunes update -42404 cannot connect to ipad it is telling me to restore ipad, and cannot connect to store...
Message was edited by: CFC.Steve

I assume you updated itunes on your computer. PC or Mac?
Look at the posts in the More Like This area to the right side of this page.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

EFI Problems after last update anyway to downgrade ??

Hello
EFI Problems after last update anyway to downgrade ??
i have updated my MacBook 2010 EFI to MB71.0039.B0E which is 2.1 version
after updating to this version the Boot time become much slower when i want to change boot partition
and shutdown become very much slower and startup too
i tried to install Mac OS X Lion again but it doesnt help
can i downgrade to this version 2.0 ???
or when Apple will release the new version ?
or where can i send a feedback regarding this issues !!!!
Thanks

These are user to user forums. If anyone knows the answer, they will give it.
You can always call Apple support which may charge a fee or you can patiently wait for an answer here, which is free.

Sync problems after itunes update!!!!!

Similar Messages

Maybe you are looking for