Sync problems- Movie Maker

I just started using Movie Maker and started with a simple video, a background staying the same throughout the entire video (a solid picture just coppied and pasted throughout the entire thing, a music track layered on top of that and then I added lyrics
to go with the song via captions. When I export it any way the captions fall behind by like three seconds give or take, and I can't figure out why. Does someone know how to fix this? Or make it right?

Hi,
As the issue is specific with Movie Maker , you may contact Microsoft  Movie Maker forum for further assistance on the issue:
Contact - Movie Maker Forum:
http://www.windowsmoviemakers.net/Forums/ShowForum.aspx?ForumID=28
Please revert for any clarification on this or any Windows issue. We will be glad to help you.
Roger Lu
TechNet Community Support

Similar Messages

  • Sync iPhoto Movies Problem

    Help!
    My iPad won't sync my movie clips I keep in my iPhoto application. It simply won't sync them even though I DO have the itunes tab clicked "on" that says sync videos within photos.
    Can anyone suggest a solution?

    Same problem here with my Panasonic ZS3. Check to make sure your video files match the specs that the iPad will play. You can see a great post by Ian Parkinson that describes exactly the specs needed here:
    http://discussions.apple.com/message.jspa?messageID=11371207#11371207

  • QuickTime 7 Upgrade  and Windows Movie Maker v6 Audio Problem

    Since ITunes up graded my quick time player to the latest version I can no longer add audio to my movies made on Windows Movie Maker version 6. The application crashes. Uninstalling Quick Time player seven and installing Quick Time Player 6 solves the problem but I loose the use of ITunes. I have included the crash information how do I correct this issue.
    Problem Event Name: APPCRASH
    Application Name: MOVIEMK.exe
    Application Version: 6.0.6000.16386
    Application Timestamp: 4549b5b6
    Fault Module Name: QuickTimeAudioSupport.qtx
    Fault Module Version: 7.6.3.0
    Fault Module Timestamp: 4837d2d4
    Exception Code: c0000005
    Exception Offset: 0013e9e2
    OS Version: 6.0.6001.2.1.0.768.3
    Locale ID: 1033
    Additional Information 1: fd00
    Additional Information 2: ea6f5fe8924aaa756324d57f87834160
    Additional Information 3: fd00
    Additional Information 4: ea6f5fe8924aaa756324d57f87834160

    Any updates on this?
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Video sync problem in vista premium 32bit even after enabling all movies

    video sync problem in vista premium 32bit even after enabling all movies and or movies.the vids are in itunes and ive tried to sync again and again.with no luck .
    and i cant seem to find a related or symular problem. has anyone else had this problem?

    cbeer77 wrote:
    Not sure how to find out the GPU acceleration
    Edit > Preferences > General
    If GPU acceleration is checked, uncheck it and see if that helps.
    Also:
    Could you give us a Mediainfo or Gspot screen shot of what's in the AVI wrapper?
    Please  answer Richard's question.

  • New Touch Missing Movie Rental/Game "In-App Purchase" Sync Problems.

    just picked up the new iPod Touch 4G (64GB) and am syncing to Win7 Starter (32bit).
    I rented a few movies before I bought the Touch. They all seemed to download fine. the "Move" sync process seemed like it worked perfectly. When I looked back at my movies on my touch, some of them were missing. When I double checked my rental section in iTunes the movies were missing. I remember a dialogue later, saying that the file couldn't be found. I ran a quick windows search with no results.
    So it seems like I could "Move" the movie fine, but after the sync finished, the files were gone from both the computer and the touch.
    Could someone please explain this, and what I may do to recover those files? I did pay for them after all, and would still like to watch them. I just don't want to pay for them twice.
    Also (another similar issue):
    I downloaded and played the game "FieldRunners" fine, but then decided to do an "in-app purchase" for the next level. I clicked download/entered my info/ and it seemed to download correctly, but when I re-entered the app, the level was not available to play. just weird.
    FYI: this is my first iOS device, so please don't flame me for newbie ignorance.
    Any advice/suggestions are welcome!
    Thanks.
    Overall, Here is my experience with the new touch:
    First Connection: Installation did not work. Unplugged / Replugged USB worked correctly. (no restart necessary).
    Selecting content to sync: Did not detect Outlook 2010 (FULL/NOT BETA) for Contacts/Calendar/etc.
    I chose not to sync this through iTunes, and instead setup an "Exchange" account on my iPod Touch through google (m.google.com). Works perfectly.
    I have my other email addresses forwarded through gmail to take care of push notifications. I still don't have Outlook 2010 calendars synced with google yet, but I'll figure that out.
    Then I noticed the other sync problems mentioned above.
    Again, any help would be appreciated!

    Hi Epski
    Let us know how you go as i'm having the same issue also. I upgraded to yosemite and itunes 12 at the same time and thought the OS upgrade was the issue. I downgraded back to Mavericks again (for lots of reasons i won't go in to here) thinking this would fix the problem but it didn't.
    When i play any video content from itunes 12 in full screen goes dark once the controls fade away. QT, appletv or anything else plays them perfectly, as per itunes 11!
    You don't have a Samsung TV by any chance do you?

  • My room mate was trying to be funny and deleted all my programs that related to my Camera working...Movie maker...quicktime ect...How do I repair this problem.

    My room mate was trying to be funny and deleted all my programs that related to my Camera working...Movie maker...quicktime ect...How do I repair this problem.

    Custom install QT right from the system DVD (#1) that originally came w/your computer. 
    Your cam files can be redownload/reinstalled from where ever you originally got them from, CD/DVD or the manufacturer's website.
    You did not provide your OS information nor the rest of the files that were deleted.  Therefore, all I can tell you is that your "Apple" files can be redownloaded from the above mentioned DVD.  Your 3rd party files can be reinstalled from their CD/DVD or from the vendor websites.

  • Movie Maker Problems

    Hello Microsoft! I am just reporting that when I downloaded Movie Maker from the official microsoft site, I did not get MovieMaker. wlsetup appeared and it downloaded windows essentials but that was not anywhere in my computer. I clicked start and searched
    Movie Maker and Microsoft Essentials but nothing appeared. When I redownloaded the installer and installed, it said I already had the programs on my computer. I have checked everywhere, but there is no Movie Maker. I believe there may be a problem. Please
    email a reply to my gmail: [email protected]

    Hi,
    You can try few steps and check if it helps..
    i) First make sure all windows updates are completed and there are no pending updates.
    ii) Open HP Support Assistant from Start-->All Programs--> HP Help and Support. In HP Support Assitant click on
       Maintain and check if there are any pending updates. If there are pending updates then complete all the updates.
    Sometimes it could be due to display and audio drivers.. You can try updating the the display and audio drivers from here:
    Software & Driver Downloads - HP Pavilion dm4-2070us Entertainment Notebook PC
    If none of the above helps then you can try uninstalling and reinstalling Movie maker from control panel.
    Movie Maker
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • Problems with Movie Maker under Parallels.

    Hello, I run Windows 7 on my iMAC via Parallells without any problems normally. It works e.g. fine to run the Windows Office programs. But I run into problems when I try to run Windows Movie Maker.
    I get the instruction to run dxdiag.exe to verify my DDI-version.
    And then I get the following message from Windows:
    '"The file prl_umdd.dll is not digitally signed, which means that it has not been tested by Microsoft Windows
    Hardware Quality Labs (WHQL). You can maybe get a WHQL-signed file from the hardware supplyer."
    Is this a wellknown problem among mac-users who run Windows via Parallels?
    Any suggestion what I should do?

    You should probably post your question on the Parallels or Windows forum as neither are Apple products and this is not a compatibility issue btween Mac OS and Windows, which is the focus of this forum'
    http://windowsforum.com/
    http://forums.parallels.com

  • Probleme bei Text avi.Datei Movie Maker nach Premiere 6 - Import.

    Hallo alle zusammen,
    spezielle Titel im Movie Maker aufgenommen, lassen sich als avi speichern auf DV Band ausspielen und am TV abspielen. Windows Player spielt die Titel auch im Computer anstandslos ab. Pinnacle Studio 8 hat teilweise Probleme beim Import.
    Die Titel lassen sich in Premiere importieren. Sie lassen sich allerdings nicht im Monitorfenster oder Vorschaufenster abspielen. Keine Wiedergabe möglich. Je nach titel bewegt sich der Wiedergabe-Zeiger aber man sieht keinen Titel. Rendern hilft auch nicht.
    Worin liegt der Fehler?
    Der einzige Fehler den ich mir vorstellen kann ist "24 Bit Farbtiefe, bzw. je nach Titel 0 Bit Farbtiefe " (Anzeige bei Eigenschaften Premiere 6).
    Bearbeitet und gespeichert wird alles im Digital Format *.avi
    System: Win XP, Intel Pentium 4 Prozessor m. Hyperthreading,
    Prozessortakt - 3.000 MHz Hauptspeicher - 512 MB, Bustakt - 800 MHz, Direkt X9,
    Festplatte 120 GB, Grafikkarte - nVidia GeForce FX 5200, Grafikspeicher 128 MB
    Danke für Info, alfredo

    Hi
    Blöde Frage: Sind das animierte Titel?
    War die Erstellung der Titeldateien im Moviemaker am gleichen Rechner? wenn nicht mal den CODEC überprüfen.
    Achim Kredelbach

  • How do I burn a DVD R disc with Windows Movie Maker?  It indicates disc error on my DVD player.  Someone thought it had something to do with Itunes?  I reloaded Itunes 1 month ago and had no problem creating this disc then.  Help

    I have made several DVD+R discs in the past using Windows Live Movie Maker sucessfully.  I made one about one month ago for my son's b-day.  I am using the same discs as I had then.  When I tried to burn the disc, it indicates that it is burning, however, when I insert it into the DVD player at home on our TV (like I"ve always done), it indicates disc error.  Someone mentioned that the burner goes out every now and then when Itunes is uploaded?  When I burn the disc, I can pull it up on my home and work computers, so I know that it is there.

    Yes, you can distribute a burned disk of the project to those who can create duplicate disks.  Or create a disk image of the iDVD project using the File ➙ Save as Disk Image menu option.
    Then you can distribute the disk image to those who will burn the disks.  For PCs you'll have to convert the .dmg file to a .iso file so they can burn it.  This website describer how: Mac Help - Convert and Burn Mac .dmg or .img to .iso Windows PC-Compatible Disk Image
    Suggest to them to burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    It would be prudent to rest your optical drive for about 30 minutes after burning 3 disks in a row. That will give the laser time to cool down before you start another batch.
    OT

  • .mov sync problems

    I'm having sync problems with an 11 min Quicktime video
    piece. The project is just a basic interface with control buttons
    (Play, Rew, ffd, etc...) for the video. I've encoded it in several
    ways and still get the same problem. Audio and video are slightly
    out of sync. I normally use pieces that are 3 to 5 minutes long and
    don't have these issues . Could it be that Director has a bug for
    longer length pieces? Please help.

    Alternately, you can try using the MpegAdvance xtra instead
    of
    Quicktime. It is not free, but it works very well, and most
    of the
    commands are the same as QT, so there isn't much of a
    learning curve. I
    have had very good luck using it in the past.
    -Mike
    Sean Wilson wrote:
    > Can you try updating to the latest version of QT (and if
    it works
    > include the installer with your distribution)?
    > Also, ensure you have the latest Director update
    (10.1.1) which includes
    > the latest version of the QuickTime Asset xtra

  • 2014 Sync problems on iPod classic / Please help!! 2014

    Hello community!
    I really need some help with this problem I am having... I have done some research for the past few days on my own but nothing I have found has helped.
    First some specs on my device...
    iPod Classic: 80 GB (I believe this is iPod with video, assumed on the fact that it supports movie syncs)
    iPod software version: 1.1.2 (up to date according to iTunes)
    Formatted for Windows
    Syncing to Dell Inspiron with Windows 7
    iTunes updated to current version (11.4)
    I had much mof my music library uploaded onto my iPod for quite sometime. (close to 14,000 songs synced at 192 kbps) I often like to put my iPod on shuffle and just listen to whatever comes on, but here and there I will skip songs until something I am in the mood for comes on... I began to notice that my iPod was freezing (ON THE DISPLAY ONLY!!! Playback through speakers continued) when I would skip through songs... Once the screen dimmed however, I could once again skip to the next song. I figured this was a problem concerning corrupted files or something similar. These are the steps I took..
    1.) Updated iTunes to version 11.4 and checked for further updates
    2.) ATTEMPTED to check disk within Windows (was unsuccessful and heard the iPod making a lot of 'clicking' noises from within the casing)
    3.) Performed an iPod restore within iTunes
    4.) Performed a check disk within Windows and recovered any bad sectors (SUCCESSFUL)
    5.) Selected 'Music' sync and the option for 'Entire music library'
    6.) UNCHECKED 'Include music videos'
    7.) Reconfigured settings as they were before and made slight changes..
         a.) Checked 'Open iTunes when this iPod is connected'
         b.) Checked 'Sync only checked songs and videos'
         c.) Checked 'Convert higher bit rate songs to '192 kbps' AAC'
         d.) Unchecked 'Manually manage music and videos'
         e.) Unchecked 'Enable disk use'
    8.) Began a sync on my iPod... With well over 10,000 songs I knew this was going to be a lengthy process.. I left computer unattended..
    When I returned to my computer, iTunes was unresponsive... The only way I could get iTunes to show was to minimize a Window on top of iTunes. iTunes states 'Syncing iPod... Do not disconnect' but does not show a rolling progress bar.. I cannot cancel sync, I cannot eject iPod, I cannot close iTunes...
    I attempt to eject iPod device through windows, UNSUCCESSFUL (Cannot unmount generic volume while the device is in use)
    I 'Ctrl+Alt+Dlt' to Task Manager and End Program 'iTunes' UNSUCCESSFUL..
    I End Process 'iTunes.exe *32' and eject iPod through Windows SUCCESSFUL
    When the iPod displayed 'OK to disconnect with load bar, I disconnected the device.
    As soon as this bar was full iPod IMMEDIATELY rebooted completely and powered back up with only 20 songs synced. (Frustration ensues)
    Confused and thinking maybe my screen saver caused an interruption during the sync, I changed screen saver and power saving options to eliminate any possible interruption, REPEATED STEPS 3-8 ABOVE, and started sync again.. Left computer unattended
    Again, coming back to computer much later, iTunes was in the same unresponsive state. Closed iTunes and began looking for answers on the internet. Any and all answers I found stated I should restore iPod, update iTunes, run diagnostics tests, etc., etc...
    All of which I had done EXCEPT for running a diagnostics test..
    Running a diagnostics test: I ran only the tests concerned with 'Device Connectivity' and 'Device sync' tests.. Here are the very interesting results I yielded from these tests...
    Device Connectivity Test:
    Support services:
         'iPod support service is running.' Status: GREEN
         'iTunes Helper is running.' Status: GREEN
         'Apple Mobile Device is running.' Status: GREEN
    Ports:
         'USB ports verified.' Status: GREEN
         'No FireWire (IEEE 1394) ports found.' Status: GREEN
         'iPod found.' Status GREEN
    ALL TESTS PASSED
    Device Sync Tests
    Results:
         No iPod touch, iPhone, or iPad found. Status: RED
    ONE OR MORE TESTS FAILED
    I am at a loss, I realize that Apple has discontinued the iPod Classic but does that mean iTunes will no longer support these devices!?
    And if ANYONE has ANY suggestions for possible steps I can take to regain syncing privileges to my iPod once again, please let me know!
    Also, I have diagnostics test results saved on my desktop and available to post if required!
    Thank you for any and all help!
    -Chris

    !UPDATE!
    I made several adjustments to my sync options and made some progress and am now trying to sync in 'stages' as I like to think of them.
    Here is what I did:
    1.) Under 'Music' tab in 'My iPod' options I opted to sync 'Selected playlists, artists, albums, and genres'
    2.) Selected a small portion of tunes I know I want on my iPod (ended up being close to 3,500 songs.
    3.) Under 'Summary' tab I unchecked the 'Sync only checked songs and videos' box
    4.) Unchecked 'Convert higher bit rate songs to ___ AAC'
    5.) Checked 'Enable disk use'
    6.) Ran a SUCCESSFUL sync!
    I am now running a sync keeping the same adjustments in place and have added 6,556 songs. (SYNC IN PROGRESS)
    I am wondering if trying to convert that many songs to a lower bit rate is causing sync problems and it appears as if I am at least making progress on this. HOWEVER, I really prefer to decrease the bit rate on my songs so I may fit more on my iPod... Usually most of the files I have in iTunes are at 320 kbps with a select few at 192 kbps. I would like to make everything the way it was before my first iPod restore.. 192 kbps, but this also seems to be the cause of the sync problems I am having? Anyone else have a comment on this?
    Thanks again
    -Chris

  • Major "BUG" in Imovie 9 - Audio Sync Problem on Export  !

    Well I'm a hard-core Apple user from day one, but unfortunately today I'm not to proud about the latest version of Imovie 9.
    It seems there has been a "MAJOR audio sync problem on export" in Imovie 9, since July 2009. Apple knows about this bug for a long time now, but didn't release any bugfix yet!
    Here's what it's all about:
    It seems if you use the (custom /manual) speed-adjustments and not the preset slider speeds, you will experience (after exporting your movie) annoying bursts of audio from clips that had been set to mude. The strange thing is that you will only experience this audio-bug after exporting, you will NOT experience it in the project playback mode!
    Here's what you can do:
    Find ALL the clips in your Project that are Speed Adjusted.
    Instead of using a "Custom Speed" percentage, use any of the "Preset Speeds"
    Preset Speeds on the Slider = 12.5%, 25%, 50%, 100%, 200%, 400%, 800%
    Then, export your project as usual.
    No more sync issues.
    Really hope That Apple will come up with a real BUGFIX soon.
    It's a shame that a major bug in a otherwise GREAT PRODUCT, hasen't been fixed yet!
    What's wrong with Apple?...this is not one of their finest hours.
    Still A BIG fan from Imovie HD,...I'll chance to Imovie 9 when the bugs are finaly fixed!

    This is TERRIBLE! I have spent so much time working on this project, and I really don't want to adjust the speed settings to the preset levels, BECAUSE I need to motion of the video to match certain musical points. I can't re-film my video, and I needed this project done TODAY. I made a music video with some kids at summer camp, and today is the last day- the day we were supposed to all watch it together, and now, I've got NOTHING!!!! (Because I can't export it without all those glitches!)
    I am MAJORLY DISAPPOINTED on this one. I've made movies in windows movie maker before, and purposely used imovie, because you know, everything on macs is supposed to be better. Well, I guess I was wrong.

  • Sync problem converting videos with SU

    Hi there. I have owned my Creative Zen Vision:m 30gig player for about 2 weeks now. So far I have really come to love this device. I have learned how to put album art on all my favourite albums with ?Album Art Downloader? and I am using Media Monkey to manage and sync my mp3 files from my pc to my Vision:m. I have even loaded all my photos onto the player and bought the accessories pack so that I can hook it up to my television ? it works perfectly.
    My last challenge (so far) was to figure out how to make this video thing work as I have about 00 videos which I have downloaded from Google video via a plugin for Mozilla Firefox called ?Video Downloader ?. The videos from Google video are encoded into something called a .flv file. I have done A LOT of reading here and other places on how to convert the various formats into formats the player can understand. Apparently the program ?Super? is THE thing for converting almost anything into well anything. I tried it and found out I could select ALL of my videos and select a common setting for them all to be encoded into. My first reaction?. sweeeeeet! The videos did not seem to have lost much quality and when I loaded them to the player, it would play them nicely? or so I thought.
    It did however slowly but inevitably become clear to me that despite my most fierce attempts of denial? there was a sync problem with the audio. Not a huge annoyance but still an annoyance, something which I knew I couldn?t li've with. I therefore rushed to the program and tried to shuffle the settings a bit, changed the codecs changed the containers but nothing would work. The sound sync problem would still be there, lurking. The problem was also present when converting high quality xvid movies.
    This is where my creativity and patience has come to an end. This is where I give up and crawl to you begging for help. I in order for you to help me, I will try to help YOU recreate my scenario.
    I have a video, perhaps a little morbid, where the sync problem is very obvious after you have converted it with super, here is the link http://video.google.com/videoplay?docid=-7233445036972827652
    I use a plugin for Firefox to download videos from Youtube, Google video, etc. called ?Video Downloader?, here?s the link
    https://addons.mozilla.org/firefox/2390/
    The settings I use for Super are the following:
    Output Container: Avi (For Pocket Pc)
    Output Video Codec: Mpeg4
    Video Scale Size: 320*240
    Frame/Sec: 25
    Bitrate: 336
    Hi Quality: ?Checked?
    Stretch It: ?Checked?
    Sampling Freq: 22050
    Bitrate kbps: 28
    Ok if you manage to download the clip from google video (easy) AND convert with Super into a format fitting for the Zen Vision:m without the sync problem? well my joy will break any ?happy-meter? out there
    Ps. I did actually find a way to fix the sync problem, I checked the ?Directshow? for the ffmpeg but the picture was sort of lagging and looking REALLY ugly so that actually created a problem much worse than the previous one.
    Thank you for your time and patience

    I am not sure I can help you but I do have one pice of information. The sync problems arise from converting to the wrong frame rate. If you can choose the frame rate for the videos you convert to then you can test different rates and find the right rate. Keep in mind that there is currently no way to determine the approiate frome rate without teting it.
    [Edit]
    BTW is that MS-mpeg4-v or MS-mpeg4-v2?Message Edited by Edward-Nardella on 2-26-200602:08 PM

  • Avidemux audio sync problem with MPEG-2 - alt. way to cut mpeg-2

    I have a PVR-250 and when I load up an MPEG-2 file that it generated in Avdimux, the audio/video is out of sync (before I make any edits).  My goal is simply to cut out commercials in the file, nothing else. When I play it in any other viewer (vlc, mplayer, etc.) the sync is perfect.  I found that this is known issue with Avidemux.  See below.
    Can you guys recommend another piece of software I can use to simply cut parts out of mpeg-2 files?
    Taken from mythtv wiki page.  I quoted the relevant text from it here:
    Cory Papenfuss noted:
    I would just like to add again that this procedure only works 95% of the time for broadcast/cable captures... about 80% of the time for tape transfers. Avidemux cannot deal with chaining A/V sync throughout the file, and this method will have broken sync with one of these unfortunate captures. The author of avidemux acknowledges this limitation, but says a fair bit of internal work would be needed to fix it.

    Thanks, I suppose I can start batch-converting my mjpg movies before importing them inte PE7, if that would make this problem disappear. I'll try that (I have FormatFactory installed, but VirtualDub seems like a nice tool if that is better), although that would make the process a bit more long-winded...
    Regarding GSPOT info on a file that works and one doesn't, there are typically no difference between them (except length and content, of course). In fact, as I mentioned above, the same movie did not work until I did some reinstalling, clearing caches etc. Then the same movie suddenly worked OK again.
    I attach the GSPOT info on that file.
    (I never had this problem on my older XP system that run PE2...).
    I will try converting to see if the problem disappears.
    Thanks!
    // G

Maybe you are looking for