Sync Single SWF in Sidebar to Multiple Slides AND Upload to Connect Pro

Thank you for reading this. I have a three 18-20 min SWF
movies of presenters who are talking to between 19-30 slides each.
I see it's been suggested that there is no easy way to do this,
BUT, that one can locate the reference XML file; and then cut and
paste the video link; and then adjust each in and out time. Phew!
Has anyone done this with success? Are there any other tricks
or pointers? Any software that forwards Time Markers to SWF and
presenter?
I then need to post these Presenter files onto a Connect Pro
Account. Will the time spent adjusting the XML file be worth it OR
should I make up and import up to 90 small SWFs one for each slide?
OR Are there any other strategies? Thanks for your ideas!

No problem - post the page so we can see what you did wrong.
Once you post the page url it will only take a few minutes to
figure out the problem. It's impossible to figure out without more
to go on...

Similar Messages

I could not sync my new phone contacts with my laptop, and when i connect my phone with my laptop it delet my new contects, plz guide me?

i could not sync my new phone contacts with my laptop, and when i connect my phone with my laptop it delet my new contects, plz guide me?

Reinstall iTunes. I had the same problem.

Presenter 7: Can you Import a single WAV with Markers over multiple slides?

Adobe Presenter 7.0.1.
The import audio allows you to import a WAV format file. You should be able to use Markers in the WAV file and the Import will split the single WAV file at those markers to fit with the individual slides.
That was certainly the case in earlier versions according to some of the Forum posts, and the dialog box for Audio Import hints that it can be done because it says:
"Select the starting slide for the import..."
Ignore Markers? (check box)
So the title, select the starting slide suggests that the import can be over more than one slide, and the Ignore Markers check box suggests that markers might be used somehow.
But it doesn't! This would be great if it did. Has anyone got this working?
What I have to do now is split the audio file up into individual files, one for each slide, and name them 01, 02, 03 and so on. Then the import can be pointed to all the files and it puts one file on each slide for you.
Any help getting this working gratefully received.
Colin Davis

I have upgraded to 7.0.2 but the result is the same, the audio is imported all onto a single slide.
Can I ask what audio application you are using to save the WAV file? I am using Adobe Soundbooth and in that the markers are called "Flash Cue Points" (the menu is Edit, Marker, Flash Cue Point). I am wondering if these are traditional WAV markers or something different.
My file definately has 11 of these markers and I have 12 slides in my PowerPoint. Whilst importing the audio I am selecting the first slide and "Ignore Markers" is definately not checked.
Regards
Colin Davis

HT1212 ipad disabled it syncs sand starts download for update but stops and says network connection timed out. its not 3g cant use find iphone

trying to unlock sons disabled ipad mini cant use find iphone not 3g and wont connect internet when disabled syncs to itunes whenusing never synced method
asks if i want to update and restore download starts and then message syas network connection timed out. any ideas on another method i can update after unlocked and restore all his stuff from icloud

Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer

Sync all photo's- iOS Windows multiple devices and locations

I have multiple folders, locations, devices that have photo's including many duplicates. What is the easiest way to sync all devices, get rid of all duplicates? I am using icloud,ipad2,5S and Windows professional. In a perfect world, once I get all organized, using iCloud, all devices will sync with each other and won't have this mess or photo's stored all over the place. Thanks in advance. AlanCBMC

Maybe, although I always thought there was a threshold for each device below which it wouldn't have to create an "optimized" (re-sized) version. You'd think this would be a high number for the New iPad, giving the screen resolution. For example, my re-sized (3072 on the long edge) pictures aren't being optimized before tranfer -- they're just copying over and they work just fine.
Who knows. I just got off the phone with a tier-2 AppleCare rep (I found this thread while we were on the phone), and he indicated he would pass this thread along to the engineers. It's a pretty obvious bug somewhere in the mix, and one I suspect they'll be all over right away, given the attractiveness of the new iPad to photography types.

How to use aggregator to create a single swf file from multiple files

Hi everyone,
I am working on the client's requirement where i have to create a SCROM 2004 based video. Its basically a PPT inside the captivate file. And it has around 175 slides in the file. Some of the slides have animations, voiceover. I am facing a problem during PUBLISHING the file into single SWF file format. Whenever I Publish the slides as SWF, it creates number of SWF files, Swf skin of the player and other manifest, Scorm 2004 files.
I want only one single SWF file in which every slide should be incorporated in it. Dont know, why it is happening? I tried aggregator for this also, but it didnt worked... The Skin.swf has been easily added and no other files are adding. It shows me an error: "Name.swf is not a AS3 Captivate file ....."
I am new to this. Please help me out as I have a very short deadline for this.
Thanks and Regards

Maybe you misunderstand: this is a user forum, not online help by Adobe staff.
Sorry, but if you are that impatient, you'll have to pay for online support. You post a question and expect to have answers within minutes?
Lilybiri

CSOM code in C # to download and upload multiple files from/to sharepoint library

Hi All,
Please help me I want to first download all my files from sharepoint library to my local folder using CSOM code .
Once downloading is completed I want to upload those files in another library .
I have done same thing using web services but need to do by CSOM now.
Thanks please provide code of peice
sudhanshu sharma Do good and cast it into river :)

By using below code I am downloading multiple documents and uploading same doc to sharepoint while uploading i want to updat emetadata of source library to destination library ..
I am able to do so but want to do now for dateandTime+metadata column as well please can you check my approach and let me know tht how to do for such kind of columns-
FileProperty.cs
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
namespace ST_9569f2fe51bd4137bb31c38b3d46455d
class FileProperty
public string Title; //single line of text
public string Description; //Multiple line of text
public string DocumentType; //choice type
public string DocumentCategory; //Choice type
public string DocumentNumber; //Single line of text
// public string DocumentStatus; //Choice
public string DocumentTitle; //single line of text
// public string CrossReference; //Multipleline type
//public DateTime PublishDate; //DateAndTime Type column
/// <summary>
/// Get the SP Document Column internal name and thier respective values
/// in key -value pair.
/// </summary>
/// <returns>The List of KeyValuePair</returns>
public List<KeyValuePair<string, string>> getColumnKeyValueListProducts()
{//Target Columns
List<KeyValuePair<string, string>> columnKeyValuePairList = new List<KeyValuePair<string, string>>();
columnKeyValuePairList.Add(new KeyValuePair<string, string>("Title", Title));
columnKeyValuePairList.Add(new KeyValuePair<string, string>("Description0", Description));
columnKeyValuePairList.Add(new KeyValuePair<string, string>("Document_x0020_Type", DocumentType));
columnKeyValuePairList.Add(new KeyValuePair<string, string>("Document_x0020_Category", DocumentCategory));
columnKeyValuePairList.Add(new KeyValuePair<string, string>("Document_x0020_Number", DocumentNumber));
//columnKeyValuePairList.Add(new KeyValuePair<string, string>("Document_x0020_Status", DocumentStatus));
columnKeyValuePairList.Add(new KeyValuePair<string, string>("Document_x0020_Title", DocumentTitle));
//columnKeyValuePairList.Add(new KeyValuePair<string, string>("Cross%5Fx0020%5FReference", CrossReference));
// columnKeyValuePairList.Add(new KeyValuePair<string, string>("Publish_x0020_Date", PublishDate));
return columnKeyValuePairList;
/* public List<KeyValuePair<string, DateTime>> getColumnKeyValueListProductsforDatenTime()
//Target Columns
List<KeyValuePair<string, DateTime>> columnKeyValuePairListdt = new List<KeyValuePair<string, DateTime>>();
columnKeyValuePairListdt.Add(new KeyValuePair<string, DateTime>("Publish_x0020_Date", PublishDate));
return columnKeyValuePairListdt;
#region Help: Introduction to the script task
/* The Script Task allows you to perform virtually any operation that can be accomplished in
* a .Net application within the context of an Integration Services control flow.
* Expand the other regions which have "Help" prefixes for examples of specific ways to use
* Integration Services features within this script task. */
#endregion
#region Namespaces
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
using Microsoft.SharePoint.Client;
using System.IO;
using System.Net;
using System.Collections.Generic;
//using System.IO;
#endregion
namespace ST_9569f2fe51bd4137bb31c38b3d46455d
/// <summary>
/// ScriptMain is the entry point class of the script. Do not change the name, attributes,
/// or parent of this class.
/// </summary>
[Microsoft.SqlServer.Dts.Tasks.ScriptTask.SSISScriptTaskEntryPointAttribute]
public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
#region Help: Using Integration Services variables and parameters in a script
/* To use a variable in this script, first ensure that the variable has been added to
* either the list contained in the ReadOnlyVariables property or the list contained in
* the ReadWriteVariables property of this script task, according to whether or not your
* code needs to write to the variable. To add the variable, save this script, close this instance of
* Visual Studio, and update the ReadOnlyVariables and
* ReadWriteVariables properties in the Script Transformation Editor window.
* To use a parameter in this script, follow the same steps. Parameters are always read-only.
* Example of reading from a variable:
* DateTime startTime = (DateTime) Dts.Variables["System::StartTime"].Value;
* Example of writing to a variable:
* Dts.Variables["User::myStringVariable"].Value = "new value";
* Example of reading from a package parameter:
* int batchId = (int) Dts.Variables["$Package::batchId"].Value;
* Example of reading from a project parameter:
* int batchId = (int) Dts.Variables["$Project::batchId"].Value;
* Example of reading from a sensitive project parameter:
* int batchId = (int) Dts.Variables["$Project::batchId"].GetSensitiveValue();
#endregion
#region Help: Firing Integration Services events from a script
/* This script task can fire events for logging purposes.
* Example of firing an error event:
* Dts.Events.FireError(18, "Process Values", "Bad value", "", 0);
* Example of firing an information event:
* Dts.Events.FireInformation(3, "Process Values", "Processing has started", "", 0, ref fireAgain)
* Example of firing a warning event:
* Dts.Events.FireWarning(14, "Process Values", "No values received for input", "", 0);
#endregion
#region Help: Using Integration Services connection managers in a script
/* Some types of connection managers can be used in this script task. See the topic
* "Working with Connection Managers Programatically" for details.
* Example of using an ADO.Net connection manager:
* object rawConnection = Dts.Connections["Sales DB"].AcquireConnection(Dts.Transaction);
* SqlConnection myADONETConnection = (SqlConnection)rawConnection;
* //Use the connection in some code here, then release the connection
* Dts.Connections["Sales DB"].ReleaseConnection(rawConnection);
* Example of using a File connection manager
* object rawConnection = Dts.Connections["Prices.zip"].AcquireConnection(Dts.Transaction);
* string filePath = (string)rawConnection;
* //Use the connection in some code here, then release the connection
* Dts.Connections["Prices.zip"].ReleaseConnection(rawConnection);
#endregion
/// <summary>
/// This method is called when this script task executes in the control flow.
/// Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
/// To open Help, press F1.
/// </summary>
public void Main()
// TODO: Add your code here
//Unpublished lib used to download files from sharepoint to local and Published library for uploading files from local to sharepoint
//var srcFolderUrl = "http://ui3dats011x:2015/sites/techunits/UnPublished%20Doc/Forms/AllItems.aspx";
//var destFolderUrl = "http://ui3dats011x:2015/sites/techunits/Published%20Documents/Forms/AllItems.aspx";
using (var ctx = new ClientContext("http://ui3dats011x:2015/sites/techunits/"))
try
List LibraryName = ctx.Web.Lists.GetByTitle("Unpublished Doc");
List LibraryName1 = ctx.Web.Lists.GetByTitle("Published Documents");
ctx.Load(LibraryName1.RootFolder);
ctx.Load(LibraryName);
ctx.ExecuteQuery();
CamlQuery camlQuery = new CamlQuery();
//Used this caml query for filtering
camlQuery.ViewXml = @"<View><Query><Where><Eq><FieldRef Name='Document_x0020_Type'/><Value Type='Choice'>Technical Unit</Value></Eq></Where></Query></View>";
Microsoft.SharePoint.Client.ListItemCollection listItems = LibraryName.GetItems(camlQuery);
ctx.Load<Microsoft.SharePoint.Client.ListItemCollection>(listItems);
ctx.ExecuteQuery();
string filename;
FileInformation fileInfo;
System.IO.FileStream outputStream;
Dictionary<string, string> itemmetadata = new Dictionary<string, string>();
foreach (var item in listItems)
if (itemmetadata.Count > 0)
itemmetadata.Clear();
ctx.Load(item);
ctx.ExecuteQuery();
ctx.Load(item.File);
ctx.ExecuteQuery();
filename = item.File.Name;
foreach (KeyValuePair<string, object> metaval in item.FieldValues.)
string metavalue = Convert.ToString(metaval.Value);
//if(String.IsNullOrEmpty(metaval.Value.ToString()))
if (!(String.IsNullOrEmpty(metavalue)))
itemmetadata.Add(metaval.Key, metaval.Value.ToString());
else
itemmetadata.Add(metaval.Key, "");
fileInfo = Microsoft.SharePoint.Client.File.OpenBinaryDirect(ctx, item.File.ServerRelativeUrl.ToString());
outputStream = new FileStream(@"C:\Users\jainruc\Desktop\Sudhanshu\ComDownload\" + filename, FileMode.Create, FileAccess.Write);
fileInfo.Stream.CopyTo(outputStream);
outputStream.Dispose();
outputStream.Close();
//Uploading
string srcpath = @"C:\Users\jainruc\Desktop\Sudhanshu\ComDownload\";
string siteName = @"http://ui3dats011x:2015/sites/techunits/";
string docLibraryName = @"http://ui3dats011x:2015/sites/techunits/Published%20Documents/Forms/AllItems.aspx";
UploadFile(srcpath, siteName, docLibraryName, itemmetadata,filename);
}//End of try
catch (Exception ex)
Dts.TaskResult = (int)ScriptResults.Success;
public void UploadFile(string srcpath, string siteName, string docLibraryName,Dictionary<string,string> metavalue,string filename)
using (ClientContext ctx = new ClientContext("http://ui3dats011x:2015/sites/techunits/"))
try
List LibraryName1 = ctx.Web.Lists.GetByTitle("Published Documents");
ctx.Load(LibraryName1.RootFolder);
ctx.Load(LibraryName1);
ctx.ExecuteQuery();
ctx.Credentials = new NetworkCredential("jainfgfgh", "Pashg8878", "mydomain");
//Loop for getting all files one by one
using (var fs = new FileStream(String.Concat(srcpath,"/",filename), FileMode.OpenOrCreate))
string fileUrl = String.Format("{0}/{1}", LibraryName1.RootFolder.ServerRelativeUrl, filename);
Microsoft.SharePoint.Client.File.SaveBinaryDirect(ctx, fileUrl, fs, true);
UpdateMetadata(fileUrl,ctx,metavalue);
//End of looping
}//End of try block
catch (Exception ex)
}//End of Using
}//End of function
public void UpdateMetadata(string uploadedfileurl,ClientContext ctx,Dictionary<string,string> mvalue)
Microsoft.SharePoint.Client.File uploadedfile = ctx.Web.GetFileByServerRelativeUrl(uploadedfileurl);
//create an object of the class holding all the properties of the document
ctx.Load(uploadedfile);
ctx.ExecuteQuery();
FileProperty fileProperty = new FileProperty();
fileProperty.Description = mvalue["Description0"];
fileProperty.Title = mvalue["Title"];
fileProperty.DocumentType = mvalue["Document_x0020_Type"];
fileProperty.DocumentCategory = mvalue["DocumentCategory"];
fileProperty.DocumentNumber = mvalue["DocumentNumber"];
fileProperty.DocumentTitle = mvalue["DocumentTitle"];
//fileProperty.PublishDate = Convert.ToDateTime(mvalue["PublishDate"]);
// fileProperty.DocumentStatus = mvalue["DocumentStatus"];
List<KeyValuePair<string, string>> columnKeyValueList;
//create a list of item need to be updated or added to sharepoint library
List<FileProperty> propertyList = new List<FileProperty>();
propertyList.Add(fileProperty);
columnKeyValueList = fileProperty.getColumnKeyValueListProducts();
ListItem item = uploadedfile.ListItemAllFields;
foreach (KeyValuePair<string, string> metadataitem in columnKeyValueList)
item[metadataitem.Key.ToString()] = metadataitem.Value.ToString();
//item["Title"] = uploadedfile.Title;
item.Update();
ctx.Load(item);
ctx.ExecuteQuery();
#region ScriptResults declaration
/// <summary>
/// This enum provides a convenient shorthand within the scope of this class for setting the
/// result of the script.
/// This code was generated automatically.
/// </summary>
enum ScriptResults
Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
#endregion
sudhanshu sharma Do good and cast it into river :)

Help with used iPod I just got - syncing and uploading a LOT of CD's

Hello All:
So I just brought a used iPOD on Ebay, and i'm totally new to using them. I believe it's the 6th generation classic, 80GB, black. I have two questions.
1) I get the message in itunes that only one library can be synced, do I want to erase the ipod and upload the library thats on my laptop. I assume this is some kind of copyright thing, and that theres no way to save the songs that are on the iPod to the laptop, since they were loaded onto the iPod by the previous owner?
2) I have about fifty CD's here I want to load onto the iPod. In my mind, i'm thinking I want to backup the iPod with all 50 CD's onto an external USB hard drive. I don't really want 80GB of data on the laptop internal hard drive that I use all the time. I poked around with iTunes for about a half-hour, and I can't see how to load CD's onto the iPod without loading the CD's onto the laptop internal hard drive and then syncing the iPod to load the CD's onto it. Forgive my ignorance, but is it possible to load CD's directly from the laptop CD-ROM drive to the iPod without going onto the laptop internal har drive first, and/or can I use iTunes on the laptop with an external USB hard drive and/or then go from the external hard drive to the iPod or from the iPod first to the external hard drive to backup the iPod?
THANK YOU,
Lee Bernhang

I FIGURED IT OUT!!!!
what i did was plugged my iPod back up, then when iTunes pops up, drag your 'music' section to your iPod. (you have to be in your library, not in the iTunes store)
mine synched automatically, and i had no problem ejecting it or anything.
no error messages either. and all my music is now on my iPod!
thanks to my dad. (: lol. hope this helps someone!

Want a single .swf like before

I just want a single .swf like I iused to be able to publish
out of v1 of captivate. Is there a way to do that?

Hi again qptress
Captivate 3 brings quite a wealth of new features to the
plate. You have already mentioned grouping. But there are others,
such as;
* Ability to randomize, copy, paste, import, export question
slides
* Two new question types
* Ability now to automatically size text buttons
* New object type called a "Slidelet", that allows
presentation of a Caption AND an Image on the same mouseover
* New mode of recording audio narration - You may now watch
the slide or project play while you narrate
* New "Multiple mode recording". You may now record a single
time and create both a Demonstration and a Simulation based off the
single recording.
There is more. I'm just hitting the high points.
As for the full motion bits, it certainly sounds like you
launched Captivate, selected the "Full Motion Recording" mode and
recorded your project. Certainly, when you do this you will end up
with multiple .SWF files to distribute.
Cheers... Rick

Best way to control audio over multiple slides-iMovie or QT Pro?

I have a 30-slide presentation, and due to the horrendous handling of audio files by Keynote I need figure out the least painful way of controlling audio spanning multiple slides.
My end goal is to have a Quicktime file to put on the web, and to burn to a CD or DVD for viewing on individual computers. There is audio spanning 3 slides (a Garageband mix with voiceover narration built in,)and different audio for background for different groups of slides.
Least painful method to attempt this and get ACCURATE TIMING for the end product?

Make a series of Keynote presentations, one for each complete audio track. Export each as a QuickTime DV (digital video) clip. Launch iMovie and import the clips into a single iMovie project; tweak each clip's audio, as necessary. Finally, export the assembled iMovie to your intended QuickTime format.

Best way to change the quality of multiple slides

Captivate v5.5
I have a project with multiple slides.
Not sure how but some have a quality set to "Low (8-bit)" and others to "High (24-bit)"
I want all slides to have the same (high) quality and wonder what is the most efficient way to change them all to the same ?
Also - what is the difference (in quality) between "Optimised" and "High (24-bit)" ?
Noel

Not so sure, but normally Optimized will adapt as needed more than just putting it to High.
You can select all the slides in the Filmstrip, and then change the quality in the Properties panel, where common properties for all slides will remain accessible.
Or you can just override the slide quality on publishing by unchecking 'Retain Slide Quality' in the Preferences, Project, SWF Size and Quality.
Lilybiri

Not able to publish project as a single swf File

Hello Captivate experts.
I have a problem publishing only one swf file with Captivate.
My project consists of three slides. The first one is a introduction Slide, the second and the third one only contain one swf each (swf that i also created with captivate).
These files are the files who always get published together with the main .swf. So after publishing I got three swfs instead of only one
I know that a topic like this has been discussed, especially because of the new feature of Captivate 4 wich allows to export only one file, but so far i haven't read anything about swf files that can not be included. (I only found that flash video can not be inserted into a single swf).
I realized that this problem only occurs with swf files created with captivate. Swf files created with Flash don't result in a septerated file.
Did anybody have this problem before? Does anyone know a workaround?
Thanks in advance
captiware

HI Captiware,
When you insert a swf, which was created from Captivate, as animation into Captivate and publish => the swfs are kept external. This is by design.
Manish
http://blogs.adobe.com/captivate

Audio over multiple slides in Captivate 5

I am new to using Captivate 5 and i'm trying to record audio in Captivate that will play while 3 slides advance on their own.
I read something on a past thread that talked about clicking a "slide divider" - I can't find the "slide divider" and about a "distribution window" opening after I record the audio - that never appears.
Can anyone help me with this? It seems like it should be easy to find.
Thanks
Emily

Hi Emily,
You can record audio to 3 slides in different ways.
Option1 :
You can record audio individually on all the three slides by invoking the Slide audio dialog for every slide.
1. On every slide you wish to record audio invoke the slide audio dialog ( from Audio >> Record to >> Slide ) and record for the single slide. Saving the recorded audio will add it to the slide you recorded.
2. You can follow step 1 for all the three slides you wish to record.
Option 2:
You can record audio to all the three slides continuously in one go. You can do this in the SLIDES audio dialog
For ex if you want to record audio for slides 1,2 and 3, then select slide 1 and invoke the slides audio dialog from Audio >> Record to >> Slides
You get a "Record from Slide" dialog. Enter the Slide numbers for which you wish to record audio and click ok.
This will open the slides audio dialog.
Slides audio dialog shows up the slides selected in the "Record from slide" dialog. Enable "Continuous play" and "SWF Preview" and Click on the recording button. This will record audio over the three slides as you narrate. Audio will be added to all the three slides. You can see the Movie (SWF) preview or the Slide number mentioned in the top right of the preview pane to know the slide number you are recording to.
If some portions of the audio spills over the next slide then you can arrange the markers in the EDIT tab. Here you can play the audio and pause at the point where you want your next slide to start and click on the button highlighted by Lilybiri. Its called the "Start Next slide here" button.
After all the recording is done click on SAVE to add audio to all the three slides.
Try out these and let me know if it works.
-Ashwin Bharghav B

Presenter output ONE single SWF

Hi,
I'm having a lot of trouble figuring out how to do the
following. What I'm looking for is to export a PPT presentation
that is heavy on animation that includes audio. For this the
presenter plug-in works very well. Compared to captivate's import
features and recording system, I prefer the presenter system in
terms of ease of use for the author.
The one BIG problem I have is that I must have the final file
output be a single SWF file, because that is what our technology
teams can handle. They can't do zips, exes, or full directories
with js, xml, htm and separate flash files. So my questions are two
fold:
1. Has anyone been able to convert the whole zip package into
a swf package easily.
2. If not, does anyone know of a consulting resource that can
create/modify the output of presenter to that effect

I, too, am trying to figure this one out.
I'm in charge of streamlining our web seminar archiving
process, and one of the major problems is that we use an operator
assisted service for the audio. Because the audio never passes
through Adobe Connect, it isn't recorded. Currently, a person has
to set up a completely new meeting after the initial meeting and
sync the audio from the operator service by hand (using up 2
computers for the whole hour meeting!).
Coming from an audio/video background, I'm trying to
understand why there isn't an option to:
a) get the original media files from the Connect admin to
sync the audio and re-upload
b) import an audio file into the recording from the original
meeting on the Connect server
c) export the synchronized presentation with Presenter as a
single Flash movie, or something similarly useful
Any help we could get would be greatly appreciated!

Export single swf

When using full motion or when importing swfs into the
cp-file I've come across a problem. Captivate can't generate a
single swf output file. For each imported swf Captivate will
generate a copy of these files and in some way link from the main
file to these files. This is a problem as I would like to use the
main file for input to Articulate.
Is there a solution to this problem? Is it possible to embed
the imported media files in the main swf?

Welcome to our community, Gustaf
Actually Captivate is capable of creating single .SWF output
if you know how to finagle it.
All credit for what I'm about to offer here goes to fellow
Adobe Community Expert and fellow Adobe Certified Instructor John
Daigle for figuring this out!
Publish your project to a temporary folder. When you publish,
make sure you target Flash 7. (If you choose Flash 8 or Flash 9,
this process will likely fail)
Now, back in the Captivate editor, insert a Blank slide
either just before or just after each Full Motion clip. Adjust the
timing for these slides to match the timing of their matching
neighbor.
On each blank slide, click Insert > Animation... and point
at the matching full motion .SWF in the temporary folder.
Delete the Full Motion slide that was there originally.
After you have replaced them all, Publish the project again.
Hopefully this helps... Rick

Sync Single SWF in Sidebar to Multiple Slides AND Upload to Connect Pro

Similar Messages

Maybe you are looking for