Sync sound problem

http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=628&threadid =1375660&enterthread=y

I would try deleting the detached audio and unmuting(turning volume to 100%) all the video clips after the  detached one starts.

Similar Messages

  • Help Overcoming Sync Sound Problems

    I have some video footage that a client has handed over where the sync sound shot on location is, shall we say, less than optimal. It is interview footage of Doctors in Emergency Rooms and was shot on location in empty ER treatment rooms. It is very echo-y/hollow and has a lot of background voices from out in the hall of the ER.
    Though I would like to minimize the background voices, I can live with them. The real issue I need to some advice on is how to minimize the hollow/echo sound from shooting in an empty sheetrock/linoleum room? The levels are excellent and the voices are crystal clear.
    I am true novice at Soundtrack Pro (and sound in general) and would really appreciate some advice on how to make the voice track "richer".
    Quad G5, Dual G5, Dual G4   Mac OS X (10.4.4)  

    I can't walk you though it step by step (*maybe somebody else can). But here are some things to look at:
    Echoes in a particular room, especially without significan movement of the mic, fall at ver specific frequencies. They can be greatly reduced with careful use of extremely narrow parametric equalizations.
    The following is non-FCP specific but you'll figure it out. The short story: you want to set up a parametric EQ with a narrow band and with the gain pumped up.
    Now sweep the frequency up from the bottom until the sound gets really boomy and annoying. You just found one of those frequencies. Center the frequency where it sounds the lousiest.
    Now turn the gain all the way down. The sound should be much better. Tweak the bandwidth and the gain until the most objectionable echo is taken out without affecting the desired audio too badly. This is subjective.
    You're not done yet. Repeat this process with another parametric EQ, sweeping up friom the frequency of the first one. Repeat all the above. And so on until you've got a handle on it. Most of the nasty echos will be in the boomy bass area.
    If you're really finicky, you may now find yourself going back and raising the gain on some of these to get back some of the audio quality. Echo isn't all bad, but there is definitely such a thing as too much.
    I guess I do go step by step... darn, I don't have time for that!

  • Animation - Lip Sync sound problems

    Hey guys. I used to have Macromedia Flash 8 but I've now got
    Adobe Flash CS3. I am trying to make a speaking animated person in
    flash and for this, I wish to change the framerate to 24FPS for
    high quality, and then import the sound to timeline and for each
    individual frame, change the facial and mouth expressions. For
    this, I would like to, when clicking on a frame of the sound to
    animate, just the sound for that one frame to play so I know what
    expression to add.
    I used to be able to do this in the old version fo Flash and
    I hope that you can help me with this.
    Thankyou,
    Ryan

    I can't walk you though it step by step (*maybe somebody else can). But here are some things to look at:
    Echoes in a particular room, especially without significan movement of the mic, fall at ver specific frequencies. They can be greatly reduced with careful use of extremely narrow parametric equalizations.
    The following is non-FCP specific but you'll figure it out. The short story: you want to set up a parametric EQ with a narrow band and with the gain pumped up.
    Now sweep the frequency up from the bottom until the sound gets really boomy and annoying. You just found one of those frequencies. Center the frequency where it sounds the lousiest.
    Now turn the gain all the way down. The sound should be much better. Tweak the bandwidth and the gain until the most objectionable echo is taken out without affecting the desired audio too badly. This is subjective.
    You're not done yet. Repeat this process with another parametric EQ, sweeping up friom the frequency of the first one. Repeat all the above. And so on until you've got a handle on it. Most of the nasty echos will be in the boomy bass area.
    If you're really finicky, you may now find yourself going back and raising the gain on some of these to get back some of the audio quality. Echo isn't all bad, but there is definitely such a thing as too much.
    I guess I do go step by step... darn, I don't have time for that!

  • New iTunes 6.02 AND new QuickTIme 7.04 Video Sound Problems

    Hi, I had updated my iTunes for Windows 6.01 and Quick Time 7.03 to the newest versions. The new software both yield the same issue for me. They will not play videos with sound properly. When I am on Quick Time and click to play a *.mov that I have had way before iTunes or iPod, and any other playable movies in Quick Time, the video starts, there is no sound for a few seconds and then this clicking sound starts. For instance if I had a movie that is abour 20 seconds long, it will never get the synced sound with it. Let's say the first sentence would be Hi, how are you today-----------------it sounds like this: Huh-huh-huh-huh-huh-huh-huh-huh-huh-huh-huh-how-how-how-how-how-how-how-how-how -how-how-how-how-how-how-er-er-er-er-er-er-er-er-er-er-er-er-er-er-er-er-er-er-e r-u-u-u-u-u-uu--u-u-u-u-u-u-u-u-u-u-u-u-u-u-u-u-u-u-u-u-u--u-u-u. I think you get the point. If this is a video with just sound and no spoken word in the video, it also sounds chopy, clicky, and vibrating like that and over the course of 20 seconds plays this out like this, when is should be the correct maybe 3 second part.
    This also is the same exact thing that happens in the new iTunes. Exactly. Whether it is downloaded from the iTunes Store or imported in, or even converted with the new convert to iPod option.
    The only good thing is when I put the 4 new movies on my iPod that I had converted form *.mov format with the new convert to iPod option, they play just fine on the the iPod which has the software version 1.0 software on it, not the newest firmware. But as I said nothing plays correctly soundwise from videos from the iTunes Software.
    I tried uninstalling both new versions and reinstalling them with the same problem. I therefore uninstalled them again and installed iTunes 6.01 back on my computer and thus QuickTime 7.03 and there are no problems at all with either older version of iTunes or QuickTime.
    Please advise. It this a diagnosed problem as of yet???

    Consult this article
    http://docs.info.apple.com/article.html?artnum=93610h
    This is a User to User forum by the way. Apple does not really come in here.

  • Sync Sound, Easy Answer Come on guys

    Wow Can;t Belive I am asking this one,
    I am syncing sound from a dat recorder to dv captured footage. For the life of me I cannot create independant subclips.
    Our original capture was not broken down into takes, so we have sub clipped all of the clips from what we have logged. Now I try to link the sound to the video in the timeline and it is creating a new SEQUENCE and not an independant clip, when I click create subclip. Surely it should be easier than that
    All we want is to link the media (already created subclips with aiff audio) and create new independant files.
    Please help
    Thanks
    Aaron
    Please reply to [email protected]

    What iPod do y have? If a Nano then post in the Nano forum. This is the iPod touch forum. If tyo have an iPod touch then:
    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?
    or if a Mac
    iOS: Device not recognized in iTunes for Mac OS X

  • IPhone 5 iOS 6.1.2 sounds problems, how solve it?, iPhone 5 iOS 6.1.2 sounds problems, how solve it?

    The instalation of iOS 6.1.2 make troubles in sound sistem of my iPhone 5 - no specker working.
    To times restoring and no solutions. Please help me, thanks.

    Since upgrading to iOS 6.1.2, I, too, have been having sound problems, but with my earbuds, with one side or the other being either full of static, or only faint sound.  It is inconsistent, and does not always happen.  Also, some songs in various playlists skip randomly, and others cannot be played when selected.  This never happened before this release, and I use the iPod function of my iPhone 4s every day.
    Also, the first time I downloaded an app, the iTunes store recognized my iPhone as a NEW DEVICE downloading an app for the first time, though I have had it since October, synced it many times, and have downloaded many apps.  When I looked at my iTunes Store profile, my purchasing history was empty, even though I have purchased several apps this month.
    iTunes Support says this (the download part) SOMETIMES happens after an update.  I asked them if it happens sometimes or every time, since it has never happened to me before.  No reply.  They did not address the skipping issue, either.
    Anyone else with similar issues?

  • Sound Problems Playing Video's in iTunes

    When i play videos (either ripped or bought from the iTunes store) in iTunes the sound is all broken up and clipped. However they play fine on the Vieo iPod my PC is sync'd to and, critically, iTunes audio files play fine on both PC and iPod. Any ideas? Settings for sound seem fine. I've even upgraded the memory on my Vaio to 1Gbyte in case it was that but nope

    Should have said if I start quicktime seperately from iTunes and play a video stream from its website the sound is fine, however, if I open an Mpeg4 iTunes video file the sound problem occurs just like when i play a video in iTunes from the store or an Mpeg4 file from the hard drive that I've bought from the store or ripped from DVD

  • HOW DO I FIX SOUND PROBLEMS ON MY IPOD  TOUCH?

    How do i fix sound problems on my ipod touch?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • IMovie 6 transition sound problem - transposed soundtracks? Any solution?

    Hello,
         I can see that this problem has been discussed many times, and I am getting by using some of the suggested "work-arounds", but I was just wondering if there have been any actual solutions to this problem?  I never had this problem before, and I don't exactly know when it started, but it is VERY ANNOYING!  I have iMovie6 and a 2.4 GHz iMac with an Intel Core 2 Duo.  I am still using Leapard, OS version 10.5.8 simply because it seems to work fine, and I haven't needed any of the newer features.  However, if this transition issue would be corrected with an upgrade, I would gladly upgrade!  Has anyone found a solution for this transition sound problem?
    Thanks,
    Lincoln

    Lincoln
    Like you I find this very annoying .
    For me "extracting audio" sometimes results in the audio becomming out of sync with the video, also doing the "update" mentioned above does not fix it for me; I must be doing something wrong?
    Having opened iMovie 6 to try "update " fix and failed I started to try a few things.I think I have found a solution that works.
    The following sounds complicated, but is not; reading twice is recommended
    Most of us apply a string of transitions from left to right i.e. between clip 1 and 2 then between 2 and 3 then 3 and 4 and so on. The audio glitch will occur in say transition 2/3 because there is a transition immediately before it in 1/2 and likewise a glitch in 3/4 because of the transition immediately before in 2/3 .
    I find you do not get a transition audio glitch between 2 clips if there is no transition immediately before.
    So the simple solution is having sorted all your clips and edited, apply the transitions in reverse direction i.e. from the end of the movie working towards the beginning; transition between clip 39/40 then 38/39, 37/38 and so on down to 2/1.
    If you do not want to start at clip 40 for some reason you can say do (assuming you want all clips to have transitions) clips 5 down to 1, then say 15 down to 10, then say 10 down to 5 etc etc.  But you will notice that when you do clip 5/6 in this scenario you already have a transition for 4/5 so you will get an audio glitch for 5/6.
    The solution here before doing transition 5/6 is to split video at playhead  somewhere in clip 5 so that there is a break in the transitions but no interuption in the video.
    If you are able to apply transitions in one session then working backwards from the end  is the easiest solution and takes no longer than any other method.
    If you have to do it in segments still work backwards but spit clip at playhead as above when approaching an already applied transition in order to create a "transition  break".
    Alternatively a quick and dirty way might be to split every clip in 2  before applying transitions and apply the transitions anywhere except at the splits.This way you should not have to worry what order or direction you apply them in.
    If you try this let me know how you get on.

  • Re-syncing sound

    We have nearly finished an edit but have noticed not all the audio is there, this has meant re-inputing some audio from the flash cards but this has become so tiring that we have decided to completely re-sync the sound from scratch.
    How can we tell Final Cut Pro to use the new re-synced sound on the clips that we have edited and all the fade points and levels etc? Or, are we going to have to completely re-build the edit from scratch?
    Someone please help before I start to re-sync the sound and find out that it was a waste of time as it will take me two weeks to do it!
    Thank you all in advance!
    Richyboy.

    Hi Jerry,
    We are working in DV with sound recorded separately onto flash cards which we have on DVD's.
    The problem is we started editing with what we thought was the complete sound, so have pretty much finished it, however, we have looked back and have found all the merged clips in a bin that the assistant editor did. In short, we've edited with the wrong files.
    Because however, the assistant editor has not synced the sound up well, im gonna do it again anyway. What I am concerned about is there a way that I can reassemble the edit, without having to go through it all manually, i.e. is there a way of using an EDL, paste attributes etc?
    Know it sounds complicated, but we need to find a process by which we can keep the edit we are happy with, but bring in the new sound.
    Cheers for your help.
    Rich.

  • K7N2-ILSR sound problem

    Hello ,
    I'm havinig random weird sound problems :
    when i play video after a long time the sound gets laggy/grating/out of sync .if i  pause the film and start again it fix the problem . also sometimes after playing for several minutes i get noise/hiss added to the sound.
    this happens randomly and after playing for a while. i'm using win xp ,nforce 2.45 drivers and the sstorm control panel.
    what causes the noises?
    my system :
     K7N2- ILSR
     AMD XP 2500
     twinmos 2X256 PC3200
     HITACHI 120GB
     GAINWARD GF4 TI4200
     

    I have the exact same problems you mentioned but I am using a old nForce 1 msi board.  K7N420-Pro to be precise.  
    Usually it runs pretty well in games and such, but when ever I try to play winamp it gets very very buggy.  sometimes I can't even get through 5 seconds of a song, other times it will get through 2 or 3 and then mess up until I hit next.  I upgraded to the 2.45 yesterday from the 2.11 drivers and still got the problems.
    I don't think its a heating problem since it has seen far worse heat in this computers past (winter term right next to the wall heater in the dorm) then where it is now in a 72 degree room.  
    Any help would be appreciated.  
    Velmeran

  • I have sound problem in My Cq40-144TU Laptop

    Hi,
    I have Cq40-144tu laptop. i am't hearing sound from internal speaker but sound is hearing from headphone. I have configured my system many time. Last got to shop and they also format it and reconfigured but still this problem is showing. 
    But I was hearing sound from speaker when i chat in gtalk and then i heared sound from window media player and other application also for 5 to 10 second only. every time some text is recieved i hear sound for 5 to 10 second.
    please tell me what is problem in My Laptop. i have window 7 ultimate operating system.
    Please help me sir

    What sound problem - no sound on anything, no sound on some apps ?
    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
    And for future info typing in all capitals is considered to be SHOUTING

  • Desperately need some help!! iTunes/Quicktime/iChat/Sound problems....

    So, yesterday, I was online, on google video, and when I pressed play on the video, there was no sound, but the video worked...the same was true on every video site i checked. My computer volume was at max, and I even tested the speakers to make sure they were on, and they indeed were.
    I thought that was odd...but then the problems really started.....
    After that, I clicked on my iChat icon. It bounced once, and did not open. The same thing happened when I clicked on iTunes. 1 bounce, and then nothing. I checked to make sure all of my iTunes mp3 files were on my computer....they indeed are all still here, bit nothing I can do opens iTunes. I've run disc utilities, and disc repair...according to that, everything is peachy-keen on my computer.....but iChat and iTunes STILL will not open, and there is still no sound on anything.
    Now, i'm leaning towards the archive and install option....or even just backing up what I want to save, wiping the drive, and starting from scratch.....but i'd really like to not have that happen.
    (and, as a side question, if all I want to save are images, several documents, and many mp3 files, would everything be okay if I just backed them up on an external drive, and then loaded them back on to my computer after reinstalling OS X?)
    Sorry about the length of this, but I am at my wit's end, and I have no idea what to do.

    by third-party, do you mean things I installed that are not manufactured by mac? If that is the case, I have microsoft office, Smart Music, Flip4mac, and Senuti.
    I got rid of Flip4Mac to see if that affected my sound problems, but it did not. So, as of now, my problem remains the same...

  • HT3983 i have a sound problem when i install windows 7 32 bit on my imac

    i have a sound problem when i install windows 7 32 bit on my imac

    Did you download and install the Windows Support software? First step in Bootcamp Assistant is to download the support software. Then did you install the support software from within Windows?
    Read the Bootcamp Install instructions. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

  • Sound problems on ProBook 6550b, running on Win 7 Pro x32bit..

    I have been getting very similar sound problems on my notebook as posted by most: internal speakers work on original Audio HD drivers, but there is no sound when I connect external speakers or headphones. I up-graded the audio drivers to IDT HD Audio and I get sound coming from external speakers or headphones, but nothing from internal speakers.
    I have tried everything from reporting the problem on public forums, live help, and done this or that, but nothing changes. It's so very clear to me that it has to do with audio drivers, which don't seem to work appropriately to cover all aspects of sound output.
    I also, often, get this loud, weird, irritating noise and a frozen PC when I am playing music with the notebook, while on the internet. The best I do is not to do both at the same time. I have seen similar problems on blogs, but tangible solutions are NOT offered!!!! Please help...

    Audio Switching coudl be due to several reason. if you have tried latest audio drivers and latest Video drivers from hp.com, i suggest you to get audio board replaced for your computer.
    Hope it helps.
    Regards,
    Waseem,
    I work for HP.
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Regards,
    WW
    “I am an HP Employee“
    ***** Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

Maybe you are looking for