Sync stops part way "unable to process all items"

Suddenly my synchronisation on my phone as stopped working.
It stops at Sending data... 19 of 314. Says "Data transfer not possible, check data connection". Then says "Calendar: Incomplete. Unable to process all items"
The sync log says: "PC Sync has encountered a problem and has terminated the synchronisation" and "The Synchronisation was aborted by the user". (this last bit surprises me as this isn't the case!).
Phone: 6233
Nokia PC Suite: 6.81.13.0
Syncing over bluetooth connection.
I have tried:
- switching phone on and off
- closing PC Suite and re-starting
- running a repair on PC Suite
- restarting bluetooth software
No joy. Very annoying. I seem to remember having this problem a few months ago (perhaps with my old phone, but can't remember how I resolved it).
Any ideas?
Ian
PS this is a repost as the last one had bad formatting!

Doing it each day
Interestingly, it did it again this morning. I recreated the settings and it works again. However, I really don't want to have to recreate the settings everyday!
Does anyone have a long term solution?
Interestinly, when I re-ran it, it seems to pause at the 19th item (the one it was getting stuck on) but then carry on. Could there be something wrong with some of the entries in my phone?
Ian

Similar Messages

  • HT1583 sound stops part way through on burned idvd, but ok on computer edit.

    Can anyone help, for the first time having a problem with a burned idvd which the sound stops part way through. If sound turned right up on TV muffled sound
    is there. Edited on computer and all works fine with full sound right the way through, only trouble is on the disc. Have tried many discs, so does not appear to
    be disc failure.
    Appreciate any comments please

    Hi
    FIRST OF ALL - THE MAJOR ADVICE in this forum EVER !
    In iDVD - Before Burning the DVD DO !
    Save as a DiskImage
    Double click on this .img icon
    test the new Pseudo DVD (looks like a white hard disk) with DVD-tool
    THEN
    • DVD Brand - matters
    • DVD type used - matters
    • BURN SPEED - matters
    • Audio file format - matters
    WHAT did You use
    I only use
    - Verbatim
    - DVD-R SL
    - x2 max x4 - Best / High - IS NOT BEST
    - .aiff - NO .mp3, .wma etc alient formats - from iTune EXPORTED OUT as .aiff ONLY
    Yours Bengt W

  • I've just downloaded Sophos (yesterday) and commenced the scan. It keeps stopping part way through, the 2nd time when it was about 98% completed after 4 hours!!!! I've had to start again. What could be causing this? I have Mountain Lion.

    I've just downloaded Sophos (yesterday) and commenced the scan. It keeps stopping part way through, the 2nd time when it was about 98% completed after 4 hours!!!! I've had to start again. What could be causing this? I have Mountain Lion.

    Thomas A Reed wrote:
    You will be advised by people here that Sophos is "junk" and should be removed {...} Sophos actually works pretty well, in my testing, and so I would suspect that there may be an underlying problem with your file system that needs to be repaired.
    FWIW, I have used Sophos regularly for several years now (including on my new iMac running Mountain Lion versions 10.8.2 & now 10.8.3) & never had any problems with it on any of the half dozen or so Macs I have installed it on.
    Quite a few people automatically assume all Mac A-V software is troublesome junk, & many will leap to the conclusion it is the cause of some problem without considering other potential (& often much more likely) causes, regardless of which A-V product is installed.
    Obviously I hope, not all A-V products are alike, so it doesn't make a lot of sense to me to condemn them all because of problems with one of them. Regarding Sophos in particular, finding first hand reports of it causing problems is quite difficult -- typically, if you ask for the details it turns out to be a second or third hand report & there isn't enough info available to know for certain if it is the real cause or not.
    This is not to say it is impossible for it to cause problems, just that it is prudent to consider all the possibilities before concluding that any one of them is the cause.

  • Captivate 8 - Animated text stops part way through play

    I have created a presentation with CAP8 and am finding the animated text does not play out in full, but stops part way through.
    eg. animation to type [email protected] and then on a new line same text box [email protected]
    slide preview it runs perfectly. In the preview next five slides and in publication it runs  all of [email protected] and then freezes after typing johnbe
    It actually stops the video it seems, as i can hit play to resume, which will then type out the rr, and will complete the email on a third time hitting play.
    I get the same thing on the next slide with two of the three text animations that are running simultaneously, and again on the next slide. I want to point out that this is not just on one slide.
    I have changed settings on the properties from " rest of slide" to "Duration of animation", and there is no change. I have lengthened the slide timing just in case that makes a difference, even though I am using Shape buttons to progress to the next slide. No change.
    Any suggestions please?
    Thank you
    Claire

    Yes here are a couple of screen shots. I am sorry it doesnt show an exact time but with simulation it is at about the 2.5 second mark for the first stop
    first error screen
    second scrren with the error

  • In Photoshop Elements 12, is there a way to batch process all photos in a file with 'Auto Tone' and save the changes?

    In Photoshop Elements 12, is there a way to batch process all photos in a file with 'Auto Tone' and save the changes?

    Thank you, that was perfect!
    Yoni

  • Swf stops part way through in browser

    my swf stops part way through when in the browser always at
    the same frame...in flash it plays fine...here's a link to the web
    page...
    http://www.karlyoder.com/wiredchemi...r_symmetry.html
    and here's a link to the fla (it was too big to attach)...
    http://www.karlyoder.com/wiredchemi...r_symmetry3.fla
    also, when right-clicked it says movie not loaded...

    Hi,
    Try following the steps below and check if that may help:
    - Open the HP software by clicking the HP Envy 5530 icon within the Desktop or the Start Menu, then click the Printer Home Page (EWS) link.
    - Click the Network tab.
    - Depending on your printer model click on Networking and then on Network Address (IP) or click on IPv4 within the active network connection type.
    - Click on Manual IP , and then click Suggest a Manual IP Address . A manual IP address, Subnet Mask, and Default Gateway displays.
    *Be sure to take a note of the IP address and Confirm the changes, then close the EWS page.
    - Click the HP Envy 5530 icon within the Desktop or the Start Menu and click the Utilities tab, then click on Update IP Address.
    - Type the manually configured IP address, click on Save and confirm.
    - Open the control panel and go to Devices and Printers.
    - Right click the HP Envy 5530 icon and select Printer Properties.
    - Open the Ports tab.
    - Click the Add Port button, select Standard TCP/IP and click on New Port.
    - Follow the steps by typing the manually configured IP address and confirm the changes.
    Now try printing and check if the issue been resolved.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • When i watch something on you tube or any video, it stops part way through

    when i watch something on you tube or any video, it stops part way through the screening and i cannot get it to continue. it is so frustrating!

    Go to this link to download the installer and this link to determine which version you have installed. Always get extensions like this from the publisher (in this case Adobe) and not from some website that says you need an extension and offers to install it for you since you may end up with malware instead.
    BTW, once the current version of Flash is installed, you can set its preferences to update automatically in the background.

  • I'm in the process of updating my iPhone4 to IOS. The installation has stopped half way in the process. And it has ben like that for almost two hours. Now what do I do?

    I'm in the process of updating my iPhone4 to IOS6. The installation has stopped half way in the process. And it has ben like that for almost two hours. Now what do I do?

    Hello scrapperdw,
    Thank thank you for using Apple Support Communities. 
    The following article provides steps and troubleshooting when the install process has stopped.
    iOS: Apple logo with progress bar after updating or restoring from backup
    Regards,
    Jeff D. 

  • I down loaded a rental movie and stopped part way through . i turned the computer on and off and when i went back on itunes it didnt show up on the rental playlist and movie playlist.how can i get the movie back?

    i down loaded a rental movie and stopped part way through . i turned the computer on and off and when i went back on itunes it didnt show up on the rental playlist and movie playlist.how can i get the movie back?

    Unless it has recently changed you can only watch rentals on the device or mac you rent them on.

  • Enable 'process all items' option in shopping cart display/edit screen

    Hi All,
    'Process all items' option is disable in the shopping cart view/edit screen. How can I enable the said option ?
    It there any authorization object or attribute needed for enable 'process all items' option ?
    For your information, this botton is appear next to Delete option in shopping cart item level.
    Thanks,
    Regards,
    Jennifer

    Hi,
    if you want to enable or disable any option or field in SRM portal find the web component of the field by right clicking on it, Then enhance the web component and in the post exit of WDModify_view add the code for enabling or disabling the field.
    Which will definetly work.
    Regards,
    Goutam Kolluru.

  • I am unable to update my iPhone from ios4 to ios7, I know you have to do this via the computer however the backing up process stops part way through and it is unable to carry on

    I have ios4 on my iPhone 4 and I have tried to update it to ios7 and to do this I know you have do use the computer. however part of the way through, the back up process stops and nothing else happens

    I would suggest that you tru and update through iTunes on your computer. Also, could you connect your computer up to the internet using a wired connection rather than wireless - this will be faster and more reliable, particularly when you need to download a large file.
    Then try your update. This time, in iTunes, why not try to get it to download the sofware first (Download Only). You can then appy it to your iPhone later, once it has downloaded.

  • Unable to print full length 24" x 132" from adobe. Stops part way.

    I am trying to print an adobe document of a CAD drawing 24" by 132" with the 1050c plus.  The plotter prints about three-quarters of the way, stops printing, then rolls out the rest of the page.  I've tried all that I think of in the print settings of adobe (i.e. paper source - roll, roll size - 24 inch, under more sizes - entered size, set memory both printer and computer, quality - fast). The only thing that seems to help is the fast quality setting, where I get a bit more of my plot, but not all of it.
    If you have any suggestions of what else I can try please let me know.  Any help is much appreciated.

    Hi,
    Check for the print mode in the print options and set it as 3- print and archive .
    Regards,
    Ram

  • Hi, I am prompted to download the latest  Tunes software (10.7) but after starting the process is stopped and the massage says "Errors occured while installing, if the problem persists choose Tools download only) This process also stops part way through

    Hi, I am prompted to download the latest I Tunes software (10.7) (I have done this sucessfully for other versions many times before)
    The process starts but stops quite quickly.A message pops up "Errors have occured while installing updates, if the problem persists choose Tools>Download Only and install manually" When I try this it still fails but another message pops up "Invalid signature, the download has been removed"
    Not very sharp on computers so any help would be appreciated.
    Regards

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • Import stops part way thru

    trying to import from my canon zr85 camcorder, and when I hit import, the preview creen on computer is runing in slow motion, AND the import stops a few minuets into the import. Have started over & over & it stops at random points on the tape.
    Last week I sucessfully imported 10 hours of tape (from another camera). I am using firewire connection. Any thoughts, am I missing something?
    Mike

    I'm getting similar behavior using my Canon Elura 90. iMovie allows the tape to play all the way to the end, but at seemingly random points it just stops importing what is playing. One thing that I have noticed is that if +anything at all+ (screensaver, iCal alarm, etc) comes up on the screen in front of iMovie, the import will always quit at that point. But it also seems to quit at random points even if nothing comes up. It's already taken me several hours to import my 1-hour Christmas tape, and I'm not half done yet, because I've got better things to do on Christmas day than sit and babysit the import. (I can't do anything else on the computer meanwhile because that will of course stop the import.)

  • New Media Sync dies part way through transfer

    I took the update to MediaSync since I was looking for the new iTunes cover art feature.  I did a normal sync and all my unprotected music made it to the BlackBerry.  I then checked to import all the iTunes cover and then started the sync again.  This time it died with a Windows pop-up window on the 1081th file.  Thinking it might have been a bad file (or related to the file) I removed that file from iTunes and tried again.  Failed on 1081 again.  One more time removing a file and it still failed on 1081.  Put the two file back and thought I would see if others are having a similar issue.
    Anyone?
    Eric

    I'm getting the same type of error.  I have tried multiple times to import the iTunes album art and each time I get to file 588/1110 and the application crashes.  I am using Windows Vista and the problem details that I am getting are:
    Description:Stopped workingProblem signature:Problem Event Name: CLR20r3
    Problem Signature 01: blackberry music sync.exe
    Problem Signature 02: 1.1.0.24
    Problem Signature 03: 49411411
    Problem Signature 04: System
    Problem Signature 05: 2.0.0.0
    Problem Signature 06: 47577deb
    Problem Signature 07: 575
    Problem Signature 08: 1d
    Problem Signature 09: N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
    OS Version: 6.0.6001.2.1.0.768.3
    Locale ID: 1033
    Any suggestions?

Maybe you are looking for