Sync windows vista 64 bit with tungsten E

I have an old Tungsten E which I need to sync to a new laptop. The new laptop has vista 64 bit. Palm says vista only supports blue-tooth and my old tungsten does not have that technology or I can't seem to find it. I only see connections to phones. Anyone have a solution to this?
I fried my old laptop and need to add the contacts and calendar to my new system.
Would appreciate any help with this.
Post relates to: Tungsten E

cjhruska, you're in the same "boat" as the Z22 folks. Your only hope is to sync via IrDA (Infra-red, aka "Beaming" )
This thread explains things:
http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=36872&jump=true
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Sync Windows Vista Calendar with PC Suite & N95

Is anyone aware of a way to sync my N95's calendar with the new (and improved) Windows Calendar which comes free with Vista?
I'm using PC Suite 6.83.14.1 and this can only sync with Windows Vista Contacts (not calendar).
Thanks!

11-Mar-2007
01:58 PM
doom4 wrote:
Hi
I have a problem with compatibility of nokia pc suite , it doesnt work on Windows Vista , and i have to install some apps to my phone through usb cabel because i havent bluetooth card in my pc ( Is it any version for Windows Vista ? I didnt find it on czech nokia official web sites Message Edited by doom4 on 11-Mar-2007
01:59 PM
What version of Vista do you have? 32bit or 64bit? I have a 32bit Vista Ultimate and PC Suite works fine.
Nokia N73 v 4.0735.3.0.2 RM 133

Windows Vista Home ( with SP2) constantly reporting that Safari 5.1.2 has crashed ( usual Windows prompt to close program) yet Safari is still running although loading pages slowly. Any one seen this recently ( note no recent install or changes to Windows

Windows Vista Home ( with SP2) constantly reporting that Safari 5.1.2 has crashed ( usual Windows prompt to close program) yet Safari is still running although loading pages slowly. Any one seen this recently ( note no recent install or changes to Windows

Windows reports that Safari stopped working . Windows Task Manager shows webkit2webprocess.exe process still running even after I respond to Windows prompt and close Safari ( Safari continues running after this action )

Does anybody know to authorize a windows vista computer with the new itunes?

does anybody know to authorize a windows vista computer with the new itunes?

Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

Will Windows Vista work with Bootcamp 3.0.4 (325)?

Will Windows Vista work with Bootcamp 3.0.4 (325)? the documentation says that I need a Win 7 installation disc. I don't want windows 7; I want Windows Vista.
How do I install the drivers?

You don't provide any info regarding your computer but Vista is not supported by the newer Apple computers: http://support.apple.com/kb/HT4410
You could use a VM like Parallels, Fusion, or VirtualBox to install Vista.

Hot Sync problems with Windows Vista using a Tungsten E2

Need Help solving a hot sync problem. Have a Tungsten E2, about a year old. Use Windows Vista OS. Can not sync to desktop. It worked fine for awhile then stopped sync'ing. Have reinstalled Palm Software, Have downloaded Palm 6.2. Have deleted all 3rd party apps,,,and their back up files. Particulary,,,,Epocrates apps, Took over my PDA. Installations and updates gets to synchronizing Calender and 'freezes' have left it on overnight figurng lots of data,,,,no progress. I need help. I really enjoy using this equipment. I use my PDA for all my scheduling of work shifts appts etc. I would appreciate some suggestions. Thanks in advance. Mike.
Post relates to: Tungsten E2

Hi.. Welcome to the Palm forums. So if I am understanding you when you try to sync it goes to calendar and freezes and never completes the sync. That being the case the first thing you want to do is go to the conduits and turn off calendar then sync and all should be successful, except calendar will not sync. What this indicates is that you have corrupted data in your calendar, most likely on the E2. Do a google search on your computer for a utility 'dbfixit' and download it to your computer. Extract it so you have the dbfixit.prc file and double click on it to put it in the installer. Then, insuring the calendar conduit is off, sync to install it. Once installed run dbfixit. This utility is free or can be purchased for (I believe) 12.95. The free version will search for corruption and problems let you know where they are and you will have to manually fix or delete them. If you register it, when you run the utility it will find the errors and fix them as well. Once all errors are fixed, turn the calendar conduit back on and you should be able to sync.

Cannot do wifi sync after update IOS 6 using windows vista pc with itunes 10.7

I cannot do the wifi sync,I am using IPAD 3 with IOS 6.I heard people said to do synchronous wireless.It would work I using Windows Vista,then I using Itunes 10.7.Somebody can help me to solve these problem or give me feedback to solve these problem.

Like many others, most of the the workarounds I tried worked but for awhile only and/or not reliably. After more googling and trial and error, I finally ended up with a somewhat reliable solution using the below 2 changes. (I am running up-to-date Win7 with an Ipad2 and an Iphone5 both on ios 6 + and up-to-date Itunes software on the PC).
1) Disable IPv6 on the wireless adapter (see CKNairb's earlier post)
2) Create a bat file which stops and starts the "Apple Mobile Device" service, then starts Itunes
The bat file can be placed in any dir and a desktop shortcut created to point to it in order to easily start Itunes (right-clicking properties of the shortcut and clicking "Change Icon" will even allow the selection of the Itunes icon to make it look just right :-) )
The bat file should contain these lines:
net stop "Apple Mobile Device"
net start "Apple Mobile Device"
"C:\Program Files (x86)\iTunes\iTunes.exe"
Edit accordingly as to whether your Itunes.exe resides in \Program (x86) or \Program.
By starting Itunes using this shortcut/bat file, you will ensure that the Mobile Device service is up and running when Itunes attempts to locate the devices wirelessly - this seems to be the key issue here.
Although it is not 100% reliable, I would say that both devices are detected and synced 90% of the time. (Itunes will always find one of the 2 devices).
Anyways, based on all I have gone through to get this work, I am willing to settle for "almost reliable" solution - hopefully this may work for others as well.
Happy syncing!

Installed CS3 with windows vista bit AE won't open.

When my old faithful computer motherboard fried, I had to get a new computer with Windows Vista Home Premium.
I had CS3 loaded and working without a glich on my old XP computer.
I've loaded the whole CS3 suite, but when I open After Effects nothing happens. Using Window's Task Manager, under "Applications" After Effects doesn't show up as a running but under "Processes" the file "AfterFX.exe *32" is listed as running.
I've also tried uninstalling CS3 and reinstalling it in the directory "Program Files" rather than in the directory "Program Files (x86)" and nothing changed.
I've tried to opening all the other programs in CS3 with the similar results. Nothing opens, but their .exe files are listed under Task Managers "Processes".
I'm using this as a vol lic product, so I'm not sure how much tech support I can get.
Thank you for any help you can give me.

I'm sorry it didn't work. I probably don't have an answer for you since I'm not an expert or anything.
One thing I thought was weird was that the software version on my computer for the motherboard was version 6.xx (whatever) and the software I downloaded from the HP web was version 5.xx (whatever). It made it work though..
I think the update would be on the HP site, not the MSI site. Go to hp.com, downloads, and put in the name of your computer. Download/install whatever motherboard software they have. If that doesn't work, go to the adobe website and search for the document kb402213 and work through that. It's what the person you give Adobe $40 to help you is going to do.
Good luck. Hopefully this helps.

Some calendar entries do not sync: Windows Vista -- Outlook 2007 -- 3GS

I have a couple of calender entries that refuse to sync. beween my Windows Vista machine running Outlook 2007 and my iPhone 3GS.
I bought some airline tickets from USAir and they sent reservation information in an e-mail that I added to outlook. Although the "appointment" looks normal in Outlook it will not sync. I also have one event on the iPhone that won't sync "back" to Outlook.
So far I have tried:
* Reseting the sync. history in iTunes
* Setting the "Replace information on this iPhone" for the Calendar setion.
* Making an edit in the non-syncing entries so they would show as needing to be synced to the other device.
None of these things has made the entries sync....
Any ideas apprecaited....

Ok after MUCH messing around it appeared that the problem was somewhere in one of my "repeating events". Myself and the Apple guy concluded this after exporting all of my calendar events to a CSV file and then re-importing them. All the events went to the iPhone without issue so the initial diagnosis was data corruption in one of these events causing a sync. failure.
I was willing to go along with this diagnosis and figure out which event was corrupt since that seemed to be the problem.
MY ONLY COMPLAINT to Apple at the time was that this condition should have given an error message during sync. - just a "basic" QA check of the sync. would show the number of calender events in Outlook did not match the number of calender events in the iPhone ... apparently this is NOT performed by the iTunes Sync. tool.
Anyway I deleted ALL recurring events from my calender sync-ed and all was well.
I started adding back the repeating events to find the "broken" event. This turned out not to be possible as it would "break" in seemingly random places.
For example I have about 60 annually repeating events (birthdays and anniv.) I added back the first 20 ... it broke. Ah-ha the problem is somewhere in #1 - 20 of 60. So I add just the "last" 40 ... it still breaks... hmmmmmm do I have MULTIPLE "break points"???
Ok ... so I just start re-adding them manually one at a time ....
I have a grandfather that was born in 8/28/1915. When I add his birthday to the calendar in Outlook (by entering his birthdate on the details page of his contact record in Outlook) a annually repeating event that repeats forevery starting on 8/28/1915 gets added to the calender. iTunes would NOT sync. this event.
I deleted it, re-resync-ed, then re-added the birthday and EDITED it to start the repeating event on 8/28/2000. This time a sync. worked OK and the birthday is on my iPhone ... this is very screwy. Again no error messages from iTunes at any time.
So I do not know what the "metrics" are for valid events, but if something as simple as the one above confuses iTunes I sure could have a lot of "bad" events that are in fact not corrupt.
So I do not know what the "metrics" are for valid events, but if something as simple as the one above confuses iTunes I sure could have a lot of "bad" events that are in fact not corrupt. There has got to be something weird going on with the way iTunes handles "repeating" events in terms of a "ceiling" as to how many times it can repeat or the total number of repeating events that can be sync-ed or something like that ... that seems to be the only "thread" I can find .... it does not appear to be corrupt data, but perhaps event types that the iTunes/iPhone can not handle???
Not a happy boy.

Can't install quicktime or itunes I recieve error code 2738. I'm running windows Vista 32 with Service Pack 2. I have tried old and new version of both programs. Also, have gone through Apple's online help with no good outcome

Can't install quicktimeor uninstall it for that matter and itunes I receive error code 2738 with both downloads. I'm running Window Vista with Service Pack 2. I have check for all window update. I have gone through Apple itune help list. Even going into cmd to do regsvr32 vbscript.dll which was successfull. Can you help...my son had to register his ipod at the neighbors house..What going on.
Son even call apple with no help and was give Microsoft number no help there either they wanted me to call HP.....run around

Excellent news!
Strange how sometimes the fixit works better than the manual methods, and sometimes the manual methods work better than the fixit. It differs from Microsoft fixit to Microsoft fixit too. (Unfortunately, because these "anomalous 2738s" are pretty rare as install errors go, I don't have a good feel yet for whether or not it's the fixit or the manual method that's more likely to work in iTunes/QuickTime installation contexts.)
Afraid I'm not very good on earbud troubleshooting, but fingers crossed the folks over at the iPod communities might be able to help:
https://discussions.apple.com/community/ipod

Windows Vista x64 with YouP-PAX XFI2007 Revision 2 Works quite w

Dear all X-FI members
I have an X-FI Xtreme Fidelity card and install with Windows Vista x64.
. I download the latest driver from Creative SB-XFI Version 2.3.002
2. I download the Media Source CMS5 Version 5.0.38
3. I install both of them
4. I download YouP-PAX XFI2007 Revesion 2 from the web filefont below:
http://files.filefront.com/YouP_PAX_X_FI2007_Rev2/;748043;/fileinfo.html
5. I extract to a folder. inside the folder there is an instruction as below:
Don't click on setup.exe but click on PAXsetup.exe. It gave an error.
6. I cancel and do it again by clicking on Audio(sub-folder) and then click on
setup(sub-folder)and then click on setup.exe. It gives me a table to select.
I uncheck driver box, and click next and go through the rest installation smoothly.
7. After restart computer. The MediaSourceGo pops up and display all features
8. I check THX console with gane mode and entertaiment mode. All works
9. On both Modes, all speakers 2., 4., 5. and 7. can be selected and have all sounds
0. X_FI CMSS-3D is enabled, X_FI Crystalizer is enabled, EQ and Mixer are worked.
. I do not play games so i do not know any thing about Alchemy and game stuffs
2. when you try to change the Speaker mode. You have to click on THX console to do
3. By the way, even the YouP-Pax revision was working well too. I don't see anything different from YouP-Pax X-FI2007 revision 2. They both work well for me.
4. Reminding that. When you install the applications. PleaseDon't click on setup.exe or Paxsetup.exe. But please click on Audio folder, and then setup folder. then you see the setup.exe, please go down and click on setup.exe and please uncheck the driver box and anything you don't want to be install then uncheck them. After that click on next and that is it. Restart computer.
With all the best to all of you.

Thank you for your post a reply RejZoR
I have come back and updtae the driver from YouP-Pax 2007 revision 2, and it was going through well. You are definitely right.
I hope that every one has all things worked well and be happy with what they have bought from creative
many thanks to those who has done a good contributions to the drivers and applications to make them work.

Weblogic Portal 10.3.2 for Windows 64 bit with OEPE

Our environment is Windows 64 bit and we are upgrading from Weblogic Portal 9.2 to 10.3.2.
I have installed Weblogic Portal for 64 bit using generic installer and have also installed OEPE Helios for 64 bit.
I am not getting Portal perspective in Eclipse?

These issues are why we dropped every Oracle products for our new projects. We only kept Oracle SGBD.
Working with Oracle products costs a lot, impose specific tools, impose specific environment (can't work with Windows 7/x64), doesn't integrate in standard toolchains (eclipse, maven, continuous integration, ...). More, you don't have any control on product evolutions and maintenance.
With this decision we saved a lot of money, a lot of time, quality, and community support is far more powerful than buyers think. Nothing is better than standards!
Sorry Oracle but I think you need to seriously rethink your commercial behavior and your relationship with J2EE developers.

Windows Vista Business with MBP - wireless not working

I have successfully installed Windows Vista on my MBP using Boot Camp Assistant.
Problem is that the wireless ethernet does not work. I have heard of some file called "Install Macintosh Drivers for Windows XP.exe". If this is what I'm suppose to use where do I find this file?

Hi and welcome to Discussions,
first thing to do after the Vista Installation is to insert the OSX DVD that came with your MBP while in Windows.
Apple provides the BootCamp Drivers on that DVD.
The Driver Setup should start automatically once the DVD is inserted.
Let the Driver install and do the neccessary reboot into Vista once it has finished.
Hope it helps
Stefan

Windows Vista conflicting with Clean Access?

When I try to log into Clean Access to use the internet, it gives me an error message saying that in order to fulfill all of my requirements and get into the system, I need to download windows defender. But Windows defender comes with Windows Vista, which is what I have...So when I try to download Windows Defender and install it, it gives me a popup saying that I already have it on my comnputer and that I don't need to download it. Any ideas? Anybody? Please? Am I even in the right place for this kind of question?

If you using Windows Vista,You already have windows defender. Ensure the version of the defender because if Windows Defender informed you that an update is available, you are running an older version.
Below are Windows Vista Supported Antispyware Product as of the latest release of the Cisco Clean Access software.
Product version - 1.x
AS Checks Supported
(Minimum Agent Version Needed) are:
Installation - (4.0.5.0)
Spyware Definition - (4.0.5.0)

How to share an usb-connected Windows Vista Printer with a Mac Mini

Hi,
I own a laptop Sony with Windows Vista (64) which has a printer connected via USB. I recently purchased a MAC MINI (middle model) and wanted to use my laptops printer for printing from my Mac mini. is this possible? thanks. Mx

Hey there Max,
If you can’t find the printer in the network browser, it may be easier to add the printer manually using the URL field, as shown in the article below.
Mac OS X: How to manually add a Windows shared printer - Apple Support
Ciao,
-Jason

Windows Vista: Bluescreen with iTunes

Installed iTunes 7.02 on Windows Vista (RTM) and wanted to import the XML library which I exported before on XP. result is a Windows Vista Blue screen. A
I also do get a blue screen when just importing a larger folder into the library (one or two folders works ok).
Any ideas how to get iTunes working under Windows Vista?
Toshiba Other OS

http://docs.info.apple.com/article.html?artnum=305042

Sync windows vista 64 bit with tungsten E

Similar Messages

Maybe you are looking for