Sync with both Mac os 10.4 AND Windows XP at the same time?

After much research AND much frustration with my Moto Q... I have decided on a Palm Centro (the prodical is returning home --- i used to use Palm all the time)
Here is my one question... I use Outlook on my computer at work (XP - office suite) and I can use Palm Desktop (or iCal) on my Mac at home (10.4)
Is it possible to setup the palm to sync with outlook at work and either iCal or Palm Desktop at home so that the same calendar, tasks, contacts, are on work comp, home comp and Centro at the same time? will i make something blow up? I am just trying to get prepped for when I am able to get the centro (8 days and counting).
If nothing else... I haven't been syncing to the Mac at home with the Moto Q and so I am really not 'out' anything... just wanted to know if it could be done?
anyone out there doing this?
Post relates to: Centro (Verizon)

yeah... i was thinking Cabled sync. I just want to be able to make changes at work on outlook, sync them with my centro, take my centro home, and sync it with my mac (using palm desktop OR iCal -- suggestions?!) and have the information the same in both places!
I am wondering if the centro, unlike my iPod, will allow me to sync in two places (not at the same time) and possibly even with different software (outlook and palm)
Thanks!
Post relates to: Centro (Verizon)

Similar Messages

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

HP Pavilion dv2000 headphones and speaker playing at the same time

Good Day HP
Sir/Ma'am,
I have a HP Pavilion dv2000 laptop that run in Windows 7 Professional 64bit. I have problem with this because my internal speaker and headphone playing at the same time. And i notice that when i go to sound setting my headphone is not detected but it is still playing together with the speaker and only the internal speaker is only appearing at sound setting. I try to install RealTek that is compatible to my o.s but not working. Do i need to downgrade it to Xp or Vista to solve this problem or there are some solution for this problem. Please help me i'm not technician to fix this problem.
And please forgive me for my bad english..
Here are the system properties of my laptop.
Windows 7 Professional Service Pack 1
Processor : Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz
Installed Memory (RAM) : 1.00 GB
System Type: 64-bit operating system

HP Pavilion dv2000 headphones and speaker playing at the same time
germanok wrote:
Good Day HP
Sir/Ma'am,
I have a HP Pavilion dv2000 laptop that run in Windows 7 Professional 64bit. I have problem with this because my internal speaker and headphone playing at the same time. And i notice that when i go to sound setting my headphone is not detected but it is still playing together with the speaker and only the internal speaker is only appearing at sound setting. I try to install RealTek that is compatible to my o.s but not working. Do i need to downgrade it to Xp or Vista to solve this problem or there are some solution for this problem. Please help me i'm not technician to fix this problem.
And please forgive me for my bad english..
Here are the system properties of my laptop.
Windows 7 Professional Service Pack 1
Processor : Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz
Installed Memory (RAM) : 1.00 GB
System Type: 64-bit operating system

HT1153 Can I sync my Apple Bluetooth keyboard with Mac G5 , iPhone5 and Apple TV at the same time ?

Can I sync my Apple Bluetooth keyboard with Mac G5 , iPhone5 and Apple TV at the same time ?

Thank's for the help, my only choice is to buy 2 more keyboards .
Too bad that there is no memory to recall different channels of Bluetooth.

I am using several Macs running Yosemite. I was recently "upgraded" to Xfinity's new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for

I am using several Macs running Yosemite. I was recently “upgraded” to Xfinity’s new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for the Ghz. However when I connect to the 5Ghz the Time capsule disappears from the Airport Utility and claims to be Not Found. Is there something I have done wrong or just a Yosemite Teething Problem

First restart your mac and try again.
It could be
that the router and the TC are interfering wirelessly with each other.
You can check this by pressing the option key while clicking on the wireless icon on your screen
Open Wireless Diagnostics
enter your user password
Press CMD 4 then Scan
You will see all the wireless channels being used in your location and you can check if they are on the same channel
Make the SSID for the TC simple like MyTC
Set 5Ghz to auto
Update the TC
Try again
Ted

Hi...I have a Macbook mid-2009 which has both Mac OS Mountain Lion and Windows 8.1 32-bit?Is there a way to install bootcamp on the windows side?

I have both Mac OS Mountain Lion and Windows 8.1 32-bit installed....The machine is Macbook Mid 2009...Whatever i do i can't install and use bootcamp on the Windows side.........Apple Support says it only supports Windows 64-bit which my machine cannot install.......and when i tried to install Bootcamp 4 it says it only supports Windows 7 .........Is there no way to install and use Bootcamp without buying another computer?

Boot Camp - Apple Support
Boot Camp- System requirements for Microsoft Windows operating systems

Getting Logic master to send to both 1-2 and 3-4 at the same time

I have an native Instruments Audio Kontrol 1 'sound card' that I'm running 2 different sets of M-Audio monitors off of. My question i, can I run the master output to both 1-2 and 3-4 at the same time so I can easily check mixes on both sets of speakers without changing every single tracks output?
Also, is this possible to do in iTunes also? I can find nothing in Logic (or anywhere) that will allow this and I initially thought my device was broken until I simply choose 3-4instead of 1-2.
thanks so much!

Pancenter wrote:
Sampleconstruct wrote:
In Logic you could just setup additional sends of your Audio tracks using the send knobs and send the signal to a Bus. Set the outputs of that Bus to 3-4 and you'll have your signal played through 1-2 as well as 3-4.
Also, if any of the audio tracks used sends (reverb on a bus..etc) those would also have to be sent to the same bus as the audio tracks.
panleft-
How about routing all the outputs that are currently on Output 1-2 to a bus first then:
Option 1: Switching that bus's output between outputs 1-2 and 3-4 (for A/B comparisons)
or
Option 2: Use the Send on that bus's output to another bus, route that second bus's output to 3-4 (so both busses are sending audio to both sets of speakers simultaneously).
As an alternative, the Mackie Big Knob is a great hardware solution for routing a signal to 3 sets of speakers, allowing you to switch among them with simple button presses.
-droo

My ipod has a black screen. I have tried to hold the sleep/off button and menu button at the same time with no luck. I connected to my computer and tried restore on itunes - still with a black screen a voice said "screen locked' code 542

My ipod has a black screen. I have tried to hold the sleep/off button and menu button at the same time with no luck. I connected to my computer and tried restore on itunes - still with a black screen a voice said "screen locked' code 542

Is the iPad charged? Plug it in with the charger/wall outlet for half an hour and try again to reboot by holding both the power and home buttons until the apple logo appears.

How can I verify credit of an itunes card that has already been redeemed? My Grandson and I both redeemed itune cards on our shared account about the same time. There isn't a credit balance after his purchase?

How can I verify credit for an itunes card that has already been redeemed? My Grandson and I both redeemed itune cards on our shared account about the same time. There isn't a credit balance after his purchase?

Have you checked the account's purchase history to see if anything could have used up the balance : See your purchase history in the iTunes Store - Apple Support ?
If there aren't any purchases then try logging out and back into the account (e.g. on your iPad tap on your id in Settings > Stores and then log back in) and see if a balance then shows on it. My account's balance shows at the top right of the store's page on my computer's iTunes, by clicking on my name towards the top right of the iTunes screen, and by logging in to view my account via the Store > View Account menu option. On my iPad devices it shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > Stores and it should show on the screen that you are taken to)

My iPhone 4s will not sync a changed playlist from itunes unless i turn off music match. Shouldn't I be able to use a playlist and music match at the same time?

my iPhone 4s will not sync a changed playlist from itunes unless i turn off music match. Shouldn't I be able to use a playlist and music match at the same time?

It's not entirely impossible actually as someone has pointed out to me that I can turn on Call Forwarding and that stops any incoming calls. I've just forwarded it to my google voice number and then turned on "do not disturb" in google voice and whenever I get a call it goes straight to my google voice voicemail and my phone does nothing. The only thing now is I still get text messages but I think the phone calls bugged me more because they would make my music turn off for much longer.
Even though this isn't a perfect solution it's something so far so maybe you shouldn't just come out and say there's NOTHING I can do because so far I've found part of a solution. If you don't have anyting productive to say then just don't reply and close the tab. Thanks.
At this point I'm wondering if anyone knows of any Jailbreak tweaks that can enable what I want. Unless of course it's agaisnt the rules of this forum to mention jailbreak stuff...

HT201338 adaptor that accepts both VGA and ethernet cables at the same time that can be plugged into the Thunderbolt port

I have my Apple cinema display connected to my MacBook Air via the Thunderbolt port, but I also want to connect an ethernet cable.
Is there an adaptor that accepts both VGA and ethernet cables at the same time that can be plugged into the Thunderbolt port

I have my Apple cinema display connected to my MacBook Air via the Thunderbolt port, but I also want to connect an ethernet cable.
Is there an adaptor that accepts both VGA and ethernet cables at the same time that can be plugged into the Thunderbolt port

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple

If i have my mac mini and my mac air connected to my thunderbolt display at the same time how do I switch between each of them without unplugging one of them?

If i have my mac mini and my mac air connected to my thunderbolt display at the same time how do I switch between each of them without unplugging one of them? (By the way im mirroring my macbook air to my thunderbolt display not dual screening it)

That's not what home sharing is for or how it works.
You want the remote app.

HT1550 I'm having trouble with importing them into iTunes and converting them at the same time. when i hold down option over the files i can't find where its supposed to say create new version. is this if you're in iTunes?

I'm having trouble with importing them into iTunes and converting them at the same time. when i hold down option over the files i can't find where its supposed to say create new version. is this if you're in iTunes?

You can't do it in one step. Add to iTunes first, Once the tracks are in iTunes you may convert to a different format.
tt2

Problem connecting Firewire device and external HD at the same time

Hi. I'm attempting to record digital audio through a Presonus Firepod A/D interface via a Firewire 400 to 800 cable connected to one of the Firewire 800 ports on a mid-2010 Mac Pro running Snow Leopard.
The problem is that if I have an external HD connected to one of the other Firewire 800 ports on the computer and powered on at the same time, the connection to the Presonus Firewire device is not recognized by the Mac Pro. Not only that, performance of the Mac Pro is affected adversely and System Profiler is unable to list any Firewire devices. If I turn the external HD off, the Presonus device is recognized and listed in System Profiler and the machine runs fine. I'm able to connect two external hard drives via separate Firewire 800 ports on the Mac Pro and both drives mount w/ no problem. It's only when I try to connect one of the external HDs and the Presonus audio device at the same time that the problem occurs.
I used this same arrangement on a PowerMac G5 running Tiger w/ no problems whatsoever. If the 400 to 800 cable is bad, I would think it wouldn't work at all, but it does when only the Presonus Firepod is connected and powered on. Any ideas?

Have done more research and apparently this is not an uncommon problem: overloading the Firewire bus when connecting an audio device along with an additional device like an external hard drive. As I understand it now, audio signal is a bandwidth hog and the solution is to get a Firewire PCIe card which will have its own independent Firewire bus and which I'll use exclusively for my audio device.

Sync with both Mac os 10.4 AND Windows XP at the same time?

Similar Messages

Maybe you are looking for