Sync Work calendar to MobileMe but not my personal Calendar

I would like to sync my work calendar to my bosses MobileMe account and sync with her work calendar but not sync my personal calendar. Can I do this? I can log in to her account from System Prefs but I don't seem to be able to select which calendars to sync. Thanks.

Hi,
The short answer is: you cannot choose which calendars you want to sync with MobileMe.
Now, the longer answer: there might still be ways to achieve your goals other than syncing with MobileMe.
If you don't need to make changes to your boss' work calendar, and she doesn't need to make changes to yours, you should just publish your respective calendars, and subscribe to each other's calendar.
Otherwise, if you need to make changes to each other's calendar, you might want to look into the CalDAV support in iCal.
Hope this helps

Similar Messages

  • Event invites from Mail appearing in Calendar as "Maybe" but not showing in Calendar inbox

    Hello everyone,
    I'm actually new to using invites and Calendar on iPhone, so maybe it's something I'm missing.  But when I receive an invitation for an event that was created and sent from another iPhone using Calendar, I am not easily finding the option to "Accept" or "Deny".
    The calendar source is a CalDAV server, and all systems are functioning 100% as expected on that end.  The calendars are accessible and editable by any device, so I'm pretty sure the issue isn't here.
    I would expect the "mime-attachment.ics" received in the email to allow me to reply from that source, or to at least find the invite automatically listed in my Calendar "Inbox".  Neither is the case.  However, if I go and find the event in the calendar itself, it's sitting there with "hash" marks through the event until I go in and "Accept" or "Deny".  At this point, it shows up in my Calendar inbox under the "Replied" section.  So, it's definitely making it into my calendar.
    Should it not automatically show up in my Calendar inbox under the "New" section from the beginning?  Or what about being able to "Accept" or "Deny" straight through Mail?  Hopefully I'm not goofin' up here -- but I sure am stumped.
    Thanks for any help.
    ~Laz

    Eustace, sadly this did not work. It's a full week and I had to keep using Thunderbird to check that I'm not missing any mail. I don't get it, some comes in, some gets left out.
    Today I tired Eric Root's reindexing solution and that did not do anything either.
    I saw mail bringing in 188 messages and NOTHING new showed up. It did in T-bird because it was all the past week's mail
    Thunderbird *****. It doesn't even pay attention to rules I set up in it. I want my Apple mail back!
    Can I try to reinstall the mail app from my disks without having to delete the mail app entirely? Will the new files overwrite the old ones and 'freshen' it up (so to speak) and fix this communicaiton issue?

  • TS3999 I followed all of these instructions, but still iCloud Calendar will not sync to Outlook Calendar.  Calendar entries will sync from Outlook to iCloud, but not vice versa.  What do I do now?.

    I followed all of these instructions, but still iCloud Calendar will not sync to Outlook Calendar.  Calendar entries will sync from Outlook to iCloud, but not vice versa.  What do I do now?.

    When syncing Contacts or Calendars between an iPhone, iPad, or an iPod touch and Outlook 2003, Outlook 2007, or Outlook 2010, changes that you synced to your computer may not appear in Outlook even after the sync has been completed.Try this article to see if it works for you
    http://support.apple.com/kb/TS1944
    Hope this helps

  • How can I sync my iphone 4s calendar to my macbook pro without using cloud. I can sync from macbook to iphone but not visa versa.

    How can I sync my iphone 4s calendar to my macbook pro without using cloud. I can sync from macbook to iphone but not visa versa.  I have not upgraded to Lion so I am not using iCloud. I also have tried send an invite from the calendar so it will appear in my mac mail account. No luck on either.
    Thanks!

    Follow the steps given here...
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • I am wanting to print my iCal calendar, as use it for bookings but not include entries calendar from other people who I've synced with.

    I am wanting to print my iCal calendar, as use it for bookings but not include entries calendar from other people who I've synced with.

    GACU,
    OK, now I think I understand your problem.
    If it is your calendar that is being shared with other users who have been granted editing priviliges, you will not be able to exclude those events from printing.

  • My 5th gen nano will not sync win 7 .says connected but not show in itunes. driver is updated ,working properly ....help

    my 5th gen nano ,has updated driver ,working properly. ipod connected but not showing in itunes ?

    By the way, I totally restored everything. It was ok. It starts to 'unrecognize' my iPod Classic when it comes to synching with iPhoto. After this happened all the menus disappeared from my iPod (music, Podcasts, movies synched fine). It seems to be a problem when synching with iPhoto. It was the same thing before.

  • Why do Outlook calendar invites appear on my iPod touch calendar but not my icloud calendar

    Why do Outlook calendar invites appear on my iPod touch calendar but not my iCloud calendar? I use Outlook at work and if I want to add events to the calendar on my iPod Touch which I use as a PDA I simply create the event in outlook select my gmail email address and invite myself. The event appears on my iPod Touch...all well and good...now with the advent of iCloud I would like to see all events on my iPod calendar on the iCloud calendar that I view on my PC. At the moment only events that I have added directly onto the iPod calendar appear on the iCloud calendar.
    I have messed around abit syncing and unsyncing, Turning the Calendar on and off in the iCloud setting on the device but nothing is really working. Any easy to follow suggestions or is it a trip to the geniuses in order?

    Not sure why you'd want to alter an artist name anyway but...
    In iTunes, right-click selected track and click "Get Info" then edit the artist field and possibly the album artist too (edit as in... make sure they have a value (the correct artist name)). Delete the faulty track on your iPod and then re-upload the new one.
    Another thing is that if you left the music player open on your iPod when you add the new track, sometimes I find that it doesnt find any of the new songs you add until you close and then re-open the app on the iPod.

  • HT4968 Some  calendar entries appear on iMac "Calendar" but not on iPad3 "Calendar" Help

    Some  calendar entries appear on iMac "Calendar" but not on iPad3 "Calendar"
    Help

    This user tip might help you understand how accounts work with Address Book.

  • Classic - text ringtones work for one contact but not for others

    Just got the new Blackberry classic.  I'm having trouble with the ringtones for the text messages.  The custom ringtone works for one contact but not for the others.  I have taken the same custom ringtone that works for contact A and used it for contact B but it only works for A.  B sounds the default ringtone from the default profile instead of the custom ringtone.
    I have deleted all contacts and done a re-sync thinking something was corrupt.  That didn't work. 
    None of the contacts have a link. 
    I have changed the notification profile and it still doesn't work. 
    I have deleted a contact and recreated it manually.  It still doesn't work. 
    I finally deleted my dad's  contact and from the phone app created a new contact.  I set a custom ringtone for him and it worked.  I of course had to recreate all his other information manually.  Please tell me there is some other way to fix this than recreating manually all 147 contacts in my contact list.
    I read that if the phone number has the hypen or space it won't work, but my dad's contact info that I created from the phone app has the hypen and it rings with the custom ringtone.  Also contact A has no hypen in the phone number and it rings the custom ringtone.  So that didn't seem to matter. 
    I have spent hours on Google and see that lots of people have had this problem (but not everyone) but have not yet found a solution. 
    Surely someone has found a fix for this issue.

    Make sure that the contact has "Mobile" as the field for her number and not "iPhone".
    Note that the iPad cannot send SMS messages.

  • My calander and contacts are syncing on ipad and iphone but not my photos.

    my calander and contacts are syncing on ipad and iphone but not my photos.

    Make sure you are entering the contacts and calendar events on your iCloud account.  On your iPad, check Settings>Mail,Contacts,Calendars>Default Calendar.  Here make sure you have selected an iCloud calendar as your default, and not something else like On My iPad, Google Calendar, and exchange account calendar, etc.
    Then go to Settings>Mail,Contacts,Calendars>Default Account (in the contacts section) and make sure you have selected iCloud as your default.  (If you don't see this settings, this isn't the problem).
    If your settings for your calendar is correct on your iPad and it still won't sync new calendar events to your phone, go to icloud.com from your computer and enter any missing calendar events on your iPad that are not on your calendar on icloud.com.  Once your iCloud calendar is up to date, go to Settings>iCloud, turn Calendars to Off, choose Delete from My iPad when prompted, then after a minute or so turn Calendars back to On to sync your iCloud calendars back to your phone.  Then enter a new event on your iPad and confirm that it syncs to icloud.com now.
    If your settings for your contacts are correct on your iPad and it still won't sync new contacts to your phone, do the same thing for Contacts (add any missing contacts to icloud.com, turn iCloud syncing off, choose Delete from My iPhone, after a minute turn contact syncing back on, try adding a new contacts to confirm that it syncs).

  • My apple id password only works on my mac but not on my iPhone or iPad

    my apple id password only works on my mac but not on my iPhone or iPad what do i do?

    Welcome to the Apple Community.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)

  • How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

    I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
    have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

    Jay del Rosario wrote:
    >
    > How do I troubleshoot installation/distribution of a LabVIEW .exe
    > which processes data using Matlab when it works on some computers but
    > not others?
    Poke around zone.ni.com and
    http://digital.natinst.com/public.nsf/$$Search/ .
    Good luck, Mark

  • Site works in the app, but not in the browser.

    Hello iWeb experts,
    I've got problems.
    Last night I published my site. And while it appears, and functions, properly in my iWeb app, it doesn't do the same in Safari, Firefox, and Internet Explorer.
    Two issues...
    FONTS
    I chose Bellamie, Univers Condensed, and Marydale as my fonts. From reading these forums, I've discovered those won't wysiwyg on other computers if the fonts aren't available and open on them. So my two choices are to make every bit of text a graphic or to use a set of more universal fonts, correct? So my questions are...One, is there a list somewhere of fonts that will work in any browser? And, two, is there a short-cut, or easy way to transform type into a graphic without having to create image files?
    FUNCTIONS
    Here are the functions that work fine in iWeb but have gone haywire in all of the browsers I tested...
    • The type in one nav link appears smaller than all the rest.
    • Some links are active, others are not.
    • Rollover highlighting works on some links, but not others.
    • Most of the rollover links appear in the proper static color, a few do not.
    I've tested these functions on three Macs, one PC, and in the three browsers mentioned above. All of them show the exact same problems. So something must be going wrong with iWebs coding, or my host server musn't like iWeb.
    Any thoughts, suggestions on these two issues? Thanks much for any advice.
    John
    PS - For reference, see: www.johnrunk.com

    Fascinating, Kirk (+he types with one raised eyebrow+).
    QuickTimeKirk wrote:
    When I drag across your page most of your links do not change. The "text" portion of them doesn't change, either. Something is covering them.
    I can see that. But for the life of me, I don't know what could be covering those links. In my app, when I click in the area of the links, the type is the first item selected. Unless, possibly, it could somehow be the faint reflection of my black-and-white image (me & the ground I stand on). Hmmm...
    QuickTimeKirk wrote:
    Single click (outside the boundaries of your page contents) and an "outline" will appear. It shows the image file dimensions and locations.
    This I don't see. An outline? As in "an object outline," or as in "a list of dimensions and locations?" When I click outside my page contents, I get nothing.
    Thanks, QTK. I truly appreciate your troubleshooting here.
    John

  • Can get the AirPlay to work off my computer, but not my iPhone or iPad. I have the latest software.  Airplay logo never appears on iPhone or iPad.

    Can get the AirPlay to work off my computer, but not my iPhone or iPad. I have the latest software.  Airplay logo never appears on iPhone or iPad.

    Try here  >  http://support.apple.com/kb/TS1538

  • HT5787 How can I change an old email to a new one? For some reason my old email comes up on my iPhone - and I don't get access to change to my new email which I have on my iCloud account on my pc. My AppleID works on my pc, but not on my iPhone!

    How can I change an old email adress on my iCloud accout to my new email (the same as on my pc), as long as my Apple ID works on my pc but not on my iPhone?
    Br
    Finn

    You would have to change it back to your old email address in order to turn off "Find My iPhone" on your devices. After you changed it back to your old address and deactivated "Find My iPhone" (activation lock) you could change your Apple ID to your new address again. Now it should wok on all your devices.

Maybe you are looking for

  • Firefox won't redraw on analog monitor driven by Radeon 4350 graphics card

    I'm running two XP SP3 on a reasonably current desktop with 4 GB and an ASUS Radeon 4350 graphics card with 512MB. The card drives two Samsung SyncMaster 2443 monitors, one from analog RGB port, the other from a DVI port. I've been using Firefox sinc

  • Multiple stages of document status

    Hello, I have following scenario: In theory When person A creates documents and put it in the library, he should be in status X. Person B can change it's status to Y or reject it. When the document is in status Y, person C can change it's status to Z

  • To maintain foreign currency exchange rates

    Hi, Please help me with this scenario. I want to maintain  foreign currency exchange rates.Kindly tell me the process to maintain these rates. and also please tell me that is their any feasibility to maintain exchange rates on daily basis. Regards, P

  • SOAP to IDOC with or with out BPM

    Hello All, I am doing a SOAP to IDOC scenario for which I want to know if I need to create anything in SLD(like products, software components etc). Also can any one brief me on what all steps I need to do in SLD, IR, & ID. For this scenario do I need

  • How to hide Top Level Navigation?

    Hi, I created a quicklink for an iview. I am able to call the iview from IE window using the quicklink. But it displays the top level navigation (Company Logo, Welcome message, Logoff, Role tabs,...). How do I hide this? Thanks Sundar