Synced audio stops playing in events browser

I am trying to select FAVORITE clips from within the event browser. As soon as I touch the J K L keys or stop playback the sound vanishes. When I open the synchronised clip in the timeline it plays fine and the sound is there, even in the event browser the waveform is still present but I'm not hearing anything. Can anyone help please.

Not sure if I've posted the photograph or not. I'm new to this...
It should show the clip in the event browser and the same clip opened on the timeline. The sound cuts off around the same point as in the picture.
Thankk you for your help and best regards,

Similar Messages

  • Audio stops playing on page change

    Audio stops playing on page change if horizontal sliding only is checked. But it works when it is unchecked (InDesign CC)  I would like it works in both cases. Is it possible ? I know it was not possible a few months ago...
    Have another question : audio controller doesn't update on page turn even if the audio file is linked to the first one. Any idea ?
    Thanks for your help

    Hi Alexmamba,
    I can't see how you would insert the coding for this option.  You'd need markers for the start and ending of any particular chapter.
    Is this a book related to music?  As a reader, I'm not sure I would want to listen to music the entire time I'm reading, unless there was an option to turn it off.  It's like webpages that automatically play music when you visit the site.  What the author of the site thinks is great music is usually distracting to the reader.
    My intention is not to be rude, by the way.  Just putting the comments out there for consideration.

  • Audio stops playing on page change if horizontal sliding only is checked.

    Audio stops playing on page change if horizontal sliding only is checked. But it works when it is unchecked (InDesign CC)  I would like it works in both cases. Is it possible ? I know it was not possible a few months ago...
    Have another question : audio controller doesn't update on page turn even if the audio file is linked to the first one. Any idea ?
    Thanks for your help

    Find another Mac and check that the A&H works, report back.
    You should also consider a decent external interface, recording off the minijack is the worst choice.

  • Audio stops playing after applying effect

    First of all, I'm a beginner, so any help is appreciated. I' ve strung a few clips together including a photo and some video. I imported a sound file to go with the clips. Everything worked fine until I applied an effect to the video clip (contrast and brightness). Now when I play back the movie, the audio stops playing soon after beginning the video clip. I've checked the volume of the audio and it's fine.... as soon as I undo the effect, it all plays fine again.
    Any suggestions?
    powerbook G4   Mac OS X (10.3.9)  

    Hi jdoo and welcome!
    Try extracting the audio from that video clip before
    adding the transition/effect.
    Thanks for your suggestion. I just discovered what the problem was. When I applied the effect I didn't notice that there was a progress bar and that it took quite a while for the effect to be totally applied. I was trying to play the movie back while processing was taking place and that interrupted the audio.
    powerbook G4 Mac OS X (10.3.9)

  • Logic 10.0.6 Quicktime audio stops playing

    I'm having an issue with Logic 10.0.6 where the QT audio stops playing along with the movie occaisionally.  Especially if I change anything in the tempo window, but also sometimes when I haven't changed anything at all. 
    To get it to start playing again all I have to do is open up the Movie settings window and touch the volume setting slider, but that doesn't keep it from happening again.  I've never had this issue with any previous version of Logic and have been running the audio this way for years.
    Is anyone else having this issue, and have you found another more permanent solution?
    Thanks

    I have the exact same issue. I'm running Mavericks. My friend that has Mountain Lion has no issues.
    Although I thought all it was doing was cutting off 4 frames in the front. But it sounds like you're saying it shifts the whole track by 4 frames, which is even worse!
    Apple, fix this, please!

  • Audio stops playing on page turn

    hello,
    Hope any of you can help me. I added a audio file to a page, in a chapter. I want to the audio to start playing when the page is opened, I selected the "play on page load" option, BUT I also want to the audio to continue playing whilst I flip through the other pages in the chapter. For some mysterouis reason, the audio stops when I flip to the next page. The option "stop on page turn" is not selected.
    Does anyone have a workaround to get this fixed? I need it really badly.
    Thank you for your help!
    Marl

    Thank you for your response Bob!
    I just found out, by accident!, that when you keep smooth scrolling on it works! -- The audio keeps playing just fine when browsing throuhg the next pages. Now the only thing I have to find out is how I can keep the smooth scrolling option in horizontal ONLY.

  • Audio stops playing after a few seconds when importing a HD clip

    I have CS4 running on Enterprise version of Windows 7 64 bit on the following hardware:
    Processor:  Intel i7-970 Hex core Gulftown
    Motherboard: Asus P6X58 Premium
    RAM: 24GB Kingston DDR3 1065
    Video card: Nvidia Geforce9800GT
    Four hard drives, system disk is stand alone and the other three are split in groups of RAID0
    When I import a HD clip from file (EXCAM EX 720p60p) the audio will play in the source window or the timeline for a few seconds and then quit.  If I edit the clip in Soundbooth, from the timeline, the waveform quits at the point that the audio stopped in the timeline.
    This behavior is very sporatic; sometimes it happens and sometimes it doesn't.  Closing the program and restarting sometimes solves a certain clips audio problem, sometimes it doesn't. Yesterday I worked all day without it happening but today it is happening every few clips.  Some I can fix by restarting Premiere, some I can't.
    If I import the clip from Bridge to Soundbooth the audio waveform is just fine.
    I have seen this problem discussed several years ago but never resolved in that discussion.  Any ideas?

    Yes!  I imported the entire BPAV in a file on my scratch drive under the specific project folder.  From there I am using the media browser in CS4 to either preview the clip or import it into the project.  The audio drops out whether it is previewed or imported.  And as I have said, this behavior is not consistant.  I have yet to find a repeatable cure.
    Also as I have said if I import the offending clip, from the same folder, into Soundbooth using Bridge the waveform is fine.  If I import the same clip into Soundbooth from the Premiere timeline the waveform goes flat where the audio stopped in Premiere.
    Thanks for the quick replies.
    I am readingthe article that was suggested soon.

  • Swf file has stopped playing in 'live' browser only

    Hello everyone,
    Hope you can help with this, whilst working on my site one of the swf files stopped playing when viewed in the browser (live). The file plays ok from Dreamweaver from both local view and remote view. Went onto web server cpanel and played the swf file ok from there as well. Have checked the code and all seems fine, I wasn't even working with that file when it went wrong, all I done was replaced a png picture with a swf file on a different part of the page, this new swf plays fine along with all other swf files on my site. I have uploaded and syncronised both the page and swf files again but still no joy.
    I really am stumped for an answer, any help would be greatly appreciated.
    Thanks in advance,
    Stuart

    Here's the link, but after 3 hours of not playing it started to play by itself after I added a favicon (which still isn't working) to the index page.
    That is really strange and a bit worrying as it seems to have a mind of it's own. It also happened once before on another page when I was adding content to the site. I was able to kickstart that one by uploading the page again from local.
    The swf file which wasn't playing is midway down page showing drawings.
    http://www.joinerycadsolutions.com/St_Johns.html
    At least it's working now although I feel scared to touch the site in case I loose it/another again.
    Thanks for the reply.
    Stuart

  • Audio Ads Play With No Browser Open

    I have audio ads playing randomly on my computer all the time, like when all my browser windows are closed and Safari is shut down. It's not a pop-up, it's not an ad on a web page (as all windows/browsing apps can be shut down and it still happens). I get McDonalds ads, and West Virginia tourism ads, and random movie ads. What I'm trying to say is that it's completely bleeping random. They especially seem to enjoy playing at top volume while I am watching a DVD on my computer (nice to hear how awesome West Virginia is while watching Battlestar Galactica) or, even better, shouting out of my computer right as I have gotten my children to sleep at night.
    I've googled it many times, and I've found a bunch of suggestions that it may be a Rootkit/bootkit kind of malware(? so says a forum commenter in response to someone's situation that sounded almost exactly like mine), but as of yet, no confirmation that this is actually the problem, and no idea of how to fix this sort of issue on a Mac (all online references to such a problem seem to be happening to people who use Windows operating systems).
    It's been going on for months now, and I've hit my limit of trying to solve it on my own... Any insights?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • IPhone 6 audio stops playing with auto lock and when earphones pulled out

    When playing an mp3 through Dropbox on my iPhone 6, by audio has been freezing when the phone goes into auto lock. It never used to do this, and I don't think I've changed any settings.
    I tried playing music through iTunes to see if it was a dropbox issue. The same thing happens. It also happens if I"m listening through the earphones and I pull the earphones out of the phone. The audio just turns off. iTunes is still open, but it stops playing.
    Does anyone know if this is an iPhone 6 thing?

    hh Darwin wrote:
    Thanks Meg,
    glad to know it's normal.
    So my problem remains with the audio freezing when the phone goes into auto lock then. This didn't used to happen.
    cheers,
    hh
    No, that shouldn't happen. Have you tried resetting your device by pressing and holding the Home button and power button until the apple appears?

  • Audio stops playing partway into mpeg4 video

    I recently added an mpeg4 video into my itunes library. It plays just fine in itunes. However, when I try to watch it on the ipod, the audio disappears half-way through the video. The video does continue to play in its entirety, but without sound. Any suggestions? Thanks!

    I have the same problems. I am using Adobe Premiere to output an uncompressed Quicktime Mov and since I cannot control the bitrate with Quicktime Pro when converting to iPod format I now use VLC to convert to a iPod compatible file. Up to now I use mpg4v with 1024KBit as Video and mpg4a with 128KBit as Audio. I output a quicktime mov file.
    When I convert the video with Quicktime Pro using custom MP4 settings so I can play the file on iPod I get video glitches every 10 seconds when the picture gets like a washed effect and gets very unsharp.
    It plays fine in iTunes and Quicktime but when playing on the iPod the audio just stops after approx. 15 minutes. Happened with 3 different Movie files. Everytime close to 15:20 into the video. All 3 Videos are very different in total length.
    When encoding the initial Quicktime File I use Apple Photo JPEG for uncompressed video and QDesign2 Audio encoding.
    Is there any step that might indicate a problem in the whole process?
    Since we got a couple of iPod here, we also had the same problem on every other one we tried. All use the 1.2 Firmware and iTunes 7.02.
    Any help appreciated.
    KajaSheen

  • Audio stops playing - USB Codec output - "sound" in System preferences

    We play music at our church from iTunes on our MB pro to an Allen & Heath 420 mixer via USB. This is switched to USB output in sound in System preferences. We have been doing this flawlessly for about 1.5 years.
    Recently, in the middle of the music it stops. There is no more signal to the mixer but if I switch the preferences to internal speakers there is sound continuing. The only fix is to reboot which is very problematic in the middle of a music set.
    This happens also when playing through the USB from Garageband as well.
    It seems like a system wide codec issue but I don't know what the fix is for it.
    Any suggestions? I cannot simply switch to using the miniplug because we record through that.

    Find another Mac and check that the A&H works, report back.
    You should also consider a decent external interface, recording off the minijack is the worst choice.

  • Audio stops playing

    After an edit of a Captivate movie, the sound suddenly
    doesn't play any more after slide 22. In the Edit mode, the audio
    is still there, both graphically, and it plays on the individual
    slide. But not as the movie progresses. Help?????

    Hi St. Mark - I have the same problem - let me give a few
    more details, we might have something in common.
    1. I am on the .1418.1418 version of Captivate.
    2. I use a Dell D810 Latitude laptop with 1GB RAM and plenty
    of available disk space.
    3. I use a LogiTec USB port microphone / headset combo.
    The audio records amazingly well - even better than via the
    analog plug, which I tried at the beginning and gave up on. As I
    preview each slide in my 52 slide series - and more than a few of
    them have no audio at all - all is well. I hear all audio in
    slingle slide preview and in 5-slide preview just fine. However,
    when I publish and create a standalone .exe, and play the file, the
    audio starts out just fine, and then cuts out to dead silence
    somewhere along the way. On one try, it died after 6 or so slides.
    On another, it made it almost to the end - around slide 47 it cut
    out. I can still hear keystroke sounds, just none of my own lovely
    voice. Maybe the laptop is getting sick of hearing me yammer ??
    It feels like a RAM or conflict issue - so I even tried this
    - I saved the project, closed everything down (I typically only
    have Outlook open with Captivate), rebooted, then published to the
    .exe file, then closed Captivate, rebooted again, and ran the file.
    That's the time it allllllmost made it.
    Should I expect varying levels of success on my client's
    machine based on their RAM? Not cool - because my clients are
    school systems and municipalities, who don't always have great
    system specs.

  • Itunes 8 - audio stops playing / buffers

    hi
    is anyone else having this issue? Since upgrading to itunes8 I'm getting music files suddenly pausing/stopping during playback, especially noticeable in long files such as DJ sets - at random but more often when i'm doing something else that might be considered a heavy-ish operation such as opening Adobe applications. The whole system stalls for a few seconds, sometimes beachballing for a bit, and then the song resumes as does normal operation. It's quite quick but also quite frequent and therefore frustrating.
    I'm on a fast Mac Book Pro and have never had this issue before so it's not like i'm overloading my system, it should be fairly capable of playing mp3s in the background while I work
    Please help

    I'm having the same problem. iTunes will just pause for no obvious reason. It started the other day when I finally upgraded to 10.5. I'm on a PPC Mac Mini. It isn't pinwheeling or bogging anything like that. It really just seems to be pausing...for no reason. Go hit play again and things resume. It happens with short songs ripped from CD, iTunes purchases, Podcasts, or anything else.

  • IMovie audio just stops playing in the middle of creating a project.

    I have several photo slideshows to which I'm adding music. Several times during the creation of a project my audio selections stop playing back with the slideshow.     I am shortening and/or lengthen the music selections through the Clip Trimmer.  It seems, however, if I do this many times trying to get just the right selection of the music, all audio stops playing back.  It's almost as if I overload the program with too many changes before finalizing the project. Eventually, the project seems to reload and the music is back but then photos and music don't sync. Also, the music will only play in full screen mode and not in the project window.   Has anyone else had this problem? Is there a solution?

    Try creatint a new project in iDVD and drag the QT movie into the menu being careful to avoid any drop zones. Then follow this workflow to help ensure the best quality final product:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

Maybe you are looking for

  • How can I turn off an annoying network lost message?

    Ever since the last iPhone software update I keep getting a message saying "Network Lost. Your selected mobile network is no longer available. You can choose a different network in settings." Now, I know what this means. There are only a few places i

  • How to remove duplicate phone numbers under iMessage settings?

    I've been using iMessage for a while now and a lot of my friends have brought to my attention that every iMessage I sent showed it came from my email rather than my phone number. So I signed out of iMessage and tried logging back in using my phone nu

  • Problem with running the midlet class (Error with Installation suite )

    hi everyone... i have problem with running the midlet class(BluetoothChatMIDlet.java) it keep showing me the same kind of error in the output pane of netbeans... which is: Installing suite from: http://127.0.0.1:49296/Chat.jad [WARN] [rms     ] javac

  • Macbook Air running OS Mavericks won't print wirelessly to Officejet 4620

    I'm running a 2014 macbook air running OS 10.9.3 with an officejet 4620 all connected to the same wireless network.  I have an older Macbook running OS 10.7.5.  The older macbook will print fine wirelessly to the printer.  The new macbook air will co

  • Champion of Ubuntu?

    Hope this is a good forum to ask this question Who is the South African guy who has championed the cause of Ubuntu? Another question please: Some people have linux and or ubuntu OS in addition in their macs. What´s the point or advantage? Thanks Gord