Synced my 3G and now my alarm doesn't work.

Alarm is still set as 'on' but doesn't alarm. How do I fix this?

Near as I can recall offhand, replacing the optical drive shouldn't have involved disconnecting any of the video cables (and given that you're still around, you weren't electrocuted by accidentally hitting any of the hot analog/video connectors ); the only thing that comes to mind is to again carefully disassemble the eMac and double check that the internal connectors are fully seated. You can refer to the links at the end of Apple eMac Upgrade Guide (where that site says "very slow downloads", it's not kidding).

Similar Messages

I have an iPhone and when I got it, I had a Toshiba laptop. Now I have a MacBook Pro, but when I try to wi-fi sync my iphone and new computer, it doesn't work because on my iphone it is still trying to sync with my old computer. How I can fix this?

I have an iPhone and when I got it, I had a Toshiba laptop. Now I have a MacBook Pro, but when I try to wi-fi sync my iphone and new computer, it doesn't work because on my iphone it is still trying to sync with my old computer. How I can fix this?

Move the content from the old computer to the new computer.
Sync the iPhone via cable to the new computer and enable Wi-Fi syncing.
It should now be possible to sync via Wi-Fi to the new computer.

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work. Help?

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
^^ that's the main problem. Here's the full history.
I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

I have just updated my software to 10.8.2 and now my sound doesn't work. Any suggestions?

I have just updated my software to 10.8.2 and now my sound doesn't work. Any suggestions?

I used disk permission repair to try to resolve this as well as a 'soft' restart. Still have a grayed-out mute checkbox in the sound section of system preferences.

I just downloaded the updates and now my mail doesn't work. It says I now need a newer version of OS to allow I've to open my mail which I can't right now

I just downloaded the updates and now my mail doesn't work. It says I now need a newer version of OS to allow I've to open my mail which I can't right now

What version of the OS X are you running? Go to the Apple in the upper left corner and select About This Mac and report the Version back here.

I recently installed WIndows 8 and now my scanner doesn't work. I have an HP M175nw printer/scanner

I recently installed Windows 8 and now my scanner doesn't work. I have an HP M175nw printer/scanner

update your scanner's driver. ie, see if hp has a win 8 driver for that model.

Will I lose my photos in iPhoto if upgrade to a latest version? I have upgraded my system to Mavericks and now my iPhoto doesn't work. Can anyone help, please?

Will I lose my photos in iPhoto if upgrade to a latest version? I have upgraded my system to Mavericks and now my iPhoto doesn't work. Can anyone help, please?

Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

Updated to OS4 and now my phone doesn't work!!

Updated my phone to the new OS4 and now my phone doesn't work. It says I have to do a system restore for it to work. If I do a system restore won't that erase all of my photos? Is there anything I can do so I won't lose any of my infomation? I have tons of photos on my phone. If anyone could help me out, I would be grateful.
When I turn the phone on it shows a picture of the usb cable and the itunes logo. I don't want to do a system restore if I don't have to. I don't want to lose my pictures. HELP Please!!

That is one lesson we all have to learn. Backup. Did you backup your iphone regularly? If you did, your photos will backup with it and the restore will put it back on the phone. If you didn't, I am sorry to say that there is probably no way to get those precious moments back. I found that out the hard way years ago. I now learned to backup my computer and iphones at least once a month.

HT2513 I updated the operating system on my Macbook to Mavericks OSX 10.9 the other day and now my iCal doesn't work. It gets stuck "moving calendars to server account" and never recovers. What can I do?

I updated the operating system on my Macbook to Mavericks OSX 10.9 the other day and now my iCal doesn't work. It gets stuck "moving calendars to server account" and never recovers. What can I do?

So I do.
I quetioned it also in spanish but nobody answered yet.

I mashed the buttons and now my L200P doesn't work!

Hi guys,
I recently bought a second-hand ThinkVision L200P. I installed it behind a large sheet of glass, which seems to have had the unfortunate effect of pressing all the buttons at once for an extended period of time, and now my L200P doesn't display an image.
I opened up the L200P case (it's second hand) and took out the little 'button bar' PCB to make sure none of them were stuck in. By pressing the little switches on the PCB, I see the following behaviour:
Upon pressing the power button, I see the 'IBM Thinkpad' splashscreen for a moment, then it disappears. I think it used to then say 'Power Saving mode' but it doesn't anymore.
Upon presssing and holding the menu button for 10 seconds, I get the message 'Menu Locked'. If I press and hold for a further 10 seconds, I get 'Menu Unlocked'. The text is clear and bright green
None of the other buttons appear to do anything, even after pressing them many times and holding them for long periods
Powering on while holding 'left' and 'right' arrows does nothing
Holding 'right' arrow without any connectors in does nothing
My hunch is that mashing the buttons has somehow, say, turned down the brightness and contrast and locked the menu or something. But I don't know how to undo it.
What should be my next step? Like I said I've opened the case, so I'd be happy to 'hard reset' the unit by shorting a jumper or something.
Regards,
Richard.
Message Edited by kennardconsult on 08-04-2009 02:01 AM

Lcd screen are not consumer serviceable parts.......... it is not like a laptop. There is no hard reset in LCD monitors like you are suggesting. You would need a new PCB from somewhere, you could try to source a broken L200p and salvage that part, but other than that there is little you can do.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

I just upgraded the software on my iphone 4s and now the touchscreen doesn't work and i have the itunes logo an arrow and a plug on my screen

I just upgraded the software on my iPhone 4s. Now the touchscreen doesn't work and on the screen is the itunes logo, an arrow and a plug. I have powered it off and on and nothing changes

The iTunes icon and cable means that it's gone into recovery mode - you will need to connect the phone to your computer's iTunes and you should be able to use that to reset the phone, and you can then restore/resync your content to it

I updated the new OS7.2 version, and now my iPad doesn't work at all.

I updated my iPad with OS7.2 version, and now my iPad is not working at all. The screen had a frozen iTunes icon with the diagram of the charging cord. I can't turn it on or off. What do I do?

You need to start iTunes on your computer and connect the iPad to the computer. Tis will allow you to go through the restore process. Be sure to update iTunes to version 11.1 before connecting your iPad.
Also see this Apple support page:
http://support.apple.com/kb/HT1808

How do I turn on my wireless keyboard and make it 'discoverable'? I got a message that the batteries were low, so I changed them for new ones and now the keyboard doesn't work.

I got a message saying that the batteries were low, so changed them for new ones and now the keyboard cannot be 'found'. There seems to be no way to turn it on and make it 'discoverable' to the system. At the moment I'm typing this on a spare keyboard plugged into the back of my mac via a USB. Please help!

Have you checked to make sure the batteries are inserted the correct way? Have you tried to turn it on by pushing the right upper (round) edge of the keyboard - if you do that, do you see a tiny little green light? Since you have a wired keyboard, can you get to the Bluetooth setup/preference pane so you can manually try to sync the keyboard?
PS - posting duplicate posts is not helpful - it makes things too confusing, so I've asked the hosts to remove your other (identical) post.

Upgraded to iOS6 and now charging cable doesn't work

I just upgraded to iOS6 n my iPhone 4, and now my charging cable doesn't work. No...it's not an "official" Apple charger, but even the usb cable doesn't work when I plug it into my computer. If I plug my iPad charger into it, it works fine. How can the new operating system determine what kind of usb charging cable it "wants" to accept? This charger and cable worked flawlessly before the OS upgrade.

Same problem here. I use a wall charger and have had success by unplugging the charger from the wall, plugging the adapter into the iPhone, then plugging charger back into wall. Had the same problem with a car charger and got the phone to charge using the same procedure. I'd love to know if this works for you. Good luck!

Help! I deleted a folder, and now my iPod doesn't work!

Being the new owner of an iPod, I was unaware that I was required to use iTunes to manage data. Instead, I browsed the iPod's files using Windows Explorer and manually deleted a folder of pictures. Now my iPod no longer works; it displays a link to the Apple support site. My computer no longer recognizes the iPod (once it is connected, it displays the removable drive in My Computer, but doesn't show up in iTunes. iPod Updater freezes when the iPod is connected.), so I cannot restore it. Please help!
PC Windows XP Pro

had the same problem aswell mate, dont worry its not too complicated
1st step is to get ur ipod into disk mode and open my computer. once here right click on removable disk and select format. if this works that means ur computer is atleast responding to your ipod and the problem should be over and done with.
if that doesnt work goto step 2
step 2 is, when you turn your ipod on does it make any sounds??? if it makes some beeps and little sounds you have a problem with your hard disk in the ipod. not to worry if your ipods new its under warranty and you can send it back.
step3 is to call apple on 1-800-275-2273 between 9 am and 9pm. follow the prompts and talk to a consultant.
the same thing happened to me, so everything above is what i was told from an ipod consultant. good luck and dont stress.

Synced my 3G and now my alarm doesn't work.

Similar Messages

Maybe you are looking for