Synced (named) TV Shows in the same folder on iPhone 6 Plus

Strange issue here, not something I have experienced in the past.
I have a number of training videos that have been placed in to TV Shows within iTunes.
In the past if I wanted to copy this content to a device (iPhone or iPad Mini Retina) I would simply drag and drop and it would be synced to the device in it's own folder within the Videos app. Even files that were originally in different folders, when deleted and added back to the device would share the same folder making life somewhat difficult.
Now I don't know if this is IOS 8.2 related or iTunes 12 related but now if I try to sync the same shows back to my devices the files all get placed in to the same gray folder, each show is named the same, each file is named \ numbers correctly as far as episodes is concerned (I even renamed the file directly and numbered it within iTunes instead just to see if that worked).
This is starting to get a little bit frustrating as these videos could number in the 100's and the last thing I want to do is have to re-name each file so that I can identify the training as well as the subject, some of which are very similar.
Any one any ideas? I don't want to have to go back to using a 3rd party app as using it this way worked well and prior to IOS 8 I also had thumbnails for each show (which of course now don't show up either).

Hi TheSimpleDaniel,
Welcome to the Apple Support Communities!
If documents on iCloud are not showing on your iOS device, I would recommend reading over and working through the attached article.
iCloud: Troubleshooting Documents in the Cloud - Apple Support
Best regards,
Joe

Similar Messages

Why do manually added mp3s in the Podcasts app all show up in the same folder?

Let me explain!
I like to download lectures and talks and audio books from other sources than iTunes.
I like to add these mp3 files to iTunes, change the Media type of them from Music to Podcast, and transfer them to my iPod Touch. This is so I will more easily know which ones have been listened to and can be removed.
This worked (and works) well in the Music app. Everything was separated into folders based on what album name I had manually assigned to the ID3 tags of the files.
But in the Podcast app, all of these files are now lumped into one folder.
I currently have eight un-listened-to episodes of Philip K. Dick's Valis on my iPod Touch. But the folder shows a count of 106 unheard episodes in relation to this audio book, because it lumps all of my other manually added podcast media tracks into the same folder.
Why is this?
Why does the Podcasts app refuse to let me separate manually added files into individual folders based on album information?
Had the My Stations feature let me populate its playlists in a more rational manner, and also allowed me to manually change the running order of the tracks (something which only seems to be possible in the On-The-Go playlist), I would not think that this omission was such an annoyance.
I have been searching for months for mentions of this problem, but I have not seen a single one, and so I have finally decided to make my own thread.
Let me know if the nature of my problem remains unclear.
Joakim

That doesn't do anything.
When I plug my phone in and attempt to sync it with iTunes and click on "Steven's iPhone" under "Devices" the display to the right just says "loading..." and it stays like that for hours. Nothing happens.
As far as I can tell, there is literally no way for me to delete the photos from my iPhone and I therefore, cannot upgrade to the newest software, download new apps, etc.

Files from Windows 7 are not alphabetized correctly on OS X, and can match identically named files in the same folder

I receive MS Word files from students using Macs or Windows-based computers. This year, files prepared by students using Windows 7 are not alphabetized correctly on my Mac (under Snow Leopard or Mountain Lion). The same four students keep having their files put at the END of the alphabetical sort by name, even though the files should appear earlier in the list. I have to copy the file contents and paste the contents into a new document to get the new document to appear in the right order, and if I do so, then BOTH the old and new files appear in the Finder, even though the names appear to be identical! So can have to files with the same name in the same folder, which ought to be impossible. Does anyone have any idea what's going on?

Bingo!
The problem is not the letters themselves, but non-letter characters in the file name; this showed up with the fixed-width fonts. The apparent duplicates and mis-sorting are caused by dashes, which differ because they're done as en-dashes in one file name and em-dashes in the other file name, or by curly or straight apostrophes. I didn't see that in the Finder window.
I never saw this behavior before this year. Last year, when I was using a Mac for the first time, I did not see any such problem, even though my students' files were named using the same conventions. When I was using a Windows-based laptop before that, I never saw the problem.
Windows must do something to style the non-letter characters differently than a Mac. Is there any place in Windows Explorer or the OS X Finder that styles characters this way? I can see this being a big problem for someone who needs to sort very important data by name, when the files are coming from different operating systems!
(I just Googled en-dash, em-dash, and curly quotes with file names, and found a good number of posts on various sites about similar problems based on ASCI character coding, html coding, Windows Explorer, and other applications. Sometimes the files don't appear at all, because the application reading the file name can't deal with a certain ASCI code. What a mess.)

I am trying to transfer my movies (mp4 files) to my IPad, but they are not showing up on the IPad. I have 13 movies showing on my IPad that they are in ICloud. I've sync'd the movies I want to the IPad, but only one is showing under the "movies" folder. ?

I have been trying to transfer some different movies from my PC to my IPad, but they are not showing in the "movie" folder. I have sync'd the movies (these are mp4 files) that I wanted transfered, but only one is showing in the folder. There are 13 other movies in the folder that have the ICloud symbol in the corner of their picture. I understand that I can pull those movies from ICloud any time I want to watch them, but I want to watch the ones that I've just sync'd with my IPad. How do I find them? After I checked the movies I wanted, I "applied" them and watched it sync and copy the wanted movies to my IPad. Now what? Thanks.

There are some good programs that you could use to convert the format, Handbrake or Mpegstreamclip are two good free ones. Convert them to MP4 and then try importing them again.

Some music files do not show up in google play music app library. I did clear cache/data and restarted phone. The music is stored on the SD card. Most of the music in the library is in the same folder on the sd card. I can play the song from file mana

some music files do not show up in google play music app library. I did clear cache/data and restarted phone. The music is stored on the SD card. Most of the music in the library is in the same folder on the sd card. I can play the song from file manager, but it still is not in the music library in play music.

Cyndi6858, help is here! We'd be happy to help figure this out. Just to be sure though, the Droid Maxx should not have an SD card. Is this the Droid Razr Maxx? How did you add the music to the device? Are you able to see the files and folders located on the SD card or device when plugged in?
Thanks,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Showing "0" photos in a library folder. But the photos show in that same folder explore.

Hi Everyone - Showing "0" photos in a library folder. But the photos show in that same folder explore. I have LR 5.6 set to "Show photos in Subfolder". I have filters off. There are 380 photos that I spent several days editing. I have been building a book online for the past several days and have been uploading the photos with no problem. I have been going back into this folder in the library to pick what I want to use with no problem until today. The folder shows in the "Folder" section of the Library but it shows "0" photos are in the folder. When I open that same folder in explore all of the photos are there. I have changed nothing since working on this project yesterday. I have rebooted my system and that did not help. Any suggestions to make these photos show up again in the Library would be greatly appreciated! Thanks in advance! Toby

Thanks for the fast reply dj_paige! I had already searched for the photos prior to my post and found the photos neatly tucked away in the folder that was showing "0" photos. But could not view them in LR. I should have mentioned that in my previous post. I also tried synchronizing the folder after I rebooted this morning to no avail. Now the strange thing - I just clicked on synchronize folder once again and it replaced the photos into the folder and I can now see them in LR once again. I can't explain why that did not work earlier but am glad it worked just now. Thanks again for your reply!

HT4236 photos are syncing without a problem however movies in the same folder do not. How do you sync movies from iPhoto to the iPhone?.

How do i sync movies from iphoto to my iphone? photos in the same folder sync just fine but no movies.

As noted in th article you came from, tick Include videos on the Photos tab.

Create navigation iviews to show differents documents from the same folder

Does any body knows how can i create navigations iviews that show differents documents from the same folder? This is my situation i have a folder that include documents for diferents countries, i want create a navigation iview that show only the documents for Canada from this folder.

The only other option is to give user access using taxonomy. But it seems like a lot of extra work to keep documents in the same directory. anyway, here is the overview of steps:
1. create index (SA > System Configuration > Knowledge Mgmnt > Index Administration)
2. create categories within the taxonomy.
3. define Query on each category. (Content Management > Classification > Taxonomy Query Builder)
4. create property: property namespace, property group. (SA > System Configuration > Knowledge Mgmnt > Content Mgmnt > Global Services > Property Metadata)
5. <b>assign props to the docs.</b>
6. Schedule the crawler to create classification index.
7. classify docs so that docs actually go recide in the categories
<b>8. Create role, page and KM Navigation iViews for end user to browse the taxonomy instead of going directly to the repository.</b>
9. restrict permissions on the taxonomy for different user groups.
Kumar

Batch convert Pages files to Doc and stay in the same folder?

Hi there,
I use iWork '09 on Mountain Lion. I recently switched to Microsoft Word and prefer it over Pages (personal preference). However, I have nearly 1000 files on my computer that are in Pages format. I have extensively searched this issue in the Apple Support Communities and it appears that there are scripts that DO EXIST that batch convert Pages files into Word files. However, it appears that many of these scripts were built for older versions of iWork and therefore I run into various errors. For example, I used the script available at http://pagesfaq.blogspot.com/2008/01/export-folder-to-word-rtf-pdf-txt-or.html and click run but nothing actually happens (the script runs for less than a second, then I can click run again). I was able to use one script successfully (pasted below), but the only reason I can't use it is because it saves ALL my converted documents in one folder on my desktop and I would like a script that can save them in the original file were the Pages document is located.
So, is there an iWork '09 compatible script that can convert my Pages documents to Word documents and save them in the same folder as the original? Oh, and for an added bonus, it'd be cool if the script also deleted my Pages version after it was done with the conversion
--[SCRIPT batch_exportPages2DOC] (* Enregistrer ce script en tant que script ou progiciel. Exécuter ce script ou déposer l'icône d'un dossier sur son icône. Il ouvre tout document Pages du dossier et l' enregistre en fichier DOC dans le dossier "was_Pages_now_DOC". Celui-ci peut être sur le bureau ou dans le dossier "~/Documents". Si le GUIscripting n'est pas activé le script demande votre mot de passe pour l'activer. Le script récupère le dossier d'exportation par défaut dans le fichier de préférences de Pages. Éviter de cliquer durant l'exécution du script sauf évidemment pour sélectionner le dossier source. ************* Save the script as script or application bundle. Run it or drag and drop a folder icon on its icon. It opens every Pages's documents stored in the folder and save it as DOC file in a folder named "was_Pages_now_DOC". This one may be on the desktop or in the "~/Documents" folder. according to the property storeOnDesktop. If GUIscripting is disabled the script ask for your password to enable it. The script extract the default export path from the Pages's preferences file. Don't click when the script is running. Except, of course, to select the source folder. ************* Yvan KOENIG (VALLAURIS, France) 2008/04/20 2009/06/17 adapté pour format .doc 2009/12/13 updated for MacOs 10.6… *) property theApp : "Pages" property theExt : "pages" property nomDuRapport : "report_Pages2DOC.txt" property nom_du_dossier : "was_Pages_now_DOC" property storeOnDesktop : true (* true = dest folder will be on Desktop false = dest folder will be in "~/Documents" *) property msg1 : "" -- globale property msg90 : "" -- globale property msg91 : "" -- globale -- property msg92 : "" -- globale property msg94 : "" -- globale property msg96 : "" -- globale property msg99 : "" -- globale property rapport : "" -- globale property dossierDeStockage : "" -- globale property dossierParDefaut : "" -- globale property localExport : "" -- globale property newExt : "" -- globale property newType : "" -- globale property isOs4 : missing value -- globale property isOs5 : missing value -- globale property theMenu : missing value -- globale property menuExport : missing value -- globale property types : {{"doc", "SLDocumentTypeMSWord", 2}, {"pdf", "SLDocumentTypePDF", 1}, {"txt", "SLDocumentTypePlainText", 4}, {"rtf", "SLDocumentTypeRichText", 3}, {"rtfd", "SLDocumentTypeRichTextBundle"}, 3} --===== (* our settings *) property typeNum : 1 (* 1 = WORD, 2 = PDF, 3 = Txt, 4 = rtf, 5 = rtfd *) property theButton : missing value (* 1 button PDF 2 button Word 3 button RTF 4 button Standard *) --===== on run (* lignes exécutées si on double clique sur l'icône du script application • lines executed if one double click the application script's icon *) tell application "System Events" to set dossier to choose folder (* dans un bloc System Events pour avoir un titre de dialogue "localisé" • in a System Events block to get a localized dialog title. *) my commun({dossier}) -- my commun({"Macintosh HD:Users:yvan_koenig:Desktop:for_see:" as alias}) end run --===== on open (sel) (* sel contient une liste d'alias des éléments qu'on a déposés sur l'icône du script (la sélection) • sel contains a list of aliases of the items dropped on the script's icon (the selection) *) my commun(sel) end open --===== on commun(elems) my nettoie() my prepareMessages() tell application "System Events" if not (UI elements enabled) then set (UI elements enabled) to true (* Active le GUI scripting • Enable GUI scripting *) set titres to title of processes end tell -- to System Events if theApp is not in titres then my activateTheApp() (* Active et ferme la fenêtre du document créé à l'ouverture • Activate and close the doc's window created at opening *) set {newExt, newType, theButton} to item typeNum of types (* item 1 = {"doc", "SLDocumentTypeMSWord",2} item 2 = {"pdf", "SLDocumentTypePDF",1} item 3 = {"txt", "SLDocumentTypePlainText",4} item 4 = {"rtf", "SLDocumentTypeRichText",3} item 5 = {"rtfd", "SLDocumentTypeRichTextBundle",3} *) set sysAtt to (system attribute "sys2") if 4 > sysAtt then if my parleAnglais() then error "This script requires MacOs X 10.4 or higher !" else error "Ce script requiert MacOs X 1.4 ou ultérieur !" end if else if 5 > sysAtt then set isOs4 to true set isOs5 to false if my getVersion() < "4" then set theMenu to 3 set menuExport to 13 else set theMenu to 10 set menuExport to 9 end if else if 6 > sysAtt then set isOs4 to false set isOs5 to true if my getVersion() < "4" then set theMenu to 3 set menuExport to 13 else set theMenu to 10 set menuExport to 8 (* was a wrong 9 *) end if else set isOs4 to false set isOs5 to false if my getVersion() < "4" then set theMenu to 3 set menuExport to 13 else set theMenu to 10 set menuExport to 8 (* was a wrong 9 *) end if end if my fermeFenetres() (* • Close existing windows *) my afficheLeMessage(msg1) (* Éviter de cliquer… • Don't click… *) tell application theApp to set localExport to localized string "Export" set dossierParDefaut to my getDefaultExport() as text set rapport to "" set dossierDeStockage to my creeDossierDeStockage(nom_du_dossier) (* Unicode text *) try repeat with elem in elems try my exploreTraite(elem as alias, "") end try end repeat if rapport = "" then set rapport to msg90 -- crée un fichier texte sur le Bureau set p2d to path to desktop set p2r to (p2d as Unicode text) & nomDuRapport tell application "System Events" if exists (file p2r) then delete (file p2r) make new file at end of p2d with properties {name:nomDuRapport} end tell set rapport to rapport as text write rapport to (p2r as alias) on error MsgErr number NroErr if NroErr is not -128 then beep 2 tell application (path to frontmost application as string) to ¬ display dialog "" & NroErr & " : " & MsgErr with icon 0 buttons {msg99} giving up after 20 end if -- NroErr is… return end try my nettoie() if my parleAnglais() then my afficheLeMessage("Export done.") else my afficheLeMessage("Traitement terminé.") end if end commun --===== on nettoie() (* pour ne pas stocker dans le fichier script • So it will not be stored in the script file *) set dossierDeStockage to "" set dossierParDefaut to "" set rapport to "" set localExport to "" set newExt to "" set newType to "" set isOs4 to missing value set isOs5 to missing value set theMenu to missing value set menuExport to missing value set theButton to missing value set msg1 to "" set msg90 to "" set msg91 to "" set msg92 to "" -- set msg94 to "" set msg96 to "" set msg99 to " " end nettoie --===== on afficheLeMessage(m) beep 1 tell application (path to frontmost application as string) activate if my parleAnglais() then display dialog m buttons {" OK "} default button 1 giving up after 10 else display dialog m buttons {" Vu "} default button 1 giving up after 10 end if end tell end afficheLeMessage --===== on creeDossierDeStockage(Nom) (* S'il n'existe pas, construit un dossier destination sur le bureau ou dans "~/Documents" • If does not exist, create a destination folder on the desktop or in "~/Documents" *) local dd, dds if storeOnDesktop is true then set dd to path to desktop as Unicode text else set dd to path to documents folder as Unicode text end if if Nom ends with ":" then set dds to dd & Nom else set dds to dd & Nom & ":" end if (* dossierDeStockage n'existe pas, on le crée • dossierDeStockage is not available, build it *) tell application "System Events" to if not (exists item dds) then make new folder at end of folder dd with properties {name:Nom} return dds as Unicode text end creeDossierDeStockage --===== on exploreTraite(elem, ptree) (* elem est un alias • elem is an alias *) local elem_, cl_, type_Id set elem_ to elem as Unicode text tell application "System Events" to tell disk item elem_ set cl_ to class if cl_ is folder then set type_Id to "" else set type_Id to type identifier end if end tell -- "System Events" set cl_ to cl_ as Unicode text if type_Id is in {"com.apple.iwork.pages.pages", "com.apple.iwork.pages.sffpages"} then (* C'est un fichier Pages. • It's a Pages document *) my TraiteUnDocument(elem_) else if cl_ is in {"file package", "«class cpkg»"} then set rapport to rapport & msg91 & elem_ & return (* "Package", Attention, un package EST un dossier "spécial". • Caution, a package IS a "special" folder. *) else if cl_ is in {"folder", "«class cfol»"} then my ExploreUnDossier(elem_, ptree) else set rapport to rapport & msg92 & elem_ & return (* "Pas un document Pages". • "Not a Pages's document" *) end if -- typeId_ is … end exploreTraite --===== on ExploreUnDossier(dossier, ptree) local nomElement, cheminElement, c repeat with nomElement in list folder dossier without invisibles set cheminElement to dossier & nomElement tell application "System Events" to set c to name of (dossier as alias) my exploreTraite(cheminElement as alias, ptree & c & ":") end repeat end ExploreUnDossier --===== on TraiteUnDocument(leCheminOriginal_UniText) my export2Doc(leCheminOriginal_UniText as alias, leCheminOriginal_UniText) end TraiteUnDocument --===== on export2Doc(p, leCheminOriginal_UniText) (* • here p is the path as alias *) local flag, nom_de_p, nouveauChemin, w, bof, x, p_xport try tell application theApp open p set flag to false repeat 300 times (* Attends que le fichier soit réellement ouvert. • Wait until the file is really open *) if my getNbWindows() > 0 then set flag to true exit repeat end if end repeat end tell -- to theApp if flag is false then error number 8888 (* Le fichier n'a pu être ouvert. • The file can't be open. *) on error MsgErr number NroErr if NroErr = 8888 then set rapport to rapport & msg94 & leCheminOriginal_UniText & return else set rapport to rapport & "### " & MsgErr & " ### " & errNbr & return end if return (* can't do the remaining tasks *) end try tell application "System Events" to tell file leCheminOriginal_UniText set nom_de_p to name end tell -- System Events if nom_de_p ends with theExt then set nom_de_p to text 1 thru -(2 + (length of theExt)) of nom_de_p set nouveauChemin to dossierParDefaut & nom_de_p & "." & newExt --log nouveauChemin tell application "System Events" to if exists (file nouveauChemin) then set name of file nouveauChemin to nom_de_p & my horoDateur(modification date of file nouveauChemin) & "." & newExt (* name stamped *) try set {w, bof} to my getFrontWindow() tell application "System Events" to tell application process theApp click menu item menuExport of menu 1 of menu bar item theMenu of menu bar 1 (* Exporter… *) repeat until exists sheet 1 of window w delay 0.1 end repeat tell sheet 1 of window w (* sheet containing the buttons PDF, Word, RTF, Standard *) -- get properties of UI elements of radio group 1 if isOs4 then click button theButton of radio group 1 else if isOs5 then click checkbox theButton of radio group 1 else click radio button theButton of radio group 1 (* I hope that they will no longer change it *) end if -- isOs4 is true (* if typeNum is 2 then delay 0.2 tell pop up button 1 click click menu item quality of menu 1 end tell delay 0.2 end if *) click button 1 (* Suivant… *) repeat until exists button localExport delay 0.1 end repeat click button localExport (* Exporter… *) end tell -- to sheet… repeat 20 times if exists sheet 1 of window w then click button 2 of sheet 1 of window w (* "Ne pas consulter " dans éventuel rapport d'anomalies • "Don't review" in sheet reporting possible export anomalies *) exit repeat end if delay 0.1 end repeat end tell -- to process … System Events if dossierDeStockage is not dossierParDefaut then (* we must move the file from folder dossierParDefaut to folder dossierDeStockage *) set p_xport to dossierDeStockage & nom_de_p & "." & newExt tell application "System Events" to if exists (file p_xport) then set name of file p_xport to nom_de_p & my horoDateur(modification date of file p_xport) & "." & newExt tell application "Finder" to duplicate file nouveauChemin to folder dossierDeStockage (* • before 10.5, System Events is unable to move *) my wait4File(p_xport) tell application "System Events" to if exists file nouveauChemin then delete file nouveauChemin end if -- dossierDeStockage is not… my ferme1fenetre() on error errMsg number errNbr set rapport to rapport & msg96 & p & return & errMsg & " ### " & errNbr & return end try end export2Doc (* ===== • Build a stamp from the modification date_time *) on horoDateur(dt) local annee, mois, jour, lHeure, lesSecondes, lesMinutes set annee to year of dt set mois to month of dt as number (* existe depuis 10.4 *) set jour to day of dt set lHeure to time of dt set lesSecondes to (lHeure mod 60) set lHeure to round (lHeure div 60) set lesMinutes to (lHeure mod 60) set lHeure to round (lHeure div 60) return "_" & annee & text -2 thru -1 of ("00" & mois) & text -2 thru -1 of ("00" & jour) & "-" & text -2 thru -1 of ("00" & lHeure) & text -2 thru -1 of ("00" & lesMinutes) & text -2 thru -1 of ("00" & lesSecondes) (* • Here, the stamp is "_YYYYMMDD-hhmmss" *) end horoDateur (* ===== • Take care, the front window may be an Inspector or a dialog one. *) on getFrontWindow() local namesOfWindows, w, flag tell application theApp to activate set flag to false tell application "System Events" to tell application process theApp set namesOfWindows to name of every window repeat with w in namesOfWindows if subrole of (get properties of window w) is "AXStandardWindow" then set flag to true exit repeat end if end repeat end tell return {w, flag} (* • w is the name of the front document's window *) end getFrontWindow (* ===== • Wait that the file is completely written on disk *) on wait4File(p) (* • p must be Unicode text *) local oldSize, nnn, newSize set oldSize to 0 tell application "System Events" to set nnn to name of file p repeat try tell application "System Events" to set newSize to physical size of file p if oldSize < newSize then set oldSize to newSize else exit repeat end if end try end repeat end wait4File --===== on activateTheApp() local bof, status tell application theApp to activate if my getStartingStatus() is false then tell application "System Events" to tell application process theApp to keystroke return repeat set {bof, status} to my getFrontWindow() if status is true then exit repeat end repeat end activateTheApp (* ===== • Close existing open windows *) on fermeFenetres() repeat while my getNbWindows() > 0 my ferme1fenetre() end repeat (* • Now there is no open window *) end fermeFenetres --===== on ferme1fenetre() tell application theApp to activate tell application "System Events" to tell application process theApp to keystroke "w" using {command down} end ferme1fenetre --===== on getPlistValue(valName, default) local thePlist, u set thePlist to (path to preferences folder as Unicode text) & "com.apple.iWork." & theApp & ".plist" tell application "System Events" if exists file thePlist then tell contents of property list file thePlist try set u to (value of property list item valName) (* Unicode Text *) on error (* On est là si Pages n'a rien enregistré avec des préférences neuves • Here if Pages never saved with the new preferences file. *) set u to default end try end tell -- to contents of… else (* On est là s'il n'y a pas de fichier de préférences • Here if there is no preferences file. *) set u to default end if end tell -- to system events return u end getPlistValue --===== on getStartingStatus() return my getPlistValue("LSDefaultsUseDefaultStartingPoint", false) end getStartingStatus --===== on getDefaultExport() local u (* son of a *****, I forgot that they don't use the same name !! *) if theApp contains "Pages" then set u to my getPlistValue("SLDocumentDefaultExportDirectory", "~/Documents") else if theApp contains "Numbers" then set u to my getPlistValue("LSDocumentDefaultExportDirectory", "~/Documents") else error "I didn't coded a Keynote version !" end if set u to (POSIX file (do shell script "echo " & u)) as text if u ends with ":" then return u else return (u & ":") end if end getDefaultExport --===== on getNbWindows() tell application "System Events" to tell application process theApp to return count of windows end getNbWindows --===== on getLocale(a, x) tell application a to return localized string x end getLocale --===== on getVersion() try tell application theApp to return version on error return "1" end try end getVersion --===== on parleAnglais() local z try tell application theApp to set z to localized string "Cancel" on error set z to "Cancel" end try return (z is not "Annuler") end parleAnglais --===== on prepareMessages() if my parleAnglais() then set msg1 to "Don’t click when the script is running." & return & "Except, of course, if it ask for." set msg90 to "No problem during the export process." set msg91 to "Package" set msg92 to "Not a " & theApp & "’s document" -- set msg94 to theApp & " can’t read it" set msg96 to "Not copied." set msg99 to "Oops" else set msg1 to "Éviter de cliquer durant l’exécution du script" & return & "sauf s’il le demande." set msg90 to "Exportation réussie sans incident." set msg91 to "Package" set msg92 to "Pas un document " & theApp -- set msg94 to theApp & " n’a pas pu le lire" set msg96 to "Pas copié." set msg99 to " Vu " end if set msg91 to "### " & msg91 & " ### " set msg92 to "### " & msg92 & " ### " -- set msg94 to "### " & msg94 & " ### " set msg96 to "### " & msg96 & " ### " end prepareMessages --===== --[/SCRIPT]

Try this app: http://tyorex.com/iWorkConverter
Batch convert Pages files to doc and pdf.

Just purchased a ipod and trying to import my music collection. When I have imported some artist have duets with others and those are going in seperate folders not the same as the artist. How can I put all the music in the same folder

have alot of music to import and some of the artist are not in the same folder. like elton john who has duets with others. is there anyway to put all the music in same folder and not have several folders for same artist

If you right click on a son in iTunes and click Get Info. Under the Sorting tab iyo can change how the songs is sorted in iTunes
Tips for using song and CD info to organize your music
You can edit information in the Info window to make it easier to find and sort items in your library. For example, you can:
Group individual movements on a classical CD into one work by indicating the name of the work (for example, “Piano concerto in A Minor, Op. 54”) in the Grouping field.
Group songs that are part of a compilation together in your library by clicking Details and selecting the checkbox next to “Album is a compilation of songs by various artists”.
Identify the individual artists on a tribute album in the Artist field, and type “various” in the Album Artist field.
Create your own genre category by clicking Details and typing the category in the Genre field.
Change the order in which tracks on a CD play by changing the numbers in the Track fields.
Create a Smart Playlist that includes only songs that are just the right speed for your workout by typing the number of beats per minute in the BPM field. For instructions, see Create a Smart Playlist.
Identify a movie as a music video (click the Options button, and choose Music Video from the Media Kind pop-up menu).
Identify an item that you imported from a CD as an audiobook, so it appears under Audiobooks instead of Music (click the Options button and choose Audiobook from the Media Kind pop-up menu). If you do this, iTunes also remembers your place in the audiobook.
Enter custom sorting criteria for an item. Select the item, choose File > Get Info, click Sorting, and enter the custom text.
Does the non-syncing songs play in iTunes on the computer?
is there anything different about the songs that do sync and those that do not? Like where they cam from? The format (Get Info>under the File tab).

Email sent on my iphone 5 does not show in the sent folder in mail on my macbook pro and vice versa especially since update to Yosemite

I have an iphone 5 and a Macbook pro. Since upgrading to Yosemite, when I send an email from my yahoo email account or another email account linked to my website, on my iphone, the emails don't show in the sent folder in mail on my macbook pro and vice versa.
I have deleted the accounts and re-created them on both my iphone and macbook pro but the samething keeps happening.
When last I was at the istore, they were unable to sort it out and said I needed to book it in.
Any suggestions that will prevent me from booking my macbook pro in are welcome.

Hi,
Are you saying you are trying to synch iMessages across two iPhones ?
Or do you mean you are trying to get iMessage that were synced to one iPhone to show on another ?
Whilst the first is possible - from the date you add the second iPhone the second is not possible.
10:11 PM Saturday; January 5, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Multiple files with the same file name within the same folder

It looks like a finder bug. To replicate, I surf to any website, I right-click on a jpg image, select "Save Image As" and in the window that pops up I type in the filename "000.jpg", I select the folder Pictures, and click on Save.
BTW, I don't know why, but the file was saved only as "000" without the file extension ".jpg". Does anybody know why?
Then I surf to another image, and again I save it as "000.jpg" and now it asks me if I want to replace the existing filename, although the existing one is "000" and I try to save as "000.jpg", so I say yes, and then magically the file is saved with the full filename including the extension "000.jpg"
When I did it a couple of times, always saving image as "000.jpg" from various sources, I ended up with two distinct files named "000" and both in the same folder Pictures.
Please advise.

Misio wrote:
It looks like a finder bug. To replicate, I surf to any website, I right-click on a jpg image, select "Save Image As" and in the window that pops up I type in the filename "000.jpg", I select the folder Pictures, and click on Save.
BTW, I don't know why, but the file was saved only as "000" without the file extension ".jpg". Does anybody know why?
the extension is simply hidden. go to the get info panel for the file and uncheck the option to hide the extension.
Then I surf to another image, and again I save it as "000.jpg" and now it asks me if I want to replace the existing filename, although the existing one is "000" and I try to save as "000.jpg", so I say yes, and then magically the file is saved with the full filename including the extension "000.jpg"
When I did it a couple of times, always saving image as "000.jpg" from various sources, I ended up with two distinct files named "000" and both in the same folder Pictures.
Please advise.
it sounds to me like you saved one file as 000.jpg and the other and 000.jpg.jpg.
check the info panels for the files for full names to verify if this is the case.

How can I make move podcasts to the same folder?

I want my "RadioLab" and "This American Life" audio podcasts to show up in the same folder. I want this because when I plug my iPod into my car radio the next button in my car stereo will advance to the next iPod cast of the series, but it will not advance to the next series, for example it will advance through all the RadioLab podcasts, but when it gets to the end it jumps back to the begining, it will not advance to the This Anerucan Life series.

You can make a smart playlist containing episodes of both series and play from that. Podcasts are linked together by the URL they are served from so merging ongoing series isn't really practical.
tt2

How to have projectname_edge.js in a subfolder? (not in the same folder as the project file)

Hello,
Is it possible to have the file projectname_edge.js in a subfolder? Not in the same folder with projectname.html.
It seems that edge.5.0.1.min.js looks for dependencies only in the same place as the main file of the project. Moving projectname_edge.js to other folder (js, script, etc) causes the animation not to run. Can I store it in different folder? I would like to put it into "Content" or "Scripts" folder on the server.
I am trying to integrate edge animation into ASP.NET MVC application, and I do not have any index.html file. I am inserting the  section into the view (the .cshtml file stored in subfolder). Having the projectname_edge.js in the main server path require to deal with security settings, so I would like to put it in 'Scripts'.
I found the video showing the solution for the older API: http://www.edgedocks.com/content/edge-animate-publish-files-and-js-folder but it is no longer valid with Edge 5.0 API
Any ideas how to achieve this?
Thank you in advance!
Eric

Thank You! This is exactly what I looked for!
Additionaly having runtime projectname_edge.js in htmlroot in ASP.NET MVC website, is slowing down the animation show up. Now (with subfolder) it working fast and fluid
Many, many thanks!

The ipad won't sync some photos, saying the file can't be read by the ipad, however it will sync some photos taken at the same time which are the same size and file type. Why does it reject some and accept others?

The ipad won't sync some photos, saying the file can't be read by the ipad, however it will sync some photos taken at the same time which are the same size and file type. Why does it reject some and accept others?

Hi there. I'm having the same problem: my iPad won't import some photos from a folder, saying that they can't be read. They are all JPEGS and some photos taken at the same time have synched fine, but out of a folder with 200 photos, it only lets me synch 37. I'm synching albums created via Photoshop Elements 6, which has worked fine until now.
I've tried deleting all photos and re-synching, and have also deleted the iPod Photo Cache, but it hasn't made a difference.
The iPad auto-updated to the latest version of iTunes, so maybe that's what's causing it?
Any advice gratefully received!

Synced (named) TV Shows in the same folder on iPhone 6 Plus

Similar Messages

Maybe you are looking for