Synch access from CUA to CRM
Good morning (or afternoon as the case may be)!
I have an exciting opportunity in my CUA to CRM relationship. We recently scheduled background jobs to process USERCLONE IDOCs from CUA in our CRM system. Well, there were about 2000 ancient, unprocessed IDOCs that got processed the first couple of days the job ran. YAY!
So now I have users with access in CRM that is not the same as what our CUA system says they have. Is there any way to do a mass update from CUA to CRM to synch up those users? I saw that I could synch role assignments from CRM to CUA in SCUG, but I want to do it the other way around.
Thanks!
Krysta
I just answered my own question! The new search on SAP's support portal is pretty cool now that I'm starting to use it.
There is a report in the CUA system, RSCCUSND, that you can run to push master data including role assignments out to a child system. Perfect!
Krysta.
Similar Messages
-
Hello,
I am trying to integrate CUA into our GRC 10.1 system through the below steps and so far I have completed the below steps following SAP Notes 1680108 and 1616121:
1. Connected CUABOX to GRCBOX like a plug-in system.
2. Updated CUA Global System and CUA Model Distribution in Maintain CUA settings under User Provisioning.
3. Next I am trying to import the roles from CUA(CUABOX) into GRC(GRCBOX) to be able to provision roles in CUA Child Systems(ECCBOX).
After reading few discussions in SCN, I have figured that we have to download a template in Role Import and populate it accordingly to upload the CUA child system roles into GRC system for provisioning in CUA Child Systems.
Unfortunately, this template has multiple fields and I am unable to determine the fields that should be populated as CUA Global System and CUA Child System to import into GRC. Also, when we upload CUA Child System Roles template what selections should be made in Role Import window.
Any help in this regard is very helpful.
Thank you,
PawanHi Alessandro,
I have "Create user if does not exist" setting checked for both change action and assign role action and also have CUA enabled. Here is the list of steps that I am performing:
1. Create an access request for new account, T-CUA_CHILD and select a role from a child system ECC Z_ECC_ROLE_IN_CHILD_SYSTEM.
2. Approvals provided to assign the ECC role.
3. I see the following in GRFNMW_DBGMONITOR_WD.
Auto provisioning activity at end of request at Path GRAC_DEFAULT_PATH and Stage GRAC_SECURITY
New User:T-CUA_CHILD created in System(s): ECC (created without role assignments)
T-CUA_CHILD User does not exist in target system CUA
GRC created an account without role assignment in ECC but also throwed me an error that the user does not exist in CUA.
However, if I select roles from both CUA and ECC it creates the account in both systems with the selected role assignments.
So I am wondering if there is way to provide CUA access to users by default for new account requests types. I have tried setting up default roles for CUA but it does not assign the roles by default until I select the CUA system.
Thank you for your help!
Pawan -
Access DMS document throgh CRM
Dear Gurus,
Is it possible to access DMS document throgh CRM.
Is there any object available for CRM like customer compalints, Solution provided Excetra...,
Can any one share the doc for CRM-DMS object config.
Thanks in advance.Yes, but you need to create a RFC Connection between your CRM system and ECC6. SAP DMS itself is not available in the CRM system so the RFC connection needs to be in place in order to use it.
From the Help Files:
Integrating Product Lifecycle Management (PLM)
Usage
Integrating Product Lifecycle Management (PLM) lets you link documents from the PLM Document Management System (DMS) with documents from CRM such as contracts, opportunities, and activities.
Integration
To use PLM in CRM, you require SAP Enterprise Resource Planning (ERP) 4.70 and higher.If you want to use SAP EPR 4.6c, you require SAP Note 620160.
Prerequisites
You have maintained the RFC connections to PLM. For more information, see the Implementation Guide at Customer Relationship Management ® Basic Functions ® Content Management ® Maintain RFC Connections to PLM.
Features
Integration is only available for the People-Centric UI.
Change markings in PLM documents are not displayed in the PC-UI.
The following functionalities are available:
· You can use the PLM DMS to link PLM DMS documents directly to the following objects, or to delete the links:
¡ CRM business objects
If you assign a PLM document to a CRM business object, it appears in the PLM Documents folder.
¡ Sales contracts
¡ Sales documents
¡ Business partners
¡ Products
· Finding PLM Documents
You can also find PLM documents in CRM by the following properties:
¡ User-defined text
¡ Document number
¡ Document type
¡ Version number
¡ Status
¡ Description
¡ User
¡ Part
For PLM documents, the Creator field in CRM Content Management specifies the Person Responsible from PLM.
The full-text search only searches the document long text and not the content of the document itself .
There is only a full-text search in the document long text, not in the document content itself.
· Jump to PLM WebDocuments as of SAP ERP 4.70 -
hi everybody,please someone help me,i had a 3gs last year and i bought a 4,but itunes doesn't synch videos from photos file and it crashes,every time i try to synch photos it stacks when videos try to synch and crashes,what to do please?
hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo
-
Going to start implementation of CUA. Using our Solman system as the parent and R3, CRM and BW as the child systems. Before starting I already have questions with CUA to CRM because of customer accounts. Customers create accounts over our website. Employees create accounts for our customer through CRM web UI. BPs with Internet Users (SU01s) created in a number of ways. Will this still be able to continue or would I have to exclude CRM from CUA?
Also why in SCUM is "Everywhere" not option for everything It would be perfect to still be able to create and maintain any field locally if you wanted and still distribute from Parent for new accounts but looks like this can only be done for some fields and once turned on you can not create locally.
Thanks,
AlexTechnically the active CUA is not a restraint to create a user from other scenarios.
It works for identity federation and SAML tockens, so I assume that it is a config option on the CRM side?
If the CRM does not support this (which release are you on? 7.0?) then I would open a customer message with SAP.
If you wish, then I can also move this thread to the CRM forum. Unfortunately SDN forum software does not support "mirroring" threads to other related forums...
So... yes it is possible, but I am not sure whether your UI supports it.
Cheers,
Julius -
Downloading Pricing condition records for products from ECC to CRM
Hi All,
I have a requirement where i need to download condition records for products from ECC to CRM. The Inputs available for me are Product Id or the material number and the Sales org data.Kindly let me know the step by step procedure that i should follow to download the condition records for the products.
Note: 1. The Products are already in the CRM system.
2. I have downloaded the adapter object "DNL_CUST_CNDALL" already.
Thanks & Regards,
Shwetha.First of check and ensure that if the records are already downloaded. To do so,
1) Log to ECC system and go to tcode V/06
2) From here select the condition type you are looking at. Dbl click on the condition type and note down the access seq.
3) Go to V/07. seelect the access seq you obtained in previous step and dbl click on "Accesses". Here you will come to know the condition table numbers. Note down the table numbers. (example: 002, 567)
Understand at this juncture that tables from 1-500 are SAP Standard tables and 501 - 999 are customer specific tables.
1) Log to CRM system and go to se16
2) Type CNCCRMPR002 or CNCCRMPR567 and Choose F4 from keyboard.
3) you should find an entry which looks like CNCCRMPRSAP002 or CNCCRMPRCUS567.
4) query the table with input parameters like Product or Sales Org. YOu should find the records.
If you fail in step 3, it means that the table itself has not come to CRM. For this do DNL_CUST_CNDALL with OPEN client (go to SCC4 and there Dbl clik on your client. There "NO CHANGES ALLOWED" should not have been selected. If it is so, consult your basis team and explain that DNL_CUST_CNDALL should be done on open client.(Repeat this even if you have already done that)
If you fail in step4, try downloading DNL_COND_A*** adapter Objects. *** stands for the ECC condition table captured from ECC (step3)
If you still are unable to find the record in the database table level, Check for the log in SLG1 tcode in CRM system. This gives you an idea of what's wrong.
Note: Even if you maintain conditions via Product master, ultimateley it gets stored in A* tables in ECC and CNCCRMPR* tables in CRM. So the above procedure holds good for whatever the case might be.
Hope this helps
Regds,
Raghu -
Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.3.1.55
Application Timestamp: 4deec351
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7ba58
Exception Code: c0000005
Exception Offset: 0002e3fb
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
Any suggestions?I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up again as soon as I click on the "Synch photos from" button. -
Unable to open URL attachment from SBWP in CRM WEB UI
Hello Gurus,
Need your help please. I'm having some problem opening the URL attachment from SBWP via CRM 7 WEB UI (I used a Transaction Launcher for SBWP). The attachment is a Webdynpro application. I am able to open the attachment in SAP GUI, but not in CRM WEBUI. This problem occured when we update the SP level of CRM 7.
Here's the scenario,
- whenever I click the attachment, it open a new window, which also happen even before SP level update, with the following information:
Execute an Application on FrontEnd
Please wait. You will be forwarded automatically.
This page is included for technical reason.
Execute program.
Status: Displaying Office Document ..........
After a couple of seconds, it will return to the Workflow Workplace screen.
I have checked the workflow log and found no inconsistency on the attached URL.
Immediate response would be highly appreciated. Thanks in advance.
Regards,
EdwinThanks for the reply WD ABAP.
Yes, I did try to use the functionality of Worklist and the URL attachment successfully opened. However, there are some limitation in its functionality as indicated in the link below that opted us to use the SBWP in CRM WEB UI via transaction launcher.
http://wiki.sdn.sap.com/wiki/display/CRM/CRMWorklist-AdvancewithDialognotSupported
We don't want to adjust the logic of our existing workflow at this point as described in the above link as it will entails end-to-end testing again. We just encountered this issue when we update the SP level of CRM 7.
Hope there is an alternative solution without shifting us to Worklist.
Regards,
Edwin -
How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling? It is installed on my home network behind my TWC broadband router.
Ok.. since the TWC modem is also a router.. all configuration takes place on this box.. NONE whatsoever takes place on the TC.
There is no airport utility 7.7.3 but there is a firmware of that number for the latest AC model TC..
Is it tall like this.
Then it is Gen5.
otherwise it will have a firmware.. 7.6.4 or earlier and the airport utility must be 6.3 or earlier.
Open the Airport utility and give us a screenshot of the summary page.
That will also help us determine that you have the TC, which version and how it is setup.
You might want to press the edit and also give us the Internet and Network tab as they should be set correctly as well.
I have created a DDNS through DYN.com although I am not sure how to implement this into the TC.
You do not do anything in the TC.. set it up in the Ubee router.
Port forward 548 to the TC in the Ubee router.
And make sure the TC has a static IP in the Ubee router.
Overall if you find this too hard I strongly recommend you buy a product designed for remote access .. eg WD MyCloud.. they are cheap and easy peasy to setup for remote access.. by PC or Mac and since it is built outside of Apple you not bound up in Apple limitations built into all their equipment to prevent you using it the way you want.. rather than apple want you too.. eg BTMM and iCloud being the only way apple provide for access to the TC and only when it is the main router of the network.
You are fighting hard because Apple made this hard.. not easy. -
Upload data from excel to crm using BDOC possible or not
Hi all,
I need to upload data from excel to crm(opportunity management) .is it possible using bdoc or not. Please provide the list of methods to upload data from EXCEL and also provide the best method for this scenario .BDocs are used to transfer data from one SAP system to another like from CRM to ECC or R3.
If u want to upload data from excel to CRM, this can be done with the help of idocs and not bdocs (method 1 - using LSMW).
Take help of a crm technical consultant and define lsmw projects. The project will take care of field mapping and conversion. Once that is done, 4 steps need to be done.
1. Read data
2. Convert data
3. Generate idocs
4. Post idocs
Once the posting of idocs happen error-free, the data will be available in crm system.
Another method will be using transaction SECATT.
Here u can define test scripts and record what all activities are done in a transaction. Then define ur test configs which will contain the excel sheet data and then upload the data.
Reward with points if this helps. -
I've recently gotten a new laptop and replaced my damaged iphone. Apparently these 2 scenarios qualify as "new devices". This is fine but I also had lost my credit card previously that was connected to my iTunes account, and got a new one with all different numbers. When I try to change my billing information to this new card it won't let me because it says
"Your account has been accessed from a new device, and you must verify your payment information before you can make purchases."
and it asks for the security code of the card I had lost and replaced! I am not able to change my billing info to my new card thus because I can't get past this.
Can anyone please help?Contact iTunes Customer Service and request assistance
Apple Support iTunes Store Contact Us -
I have an iTunes account where I have downloaded Digital movies & I am able to see the list on the desktop of the original downloads. When I log on another device with my login I do not see my list to access them. Why can't I access from another device
Hey GingCarv,
Great question. You'll want to download the movies from your purchase history. The following article explains how to do so:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Note: At this time, movies are not available for automatic downloads.
Thanks,
Matt M. -
Read-only file access from network volume
I get an read-only file access from network volume problem while sharing a drive from Snow Leopard to a Tiger install. Most of files were opening well, but *.fp7 (FileMaker) and *.xls (Excel) files won't open dealing with a read-only error.
As descibed in the last post of http://discussions.apple.com/thread.jspa?threadID=1406977 the client have the same share name of the server. Renomming it resolved the error!
Thanks!right then, as it looks like I'm talking to myself....
I have just wiped clean the Macbook Pro.
I installed Leopard from scratch, then installed Office 2008.
Logged back onto the network share, and the read-only error came up again, ONLY in Excel.
bugger.
Did the same thing with my Macbook and all is fine.
Copy the file to the local hard drive, opens ok.
I then copied the file to another Mac on the network.
mmmm, opens fine.
what's the difference....
mmmm, the machine it opens fine from is running 10.4
the machine which hosts all the data is running 10.3.9
could this be the problem.
Just done a software update check on the 10.3 machine and there are some security updates that need doing.
Going to run that now and see what happens, otherwise I think the iMac running 10.3.9 is going to need to come up to 10.4 and fingers crossed this will solve it. -
Hello All,
we have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc.
from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when we are trying to access the share folder with IP it asking for credentials i have type again and again
correct credential but unable to access that. If i re-share the folder then we are access it but when we are restarted the system then same problem is occurring.
I have checked IP,DNS,Gateway and more each & everything is well.
Pls suggest us.
Pankaj KumarHi,
According to your description, my understanding is that the same shared folder can be accessed by name, but can’t be accessed be IP address and asks for credentials.
Please try to enable the option below on the device which has shared folder:
Besides, check the Advanced Shring settings of shared folder and confrim that if there is any limitation settings.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Is there a way to play an mp4 file at the beginning of a published project only when the project is accessed from a specific site?
A little background info. I use Captivate 7 and currently have over 100 projects that I maintain on a quarterly basis. I publish using the SWF format and upload the swf/htm files to a server where they are then accessed from a few locations (within our online documentation, in our software product, on two different websites). Many of the projects are linked so some will be viewed as a series and others viewed as a standalone video. Each video uses the same template and includes an intro and end slide. Now my organization wants to implement a new intro to all videos (those I publish and those from several groups across the organization). My current intros provide overview material for the specific video so the new intro, which is an animation with audio in mp4 format, would need to be placed at the start of each project. The issue is, the intro adds 9 seconds to every video and in many cases doesn’t add any value (say, if a user accesses the video from within our product or views the videos as a series). I’ve talked it over with my boss and we want to try to add the intro only to videos accessed from site X, not any other location. So now to my question. Is there a way to play an external mp4 file (intro) only when the published project is accessed from a specific site, therefore eliminating the need to update each project? Maybe there's a way to add a parameter or variable to the URL or the html code?
Thanks in advance for your suggestions. Please let me know if you need additional information.AimeeLove,
I have a solution for you. You may have to modify the code a little bit based on how long the timeline animation is for your clock. I based mine on 3 seconds to complete a minute hand sweep around the clock.
Milliseconds for each point on the clock:
12 = 0
1 = 250
2 = 500
3 = 750
4 = 1000
5 = 1250
6 = 1500
7 = 1750
8 = 2000
9 = 2250
10 = 2500
11 = 2750
In the mouseover section for 12 o' clock, put this code...
myVar = setInterval(function(){
var pos = sym.getPosition();
if (pos > 0 && pos < 50){
sym.stop(0);
clearInterval(myVar);
},10);
When you point to the time, the setInterval method loops every 100th of a second and checks the current position of the timeline. When the timeline reaches the range between 0 and 50 milliseconds (almost impossible to hit 1 specific point), the timeline will stop at 0. Also, the clearInterval will be fired to stop the loop.
In the mouseout section, put this...
sym.play();
clearInterval(myVar);
It start the clock again, and it also clears the loop in case you mouseout before you reach the range.
Make sure that myVar is a global variable so you can clear it from the mouseout section.
Repeat this for each point on the clock. To avoid potential conflicts, you may want to use my12, my1, my2, etc. instead of myVar. I put the milliseconds at the top that you would use as the beginning of the range. 50 milliseconds should be enough to catch it. So, for 5 o' clock, you would make your range between 1250 and 1300.
Let me know if you have any questions. Thanks!
Fred
Maybe you are looking for
-
Pls help me to automatically replicate data from database server to other server
i have one database which is in oracle running on NT platform..this database gets updated every min..automatically with the data comming from Global positioning system(GPS) there is another application wich is running on solaris platform NOw the prob
-
Suppressing a warning message in reports 10g
Hi All, I am getting REP-32751: Warning: Some text segments are missing warning message when ever i open a report and also while run the report in the browser. I am not able to find the missing text segments. Is there any way to suppress this warning
-
Publishing a form in Aplication Server 10g
Hello everyone... I'm new in Dev10g and all my experience has become from client-server technology. Saying that, anyone can explain to me how to publish a form in Aplication Server 10g and access it from any client? Thanx 4 all your help.
-
How do I deauthorize Creative Cloud on a machine?
I have purchased a new laptop and want to make it my second of two machines allowed to have Creative Cloud installed on it. What is the most effecient way to deauthorize/authorize my membership from one to another? Sorry Adobe, I Love You, but this e
-
Need download a complete iMovie HD 6 have a lot problem with my hd6. Mike