Synch Exchange Keychain Entry to Login Keychain Automatically

I wish there was a Keychain Access preference that would enable me to tell a Keychain entry from an application to synchronize with the Login Keychain password automatically when changes occur.
This would fix so many problems I have with my Mac users. We use Exchange for mail and such. When Active Directory expires an account password, and the AD password is updated, then I wish the Mac Keychain would have this "magic" -- first to update itself to the new login password ---then go look for other applications that USED login credentials and update those as well.
I know about editing Keychain entries manually and I know about how to delete the Login KeyChain Files and References.
I know about changing network account passwords from System Preferences/Accounts. When done, you still have to manually edit the Exchange Keychain entry from Keychain Access.
Apple needs to improve its implementation of Active Directory to extend to application entries inside Keychain Access.
Do you guys know of any software that fills these gaps?
Scripts?
Thanks

So what you're saying is that it falls back on Microsoft to further improve Entourage to include SSO Exchange authentication?
Is there nothing I can do until then?
I wish I knew how other Mac managers have handled Exchange/AD password issues. Macwindows.com is somewhat vague in this regard.
All I can do is to continue to educate my users in how to manually control their network credentials. Most of them are okay with Exchange/AD. It becomes a chore for some. For a few I have to "hold their hand" -- guide them through it almost every day.
I find this dilemma most annoying.
Thanks for your input.

Similar Messages

  • Exchange Fluctuation Entry for Segment account in SAP

    Dear All,
    I have  created segment account for two branch in SAP
    for each branch we are maintain  foreign exchange gain and loss account seperatly.In SAP, only two account can be mapped  in GL determination for only one branch.
    How to account exchange
    fluctutaion entry for both branch.
    thanks
    Regards.
    Sridharan.R

    Hi,
    As on one account can be defined as Exchange rate gain/loss account to book the exchange fluctuations, you can try the option of manually transfering the relevant balance from the G\L which has been defined as default to the other G\L Account to book for the other branch transactions.
    Check if this workaround helps.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • Work Flow EVENT - SM58 Entries are not executing automatically

    Hi Experts,
    I have used the standard BOR2034 for creating PO after saving the contract.
    I have developed an RFC enabled FM refering to the Standard FM SWW_WI_CREATE_VIA_EVENT.
    Inside the custom FM I am calling the BAPI_PO_CREATE1 for creating PO.
    After creating a contract using VA41 I am able to see in Event trace that my Event with corresponding custom FM is triggering.
    and the two entries are created in SM58 - Transactional RFC one is my Custom FM name and another is SWF_EVT_HANDLER_START_INTERNAL.
    When I execute the LUW by selecting execution, PO is getting created. Where as this entries are not picking automatically.
    I want to know, whether I have missed any step in process or do we need to schedule any job for automatically clearing the SM58 queue entries.
    Please help me in resolving the issue.
    Responses are highly appreciated..
    Warm Regards...

    Hi Natasha,
    As you say that you see the below entries in TRFC monitor, you need have a commit work after the below FMs are called(just one will do),
    the two entries are created in SM58 - Transactional RFC one is my Custom FM name and another is SWF_EVT_HANDLER_START_INTERNAL.
    How and from where are the above FMs called?
    Regards,
    Chen

  • How can I do for ESA work with token RSA, I mean when I entry the login the authentication with RSA

    Hi there,
    How can I do for ESA work with token RSA, I mean when I entry the login, the authentication ask me the token with RSA, Is it possible???
    Regards,

    Hello Miguel,
    RSA tokens are currently not supported for login, neither to the GUI/CLI or access to the spam quarantine. There is currently a feature request"Support SecurID via RADIUS" for the WSA, if you want you can open a ticket and have either add your company to that request, or have it extended for ESA as well.
    Hope that helps,
    Andreas

  • Keychain: Automatic share mounting

    Greetings!
    I want a specific share of my NAS to be mounted at the system startup. I mount it and enter the appropriate username and password and also put the tick to save to keychain option. Then I drag the icon of the share to the Login Items list at the Users pane of System Preferences and restart the system. After restart the system still asks me the username and password for the share.
    How can I properly setup Keychain to do the automatic share mounting?

    Mount the shared disk or folder you to access. Open System Preferences/Accounts/<yourname>/Login Items and click the '+' symbol. Click on the drop down menu at the top of the resulting window and go to the very top level of your Mac, in this case MacBook Computer. You should now have a window containing all the mounted volumes. Click on the triangle next to the share point you have mounted and select the folder you want to automount on startup and click Add.
    If this is a public shared folder then you should have no problems, if on the other hand it requires a username password in order access it then remember to add these to the keychain when you first mount it and before you add it to the login items

  • ICloud keychain automatically turn off

    Hi,
    I don't know why my iCloud keychain feature always automatically turn off after several weeks.
    I turn it on many times, it works properly. However after around 3 weeks, I go to Setting -> iCloud, and Keychain is always off.
    I turn it on again successfully but later it is automatically turned off.
    I happen to me like 4 times.
    This issue only happen after I upgrade to iOS 8. When I use iOS 7, this doesn't happen.
    So, is there anyone encounter the same issue like me? If you have solution, please give me advice.
    Thanks
    Khuong

    Mine turns off after a few hours, I've tried resetting iCloud keychain, turning off everywhere and re-enabling but on my iPhone 4s is wont stay on. I've raised a bug with Apple and waiting to see if it gets closed as a duplicate.

  • A form field (for a client fax number) on my own web site is remembering my email address used to log into the site. The usual clearing of the remembered entry works OK, but evey time I remember the login it automatically populates this one field with my

    The form where this happens contains an email field as well as a password field, so it does have both of the fields that are on the login page. It is used to modify the details of the user of our site and is accessed by the administrators, not the users themselves. To auto fill the fax field (which is named _fax) with my email address is very strange. If I log in as a different admin user then the email address I use to login appears in the field. The password field is also appears on the form and is being populated, presumably with my password. How can Firefox get it wrong and put an entry in a field with a different name, and why that field and not other empty fields on the form?
    == This happened ==
    Every time Firefox opened

    First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

  • Synching multiple calendar entries and not displaying events properly

    At my work we have Exchange 2003 and all the latest patches / service packs. We setup to synch via SSL on the device. Plus we use Outlook 2003 and 2007 in our environment. Email comes over although delayed at times and contacts, but the calendar is giving us the most issue. Here are the two problems:
    1. Synching is not fully talking to Exchange. We create a new calendar entry so that Outlook and iPhone show the event. We then delete it in Outlook and when it synch's it goes back to Outlook. We have even seen multiple events doubling up and trippling up. Anyone else have this issue and know how to fix?
    2. The calendar view is missing many appointments that I think I found a fix for in the discussion boards, but wanted to mention the two main areas we're having trouble with.
    For people who use the phone in an enterprise environment, what do you feel is the best configuration to use / setup process you followed to have the least amount of issues for the iPhone and using it not trough iTunes but synching via cell network?

    Open up Font Book and select all the fonts and try a "validate fonts."  You have a duplicate or corrupted font on your system.

  • DT message on login and automatic logout

    Hi,
    a user booted the Solaris 9 (SunBlade 150) and proceeded a normal login.
    The DT Message came saying to check /etc/hosts and other files, and
    did automatic logout. The /var/adm/messages entry is this:
    Jul 18 15:59:26 `hostname` dtsession[688]: [ID 684647 user.error] libtt[688]: libtt: startup_ttsession("ttsession -s -d :0") failed with code -1, see syslog
    No Syslog entry. The ~/.dt/startlog looks like:
    --- starting desktop on /dev/pts/2
    /usr/dt/bin/ttsession[444]: ttsession: Tooltalk magic cookie authentication failed due to TT_AUTHFILE_ACCESS.
    See system log file (/var/adm/messages) for details.
    /usr/dt/bin/ttsession[444]: child ttsession exited with status 1
    /usr/dt/bin/Xsession[757]: 425 Hangup
    X connection to :0.0 broken (explicit kill or server shutdown).
    X connection to :0.0 broken (explicit kill or server shutdown).
    It is happening only to this user. Does anyone have any idea how
    to correct that?
    Thanks a lot for any help ...

    In the user's directory, remove .TTauthority and .Xauthority. Check that .dtprofile is degault (may want to copy it from another user). I don't remember if you have to remove .ICEauthority as well. Then have the user log back in.

  • Exchange 2010 SP1 OWA login fail "The username or password you entered isn't correct. Try entering it again"

    I upgrade my Exchange ORG from Exchange 2007 to Exchange 2010 on Windows Server 2008 R2 and worked fine. After install Exchange Server 2010 SP1 have a problem with
    the Outlook Web App,  I cannot login an get this error:
     "The username or password you entered isn't correct. Try entering it again"
    1. Create 1 test user and all work, included the Administrator User.
    2. Reset users Password, verify clear check " User must change password at next logon"
    2. I set the OWA Authentication to Domain\user name and
    User name only, Doesn't work with both ways.
    also i tried this solution, but nothing....
    http://social.technet.microsoft.com/Forums/en/exchange2010/thread/961dbdd0-554f-4a75-a374-7ada899a2807
    Thank´s everybody por reply
    Bryan

    can you login using that user account using RDP to the Exchange serverRegards, Mahmoud Magdy Watch Arabic Level 300 Videos about Exchange 2010 here: http://vimeo.com/user3271816 Read pretty advanced Exchange stuff I post here: http://www.enowconsulting.com/ese/blog.asp, follow my blog: http://autodiscover.wordpress.com ,
    corp blog: http://ingazat.wordpress.com and if you Liked my post please mark it as helpful and accept it as an answer

  • What are the ways to reverse entry in tcode FB08 automatically ?

    Do We have any method to post the reverse entry in transaction code FB08 automatically ?
    I have to post the entry from my executable program.
    I tried using a BAPI, but that is not working out for me.
    guide me

    Try FM 'CALL_FB08'
    Svetlin

  • Exchange Rate Entry of goods from a Supplier Invoice Reserve

    Dear friends,
    I have a problem. Each time we generate the entry of goods pulling the information from the invoice of reserve from supplier or vice verse, it also pulls the exchange rate from the base document, that is, from the invoice of reserve. Our currency is Peruvian Nuevo Sol.
    For example:
    On October 09th 2011, we generate an invoice of reserve in EURO currency with an exchange rate of 3.925
    On October 14th 2011, we make the entry of goods into the system, either from the invoice or pulling it from the entry, with an exchange rate of EUR: 3.800.
    At the moment of the entry of goods, the Accounts Department informs us that the exchange rate should be the one from the entry (completely logical). If the entry is done on October 14th then the exchange rate should be the one from that same date.
    However, it doesnu2019t happen this way.
    The exchange rate is pulled from the base document, it means, the one generated on October 09th with an exchange rate of 3.925
    The worst of all is that I cannot modify the exchange rate. I donu2019t know if it is a problem of parameters or if thereu2019s any failure with this SAP version. We use SAP B1 8.8 SP:00 PL: 15 system.
    I need your help in this particular case.
    Kind regards,

    Thank you very much for your reply Gordon but does not generate accounting exchange rate difference. Accountants do not know if you win or lose by the exchange difference should exist.
    As explained to make the entry of goods in a different date is not generated difrencia change.
    Do not know if anyone has a similar case?
    regards,
    Jesus

  • Exchange Server 2013 ECP Login

    I am bit puzzled and frustrated with this issue I have in my lab.  I have exported my test mailboxes from my 2010 environment (other settings are minor and easily reproduced), and uninstalled 2010.  Next I went and installed 2013 RTM from TechNet.
    The first time I installed 2013 the install was successful, but when the ECP came up it was just a empty browser window - it would never display.  So I thought, maybe there was something left over from the previous 2010 server.  I blew away the
    OS (was 2008 R2) and built a clean 2012 server.  Installed all the Exchange 2013 prerequisites, extended the Schema and installed 2013 using all the defaults in the wizard.
    This time the the ECP login came up, but here is where it gets puzzling and frustrating.  I put my Admin credentials in (this account has all proper group membership that I'm aware of) and the screen goes blank for a second and then the OWA login is
    displayed.  The ECP never comes up again, just goes straight to the OWA login.  If I enter my credentials in the OWA login, the screen just flashes and the password field clears but doesn't login.
    I have tried uninstalling and cleaning up AD and reinstalling, but the same thing keeps happening.  I can't help but think it has something to do with permissions, but I'm not sure what that would be.

    So after a good bit of time looking for clues, I noticed that this pops up in the application log every time the screen flashes and the password field clears.  I really have no idea what this means or how to fix it - maybe a cert issue in IIS ?!?!
    Log Name:      Application
    Source:        MSExchange Front End HTTP Proxy
    Date:          11/6/2012 7:24:56 PM
    Event ID:      3
    Task Category: Core
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      servername.domain.com
    Description:
    [Ecp] An internal server error occurred. The unhandled exception was: System.Security.Cryptography.CryptographicException: Invalid provider type specified.
       at System.Security.Cryptography.Utils.CreateProvHandle(CspParameters parameters, Boolean randomKeyContainer)
       at System.Security.Cryptography.Utils.GetKeyPairHelper(CspAlgorithmType keyType, CspParameters parameters, Boolean randomKeyContainer, Int32 dwKeySize, SafeProvHandle& safeProvHandle, SafeKeyHandle& safeKeyHandle)
       at System.Security.Cryptography.RSACryptoServiceProvider.GetKeyPair()
       at System.Security.Cryptography.X509Certificates.X509Certificate2.get_PrivateKey()
       at Microsoft.Exchange.HttpProxy.FbaModule.ParseCadataCookies(HttpApplication httpApplication)
       at Microsoft.Exchange.HttpProxy.FbaModule.OnBeginRequestInternal(HttpApplication httpApplication)
       at Microsoft.Exchange.HttpProxy.ProxyModule.<>c__DisplayClassa.<OnBeginRequest>b__9()
       at Microsoft.Exchange.Common.IL.ILUtil.DoTryFilterCatch(TryDelegate tryDelegate, FilterDelegate filterDelegate, CatchDelegate catchDelegate)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchange Front End HTTP Proxy" />
        <EventID Qualifiers="49152">3</EventID>
        <Level>2</Level>
        <Task>1</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2012-11-07T01:24:56.000000000Z" />
        <EventRecordID>209382</EventRecordID>
        <Channel>Application</Channel>
        <Computer>servername.domain.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Ecp</Data>
        <Data>System.Security.Cryptography.CryptographicException: Invalid provider type specified.
       at System.Security.Cryptography.Utils.CreateProvHandle(CspParameters parameters, Boolean randomKeyContainer)
       at System.Security.Cryptography.Utils.GetKeyPairHelper(CspAlgorithmType keyType, CspParameters parameters, Boolean randomKeyContainer, Int32 dwKeySize, SafeProvHandle&amp; safeProvHandle, SafeKeyHandle&amp; safeKeyHandle)
       at System.Security.Cryptography.RSACryptoServiceProvider.GetKeyPair()
       at System.Security.Cryptography.X509Certificates.X509Certificate2.get_PrivateKey()
       at Microsoft.Exchange.HttpProxy.FbaModule.ParseCadataCookies(HttpApplication httpApplication)
       at Microsoft.Exchange.HttpProxy.FbaModule.OnBeginRequestInternal(HttpApplication httpApplication)
       at Microsoft.Exchange.HttpProxy.ProxyModule.&lt;&gt;c__DisplayClassa.&lt;OnBeginRequest&gt;b__9()
       at Microsoft.Exchange.Common.IL.ILUtil.DoTryFilterCatch(TryDelegate tryDelegate, FilterDelegate filterDelegate, CatchDelegate catchDelegate)</Data>
      </EventData>
    </Event>

  • Exchange Rate Type M getting updated automatically next day

    Hi ,
    We upload rate through t.code TBDM for MTRE exchange rate type but very next system  turn up same result for exchange rate type M
    For example
    Suppose today 09.09.2011 i upload rate only for MTRE exchange rate type for following currency
    AED                 EUR           MTRE04092011                   5.26447                                                          
    ANG                 EUR           MTRE04092011                   2.52369                                                         
    ARS                 EUR           MTRE04092011                   6.01392                                                      
    AUD                 EUR            MTRE04092011                   1.33905   
    latter on if check in TCURR table or OB08 tcode i will get below entry
    ExRt From To  Valid from Exch. Rate Ratio Ratio
    M    AED  EUR 05.09.2011   /5,26447    0     0
    M    ANG  EUR 05.09.2011   /2,52369    0     0
    M    ARS  EUR 05.09.2011   /6,01392    0     0
    M    AUD  EUR 05.09.2011   /1,33905    0     0
    MTRE AED  EUR 04.09.2011   /5,26447    1     1
    MTRE ANG  EUR 04.09.2011   /2,52369    1     1
    MTRE ARS  EUR 04.09.2011   /6,01392    1     1
    MTRE AUD  EUR 04.09.2011   /1,33905    1     1      
    my question how M is getting update.
    Regards
    Prakash Sharma

    Hi
    Here you need to concentrate on Direct or indirect quotation
    If you are using EUR to SEK (LC) - use direct quotation as 8.8307 1:1 relation
    If you are using SEK to EUR - use indirect quotaion as 0.1132 1:1 relation
    Pls let me know if you required further help
    Reg
    Vishnu

  • Mac OS X Mountain Lion Login fills automatically with "+" signs !?

    Hello everyone,
    since a few days i noticed that after im selecting my user account or the "other" account, + signs fill automatically the password box ! In my account i see the typical circles instead of the + . It seems that its adding thousands of characters until im trying to enter my password, then it stops.
    Did someone notice a similar behaviour on your Macs.
    PS:its not the keyboard stuck or anything, i only get this on first login, after signing off and selecting my account to sign in a second time everything behaves normal...very strange !

    Assuming it is not a keyboard issue...
    Try to safe boot by holding down the "shift" key after you turn the computer and keep it held until you see an apple logo, spinning gear and progress bar.  Using safe boot will take longer than a regular boot.
    Then navigate to /Library/Prefrences/ and remove the com.apple.loginwindow.plist and lockfile.  For good measure you can remove the com.apple.loginwindow.plist from the ~/Library/Preferences/ folder as well.  Then restart the computer.  If neither of those work, go back into safe boot and enable automatic logon in the Users & Groups.

Maybe you are looking for

  • Acrobat won't run: "open another product" message. Still won't run

    All, I successfully installed Acrobat as part of CS4 Web Premium on a win7 64-bit system. Every time I try to run any Acrobat function like printing to pdf, openong a pdf, for example, I get a message that Acrobat was installed as part of a suite and

  • F-32 residual payment is affecting my ageing report.

    When I am doing the residual payment using f-32 then we are getting two document generated out this, one for the incoming payment and the other for the balance amount as new invoice with new posting date, this is affecting my ageing report. For Examp

  • I get an error when I try to index the 11th excel worksheet

    I tried to access the 11th worksheet in an Excel Workbook. I try to access it by using  invoke method. When I do, I use an index of 11. My error code is  -2147352 which is "Invalid Index."

  • GWWS Server and Instance ID

    Hi all, Is it possible to get hold of the "GWInstance id" given in both the CLOPT and the deployment file from GWWS Plugin code? I guess I can use the MIB, but was is the class name and what service name should I call? .TMIB?? I think this is the fie

  • Lightroom 5 and location of photos

    Hi everyone..... I plan on buying Lightroom 5.  I have never used Lightroom before. I have limited space on my primary C: drive. However, I have 3 other drives in my computer where I keep my photos. When I install Lightroom and attempt to organize th