Synch-ing user libraries

Hi, posted this question earlier but I might not have been specific... here it goes again:
How do I synchronize two iTunes libraries?? I have two user accounts on my computer and each account individually adds files to the iTunes library. The files are being stored in a 'Shared Folder' and that's where my iTunes folder is stored, but the only way I can add files to my user account library is manually bring browsing through the 'add file' option in the file menu.
Is there anyway to update the library automatically when files are added under the other user account??
Thanks.

The files are being stored in a 'Shared Folder' and that's where my iTunes folder is stored,
Is the *iTunes folder* there or the *iTunes music folder*?
If the *iTunes folder* is there, start iTunes while holding the Shift key.
select *Choose exisiting library* and select the iTunes library.itl file in the iTunes folder in the Shared directory.
Quit iTunes and do the same for the other user.

Similar Messages

Synch'ing calendar between Outlook 07 and BB DTM 4.3 crashes DTM

Following problems with BB DTM not even running, clean install of BB DTM 4.3.025 now suffering repeated crashes when synch'ing the calendar between Outlook 07 (fully patched Vista) and my BB 8100... DTM dialog says "processing device calendar" when it crashes. Tried all manner of variation - limited date ranges, all dates synch, one-way synch, two-way synch,... crashes when dialog says "processing device calendar".
Anyone any clues?
Message Edited by mcurtiz on 04-08-2008 03:20 PM
Mark
Pearl 8100 & 8120 on Orange | 4.5.0.5.52
BB DTM 4.5.075
nc6220 Pen M | Vista Biz 6.0.6000.20752

I would enable advanced logging and see if you can nail down where the issue exactly is happening.
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB01451&sliceId=SAL_Pub...
OR
Try going into Backup/Restore - backup the device.
Go into Advanced and your device databases are listed on the right, highlight calendar and choose clear. It will wipe your calendar.
on the right hand window you should see the backup file you just created, highlight calendar and click on the arrow pushing it to the right window and back onto your handheld.
www.novawirelessconsulting.ca

JDeveloper & user libraries

Hello,
In a jdeveloper project I'm using jakarta poi (http://jakarta.apache.org/poi/) to generate microsoft excel files. The jar files are included in my project as user libraries.
If I run the application in the jdeveloper environment everything works well and I'm able to create excel files. But if I deploy the application to a standalone oc4j application server (using an ear-file after running the "create jnlp files for java webstart" wizard) and I try to run the application, it's not possible to write excel files (and I don't get any errors).
However, after a manual copy of the jakarta poi jar files to the "ext" folder of the jre installation on my system, the application runs smoothly.
So it seems that jdeveloper isn't including the imported jar files/user libraries in the deployment package.
Now, if I want to deploy my application to a group of users, I have to copy the jakarta jars to the correct folder on every client computer. If there's an update of the jars, I have to update every client computers as well. Is there a way to include the user libraries in the deployment files?
Kind regards,
Jeroen

So, how do you include user libraries for deployment? Importing the user libraries into the system libraries and then adding them in the contributors list of a War-file doesn't seem to work.

Where can I found User libraries to download?

hello,
I'm searching the lvwutil32 user library compatible with LabVIEW 8.5. Any inputs ?? plus if someone know where there's free user librarie to download it helps Thanks !!

You've posted to the Developers Seeking Employment board.
A search should have turned up this. You can also do a search for the dll but I attached it below. The NI site is filled with free code to download. could you be a lttle more specific on what you want.
Attachments:
LVWUtil32dll.zip ‏14 KB

Synch-ing calendar & BBerry

I've only had my Blackberry for 2 weeks, and even though I enjoy it, I'm frustrated that when I'm synch-ing my blackberry's calendar with Outlook in my computer, everything earlier than a month is deleted on my calendar. What I do to prevent with dynch-ing that parts of my "older" calendar is deleted? Please help! Thanx. De la Harpe

I would enable advanced logging and see if you can nail down where the issue exactly is happening.
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB01451&sliceId=SAL_Pub...
OR
Try going into Backup/Restore - backup the device.
Go into Advanced and your device databases are listed on the right, highlight calendar and choose clear. It will wipe your calendar.
on the right hand window you should see the backup file you just created, highlight calendar and click on the arrow pushing it to the right window and back onto your handheld.
www.novawirelessconsulting.ca

Restoring multiple users/libraries

Hi - my hard drive crashed and I was able to restore iTunes and re-synch my iPod under my user name. Before the crash, my iPod synched to my user account and my wife's iPod synched to her user account. We keep our music in a shared folder.
Now I am trying to point iTunes under my wifes user account to the shared folder and it is giving me an "access denied" error. She is set up as an Administrator (as I am) and I do not understand why the error.
Help!
Thx, Chris
Dell 8400 Windows XP Pro

If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish):
Loading songs onto iPod automatically - Mac
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes
Or you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod
Loading the iPod shuffle differs slightly but it can still be used with the others, for details have a look at this page:
Loading songs onto iPod shuffle - Mac
It's also possible to have multiple libraries in a single Mac user account. To create or access a second (or more) library, hold down the Option key when launching iTunes 7. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. This can prove tricky when using multiple iPods, if you don't use the keyboard command you can risk syncing to the wrong library:
Using multiple iTunes libraries -Mac

Error in creation of text indexes and synching with user datastore

Hi
has any body encountered error in creating text indexes on 9.2.0.1 with user datastore. you can create them only with no-populate option. however once created after checking-in documents the indexes cannot be synched using ctx_ddl command manually.

The only thing that I have seen similar to this was worked around by updating the column to itself, then sync...not sure if this is the same thing you are running into, but it may be worth a try. See the Oracle Text FAQ - take special note of step c:
===============================
Creates the index without populating it.
SQL > CREATE INDEX GLOBALINDEXEDBLOB_I
ON ODMM_CONTENTSTORE ("GLOBALINDEXEDBLOB" ) INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS (' stoplist CTXSYS.DEFAULT_STOPLIST storage IFS_DEF_STORAGE section group IFS_SECTION_GROUP wordlist IFS_DEF_WORDLIST memory 32000000 filter IFS_DEF_FILTER format column FORMAT charset column CHARACTERSET lexer IFS_GLOBAL_LEXER language column LANGUAGE nopopulate');
b. Mark globalindexedblob column in every row as updated.
SQL > update odmm_contentstore set globalindexedblob = globalindexedblob;
c. Sync the index. If you skipped the previous step, then this step does not index content that existed prior to index creation in step a.
SQL > exec ctx_ddl.sync_index('GLOBA[i]Long postings are being truncated to ~1 kB at this time.

Synch'ing SAP - LDAP ( WAS6.10)

Hi,
I have used the fantastic functionality available from WAS6.10 to synchronise SAP backend systems with an LDAP..
BUT, I'm trying to synchronise the security access a user has in a 4.6c SAP system to Active Directory. What options do I have here? If possible, it would also be good to be able to synchronise other information from the HR master data.
thx!
-- Edit: I have looked at the SLDAP function group and there are quite a few function modules that seem to interface an LDAP. Does anyone have any experience with implementing a synch using these function modules?

Doug Reeder wrote:
> I've installed Eclipse 3.4.1 on OS X 10.5.7 (same problem under 10.5.6)
> with the Web Standard Stools (1.4.0, 1.5.1 and 3.0.2)
>
> My problem is, in the Script Explorer, NEITHER feedsearch.js NOR
> protoype.js IS DISPLAYED, SO I CAN'T OPEN feedsearch.js TO EDIT IT.
> Other JavaScript files in that directory are displayed just fine in the
> ScriptExplorer.
The Script Explorer is only part of WTP 3.0, so I'm not sure where
the other versions come into it. The first thing you should do is
update to Ganymede SR2/WTP 3.0.4, because I'm unable to cause the
same thing to happen with it with the default view Filter settings.
Nitin Dahyabhai
Eclipse WTP Source Editing
IBM Rational

2 user libraries in finder?

Hi everyone,
I just updated to Mountain Lion today and discovered something that seems a little strange. It appears I now have 2 different user library folders. If I select my macbook from the devices menu in the finder sidebar then Macintosh HD, I am presented with several folders including Library, System, Applications, User Guides and Info etc. I was under the impression that this Library folder represeted my user library, however it appears the info in this library is different from if I navigate to Library using the Go tab in finder and holding down option and selecting library. For example, in the Go, Option library the folder Mobile Document exists. This folder and a few others is not present when accessing the library using the first method. It appears these libraries contain different information. Any ideas what that first library is? Possibly a previous library from an older version of OSX? Thanks for the help.

Thanks for the replies guys. If you don't mind my asking, what is the purpose of the library at the level Devices>MacHD>Library if this is not my user library. I was previously under the impression that there were two libraries, a system library and a user library. Thanks.

Consolidating Different User Libraries in Windows XP

We have 2 separate users accounts set up in Windows. A lot of the music is duplicated under each user. I would like to consolidate both libraries into one to save space and delete completely the second user account as this is all the second user is set up for on my PC. I am hoping to update the two ipods manually via separate playlists in my user account once consolidated. I know that I can consolidate music held outside the itunes library but in this instance all music is held in the itunes folder but under different users.
Can anyone confirm the process?
ipod photo 30gb/ ipod 20gb Windows XP

the following document might help with the initial "consolidation" process:
iTunes: How to share music between different accounts on a single computer

JDeveloper 11g - Auto Load User Libraries for Every Project

Hello. I have created a user library in JDeveloper 11g by going through Tools -> Managed Libraries. These are standard libraries for my company, and I would like to load them automatically into every project (Fusion ADF) on project creation. Is there any way to do this? I already tried checking the "Deployed by Default" flag, but that did not work.
Thank you in advance.

Exactly which version do you use?
You can try to create an application out project template and select your library in the projects.
Timo

Consolidate user libraries on Macbook pro

I have 3 different user accounts on this computer, but I can't seem to merge each user's library into one central library. We don't want separate libraries. How do I create a central library and maintain it as a single library. When one user gets downloads, we want the downloads to go to the central library.

Use the instructions in this article to merge the libraries.
(14822)

Multiple users/libraries

We have five different users on this computer (family) and we all have ipods. Question is, we all like a lot of the same music, yet up until now, we've each downloaded the same CD's over and over again, to put them on our own itunes libraries. Seems to me that this is taking up way too much space on the computer. Is there a better way to do this? There must be....thanks....
All 7 of our ipods are listed below....thanks!
~~Mara
Power Mac G5 Mac OS X (10.3.9) 3: 60G ipods, 1: 4G nano, 2:10G ipods, 1: 1G shuffle

If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish):
Loading songs onto iPod automatically - Mac
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes
Or you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod
Loading the iPod shuffle differs slightly but it can still be used with the others, for details have a look at this page:
Loading songs onto iPod shuffle - Mac
It's also possible to have multiple libraries in a single Mac user account. To create or access a second (or more) library, hold down the Option key when launching iTunes 7. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. This can prove tricky when using multiple iPods, if you don't use the keyboard command you can risk syncing to the wrong library:
Using multiple iTunes libraries -Mac

ITunes Match, multiple users/libraries

I've poked around a bit, and can't find a clean answer to my question.
My situation is three users, a couple of shared devices, and several ipods/iphones. To this point, we have used one apple id for everything. But each user has pretty specific tastes, so three fairly divergent music libraries. I want each user to be able to manage their library in the cloud most effectively without merging. iTunes Match, however, doesn't differentiate by library. If I turn it on for everyone, everyone's music gets mashed together, including play counts and playlists.
My next solution was to just give everyone their own apple id, and pay for each person to have music match. However, when I tried this last night, as I activated a new id, I was told my computer was already associated with an Apple ID, and that ID would be locked out for 90 days in terms of iTM.
My conclusion is that there is no way to have multiple users manage their libraries independently using iTunes Match. Is this correct? Does anyone know of anyone work arounds? Am I missing a setting somewhere?
Thanks

Each user on each computer will have to set iTUnes to use the external as the library location.
Next depends on what you want to do. Move all files to external then using iTunes add the files to iTunes library again. Empty library in iTunes then add files to library recreating library from scratch.
All users will have to maintain each library separately even though all files will be in same place and accessible to all users. When one person adds something to their own library the other ones will not know it. If someone else wants those files also then they will have to use add folder or add file option to add the files to their own library. It should not duplicate the files on the drive but is sometimes does when you do this. Deleting files or renaming them can be problematic if one user deleted a file another user has in library it will affect both. Podcasts are an exception, these will always duplicate if multiple users subscribe. This allows individual management of episodes.

ITunes Issues - Multiple Users/Libraries

I am experiencing several issues that revolve around multiple users, multpile iPods and two networked computers. To describe the situation - I have two computers networked with an external drive connected to the main computer. My wife, my son, and I are all users of the computers, we all have our own iPods and it seems like we have multiple libraries out there. I am looking for a solution to do the following: Consolidate all of the libraries into one shared library that all of us can use located on the external drive (due to size constraints and trasportability). The external drive is a plug and play type device with ample space for this. SOme of the issues I have are some songs appear in one iTunes list with a gray exclamation point in front of them and then you have to go searching for the proper folder/library to locate the file, so obviously there are multiple libraries/folders. I believe this has everything to do with my sons "ability" to fix things on the computer. Can anyone direct me to or provide me with a solution to this dilemma? Is there a way to consolidate these without creating multiple copies of the same songs (this has also occurred in the past when my son was solving things. Sorry for the long description but I am trying to provide as much info as necessary.

Each user on each computer will have to set iTUnes to use the external as the library location.
Next depends on what you want to do. Move all files to external then using iTunes add the files to iTunes library again. Empty library in iTunes then add files to library recreating library from scratch.
All users will have to maintain each library separately even though all files will be in same place and accessible to all users. When one person adds something to their own library the other ones will not know it. If someone else wants those files also then they will have to use add folder or add file option to add the files to their own library. It should not duplicate the files on the drive but is sometimes does when you do this. Deleting files or renaming them can be problematic if one user deleted a file another user has in library it will affect both. Podcasts are an exception, these will always duplicate if multiple users subscribe. This allows individual management of episodes.

Synch-ing user libraries

Similar Messages

Maybe you are looking for