Synch music from iPod to new MacBook Pro .. can't find my music in iTunes

Hello, this is Bryan ....
I recently purchased a new MacBook Pro because my old MacBook was 7 years old. All of my data was saved on external hard drive (time machine) files and apps transferred fine. ... one thing which did transfer to my new computer is my music... Perhaps I don't know how to access iTunes properly ?
I have an iPod which I use with my stereo all the time   ... it has never been synched to the New MacBook Pro.
The iPod has 4,530 songs and some playlists ... I don't want to lose this data.
Can someone help me ???

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Similar Messages

  • Putting Songs From iPod onto New Macbook Pro

    I am trying to put the approximately 75 gb of music that is on my ipod onto my new Macbook Pro. My Powerbook died unexpectedly and took all my music with it. So now all I have is my little external hd, aka ipod. I've looked online for help with confusing and unsuccessful suggestions for taking music from an ipod and putting it onto a computer. Any help?
    Thanks.

    Post in the appropriate iPod forum area:
    http://discussions.apple.com/index.jspa?categoryID=1

  • Copy songs from iPod to new MacBook pro

    My old iBook, which my iPod was linked to, was recently stolen. I have a new MacBook pro and I would like to move my iTunes library from my iPod (which I still have) to the new machine but there are some problems with this as I can't do it the regular way (i.e. connecting my iPod to the old computer and going to preferences and effectively turning my iPod into a hard drive etc.)
    Is there any way to move my music to my new computer?

    You can't sync your music back from an iPod to iTunes, the transfer of music is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the files from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward. I use Senuti but check them out and see which one you prefer.
    Senuti Mac Only
    iPodRip Mac Only
    PodWorks Mac Only
    iPod.iTunes Mac Only
    iPod Access Mac and Windows Versions
    YamiPod Mac and Windows Versions
    PodUtil Mac and Windows Versions
    iPodCopy Mac and Windows Versions

  • My new macbook pro can't find my Belkin network

    My new Macbook Pro is recognizing all sorts of newtorks in the area except the one in my home.  I have a Belkin N+ wireless router which I know is working because two other computers (pc) and my wife's iPad are having no problems connecting.  This is a frustrating start for a hesitant pc-->mac transition.  Any help will be greatly appreciated.
    Jim

    Just finished trying the suggestion from my Mac store "genius", and it WORKED.  He suggested that I connect to the router directly with ethernet.  His thought being that once my MBP found the IP address it would be able to find the network wirelessly.  While still connected I went to System Preferences/Network, selected WI-Fi and entered the network info (name & password).  There it was - connected.
    Don't know how to make this solution available to everyone with the same problem.  If someone knows how, go for it.
    Thanks to everyone who responded.  Your efforts are appreciated.
    Jim

  • New MacBook Pro can't find the base station

    I just bought a new MacBook Pro and AirPort Extreme Base Station. My house is wired for Ethernet so I plugged the Airport Exteme into one of the Ethernet outlets and did the set-up using my old iMac G5 over the network. (I had to download the latest software for the AirPort Extreme to the iMac before this would work right.) I finally got to the point where I got a green light on the Base Station, but when I search with the AirPort Utility on the MacBook Pro it can't find it, even when it is physically only 3 feet away. I then plugged the MacBook Pro into the AirPort Extreme with an Ethernet cable and it saw it - no problem. I then downloaded all the software updates to the MacBook Pro, restarted, unplugged the Ethernet and tried again. The AirPort Utility still can't find the Base Station. I am running 10.4.10 on both machines. I have 10.5, but don't plan un updating until I get this to work. I spent about half an hour listening to Muzak while trying to get to support and finally gave up. Any suggestions?

    In another Mac OS X user account. Choose Log Out from the Apple menu and log into it. If you want to move them over, drag them to /Users/Shared/.
    (65842)

  • New MacBook Pro can't find time machine

    I just purchased a new MacBook Pro and I want to restore my system from a time machine back up located on a Time Capsule.  I am attempting to do this using the Set-Up Assistant.  The process is as follows.  I select from Time Machine or other disk and click continue.  On the Select the Source screen, my Time Capsule shows up.  I click continue and on the next screen the new MBP can not find a source as there is nothing listed in the source box.  It continues to search but will not find my time capsule.  When I click the Back button, I see my Time Capsule appear for an instant before it shifts back to the previous screen.  My MBP is connected to my Time Capsule via ethernet cable and there is web access using that cable. 
    I don't know what to do.  Any suggestions will be great.  Thanks.

    You don't want to do that by copying.
    Your best bet, by far, is to use Setup Assistant.  If your Mac is running Snow Leopard, see Using Setup Assistant on Snow Leopard or Leopard.
    If it came with Lion, it's a bit different: Using Setup Assistant on Lion

  • New MacBook Pro can't 'find' my Windows notebook

    Hi, I got a new MacBook last week and I tried to transfer all my files from my notebook, which is running on windows, to it. They are both using the same WiFi connection yet I left it for ages and it still couldn't 'find' it. Does it take a long time to find other computers? Or is there another way to connect the two computers?
    Any help is appreciated.

    Hi m_dukes,
    1. Click GO
    2. Select "Connect to Server"
    3. Type smb://192.168.2.100/ <---The computers IP address or computer name that has the shared folders
    4. Hit Connect
    5. Enter login and password from your windows pc
    that's it.

  • New macbook pro can't find wireless printer

    I have an HP1320nw, configured to run wirelessly through a linksys E1000 wireless router.
    my wifes windows box can print to it ... and I can print to it via USB. But when I try and add it as an IP printer, my mac can't see it.
    also ... A ping on the windows box works ... a ping on the mac times out
    any ideas ?

    If the Ping from the Mac times out then that explains why the Mac does not see the printer. But note that you never see a printer when adding it via the Add Printer > IP pane. A printer will only be seen if it supports a broadcasting protocol like Bonjour and if it does it will appear in the Add Printer > Default pane.
    So working on why the Mac cannot ping the printer, the most likely is the Mac is set to a different subnet to the printer. If you make a note of the IP address used by the Mac, the PC and the printer, they should all be set to the same IP subnet. For a home network this is typically the first three sets of numbers in the IP address. The last number is known as the network address, and each device must have a different network address.
    So if the PC and printer have an IP address of 192.168.1.x, where x is the individual network address for each device, then the Mac must also be set to 192.168.1.x.
    The other thing to check is the Gateway / Router address. This will be the IP address of the Linksys router and this should also be set in the Network settings on the Mac.
    If the Mac is correctly set then are you able to ping the Linksys router or the PC?

  • New MacBook Pro can't find my A1314 wireless keyboard

    Any thoughts?  I've run the Bluetooth set-up assistant until I'm blue in the face, but, although it lists the keyboard as a device, it can't seem to "see" it sufficiently to pair with it. (No such problems with my much older wireless mouse, oddly!)  All thoughts gratefully received..

    Did you take a look at Apple's help docs?
    http://support.apple.com/kb/HT1809
    http://support.apple.com/kb/TS1569
    Also, did you run the "Bluetooth keyboard assistant" or the normal  "Setup Bluetooth device"

  • How do I transfer apps & files from old to new macbook pro

    How do I transfer apps, files & settings from old to new macbook pro?

    http://pondini.org/OSX/MigrateLion.html

  • I have a Powerbook G4, an iPhone 4 and a new Macbook Pro. How do I get my iTunes library and apps from iPhone over to the new Macbook pro without losing anything?

    I have a Powerbook G4, an iPhone 4 and a new Macbook Pro. How do I get my iTunes library and apps from iPhone over to the new Macbook pro without losing anything?

    http://support.apple.com/kb/HT4527?viewlocale=en_US&locale=en_US

  • I am currently managing 20 iPads on a macbook. I would like to manage the same 20 iPads on a new macbook pro. I have logged into the iTunes account on the new machine and see our apps but not the devices. How do i get the devices to be shown on new comp?

    I am currently managing 20 iPads on a macbook. I would like to manage the same 20 iPads on a new macbook pro. I have logged into the iTunes account on the new machine and see our apps but not the devices. How do i get the devices to be shown on new comp?

    Has anyone used apple cpnfigurator for this purpose?

  • Can I turn new MacBook Pro can turn like server

    Can I turn new MacBook Pro can turn like server

    There are many Server features already built into your mac.
    What did you wnat to Serve? {shared files, shared printers, shared Web pages, shared Address Book shared calendars, other } ??

  • New Macbook Pro Can't See Other Macs

    My Powerbook and iMac can see each other over the network and do file transfers, but my new Macbook Pro can't. The other computers show up in Bonjour Browser, but when I try to connect to them (either via their computer name, e.g. my-computer.local, or by ip) it can't. It tells me the address is wrong. It can't even ping them, and they can't ping it. It's weird because I can access both the internet and the router settings.

    After I did that Airport stopped working. The menubar icon said "Airport not configured" and there were no network interfaces in System Preferences. So I tried just putting the airport prefs back, and restarting. The same thing happened, so I had to put the whole folder back where it was.

  • My macbook pro can't "find" my disc (?!)

    I've just got the sims 3 island paradise and I've inserted the disc my macbook pro can't "find it". It asks me to insert the disc for me to be able to play when it's already in!? Why? Please help!!

    Call AppleCare (1-1800-APL-CARE) and give then the serial number.  They will send you a new copy of the two disks for shippingand handling of $16 each (I think $16 each).

Maybe you are looking for

  • How to construct table in jsp for the resultset from helper class

    Hi Dudes!!! Want to construct table in jsp for the resultset, but the resultset are retrieved at the helper class.I constructed Table in Helper class Using StringBuffer and return it as string from the helper class.Is their any other feasible and eff

  • Open item list

    Frnds Where can i generate the list of all the open items for particula GL A/c? I just want to look at all the open item for particular GL A/C Please get me a T-CODE for tht Thanks

  • Problem in modifying a table through modify statement

    Hi, I am trying to update a 'Z' table in which there are 5 fields comprising of primary key. Out of them 2 key fields are defined as a part of seconadry index with 'Unique' option selected. As per the requirement, I am trying to update the table usin

  • I receive a confirm dialog box, when clicking on "stay on page" nothing happens

    I receive a notice that says "stay on page or leave page". When I click on either button nothing happens, then the page locks up and I have to shut down by pressing the power button as nothing will work and restart my computer a Mac Pro new 2012. I g

  • How to define the "target group" in STMS?

    Experts: We have a ECC  landscapes with many clients on DEV and QAS. The previous basis admin created 2 target groups at STMS. The first TARGET  GROUP  has  both DEV and QAS clients as the target systems in its definition. The second TARGET GROUP  ha