Synch not working after new FF install

I set up sync before having my laptop replaced only to find that apparently my new install on the new laptop can't sync because the version on my old PC wasn't the latest version: http://mzl.la/1BsOrV8
Is this the case? Is there anything I can do to sync my new install with what I synched before my old laptop was wiped?

hi smash100, firefox 29 and above use a new sync login system which isn't compatible with the old username/password/sync-key method anymore. you could try this "hack" to get a new firefox version to connect to an old sync account though:
enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up), right-click somewhere in that page & create a new string preference named '''services.sync.username''' with a value like '''fake'''.
afterwards you should be able to connect to the old account through the firefox options > sync panel. click on '''set up firefox sync''' > '''i have an account''' > '''i don't have the device with me''' where you can enter your existing credentials.
if this worked and you could import your data successfully, please migrate to the new sync afterwards: [[How to update to the new Firefox Sync]]

Similar Messages

HT3917 My apple wireless keyboard is not working after new batteries installed

My apple wireless keyboard is not working after new batteries installed.

Do you get a steady green light to say there is a connection. If not, are the batteries the right way round. Do you have a monitor to tell the batteries strength. Is there a reading. Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

Touchsmart 320-1030 Touchscreen is not working after OS re-install

HDD crashed, and was replaced with new, re-installed system from factory recovery CDs, now touch screen does not work. I have re-installed the drivers to no avail. system Properties says under Pen and Touch: No Pen or Touch Input is available for this Display. It used to work before the hard drive crashed. Is there a setting in the BIOS? or something else I may have missed?
Thanks

Hello @ncmich2,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the Touchscreen of your desktop computer is not working after replacing the Hard Drive, and I would be happy to assist you in this matter!
To re-enable the touchscreen features on your computer, I recommend re-installing the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). To update the newly installed software, please follow this resource on Using HP Support Assistant (Windows 7).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Keyboard and Touch-Pad Not Working After Having to Install New Hard Drive

I had to install a new hard drive in my HP Pavillion DV9700t that has Vista Home Premium 64-bit. After going through the recovery process with backup disk the built in keyboard and touch-pad do not work. During the installation, an error message came up saying something along the lines of "the drivers are not supported by this verison of windows because they are unsigned." The drivers that had that error were "hpqkbfiltr keyboard filter driver," "HP remote control HID Device," and "hpqkdfilter driver." I tried to update the drivers for the keyboard from the hp website, but the keyboard and touch-pad still do not work.
My question is, where do I find the digitally signed drivers for the keyboard and touch-pad that Vista won't flag and disable?
Help please!

Sparkles,
Thanks for the suggestions.
When dealing with MS Fix It, I was choosing run. Upon further investigation on that site, there really isn't a scan that applies to my issue anyways I tried the .NET Framework repair tool, and that seemed to work. It told me to try re-running what I was having issues with, so I tried running the Windows PowerShell again, but again was faced with the following message "windows update standalone installer encountered an error: 0xc8000247." I went back to the .NET screen and hit "Next" because it didn't work, and that responded by saying they were going to submit logs to Microsoft. I won't hold my breath on that one.
I'm to the point where I honestly don't care anymore. I have no idea what to do, because doing a clean install with the discs HP sent me isn't going to help because they are just recovery discs, and not an actual Windows disk. This is the second hard drive I have had to put into my laptop and use those recovery disks on in the last 3-years. The built-in keyboard hasn't worked during that time frame on either hard drive. I don't think the recovery disks I was sent install properly. Not sure where to go from here. I spent way too much money on this laptop years ago having it custom built to handle all of my drafting programs, so I don't want to just kick it to the curb. I was looking into the possibility of just replacing it, but I cannot stand the Windows 8 interface.
I guess I should have fixed the issue with the keyboard on this hard drive before loading all of my programs. Between the recovery disk install, formatting of the hard drive, and installing all of my programs it took well over 12 hours. Not really looking forward ot that again Then there's shockwave and flash and all of the other goodies that my recovery disks won't restore anyways.
Sorry if this seems like a negative post, but I'm just tired of trying to no avail. Maybe I should just take it somewhere to get it looked at, but I can't see them being successful if the recovery disks won't help anyways.
Thanks for you help,
MadBuch

Siri does not work after IOS 7 install

Siri doesent work after I OS 7 install I hear it is a hardware problem. Siri works fine but then you download IOS seven and it stops working. Apple has told a couple people they have to buy a new phone. I hope thats not true. Because I will buy a new phone but it wont be apple if thats the case.

Hello, Dan.
Thank you for visiting Apple Support Communities.
I would recommend going through the troubleshooting steps in the article below when experiencing issues with Siri.
iOS: Troubleshooting Siri
http://support.apple.com/kb/TS4079
Cheers,
Jason H.

EPrint does not work after new wifi router on Verizon DSL

I have been using ePrint on my iPod, iPad, and iPhone for a few months without a problem, but recently had to switch to a new wifi router on my Verizon DSL, as my wifi kept turning off and Verizon's solution was an updated wifi router. Since the switch, I cannot ePrint from my mobile devices. I can, after reconfiguration, print from my laptops. The ePrint app still finds the Deskjet 3050a, says "sending to printer", but will not print. The ePrint is turned on. I tried to delete the app and reinstall in hopes that I can start fresh, but it still does not work. I tried to add a new printer, with the email supplied on the ePrint screen on the printer, but nothing.
Any ideas?

Hi Honor Student
Is your printer connected to the new router as it sounds like it is still looking for the old one ? Maybe just disconnect it and reconnect it again to your new router and then the ePrint APP should pick it up.
I work for HP.
Thanks
Caroline
Although I am a HP employee, I am speaking for myself and not for HP.

WSUS "Self-update is not working" after new certificate

After creating a new self-signed certificate in SBS 2008 wizard we get the following error:
Text: Self-update is not working
Source: Windows Server Update Service
Event id: 13042
I know that it must be something simple. But I can not find the solution.
Can anyone help me with this problem?
Thanks

Hi,
Based on your description and this error message, this issue may be caused by:
The Default Web Site is not running and/or has a site binding for SSL (HTTPS).
The Selfupdate virtual directory has the "Require SSL" checked under the SSL settings.
For more details, please refer to the following KB and check if can help you to solve this issue.
WSUS 3.0 Self-update is not working on Windows Small Business
Server and Event ID 13042 is generated
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

Thunderbolt is not working after Mountain Lion installed

I'm putting this discussion again because the problem didn't solve like I thought !
As you can see from the title that I have a problem already after I installed the new OS X Mountain Lion. I got my thunderbolt to Hdmi adabtor connected to an LCD TV and it was working great with snow lepord. But after the I installed Mountain Lion. it won't even recognize that there is something connected and I don't see the options in my System Prefrences> Diplays like before.
I already run software update and it's all up to date and also done a PRAM reset and nothing changed.
It only ok for a couple of min. if I restarted it and without the sound working from the LCD TV.
Please I need help here.

Well I would have hit repair. This might be stemming from a deeper issue with the installation. I've never seen that dialogue box before, and if ignoring it and booting normally worked for you then I say you did the right thing.
however
I would, go to disk utility and then select your boot drive and verify and repair disks and permissions.
if anything else WEIRD should occur, you may want to go to the recovery partition of ML (cmd+R while hearing the boot chime) and reinstalling ML. That dialogue box you mentioned is strange and should be noted. A reinstall will probably fix whatever issue comes up.

Satellite L450D Webcam not working after new installation without recovery

Hi there,
as posted in the thread title I have a problem with the integrated webcam of a customer notebook. Two days ago the operating system of this laptop was damaged by a virus and needed to be re-installed. I tried to install it with the recovery partition, which did not work. After it I tried to re-built it with the dvd I burned from the recovery partition with the same result.
The only thing that worked was a clean install with a windows 7 64 Bit retail dvd and the key printed on the sticker of the laptop. I managed to get everything working again except one part - the webcam.
No driver installation, bios update and re-installation worked to get this part to work.
Did anyone of you know this problem and have a fix for me?
Thanks in advance.
Greetings Saphire
P.S.: One thing shall be also important. When I look into the installed devices manager the driver for the webcam is listed as usb webcam and the manufaturer of it is Microsoft.

Hi
I dont think that this needs to be fixed because I dont think its hardware related issue.
I think there is something wrong with the software on your notebook.
I mean everything worked perfectly until virus has damage the OS. Right?
You said this:
>I tried to install it with the recovery partition, which did not work. After it I tried to re-built it with the dvd I burned from the recovery partition with the same result.
I really wonder why you could not get this working using Recovery disk.
So possibly this is the key to this issue
On the Toshiba European driver page I could find Registry Patch v1.1 For Win 7 64bit
Also webcam driver v 1.1.1.4 is available there
I think the OS is responsible for your issue possibly some patches are applied or similar

Secondary monitor does not work after OS X install

My secondary monitor does not work well after OS X install. The image on my secondary monitor is different even the screen svaer image is different and the mouse can not be seen.

Try the easy thing first - NVRAM reset:
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
If that does not work, post back with more info, including the version of Mac OS you are running. How is the external monitor connected, did it ever work, and from what OS X to what was the "OS X install" in your title?

Iphoto not working after time machine install

I have a first gen intel iMac and the hard drive had a sudden failure I was not overly concerned about my Data as I use time machine. I had a new Hard Drive installed and I used time machine to install back to snow leopard. all seems fine for a few days and every thing (software and hard ware (scanner)) was working fine. then I opened iPhoto to add a few new photos and all I get is the spining beach ball the library is 26 gig in size and was working fine before. I am at a loss as I still have all 9745 original photos on back up drive but not in order like in iPhoto and really don't want to recreate my library all over again. I've done disk permissions and only seem to have a problem with Java any body got any ideas?

Hi there Guys
I don't know if this is a true fix but my iPhoto 11 is now working iPhoto had an update and I did it to both my iPhoto programs (mac book and iMac) I then opened the not working librery on the laptop and it said the library need to be updated it did this and opened okay and all was working fine (I copied library on to a portable FireWire HD) when I copied it back to my iMac it said the same and went through the update and is now working fine.

NP Officejet H470 - willl not print after new cartridge installed

Changed my black cartridge and now will not print at all. Document shows briefly in printer dialogue box but then disappears. Printer makes a noise like it wants to print but then nothing happens. Printed fine before cartridge change! Any ideas?

I bought a new unit. First thing it would not work. Pause light and start light flashed. finally after much research on HP site and elsewhere I solved it myself!
I found a part loose in the unit! Open the ink door, see a 1/8" +/- diameter rod under the print carriage, look at the right end, there is a white part that should be down and probably should click into place. Mine was up at a 45 degree angle. It went down easily, but did not truly click into the receiving hole, however it was enough that the printer worked!
The left side was down, but yours may bear checking.
HP puts you through all the testing stuff, but fails to rememder that printers are electro-MECHANICAL devices and can fail on the mechanical side.

Video download not working after new firmware.

Updated to the latest firmware on the 5530 and I just noticed that video downloads in youtube, etc. are not working anymore. They worked fine before.
The player opens, says Loading... gets to 0% and nothing.
When I quit the app, it says, "video is not saved, do you wish to save it?"
Suggestions?

Hard reset your phone *#7370# 12345 reformat, lose all data and don't install apps on your memory card.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Mac Pro not starting after new RAM install.

Hey everyone,
I have a Mac Pro Mid 2010 2x2.66 GHz 6-core (12core) Mac Pro with OSX 10.7.5. I currently have 6gb 1333 MHz DDR3 ECC ram installed.
I ordered 16gb (2x8gb sticks) of RAM from newegg, specifically, 2 sticks of this ram:
Kingston 8GB DDR3 1333 ECC Registered Memory for Apple
I popped it in yesterday and when I try to start up, the LED light just flashes and the screen acts as if nothing the computer hasn't been turned on. It does not beep or make any startup sounds either.
As far as I can tell this memory is in spec. It is "Registered", could this be a potential problem? I have tried various configurations of which slots to put the ram in. The only thing I haven't tried is putting the 2x8gb sticks in by themselves to see if it might be a capacity or mixing of ram issue.
Does anyone have experience with this or know where I might be going wrong?

What you have not done is actually... what I would have done first to start with!
To make sure it works and works alone.
Mixing is suppose to work now, better, but as OWC found earlier, mix and match requires DIMMs that will.
There is more in depth on MacRumors about ranking, Registered and much more about using 3rd party and what to look for and does or does not work. Which is nice, they try and tend to keep everything in one place, one thread, easy to find and read.
And Newegg price isn't really different than say buying from MacSales.

Synch not working after new FF install

Similar Messages

Maybe you are looking for