Synch rfc to file

hi
is synch asynch bridge used in synchronous rfc to file please? if so how does it work?

>>Is there a scenario like synchronous rfc to file?
>>Do we use synch asynch bridge for that?
Yes. Follow this Blog Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi By Sriram Vasudevan. It demonstrate a scenario of Sync Http and file in you case the sender is an SAP RFC function.
Thanks
SaNv...

Similar Messages

Regarding RFC to FIle

Hi Everyone,
Would anyone Please give me steps for RFC to File Scenario.
Thanks & Regards,
Varun

1) Create synch interfaces 4r source and target.
For RFC while creation of interface
input msgtype - Request msg
output msgtype - Response msg
2) Create 2 msg mappings.
inputmsgtype(file)----> Requestmsgtype(RFC)
Responsemsgtype(RFC)--->outputmsgtype(file)
3) Create 1 interface mapping choosing synch interfaces on
src and tgt side.
-->you ll get two tabs here request and response.
-->Click on request nd specify 1'st mapping
--> Click on response nd specify the 2nd mapping.
Refer this blog:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/file-rfc-file%28without+bpm%29&

Step by Step Guide Details for RFC to File and File to RFC scenario

Hi Guru's
Good day to you. I am tyring to develop some scenarios based on RFC adaptor. so i want to start up with basic scenarios like RFC to File scenario(Here i just want to pull some data from SAP using RFC and put it in destination folder as an text file) and FILE to RFC scenario (Here i just want to take some data from the file and update into SAP).
For doing these scenarios i would like to request you people to send me the step by step guide which explains me about the complete steps of configurations required to do the RFC to FILE scenario and FILE to RFC scenario.
I found some scenarios and i am in confused state. so i request you to please put your experience to help me out.
thanks in advance.
Regards
Raj

Hi Aaron,
I don't know your scenario and your ECC and PI versions but I learned how to use ABAP Proxy more than 1 year ago with the following tutorial:
Edit--> The forum doesn't allow me to post external link, just search "ABAP Proxy Communication Scenario" in google and visit the 1st result
The way to develop ABAP Proxys has changed a little if your PI is 7.1. In the ECC side, the transaction SPROXY looks much better too if you have a recent version of the ECC.
Edited by: Marshal on Oct 8, 2009 5:08 PM
I've found that SDN Document. Maybe the scenario is not the most simple to start with ABAP Proxy but is very well documented and is for PI 7.1. The document also handles the inbound and outbound proxys
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f&overridelayout=true]
Edited by: Marshal on Oct 8, 2009 5:22 PM

Issue in File to RFC to File Scenario with BPM using Block Step

Hi Everybody,
                       I am doing File to RFC to File Scenario for multiple records using BPM using Block Step. The File Message is getting posted and after that, the message is getting stuck up in the qRFC Monitor (Inbound Queue).
                    After seeing the message in Inbound Queue, I am trying to execute and release the message. But when i execute the LUW, it says " Function module doesnt exist or EXCEPTION raised" in Inbound queue.
Could somebody suggest me the outcome of this? What does this mean and how to
release the stuck up message in Queue.
Thanks and Regards,
N.Jayanth Kumar

Hi Rajesh,
                       After going through the blog, i saw the trace messages. It says
" The   exception occurred (program: CL_SWF_XI_INBOUND=============CP, include CL_SWF_XI_INBOUND=============CM00F, line: 19)"
Regards,
N.Jayanth Kumar

Issue in Sync-Async bridge(RFC to File) scenario

Hi All,
My scenario id RFC to file synchronous scenario.Following the below link, I configured everything and its working fine. I am working on SAP PI 7.31 Dual Stack.
http://scn.sap.com/blogs/henrique/2007/08/02/syncasync-scenarios-without-bpm
As mentioned in the above link, I created the file with Message Id as file name and correlating with the message id(Using WaitResponse and Notify beans).Its working fine. But I don't want the file name to be as Message Id. Then in that case, please suggest me how can I correlate the request and response messages.What are the possible ways of doing it.
Thanks,
Madhurima

there is not a best way, just what you need to archive, take the file name as you mentioned is not the best practice, so you can use another parameter provided by SAP.
To evaluate the following attributes in the PI message header, set the corresponding indicators:
○ File Name (technical name: FileName)
○ Directory (technical name: Directory)
○ File Type (technical name: FileType)
○ File Encoding (technical name: FileEncoding)
do any of them are good for you?
Rdgs

RFC destination for RFC to File scenario

Hi,
I m creating a TCP/IP RFC destination in R/3 system for my RFC to File scenario.
Step 1:
For this a Registered server program is created in Jco RFc Destinations with,
Program Id : pgm1
Gateway host : PI's host
Gateway service : PI's service
application server host: ECC's host
system numer     : ECC's number
client : ECC's client
logon user : ECC user
password : pwd
Step 2:
In SM59, TCP/IP connection the following parameters are given:
Program ID : pgm1
Gateway host : PI's host       -
> is this correct
Gateway service : PI's service      -
> is this correct
Step 3:
So i am calling the RFC in ABAP program (R/3 system) like:
CALL FUNCTION 'Z_HR_OUTBOUND_DATA2'
IN BACKGROUND TASK DESTINATION 'Z_HR_OUTBOUND_DATA2'
Step 4:
In PI side,
for RFC sender I am passing :
Application server : PI server
Application server service: PI host
program ID: pgm1 which was created in the previos step
For RFC Metadata Repository Parameter, i am passing all the values related to R/3
Please let me know whether the steps and values i given is correct.
B'cos even if i give ECC's information in Gateway host and Gateway service the scenario works fine and if i PI's info then also it works fine.
so i am confused as which is the correct method. pls clarify

Ok I will try to explain....
Assumptions: R3_TO_XI is the name of RFC which I created in ECC of type T.
While creating the RFC in ECC we mention a unique name which is called Progaram ID. Now the same program id we mention in our sender RFC CC.
So now when an ABAP Progarm (where you will call this RFC with it's destination) is scheduled/triggered with the code as mentioned below then since the DESTINATION ('R3_TO_XI') mentioned here contain the same program id which we have mentioned in our sender CC, invokes the adapter in PI and soon after that all pipeline steps get executed in XI.
CALL FUNCTION 'ZBAPI_COMPANY_GETDETAIL'
IN BACKGROUND TASK
DESTINATION 'R3_TO_XI'
TABLES
    comp_detail = company_detail.
COMMIT WORK.
Regards,
Sarvesh

Synch RFC--BPM --Sync JDBC

Hi All,
I am doing a schenario where in im using BPM.
Synch RFC from XI box will trigger the interface, then i will make a synch call to sql server & synch call(RFC) to R/3.
Can anyone please letme know the steps required in BPM.
Do i need synch-async bridge?
And also lemme know if i can map a ASyncronous Message Interface to a Syncronous Message Interface.
Can i Map source as Synch RFC & target as synch sql & synch rfc R/3.If not how do i map
Thanks
Sumit
Message was edited by: Sumit Khetawat

Sumit,
I just looked upo into one of my SYNCH AYNCH Scenarios and i have created my interfaces exactly like i mentioned in these steps,
<i>1. RECEIVE step ==> Opens SYNCH ASYNCH bridge and receives RFC request message.
( This will have a synchronous message interface associated with it. A synch abs interface and will be used for the PROPERTY ~~Synchrnous Message in the BPM) We would also need an ABS ASYNCH Message Interface created for the Request Message and this should be used in the MESSAGE ( after creating CONTAINER element) for the same. )
2. Transfrom step ==> Map RFC request message to JDBC request message. Mappinng between 2 abs Aynch Interfaces
( You will have container elements created for REq RFC as stated in the step 1 and another for JDBC request )
3. SEND synchronous ==> to send JDBC request and get the JDBC response.
( You will use a SYNCH ABS against MESSGAE INTERFACE , and also, a separate ABS ASYCNH for request and response )
4. TRANSFORM step==> Map JDBC response to RFC response . Mapping between ABS Interfaces
( same as step 2)
5. SEND ==> Closes SYNCH ASYNCH bridge and Send's response back to the RFC.</i>
Use the Container element created for the mapping in step 4.
In case of Split mapping, again you will need ABS ASYNCH Message interfaces.
Drop me a mail if you need screen shots.
Regards,
bhavesh
All you mapping in the BPM is between Asynch Abs Interfaces.

Error Handling on RFC - XI - File Scenario

I have an R/3 RFC -> XI -> FILE scenario that works, but does not adequately handle the error of my R/3 to XI connection being down.
The RFC call is async since I was under the impression that I had to do a "to file" scenario that way.
    CALL FUNCTION 'ZXO_SAP2RFC'
      IN BACKGROUND TASK
      DESTINATION wa-rfc_dest_1
      EXPORTING
        request          = request
        rfc_header       = rfc_header.
    COMMIT WORK AND WAIT.
    IF sy-subrc <> 0.
      [error handling]
If my rfc destination is down (for example when XI is down), this RFC call is still getting a sy-subrc of '0' (so my error handling does not kick in).
Any suggestions?

Hi Keith,
your scenario is working correctly. If XI is down you will find your message queued in transaction SM58, where you can restart it manually. Usually there should be standard job for report RSARFCEX, which is periodicly trieing to restard the message.
Asynchr Call (tRFC) means that your program continues completly undependent from that call.
Make a test: Change temporary the called machine in SM59 destination to senseless value and execute your programm. Your message should be in SM58. Then correct the destination and wait a few minutes...
Regards,
Udo

CC error in RFC to File Scenario

Hi ,
While am trying to do end-to-end test for a RFC to file Scenario. Am getting this below error. Please help me to proceed further.
Could not process due to error: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value '2008-08-13' too long (>8 for 2. column) - must stop', probably configuration error in file adapter (XML parser error)'
Regards,
Hemanthika

Hi,
Please go through this Blog
RFC Scenario using BPM --Starter Kit
check this blog on how to configure sender rfc adapter.
The specified item was not found.
I hope it helps,
Regards,
Surya

[RFC to File]Problem about Changing file name in message mapping.

Hi,
my problem:
    Type:RFC to File
    I change the file name in message mapping.
when I call the RFC to send the data twice at the same time, both of the output file names are changed while I only want to change the second output file name.
    thanks
Sam

In my MM, the input values to these variables (var1, var2 and var3) are (<ZZCOMBI>array,G499999,END_FIFC0029) ,
var1 is an array of input <ZZCOMBI> item list;
var2 is get from a property file by call another UDF;
var3 is constant value.
the test input data :
I send the data for the first time:
- <rfc:Z_IFCFR821_ZIFCTT82100010 xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <T_ZIFCTS82100010>
- <item>
<ZZCOMBI>G000002G000002</ZZCOMBI>
<ZZKYKBN>*</ZZKYKBN>
<ENAME_VE />
<ENAME_Z5 />
</item>
</T_ZIFCTS82100010>
</rfc:Z_IFCFR821_ZIFCTT82100010>
so the input values to these variables (var1, var2 and var3) are (G000002G000002,G499999,END_FIFC0029)
the output file name(File1) :END_FIFC002920090413-171534-053.dat
output record: G000002G000002
because the data what I send is the last record, the system send the dummy data for the second time by program.
- <rfc:Z_IFCFR821_ZIFCTT82100010 xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <T_ZIFCTS82100010>
- <item>
<ZZCOMBI>G499999</ZZCOMBI>
<ZZKYKBN />
<ENAME_VE />
<ENAME_Z5 />
</item>
</T_ZIFCTS82100010>
</rfc:Z_IFCFR821_ZIFCTT82100010>
so the input values to these variables (var1, var2 and var3) are (G499999,G499999,END_FIFC0029)
the output file name(File2) :END_FIFC002920090413-171533-928.dat
output record: G499999
I find that File2(20090413-171533-928) was ouput before File1(20090413-171534-053 ) from the time stamp.
I am not sure about that "XI will create a message ID for each message and the messages are independent." as you mentioned above.
Best regards
Sam
Edited by: YONGHE ZHOU on Apr 15, 2009 3:59 AM

RFC to File - XML file output

Hi,
We are doing a RFC to file scenario where our o/p file is in XML format.
The required o/p file format is :
<?xml version="1.0" ?>
<MAT_GROUP xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<HEADER>
<MINISTRY_CODE>TOT</MINISTRY_CODE>
<DEPARTMENT_CODE>000</DEPARTMENT_CODE>
</HEADER>
<DETAILS>
   <MATERIAL_GROUP>
     <CODE>THIRDPRTY</CODE>
    <END_DATE xsi:nil="true" />
</MATERIAL_GROUP>
</DETAILS>
</MAT_GROUP>
But i am using a graphical mapping which gives me the following o/p
<?xml version="1.0" encoding="utf-8" ?>
<xsi:MAT_GROUP xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<HEADER>
<MINISTRY_CODE>TOT</MINISTRY_CODE>
<DEPARTMENT_CODE>000</DEPARTMENT_CODE>
</HEADER>
<DETAILS>
<MATERIAL_GROUP>
     <CODE>THIRDPRTY</CODE>
    <END_DATE>0000-00-00</END_DATE>
</MATERIAL_GROUP>
</DETAILS>
</MAT_GROUP>
can u let me know how to remove xsi which is before MAT_GROUP and how to changed the END_DATE with xsi:nil="true"
I tried to do XSLT mapping using ALTOVA by following the steps given in the link [url]http://wiki.sdn.sap.com/wiki/display/XI/FileTOFile-UsingXSLTmapping(forBeginners) but when i copy the XSD code from DT and save it as XML/XSD file and trying to Insert it into ALTOVA Mapforce it is not able to create the schema and shows the following error:
An error has occurred when generating an XML schema for the file C:\Documents and Settings\ISSUSER\Desktop\Gebiz\xml code\header_rcv1.xml.
Nothing to generate. Maybe all root elements are in known namespaces (e.g. 'http://www.w3.org/2001/XMLSchema').
Can anyone guide me...
Thanks.

can we use multiple types of mapping at the same time?
Keep the JAVA mapping as the last one in the Interface Mapping.....and yes you can use multiple mapings (types of mappngs) in the same Interface Mapping.
If you remove the namespace from Message Type then too you will see xml encoding tag in the output.....to remove this xml encoding you have to use the JAVA mapping.
b'cos we also want to remove xsi in the o/p file
You want to remove only xsi?
Regards,
Abhishek.
Edited by: abhishek salvi on May 27, 2010 4:57 PM

RFC Adapter RFC to File

Hi,
Can somebody help me to view this thread. I am learning XI using RFC to File and I have got some difficulties in undestanding the Adapter Configuration.
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step from Michal.
When I select this thread, I get blank page.
Thanks

Hello MK and Shabarish,
I need a little more help from you.
Here is XI Scenario.
Want to send Material info using RFM from system A to System B via XI.
Process: In System A, I create an RFM and send the data via dest paramter.
It looks like this.
Call Function
     dest 'SYSTEMA_SENDER'
1. I created T - RFC Destination in systemA.
    RFC Name     SYSTEMA_SENDER
    gateway host gbdsc1 ( using smgw)
    serveric          sapgw11
    Program id     SystemA_Sender
                         Registered server program, unicode.
2. In XI box, in Integration configuration, Created RFC sender channel with the following paramter
    Adapter Type   RFC - Sender
    RFC Server Parameter -
             Applcation server(Gateway) gbdsc1    ( As in RFC dest System A )
             App service(gateway)           sapgw11
             Program ID                          SystemA_Sender
    RFC Metadata repository
            Application Servr         ( What do I enter here is it System A)
            System Number
            Logon on User
            Logon pw
            Client
             Language
Finally,
In system A when I do connection test I get the following errors
Error: Program SystemA_Sender not registered
Location SAP-Gateway on gbdsc1/sapgw11
Detail:TP SystemA_Sender not registered
and other errors
Can you identify any correction required for the above RFC destination and RFC configuration?
Do I need to register the program and if so how?
Your help is deeply appreciated.
Regards

Triggering RFC FM in R3 for the RFC to File scenario

Hi All,
I am Developing a RFC-XI-FILE scenario where i am unable to triger an RFC from the source system(R/3) .I have used the RFC-FM : ZBAPI_COMPANY_GETDETAIL ( which is remote enable) i havent written any source code in the function module : just i have created only the parameters in the table as :
Tables:
COMPANY_DETAIL LIKE T880
i have created a source code in the se38 of R/3 to call this function module as :
DATA: COMPANY_DETAIL TYPE STANDARD TABLE OF T880 with header line .
selection-screen begin of block blk1 with frame title text-001.
PARAMETERS : COMP_ID TYPE BAPI0014_2-COMPANY.
selection-screen end of block blk1.
start-of-selection .
SELECT RCOMP
       NAME1
       CNTRY
       LANGU
       STRET
       CITY
       FROM T880
       INTO CORRESPONDING FIELDS OF TABLE COMPANY_DETAIL
       WHERE RCOMP = COMP_ID.
CALL FUNCTION 'ZBAPI_COMPANY_GETDETAIL'
               IN BACKGROUND TASK
               DESTINATION 'SENDRFC'
TABLES
    COMP_DETAIL = COMPANY_DETAIL.
COMMIT WORK.
I have created RFC destination in R/3 as : SENDRFC of type T with the programid : SENDRFC_PORTAL this same program id is used in the XI sever for the sender RFC adapter .
When i execute the above program in R/3 the changes are reflecting in the XI when i checked in the SXMB_MONI.
Please sugest the correct source code if the above source code is wrong and provide me the exact process to do .
Regards,
Bharat .

Hi bharat,
>>When i execute the above program in R/3 the changes are reflecting in the XI when i checked in the SXMB_MONI.
That means your RFC was called and the data was sent to XI.
>>Please sugest the correct source code if the above source code is wrong and provide me the exact process to do .
Since XI was called the source code is correct.
Am I missing something here? Can you provide some details about your requirement/error.
Regards
Suraj

File to Rfc to File in pi7.1

Hiii,,
Iam trying file to rfc to file scenario...when iam montoring sender commuication channel it shows below mentioned error...wat may the issue..help me out
"Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.service.administration.api.cpa.CPAChannelStoppedException: Channel stopped by administrative task.. Setting message to status failed"
With Regards..
Dinesh

Hi,
I checked the namespace its rite...whether i have to check the same namespace in sap system...if yes, where to find it..
I guess your File CC configuration is not correct. Namespace will be your source interface namespace in PI. This is a very basic question and should be searched on SDN / SAP Help before posting here.
Go through this SAP Help ...
http://help.sap.com/saphelp_nw04/Helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards,
Neetesh

Issue in RFC to File Scenario

Hi All,
I am working on SAP PI 7.31 dual stack. I have configured a simple RFC to File scenario with aysnchronous interface. I am using classic configuration.
In Sender RFC channel monitoring I am getting the below exception and the file is not created.
"Error in processing caused by : com.sap.aii.af.lib.mp.module.ModuleException : call to messaging system failed: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message xxxxxxxxxxx(OUTBOUND) expired".
Please suggest me what could be the issue.
Thanks,
Madhurima

Hi Madhu
As the log says the function module is try to execute synchronously.
But as per your requirement it should be asynchronous. Please remove all the export parameters from the function module.
Then re-import the function module in PI and adjust mapping and operation mapping.
Stop and start the RFC sender adapter so that it will get the new metadata of the function module.
The function module should have only import parameters so that it will act like a asynchronous interface.

Synch rfc to file

Similar Messages

Maybe you are looking for