Synching configuration between ECC and GTS

Is there any way we can automatically synch configuration (e.g.countries, regions) from ECC to GTS?
Thanks in advance.

Transaction SCU0 lets you compare configuration between systems, based on a number of ways of selecting the items to compare.
I am not sure if it offers any way to build a transport of the differences, or remotely update the target system. At least it lets you know what is different.
Andrew

Similar Messages

Communication between ECC and SCM via XI

I am trying to set up the scenario 'Purchase_Order_Processing' between
ECC and SCM using XI. The SCM content for XI has been loaded into XI
and this scenario is included in the content.
We are running the following:
ECC - Version 5.0 - 640 SP level 12
XI - Version 3.0 - 640 SP Level 14
SCM - 4.10 - 640 SP Level 12
The connectivity between the systems has been set up as described in the configuration guides. On sending an IDOC (basic type ORDERS05) into XI I get the following error message 'Http server code 500 reason Internal Server Errorexplanation Error during parsing of SOAP header'.
The Error XML is as follows:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Http server code 500 reason Internal Server Error
explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any assistance would be much appreciated.

Sravya,
Yes this an IDOC to http scenario. There was no dump at the receiver end. I've found out what was causing the problem - I was using an adapter type of HTTP. It should have been of type 'XI'. I've altered this and it works. Hopefully this will resolve your problem Vinod.
Richard

Best communication between ECC and PI

Hi All
SAP is planning to adapt Enterprise Service Architecture (ESA) in the journey towards Service Oriented Architecture (SOA).
We are working on new implementation project. We have many asynchrounous scenarios. We would like to configure acknowledgements and also like to handle errors effectively.
Could you please suggest which communication between ECC and PI is preferrable?
(Webservices, IDoc, BAPI or RFC)
Thanks
Sai

IDoc, BAPI , rfc - all can be used for seamless communication between ECC and PI. It is totallu dependant on the application and way information is exchanged. For master and transactional data idoc are prefered as for the acknowledgements supported by it. Not sure how effeciently we can handle system and appl ack incase of bapi/rfc. but at the same time idoc will be a drawback for sync comunication where rfc/bapi is preferd. It is SOA or ESA the concepts build in SAP are targeted to serve the enterprise needs where idoc,bapi/rfc are used for servicing the business unit objectives

Communication between ECC and CRM

Hello,
I am in phase of showing communication between SAP CRM 5.0 and ECC 6.0.
I am struggling with finding some simple transactions which are common in both, with which I can show correct connectivity between ECC and CRM.
I need to save some data from CRM and access the same via transaction within ECC, save some data via ECC and access it via CRM. I already established RFC link between ECC and CRM.
Probably communication between SD module of ECC with CRM.
Can you please help me out with this, a clue/correct direction will be of very helpful. Basically I want to know, what transaction I can use for same.
Any help is really appreciated.
Thanks
-Vishal

Hi Glenn,
I followed all steps in document mentioned above. In the end during execution of transaction I selected appropriate source and destination, when I click start transfer objects, it gets stuck in waiting phase.
Among those steps I was not able to perform step#10. Creating Subscriptions for OLTP. My ERP is not displaying this option under subscription wizard. Should it be reason for not starting transfer ? I also do not see ERP logon screen when I select transfer.
My another question is when transfer will complete, where I'll be able to see transferred objects within ERP database ?
Thanks
-Vishal

Problems with synching calendars between iPhone and Outlook 2007 on Windows

I recently purchased a copy of windows 7 ultimate 64. It was an English version, but since it is ultimate I downloaded and changed it to Danish - so far so good...
I have synch'ed between outlook and iPhone on a Vista platform without problems, but now on windows 7 when I sync - the result is, that on my iPhone the meetings, work schedules and birthdays I have in my calendar is shown a day too soon!!
I have checked that both iPhone and Outlook start the week on Mondays, so that is not an issue - I have updated my iPhone to the newest software with out any luck - so now I try and write here instead - hopefully someone can help me...
thanks in advance

yes they were set to the same timezone - which puzzled me a lot...
I lost a lot of sleep, but I can now say that I have solved the problem...
What I did was, that I un-installed microsoft office (desperate I know!) - then ran a sync with the iPhone choosing to overwrite the Calendar in the phone - as there was no calendar present - it deleted what was on the phone. Then I re-installed Microsoft office, by doing that, I didn't loose anything because the user files was still present including mail setting etc. - resynced the iPhone - and now it works...
Just can't figure out what went wrong in the first place...
thank you for your answer

Block Demand Depend Interfaces between ECC and SCM

Hello All.
Is there a way to block only interfaces of Dependent Demand between ECC and SCM.
I need to do this because ECC writes over my plan in SCM.
Thanks and Best Regards

Hello PrasunM
For example:
When you create an Order on finished material, SCM using PP method "3 - Cover Ind. Requ." creates DepReq on raw material.
SCM using CIF sends PlOrd, PrdOrd and DepReq to ECC. I want send only PlOrd and PrdOrd, DepReq i only need in SCM side.
Best Regards.

ECC and GTS integration

Gurus
If using ECC and GTS, what is ususally done with the "Foreign Trade" fields in the ECC? Apparenlty these do not transfer to GTS. This may be confusing to the user to present fields that do nothing. What is the best practice for addressing the Foreign Trade tab in ECC?
Thank you!

Hello,
I am assuming you are talking about the fields that are found in the Delivery documents in the Foreign Trade / Customs Tab.
Actually, these fields are still used. Some of them are transferred to GTS and some do not need to, but are used for Intrastat Reporting. The fields taht are transferred to GTS are the following
In headder its the ones under Handling & Geography. At item Level its the ones in Origin/Destination/Business.
Regards,
Marc

IDocs have disappeared between ECC and PI

Hi All,
A couple of days ago 3 idocs went missing between ECC and PI.
That day 293 idocs of the same message type were sent to the same partner through PI. In PI we only found 290. The 3 IDocs were sent in the same second in the early afternoon. All IDocs before and after were processed correctly.
The IDocs are unknown in IDX5 and in Runtime Workbench on PI.
The idocs were not in SM58.
I found them in WE05, with the correct status. The status update from status = 01 to 30 to 03 took place in the same second.
25 seconds later, new IDocs of the same message type were created and processed successfully by PI.
At the time the idocs disappeared there were no problems with either ECC or PI, as far as we know.
The interface is live for more than 2 years. In the meantime no changes have taken place.
I have read the links below
Finding missing IDocs
Interface Troubleshooting Basics
It's a mystery to me. Where have those idocs gone?
Anybody any idea?
Kind Regards
Edmond Paulussen

Hi Edmond,
On the SAP PI system have a look in transaction IDX5. Take the IDoc number that you could not find in PI and search them in IDX5.
If you cannot find those IDoc in IDX5 then they never reached PI.
Regards,
Jannus Botha

ALE configuration in ECC and 4.7

Hello guys
Is there any difference in ALE configuration in ECC and 4.7??

Summarised step follows below...
ALE settings for IDOC
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Also read this blog <a href="/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi Configuration for Pushing IDOC's from SAP to XI</a>.
Do a SDN serch and you can get a lot more that this
~SaNv...

Keeping Business Partner numbering same in ECC and GTS

Hi Experts,
Does anyone have experience on projects/clients where the Numbering for Customers/vendor in ECC and the related Business Partner in GTS is same?
For an example: Customer# 12345, BP#12345 in ECC.
In GTS: BP# 12345.
We are planning to use MDG system for Master data distribution across systems. I believed it is possible to keep the Numbering same just like we do in SRM.
But on checking further in detail, I feel it is not possible in standard. Can someone provide their inputs on if this can be achieved with standard setup.
On checking the code in GTS, I can see Number range group in GTS is determined in FM BUP_CHECK_GROUPING. This FM uses Internal numbering always when there is no BP# is sent from ECC for the Customer/Vendor#. Only if the BP# is sent, system will look for external number range.
In ECC, the standard code is always keeping BP# and Numbering grouping as blank/space in FM /SAPSLL/DEBMAS_1006_MAP_R3. Which means standard SAP doesn't allow keeping BP Numbers sync'd in ECC and GTS.
So, I am not sure if this is possible with standard setup. Can someone confirm please?
If not possible, I will look for enhancements.
Thanks in advance!!!
Regards
Dhilipan

Hi Dhilipan,
I briefly checked the program code. In the API1006_HEAD structure, field BPARTNER is transferred to GTS with value <SPACE> (hard-coded in Function Module /SAPSLL/DEBMAS_1006_MAP_R3), and I think that might be the field you'd need to use.
From what I can see, that field is used as the Partner Number in GTS if it is filled; otherwise field EXTERN_NO is used. So it would be worth a try (in debug) to fill the BPARTNER field (max. 10 characters) and see what happens.
I'm not sure how the Number Range is assigned - it could involve some "profiles", or perhaps be a nice surprise. I'm sure you'll have fun in finding out: do please let us know.
Regards,
Dave

Data Inconsistency for 0EMPLOYEE between ECC and BI

Hi,
We do a full load to 0EMPLOYEE using 0EMPLOYEE_ATTR from ECC. There were records deleted for lot of employees (some action types) in ECC. This has caused data inconsistency for 0EMPLOYEE master data (time-dependent) between ECC and BI. In BI we have more records for these employees (Additional records have time-dependent range that were deleted from ECC but still exist in BI). These employee records are already being used in lot of InfoProviders. Is there an efficient way to fix this issue? One of the solution is to delete data from all InfoProviders and then delete from Master data for 0EMPLOYEE, but the deletion of employee records can happen quite often, so we don't want to take this route. Also, I tried to re-organize master data attributes for 0EMPLOYEE through process chain, but that didn't work either.
Message was edited by:
Ripel Desai

Hi Ripel,
I share your pain. This is one of the real pains of Time-Dependant master data in BW. I have been in your exact position and the only way round the issue for me was to clear out all the cubes that used 0EMPLOYEE and then delete and re-load 0EMPLOYEE data.
I know this responce doesn't help you but at least you are not alone.
Regards,
Pete
http://www.teklink.co.uk

Optimize the performance of the RFC call between ECC and CRM

Hi,
We are planning to extract sales orders, sales activites and service orders to dispaly it on the PDF factsheet of the account.
As of now, the PDF factsheet takes a long time to retrieve the data from ECC to CRM. Can you please suggest us on ways to optimize the performance of the RFC call between ECC and CRM.
Thanks in advance,
Vamsi.

Hello,
[SAP Note 636906 |https://service.sap.com/sap/support/notes/636906]is quite useful here.
Many times, the performance is poor due to function module CRM_CCKPT_EXPORTSUMMARY. This function module gets the customer number, the sales organization and the fact sheet view. If in CRM customizing, you use complete view (001), then all the views in ERP including all the info blocks will be retrieved, which will cause performance issue.
To solve the issue, please use a limited view to retrieve the data from ERP - especially a view, which does not contain info block 013.
Hope it helps
Joaquin

Withdrawal Qty don't match between ECC and APO

Hi Experts.
I am facing a discrepancy for Withdrawal Qty between ECC and APO before delivery/PGI creation.
In ECC T.code MD63 I am able to see the withdrawal Qty as expected but in APO a duplicated withdrawal Qty is being created. But this is not happening for all materials, only some specifics materials. I did a check in Material Master data and I have no found any difference between a material that is working and one that is not working...
Can please somebody explain me why APO is dobling the Withdrawal Qty.
Thanks a Lot
Daniel Campos.

Please check wthether you have dp index duplication in this problem.
Please follow the process.
For this process , you need to follow these steps .
1. From the table /SAPAPO/MATKEY , find the product id of the product for which you feel there is problem .
2. Find the location id from table /SAPAPO/LOC for the location.
3. Use the above found 'product id' and 'location id' to find the dp index in table "/SAPAPO/DP_HEAD " .
Enter the planning version ' 000 ' in this table . If there is some error you will find multiple entries of the 'dp index ' in this table for the ' 000 ' planning version. If error found use below program to delete the dp index .
4. Precaution should be taken before we delete the 'Dp Index' as the consumption history is lost due to this . In the program 'Z_DEL_WITHDRAWL' there are 2 check boxes " update " and " list ". List will show the DP index and update will delete it. Need to extremely careful in this program as wrong selection will cause problem .

How to synch calendars between iPad and MacBook Pro?

How do I synch calendars between iPad and MacBook Pro?

Thank you for your help. However, I still have no connection; could it be that the laptop is signed in through my account and the iPad through my wife's?
If so, must I delete her iCloud account and reestablish it as mine?
Thank you

Difference Between ECCS and BCS

Hello Everyone
Can any one explain briefly the difference between ECCS and BCS.
Your response will be highly appreciated.
Regards.
DC

Quick answer: EC-CS is on the R/3 platform, while BCS is on the BI platform.
This topic has been discused numerous times - please search the forum for more details if required.

Synching configuration between ECC and GTS

Similar Messages

Maybe you are looking for