Synching Palm TX and Windows 7 64bit

I do not have bluetooth on my computer. What is the best way to sync my TX? I have searched the forums and have not found any solutions. My computer is a Dell laptop if that matters and the Windows 7 is factory installed, 64bit. If there is a way to just transfer via the SD card I would be thrilled.
Post relates to: Palm TX

Hello 2marc: Your solution is right on. After my posting I got a Blue tooth connector ($19.95) and simply followed the Palm directions I downloaded and connection occured. The problem of my TX expense records being transfered is still unsolved. Palm support advised that the third Party that designed the software for the TX had not yet updated its software to 7. I have XP on another system so I am still functional but I am still searching for a solution to my "TX - 7 - Expense Report" problem. Thank you for your input. Brad

Similar Messages

PALM VX and Windows Vista 64Bit

Hey I have been searching all over the site for a solution to my problem and I don't think there is one. I have a Palm VX and I am trying to sync it up with my new Vista Machine. The catch is that my OS is 64-bit I have seen that it says Windows Vista 64 is not compatible, but I have installed Palm Desktop 4.414 and it works fine. But before I order a serial to USB adapter I wanted to know for sure if there is any way around this problem.
Post relates to: Palm Vx

I just recently purchased a new PC with Windows Vista 64-bit. Although I was told and read through postings such as this that synching my Sprint Palm Treo 755p would not be possible. As an IT professional, I was not willing to take no for an answer. I spent the day doing research and am happy to report that as of yesterday I was able to get my Treo to sync up with my Outlook 2007 on the Vista 64-bit OS.
Here is how I did it:
1. I determined that since the Palm Hotsync cable didn't have any drivers to support the 64-bit, I would sync using my Bluetooth dongle.
2. Went to website for dongle (BlueSoleil) and found the Vista 64-bit drivers and downloaded those.
3. Set up the Bluetooth as a network opening Com 5.
4. Set up the Hotsync for network using Com 5
5. Went to Palm website and downloaded the conduits for Outlook 2007
6. Did a Hotsync via Bluetooth with the handheld overwriting Outlook.
7. Downloaded Chapura Pocket Mirror and set the conduits for Outlook.
I am now syncing like the Titanic.
Post relates to: Treo 755p (Sprint)

Solution Center problem with HP Office Jet J4550 and windows 7 (64bit)

Hello All,
I have a problem. I have the Solution Center and a HP Office Jet J4550 and windows 7 (64bit). When ever I open the solution center, the solution center says " HP office jet J4550 series disconnected" When I open HP document manager, I can access the printer. Additionally, when I run the HP Print Diagnostic Utility 4.0, it sees the printer, no issues. I can print test pages. No issues. I downloaded the latest driver from the HP site (OJJ4500_Full_13, 299,359KB) Your insight is appreciated.
Thank you
Roy B

I have a similar problem with the J4580 and my new Windows 7 64-bit laptop. HP Solution Center says that the printer is disconnected. Furthermore, it can print some documents (short ones), but it was unable to print a 1-page 5MB pdf file. The printer truncated the page after printing just the top 10%. The printer is OK with my wife's Windows 7 32-bit laptop.
I've seen many other people complain about similar problems in this and other forums. Apparently the driver for J4500 printers is not compatible with Windows 7 64-bit. Can HP please provide an updated driver or patch?

Audigy SE and Windows 7 64bit hiccups when i listen music and open a picture

LAudigy SE and Windows 7 64bit hiccups when i listen music and open a picture' Hi,
PC September 2009 ->> MSI P35 Neo 2FR , E8400 , Audigy SE , Windows 7 64bit RC build 700 = crystal sound , no hangs or hiccups, worked flawless in any application
PC Octomber 2009 ->> AsRock P55 Pro , Core i7 860 , the same Windows 7 64bit RC build 700 and the same sound card Creative Audigy SE with the same drivers? i have problems when i liste music on any player.
Symptom = i listen to music and when i open any random picture/program the music hiccup/hangs for a milisecond.
i tried every driver on this site and every setting on the audigy control manager , nothing worked.
i tried to update de DirectX .... i can't find any cure to my problem
i need help please[img"]http://xtrempc.ro/forum/download/file.php?id=4035&mode=view" height="83[/img] width="54">
[img"]http://xtrempc.ro/forum/download/file.php?id=4034&mode=view" height="8[/img] width="53">
[size="">Sorry 4 my bad english

i tried even PCI Latency 64 and 96 ... no change

Microphone , Audigy Se and Windows 7 64bit

*Microphone , Audigy Se and Windows 7 64bit's I have wasted several hours today trying to resolve this issue upto and including trawling the internet for a solution and completely removing and reinstalling drivers from disc and updating twice. Ultimately I downloaded an update from WIndows - Absolutely nothing, nada works!
I have the Mic Jack for my headphones plugged into the blue line in port - tried and tested on my system card (which works) but I consistently get Line--in Currently Unavailablke for this port suggesting that Creative are totally out to lunch on this one.
I have right-clicked and set levels, tried setting it as default, etc, etc, etc... nothing.
Has anyone succesfully got their mic to work uunder Win 7 64bit's
- Love how it says on the box that Vista nad WIn 7 are supported,,,? guess the partially bit was omitted!
I loathe wondows on any given day of the week but my Mac is currently down so I have no choice but to use this, my wifes machine... NOthiong but lost time whereas if I were on the mac I would be using that time producti'vely, with working software too I might add!
Hope someone has a fix for this because this machine is just one reboot away from going out the frogging window!!!

'sHi,
Are you using this driver? Are you getting no sound from your microphone or is nothing being recorded?
Please go to Control Panel, Sound make sure that the Microphone option is set as default and that the mic levels are adjusted accordingly, not mute.
If this is not working for you, Customer Support can be contacted using this http://support.creative.com/Downloads/searchdownloads.aspx?filename=

Install only 32bit version of AX Flash Player for IE8 and Windows 7 64bit

Hi,
For several reasons I would like to install only the 32bit version of Flash Player AX for IE 8 and Windows 7 64bit.
It was possible to do it when the installers where separated but I see no information how to do that now.
It is very convenient for me to have my 64 bit IE 8 browser without Flash that I use to browse and not get annoyed by the flash on the web and use the 32bit IE 8 on youtube, vimeo, etc when flash is necessary.
I hope the option to choose which version to install will get back if it is not possible now.
Please let me know if such kind of request should be made somewhere else as new feature or whatever.
Thank you.

That was the first thing I tried. It either works on both or disables on both versions. Something is messed with the settings as well, or has been made that way on purpose. Also the next thing I tried was to uninstall only the part residing in System 32 (leaving the one in SysWOW64) but the result was both not working after the uninstall. It remained in Programs but wasn't working anymore in both versions of IE 8. So I just put back the latest 32bit version which is not security wise..

Palm maim and windows Vista

I have Palm M500 and window vista 32. I downloaded 6.2 because I lost the software. Will not syronize(sp). Do I need to download a driver.
Post relates to: Palm m500

Your question is frequently asked and answered in the Windows Hotsync board. You need to download PalmHotsyncSetup from www.pimlicosoftware.com
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Show and Share with IE8 and Windows 7 64bit

So we are running 5.2.1, and we create a live event. We have a Windows 7 64bit machine running IE8 in 32-bit mode. Everything appears to start fine, the video plays, we get audio, slides load, the different frames pop up etc etc. However, after a time the video will halt and slide updates will stop. It's almost like it just drops the connection due to inactivity. If the user shuts down the browser completely are goes back to the page it will display fine once more only to stop after so many minutes of playing once again. I've messed around with the flash settings to no avail, and have yet to find anything in IE that could account for this. Maybe I'm overlooking something, anyone have any ideas?

Well now it seems that I have another problem too. Now my iTunes can't find my iPad at all, no error messages or anything.
Now the error message was one of these 4: (0xE8000065)(0xE800000a)(0xE800006b)(0xE8000001)
I can't remember which it was because I can't get any error messages anymore.
By the way, here is a list of what I have done already to make things work.
-uninstalled/reinstalled iTunes 9.1 many, many times in different folders too.
-updated all my drivers
-checked that windows can find my iPad and it does.
-Shut down my F-Secure firewall ect. and trying to connect iPad then.
-I have done everything what you possibly can from this site http://support.apple.com/kb/TS3221
-my USB ports work fine with every other devices like my 500gb harddrive, mouse, keyboard ect. and I have tried to disconnect every other USB devices except iPad and still not working.
I'll try deleting my USB drivers now, reinstall them and even if after doing all that and iPad still not connecting to iTunes.. well then it's our of my league, I don't know anything more to do.
Oh, and by the way. I called to Apple support and they only said that there shouldn't be any problems with Windows 7 and iTunes and they couldn't help me very much.. And my iPad works fine with other computers that are in my house.

Audigy 2 Value and Windows 7 64bit driver don't work

my first Audigy SE before Audigy 2 Value (SB0400) worked perfect on Windows 7 64bit
with Audigy 2 Value SB0400 i tried 3 drivers , including the beta from the creative support , original and daniel_k driver and after reboot the windows hangs at LOGO and stays there.

Re: SB Audigy 2 ZS and Windows 7 - Full Package driver?T While Creative has written new drivers and some applications for Windows 7/Vista for the Audigy, they have not re-written or updated all of the original applications on the CD. This card is very old now. What Daniel K. did was take all of the applications or most of them, and tweaked them to properly install and include themselves in the registry on operating systems other than Windows XP. For the full and most recent package, check here:
http://forums.creative.com/t5/Sound-...009/td-p/53838
If the application you want is not included in his package, then you can try downloading the official Creative version and install it on your system in "compatibility mode" by right clicking the file, and choosing properties, and then the compatibility tab and choosing "Windows XP service pack 2 or 3" and it may or may not function.

Secured HDD and Windows 7 64bit

I Buy a Secured 500 HDD. I am very nomadic and connect to any type of computer.
My portable is: Windows 7 64bit
At home i have: Vista 32 bit
At the customer's site: any type of OS
I am no able to install the bundled software (biologin) in Windows 7. The error i receive refer to an incorrect digital signature.
There is a driver for this OS ?
I cannot find one in support & downloads.

I had the same problem.
I have already contacted Toshiba support.
They told me this is a problem of Driver's Signature. They are not compatible with Windows 7 64bit.
They told me that Windows 7 is not in the compatibility list and maybe no updated drivers will be deployed.
I this this is a kind of joke. Toshiba still sells this product but it is not compatible with current Microsoft OS.
I will never buy Toshiba products if this is its support.

Elememnts and Windows 7 64bit

Will Elements 5 and/or 6 run properly on Windows 7 64 bit please

Not officially. Some have run it anyway and identified some of the pieces that don't work. Even PSE 7 was not officially compatible although it only had a few minor things that didn't work. PSE 8 was the first to officially support Windows 7 64bit.

Y410 and windows 7 64bit

Since upgrading to windows 7 64bit I have a couple items that I can't seem to find drivers for. I look in my device manager and there are 3 items that are not working correctly. Two of them say Base Sysytem Device and one say Unknown Device.
Any help with these is greatly appreciated.
Thanks

Probably the card reader. Try the Vista 64 driver
for your model of laptop and type of card reader
if available.

Production Premium CS4 and Windows 7 64bit

How is Production Premium CS4 working with Windows 7 64bit? Is it compatible?
I checked the System Requirements and it does not mention Windows 7.
I just wanted to check and see what other user experiences have been like.
Anything to look out for?
Thanks!

CS 4.1 worked the same as under XP. I think I had some minor issue with DL & AE. Don't clearly remember because I've been using CS5.5 since it came out. If you can afford the upgrade, Just Do It! You get Audition and lots of 64-bit power & speed. If you've got a decent nVidia card, downoad the CUDA hack (which basically consists of changing one line of text so the card is recognized) and get even more juice.
CS5.5 is Da Bomb!
....Or you could buy a Mac and go with FCPX. Now there's a real bomb!!!....LOL, ROFL,

Tungsten C, Palm OS, and Windows Vista--do they work

moving to Windows Hotsync board
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Hi, and welcome to the Palm Support Community.
I have moved your post to the Windows Hotsync board, where you will find lots of information about syncing older Palm devices with Windows Vista. I suggest you begin with the very first post in this board.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Palm Pro and Windows 7

Anybody have any success syncing their Palm pro with windows 7. My understanding there is no software that works. either Palm or Microsoft drop the ball on this one. I am taking mine back to sprint, I didnt go to buy a stupid phone! I hope Palm READS THIS
Post relates to: Treo Pro T850 (Sprint)

What exactly have you tried? I'm assuming you'd like us to help, but without giving us any information as to what software you've downloaded (Windows Mobile Device Center), what version of Win7 (32bit or 64bit), or any error messages received, your post appears as just a "rant"...
WyreNut
Message Edited by WyreNut on 11-15-2009 06:26 PM
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Synching Palm TX and Windows 7 64bit

Similar Messages

Maybe you are looking for