Synching photos issues on ipod nano 7th generation

I have a windows 7 64 bits PC. In the PC I created a folder with 4 .jpg photos. Using the iTunes I tried to synch tose photos with my iPod nano. I got 0 photos on the iPod. I already updated the itunes and iPhone software to the latest versions. The issue was not solved.

Before you sync, go to "music" in ipod menu (in Itunes) and select "sync photos". This is not selected by default. Select accordingly (same with music, podcast, etc.) then perform the sync again. Cheers!

Similar Messages

TS1363 My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue?

My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.

uninstall all iTunes,5 programes,this worked for me after reinstall them

Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second

ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second page of icons, black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

I had this problem as well. This is what I found by searching online. I tried the fix on my nano 7th gen and it worked. I hope this helps you. Make sure to use two fingers for sliding and double-click the icons to get into settings. Good luck.
It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/HT4317
To turn off VoiceOver on iPod nano using VoiceOver gestures
From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
Slide one finger around the screen until you hear Settings.
Double-tap to open Settings.
Slide your finger up or down the screen until you see or hear General, then double- tap.
Slide your finger up or down the screen until you see or hear Accessibility, then double-tap.
Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap.
Double-tap when you hear "VoiceOver switch button on."
You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
Note: You can also turn off VoiceOver by resetting your iPod.

IPod nano 7th generation battery issues

I am only getting 2.5 hours of playback after a full charge to my nano. My older iPod (5th generation) would last for days before it would need a charge. Is this an issue that others have experienced or is this an isolated issue with a defective battery in my unit?

Hi fgduthie,
If you are having persistent unexpected shut down issues with your iPod nano, you may find the troubleshooting in the following article helpful:
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
Regards,
- Brenden

Ipod nano 7th generation major UI issues !

ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second page of icons, black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

I had this problem as well. This is what I found by searching online. I tried the fix on my nano 7th gen and it worked. I hope this helps you. Make sure to use two fingers for sliding and double-click the icons to get into settings. Good luck.
It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/HT4317
To turn off VoiceOver on iPod nano using VoiceOver gestures
From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
Slide one finger around the screen until you hear Settings.
Double-tap to open Settings.
Slide your finger up or down the screen until you see or hear General, then double- tap.
Slide your finger up or down the screen until you see or hear Accessibility, then double-tap.
Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap.
Double-tap when you hear "VoiceOver switch button on."
You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
Note: You can also turn off VoiceOver by resetting your iPod.

IPod nano 7th generation sensor issue

I just got an iPod nano 7th generation. I'm trying to figure out the nike fitness section. It keeps telling me "not linked to sensor" when I try to set up a run. I was under the impression that I wouldn't have to buy a separate sensor. Is this true? Can someone help me figure out what to do? Thanks!

You need to disable the nike + sensor in Nike app in your ipod. When disabled you will be able to do run/walk workout using the built-in pedometer. Cheers!

IPod Nano 7th Generation - Bad out of the box?

I just purchased the iPod Nano 7th generation today and came home to sync it with iTunes. iTunes recognizes the device for a second then I receive a "Disk was not ejected properly. If possible, always eject a disk before unplugging it or turning it off." message. I can see the iPod in iTunes for a second then it disappears. As I keep it plugged in it will recognize, disappear, reapear then disappear again.
I purchased an iPod Touch 5th generation today and that is working just fine (as well as synching my other iDevices). Is this nano bad out of the box?

Same thing happened to me. It did download the playlists I wanted, but the next time I plugged it in it acted as though it was being plugged in for the very first time, (regsitration and set up etc.)
But the really bad news is the BATTERY LIFE. maybe get one hour of play time before it drains to zero.
Anyone else have this issue?

I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?

I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?

Hello there, kiwilucea.
The following Knowledge Base article offers up some in-depth steps for troubleshooting your issue:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Keep in mind if you get to Step 12 Reinstall iTunes, those steps need to be followed exactly as outlined for the reinstall to be effective.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?

My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?
When I connect my iPod to my computer, nothing happens. I've read the tips in the section "support" and I noticed that maybe Windows 8 is not one of the operating systems that are compatible with an iPod nano 7th generation. If I'm right, what can I do if my only device is a Windows 8?

Hi, Grafiti.
Thank you for the question. Below, I have attached a couple troubleshooting articles that will help resolve the device not being recognized by iTunes.
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
If the issue still persists after processing these steps, see the section in the article below labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8.
Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

IPod Nano 7th Generation not charging

Has anyone had trouble with their iPod Nano 7th Generation not charging?

Hi ncpower,
If you are having issues charging your iPod Nano, you may find the following article helpful:
Apple Support: Charging your iPod battery
http://support.apple.com/kb/ht1384
Regards,
- Brenden

ITunes doesn't recognize IPod Nano 7th Generation

ITunes doesn't recognize my IPod Nano 7th Generation. I get a message saying "An IPod has been detected but could not be identified properly". My Windows 7 computer shows the IPod Nano as a removable drive until I launch ITunes at which point it disappears from the list of removable drives. I even disabled my security software (Norton 360 but not Spybot S & D) and it didn't solve the problem. Any suggestions..............Thanks

Hello Aruniem,
The article linked below provdies information and steps that can help resolve this issue.
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/TS3218
Cheers,
Allen

Ipod Nano 7th generation touch interface is now screwed with due to apple update.

Hi, I recently purchased a new laptop switching over from a macbook pro 2010 of which the logicboard died. In this newly configured windows 7 64 bit laptop I downloaded the latest itunes. I then connected my ipod nano 7th generation to it and it requested to format it since it was formatted for a mac. I did so and restored my ipod nano 7th generation. After this however my previously perfectly working nano touch interface (swiping, touch to select) is now completely messed up. This has to be due to the formatting and/or the new nano update or itunes update from apple. I can't even swipe to the right or left to move between screen interfaces on my nano anymore. As well the touch icons require double taps and have rectangular white selection boxes over each icon (NOT NORMAL)
Overall I am very displeased and want apple to fix this with either a new firmware nano 7th generation update or apple itunes update for windows 7 64bit. I'm thinking of buying a replacement iphone 4 but now that this issue is prevalent how can I TRUST Apple that nothing wrong will occur with connecting a new iphone 4 to my itunes on a windows 7 64 bit PC.
I am NOT the only one with this issue as you can check out for yourself: http://answers.yahoo.com/question/index?qid=20130727205241AAOmiuC
REASON FOR POSTING THIS HERE: I want more exposure to this issue. I couldn't get access to customer support since my ipod nano 7th generation is over a year old. This is cruel but whatever, Apple does what it wants and I will post this here to do what I want. Gain exposure to this defect that clearly Apple is not addressing since the above link displays a user with the same issue and posted the problem 3 months ago.
DO SOMETHING ABOUT THIS APPLE

Hi ImAMinion.
Very good question. I should have explained that part. VoiceOver changes how the navigation functions so it's a little tricky.
From the home screen I got to settings by swiping up and down instead of the normal left and right.
To open settings I first tapped once on the settings icon so that the box appeared around the icon. Then I double tapped the icon to open it.
I repeated the "tap once to get the box then double tap to open" process to navigate through the settings menu. Navigate to: Settings -> General -> Accessibility -> VoiceOver -> set to off. Once it's off the navigation will return to normal.
Hope that helps.

My new ipod nano 7th generation will not sync with i tunes, followed all the apple on line trouble shooting ideas, this device will not show up in itunes but i can see it from explorer, windows 7 user.

ipod nano 7th generation will not sysc with i tunes is updated , device does not show up in itunes under devices but shows itself in explorer.ran diagnostics failed sync. about ready to take this back to best buy.

yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed. click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
click on music check mark music done and sync
problem solved
thanks apple

I just recently updated my iPod Nano 7th Generation, and, after the upgrade finished, my iTunes library, playlists and all, vanished. How can I restore the playlists and songs to iTunes?

I updated my iPod Nano 7th Generation, and it wiped my iTunes library. I no longer have my playlists or movies. I was able to recover my music, but the many, many playlists I had, I could not recover. Is there any way I could recover them?

Hello apbvieira,
It sounds like your iPod Nano is not recognized in iTunes anymore after a recent update. I recommend the following article to help you get that in order named:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
1. Start with the iPod Troubleshooting Assistant
If you haven't already done so, use the iPod Troubleshooting Assistant that applies to your iPod. This will often solve your issue.
If you're still experiencing the issue after going through each of the steps in the assistant, continue with the steps below in this article. The most likely solutions are listed below (for both USB and FireWire (IEEE 1394) iPod connections). Check each section starting from the top of the list to see if that is what's keeping your iPod from appearing.
Note: To determine if your iPod syncs via USB or FireWire, check the table in the Additional Information section below.
This step will get you started, but there are additional steps in the article if you need them.
Thank you for using Apple Support Communities.
Regards,
Sterling

Just recieved ipod nano 7th generation and when plugged in to computer it is not registering on computer or with itunes

Just recieved a brand new replacement ipod nano 7th generation and when plugged in to computer it is not registering on computer or with itunes, I have tried resetting ipod. I have uninstalled itunes and reinstalled itunes. I have tried various cables and know they are compatible for charging the ipod, what else could it be?
Darlene

Hi Darleneann8,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod nano not being recognized on your PC:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
I hope this information helps ....
- Judy

Synching photos issues on ipod nano 7th generation

Similar Messages

Maybe you are looking for