Synchonize cusotmer master data from SAP R/3 to CRM

Dear Sir,
My SAP R/3 is ECC6 , but my crm is CRM5.0
I have the question that I would like to synchonizat data ( field in Sales Area data : Sales district, Sales Office , Sales group, customer group ) in R/3 and link to CRM ?
Where can i find these fields in CRM?? and where can I find the mark for delete for customer master data field in CRm Please kindly advise
THank you and best regards,
Vimol

Hi Vimol.
If the CRM and ECC are all connected (like RFC's/logical systems/...) for synchronizing the data you need to do the initial loads. SAP has different objects for different data loads. Please follow B09_BB_ConfigGuide_EN_US(CRM Replication) for the same.
Hope this helps,
Karuna.

Similar Messages

How to load master data from SAP R/3 system like Customer master...........

How to load master data from SAP R/3 system like Customer master, materioal master , vendor master.............

Hi Bramha,
Check ...........
Re: master data loading in BI 7.0
/message/4708129#4708129 [original link is broken]
Re: Master data loading.
Regards,
Vijay.

Loading Master Data from SAP R/3

Hi Friends.,
           I'm going to load master data from SAP R/3 FI Modules to BW, but what do these objects mean by ?
0LOGSYS - Source System
0SOURSYSTEM - Source system ID
                 I'mn't understanding clearly, and also transfer rules aren't mapped properly.
   can anybody clarify these things ?
Regards.,
Balaji K. Reddy

Hi Balaji,
You need to use these objects when your BW is feed by different source system and you want to map differences beetween Master and Transactional Data fed by the different systems (different R/3 - Flat File - Legacy Systems - ...).
If you do not have this situation you can avoid to use these objects (probably you find these objects in Tab compound of your MD).
Ciao.
Riccardo.

BPC Error while loading master data from SAP BW

Hello Guru,
I have NW BPC 7.5 installed on BW server. Currently i have started to work on one application where i have to load master data first. I am loading master data for cost center.
I looked into the process chain "BPC: Import BW InfoObject master data" and i found that few processes are in GREEN color and few are in RED color (Display). is that correct or not ? then as per some of the thread i went to "BPC: Convert BW infoObject master data" --> SOURCE_TYPE = IP and added one parameter "FORMULA_FILE_NO". Then i saved this process chain and activated it.
I created transformation file in BPC and it got created successfully but while i try to load packages it throws me error.
Q. Do i need to have entire process chain with all processes in GREEN to have the master data in BPC ?
Q. Do i need to activate any BADI's for this or not ?
I appreciate your help in advance. I trie

Hello Guru,
Currently i am getting below error while loading costcenter master data from BW to BPC.
Task name MASTER DATA SOURCE:
Record count: 189
Task name TEXT SOURCE:
Record count: 189
Task name CONVERT:
No 1 Round:
Info provider is not available
Application: ZRB_SALES_CMB Package status: ERROR
Anybody can tell me, if i have missed anything ???
Regards,
BI NEW
Edited by: BI NEW on Feb 23, 2011 12:25 PM

Master Data from SAP BW to APO BW

HI Guys,
I have master data (0Material, 0Customer etc) coming into BW from ECC. Now, I need to pull this master data from BW to APO BW system. I will appreciate if any one could let me know the best way to pull this master data into APO BW system and how will we do that?
Thanks,
Manmit

Hi Manmit,
It is just like pulling data from R3,u need to have a RFC connection between APO and BW .....Which will be done by the basis.
Then trigger the data from APO to BW like u do for R3 or you can use REMOTE process chain to trigger the PC from APO itself depending on the requirement.
If u trigger the PC in BW,the data will flow to APO-BW and can be Viceversa and like any other PC it can be scheduled.
RSPC>processchainsTools>General Services-->Remote Process Chains.
We have give some conditions here...
YOu can seach the FORUM for REMOTE PCs and its applications.
Rgds
SVU123

Demo - Extraction of Customer Master Data from SAP R/3 ECC6 to MDM5.5

Hello,
I am new to MDM . Would appreciate if someone can give a solution to the below request.
We are doing a demo project in our Company to extract all the master data related to SALES cycle. We are doing an extraction of Customer Master Data. Currently we have the unlicensed version of MDM and very soon we will get the licensed version.
We have the Customer Master Repository created in MDM Console. The IDOC type we are using is DEBMDM05.
Is there a easy way to map the fields of IDOC to the MDM Repository. Right now we are doing a manual process of comparing the IDOC fields and MDM Repo in an excel but this is tedious and time consuming.
Can anyone suggest an easier way to identify so that we know which fields match correctly.
Thanks
Leena

Hi Leena,
First of all you have 2 options to generate IDOCs from SAP R/3 system
1.mdmgx>one IDoc per record
2.mdm_clnt_extr>for generating single IDoc having entire set of records.
Secondly,if you want to get the data mapped automatically,you should use standard maps provided by SAP(Business Content).
If at all you have created new fields then you should manually map those fields.
If any other queries pl ask
Reward points if found useful
Regards,
Pramod.

UPLOAD MASTER DATA FROM SAP GL TO ACCOUNT DIMENSION

hi
how can i upload master data (chart of account) from BW 0GL account info object to BPC Account Dimension ?
how can i upload the hierarchy, there is no hierarchy in ECC for the chart of account

SAP offers free content + documentation in the form of rapid-deployment solutions (RDS).
In the Extended Financial Planning Rapid-deployment solution, there is a module called G/L Financial Planning which includes the full load of SAP-based account dimension from SAP ERP to BPC via BW. This content introduces BPC-based Package Links as a best practice way to load master data (including the account hierarchy and transaction data). You can download the content and documentation from the highlighted page above or HERE.
SAP also offers free training on the EPM rapid-deployment solutions in the EPM RDS Academy 2015 on SAP JAM. If the link to the Academy does not work, please register HERE and SAP will invite you.

Update Master Data From SAP R/3

Hi ,
Im new for CRM. How to upload the Master data ( Customer , Material ) to CRM.
Any configuration possible .. pls let me know
Prakash

Hi Prakahs,
You have to do a initial download in order to connect both systems and make data transfer process available.
You can guide from SAP best practices allocated in:
<a href="http://help.sap.com/bp_crmv340/CRM_DE/BBLibrary/html/BBLibrary.htm">http://help.sap.com/bp_crmv340/CRM_DE/BBLibrary/html/BBLibrary.htm</a>
Please follow building blocks C73, B01, C71 y B09 in order to do it.
Hope this helps
Regards
Javier Merino
Please reward answer if you're satisfied.
Message was edited by: Javier Merino Vivar

Send changes of Artical master data from sap to nonsap (idoc outbound prog)

Hi Experts,
I am new to interfaces
I have one requirement in Idocs, i.e the changes of artical master data is send to sap to nonsap system through idoc.
idoc type is ARTMAS05, msg typ is ARTMAS.
I am giving some information for my object.
For article (MATNR) by site (WERKS plant)
     If MRP Type (MARC-DISMM) = u201CX0u201D
          Then if changes to fields:
          MARC-KZAUS     Discontinuation ind.
          MARC-AUSDT     Effective date out
          MARC-NFMAT     Follow-up article
Then send idoc type ARTMAS05 with the following data
segment E1BPE1MATHEAD
     MATERIAL
segment E1BPE1MARCRT
MATERIAL             PLANT                     DISCONTINU
EFF_O_DAY            FOLLOW_UP
Systems Referred to:
The planning system for our client is nonsap system. This software requires to be informed of relevant changes on articles in order to start its planning runs. When an article is superseded by another we have to send the replacement article (if any) as well as the discontinuation date.
Dependencies/Prerequisites :
     Change pointers for Article master active
     Change pointers active for fields:
     MARC-KZAUS      Discontinuation indicator
     MARC-AUSDT     Effective date out
     MARC-NFMAT     Follow-up article
Idoc ARTMAS05 required with reduction in order to only send relevant fields
Filter to only send idocs for materials in the u201CAutomotiveu201D type where MARC-DISMM = u201CX0u201D.
So this is my requirement, please send some sample code or idea how to complete object.
with regards,
gs reddy.

Hi,
All the details mentioned seems to be correct.
just change one "automotive" material and check change documents are getting generated.
i hope partner profiles are already in place.
once change docuements are inpalce check RBDMIDOC program is scheduled in back ground or you can manually execute the program for testing.
and check the IDoc generated.
do you want supress some segements?
di your NOn-sap ssytem can accept Idoc?
Suresh

To Replicate Material DATA from SAP R/3 to SAP-BW

Hello,
I need the Material Master data from SAP R/3 in SAP BW. The material Data is to to moved in Info object: 0MATERIAL. In SAP R/3 the data for material is stored in table:MARA. Which Business content needs to be activated in BW.
Please give the step by step method to push this data from R/3 to BW.
What are the pre-requisites for the same.
Thanks for the information.
Regards,
Sumita

Hi
If you want to get data for material...
go to R/3 Side and tcode rsa5>find for 0material>you will get 0material_attr,0material_text and some hierarchy ..
Activate these data sources...
Goto BW side transaction RSA1-->replicate the data sources....
Go to Business content tab of the RSA1-->take grouping as 'in data flow before'
and select object type as info object in the left pane,find for 0material object.
drag and drop to right pane...click on install...now your 3 data sources(0material_attr and 0material_text and hierarchy will be assigned to 0material)..now you can create infopackage and load data(it is master data only)...
If you want to load transactional data,first of all you need to find out the cube and data sources to be loaded...once you find out your data sources,do same as above in r/3 side..and bw side take your required infocube as same as above...
If you want to get data specifically from mara table,Create a generic data source on table mara...
RSO2-->data source type transactional>give name and then click on create-->give description and application component to which this belongs to and give the name of the table(mara in table field) and then click on save...your generic data source is ready...go to rsa6 and there you can choose required fields for selection..
Then go to bw create infosource,cube and assign all these and load data...
Hope it helps
Thanks
Teja

Set up for Extraction the data from SAP ECC system

Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
Holger

Hi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you!

How to Send the material master data from sap4.6c to ECC6.0

Hi
Friends this is shalini Shah, i got one requirement that is
how to send the materail master data from SAP 4.6C to ECC6.0 using XI.
i know the file to idoc and idoc to file scenarios but i don't know this one.
please help me friends, Thanks in advance.
Regards
Shalini Shah

Hi Shalini,
To trigger IDoc these configurations should be done in the SAP 4.6, XI and ECC 6.0.
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3 (4.6 and ECC 6.0)
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Also go ther the Blog <a href="/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi Configuration for Pushing IDOC's from SAP to XI</a> By Swaroopa Vishwanath
U need to import the IDoc types both inbound and outbound to XI.
1. Create Inbound and Outbound Message interface.
2. Do one to one message mapping.
3. Define an Interface mapping.
ID:
1. Create 1 Sender aggrement.
2. Create 1 Receiver aggrement.
3. Define 1 RD and ID.
4. Only create an receiver IDoc CC.
Regards
San
<a href="Remember to set the thread to solved when you have received a solution to set the thread to solved when you have received a solution</a>
Where There is a <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/weblogs?blog=/weblogs/topic/16">blog</a> there is a Way.

How to load data from SAP MDM to SAP BI/BW

Hi Guys,
I want to load master data from SAP MDM to SAP BI and would appreciate if some could provide me the step by step guide do the same. I found one of the document which talks about using generic DataSource "0MDM_Generic" but i dont find this datasource in BI content in my SAP BI 7.0 System.
Please let me know if some has already worked on this scenario and have any document.
Thanks,
Amit

Hi,
Pls chk this links;
MDM-BI Integration part 1 -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b03b4c55-e63d-2b10-e2a2-f8310c8e795f
MDM-BI Integration part 2 -
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0a6985b-fbbd-2b10-76a5-de0ed43f1a96
MDM-BI Integration part 3 -
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f08b9892-fbbd-2b10-4093-b2c21dfb90a7
Regards,
CSM Reddy

Data (Master Data Changes and Transaction Data) from SAP BW to SAP BPC 5.1

Hi guys
I have seen posts on this forum describing data transfers from SAP R/3 to SAP BPC. I assume the procedure for data transfers from SAP BW to SAP BPC 5.1 should be the same i.e. using SSIS packages.
However I have some unique requirements -
1. DATA AT DIFFERENT AGGREGATED LEVELS - I need data from SAP BW at different levels - Some data comes at Product level while other at Customer level and some at Project Level. The current procedure takes BW queries output in excel sheets (6 files) and then use the data manager package to load the data in SAP BPC 5.1 using appropriate transformation and conversion files. This procedure is highly manual and I am looking at using SSIS package to do this. However, because of having data at different levels, it becomes a little tricky. How can we achieve this using SSIS?
2. UPDATING MASTER DATA - I need to update the master data (dimension members) in SAP BPC 5.1 at the start of every month. The current procedure compares (in MS ACCESS) the data from the queries mentioned in 1 to the dimension members in SAP BPC 5.1 and spits a file with the new entries which needs to be manually updated in the appropriate dimensions using Admin Console. I am looking at automating this task. I cannot just replace all the contents of a dimension with the members coming from SAP BW since the dimension members contains some dummy members which are used for planning.
3. HIERARCHY CHANGES - What is the best way to capture the hierarchy changes in SAP BW into SAP BPC 5.1?
Please advise.
Thanks,
Ameya Kulkarni

Hi Ameya,
how did you solve the described problems? Can you give some hints about uploading master data and updating the hierarchy?
BR, André

How to upload the master data from legacy to SAP

Hi Frends,
how to upload the master data from legacy system to SAP System once the configuration is over.how to carry forward the open items of vendors and customers while uploading.who will upload functional consultantsor ABAPER.
please clarify me
Regards
Sap Guru

Hi ,
use LSMW or BDC for uploading Master & transaction data.
This work is done by the Respective Functional team.
Chandra

Synchonize cusotmer master data from SAP R/3 to CRM

Similar Messages

Maybe you are looking for