Synchronis​ation between Desktop Manager and Torch9800

Hi Guys,
When I perform a synch between my BlachBerry Desktop Manager software and my mobile device I lose data in the Microsoft Outlook note fields held on the desktop.
It appears that some of my contact note fields on my Torch device are locked to restrict the amount of data held, so as I increase my notes in Outlook on my desktop and then synchronise at the end of the day, I lose data at the botton of the Outlook notes field.
Fortunately, I always add the latest notes to the top of the notes field, so my most recent notes are saved but much of my history is deleted.
I would appreciate somebody contacting me, if they have experienced a similar problem and found a fix.
Is there a setting in the device which allows me to increase the Outlook field data space?
Many thanks,
Brian Williams.

Hi and Welcome to the Community!
It sounds like you are running up against this limitation:
KB13255 Notes field for the BlackBerry smartphone Address Book is truncated
It is a limitation...there is nothing you can adjust on your BB to increase the size of that field.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Initial sync between Desktop Manager and 8320 does not recognize internet connection

    Am unable to do an initial sync between Desktop Manager and BB Curve 8320.  Am getting error The computer must be connected to the Internet in order to initially configure synchronization settings. Please ensure that you are able to connect to the Internet and try again.  Tried with version 4.3 and 4.6.0.12.  I have a broadband connection that is always on and have also tried wirelessly.  Any suggestions are appreciated.

    Hi,
    First we need to do a clean install of the DM you have on, this will clean up the other installation as well,
    http://www.blackberry.com/btsc/search.do?cmd=displ​ayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub​...
    After you are down download DM 4.5 with NO MEDIA MANAGER from here:
    https://www.blackberry.com/Downloads/entry.do?code​=A8BAA56554F96369AB93E4F3BB068C22
    Just for trouble shooting purpose, turn off firewall and virus checkers,
    Bring DM, go through the setup wizards, connect your BB and do a BACKUP first
    Let me know how it goes!
    Thanks
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Difference between remote management and vnc

    Difference between remote management and vnc

    By VNC I will presume you mean 'Screen Sharing'.
    Screen Sharing in System Preferences - Sharing is purely for remote control and is based on the VNC protocol with a few extra features added by Apple.
    Remote Management in System Preferences does everything Screen Sharing does and is fully compatible with another Mac doing just Screen Sharing, i.e. it allows remote control. However it can also do additional things. It is intended for use with Apple's Remote Desktop Administration software which can use this to send files to a Mac, send (Unix) commands to a Mac and ask for a report from the Mac (e.g. how much RAM it has).
    If you don't have Apple Remote Desktop there is no real point enabling Remote Management instead of Screen Sharing.
    Both Screen Sharing and Remote Management can also be configured to allow 100% standard VNC connectivity from say a PC, as standard they only accept connections from Macs.

  • Desktop manager and Desktop Software

    Is there a differnce bewteen desktop manager and desktop software?  I'm trying to find  a link to download desktop manager.  I was told by t-mobile tech support to run application loader and I need desktop manager in order to run that application.  The reason why i need to run the application is that my firewall setting is enable with the 'lock' icon and it's preventing me from running applications that need to connect to the internet.  I was told that running application loader would remove the lock icon so I can disable the firewall setting.
    Thank you,
    New BB user.  

    OK...so those instructions are...well...dated...they indeed are for the full Desktop Software. Basically they have advised you to update your BB OS to the latest version in the hopes that the lock on the firewall will be removed. They did discuss the backup, but I actually prefer to take a manual backup first, then let the automatic one go, but I still have that manual one just in case.
    I can't see what any of those jpg's are, so I'm not sure exactly what they are saying.
    Anyway, there are other possible causes, but it's not necessarily wrong to follow those steps...it's just that they may or may not work...and before you ask, it's impossible to tell you, at an internet distance, anything at 100%.
    If you prefer, here's a different method to update your OS:
    From a PC, you can install any OS package to a BB via this procedure:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. You can even use a different carriers OS package by simply inserting, between steps 1 and 2, the deletion, on your PC, of a file named VENDOR.XML. Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure. You will also first want a clean and complete list of all of your add-on apps, including the source of them and activation keys.
    If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
    KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Lost connection between ovm-manager and ovm-server (ovm 3.1)

    Hi,
    I have a manager as a VM on my laptop and a physical server as an ovm-server. Everything is fine when i boot the server but after some time, the manager stop to show the information from the server. in the ovs-agent log file the following messages are repeated regulary
    [2013-08-29 13:06:19 6160] DEBUG (notification:289) Trying to connect to manager.
    [2013-08-29 13:06:20 6160] DEBUG (notification:291) Connected to manager.
    [2013-08-29 13:06:20 6160] ERROR (notification:316) No manager Core API server object for 10:60:4b:88:bc:24:10:60:4b:88:bc:25:fe:ff:ff:ff.
    [2013-08-29 13:06:34 6171] ERROR (notification:64) Unable to send notification: (111, 'Connection refused')
    I did not reboot neither the server nor the manager. No IP change. Rebooting the manager has no effect.
    The only way to restore communication is to restart the ovs-agent on the server, but this restart disable the network card. I must be physical on the server to restart the network.
    any help will be very helpful
    best regards
    Jean-Marc

    Hi,
    The are many steps to verify:
    Verify with your firewall on the Oracle VM Manager system (service iptables stop).
    Verify with a ping between OVM Manager and OVM Server using the IP Address and using the hostname for each one (from OVM Manager : ping ovm-server ; and from OVM Server: ping ovm-manager).
    I hope this can help you
    Best Regards

  • The Question about stock transfer between HU-Management and WM-Management

    Hi,
    There is a scenario about stock transfer between HU-Management and WM-Management storage location. I use transaction MB1B , movement type 313 , 315. After Good issue from WM-management storage location, outbound delivery will genarated, then Pack, Create/Confirm TO, at last post goods issue for the outboud delivery. But when i do movement type 315, there is a warning message "Data of preceding document was not transmitted", and from the F1 help i find this system reponse "You can maintain an indicator that makes information about preceding documents in this delivery available under delivery type in Customizing. For some characteristics of this indicator, the type of preceding document and the related document and item numbers must be transmitted to delivery creation. At least one of these parameters is missing.".
    So, My questions are:
    1. Generallily, Outbound delivery is created by SO, inbound delivery is created referenc PO, but how the stock transfer for 2 steps generate the outbould delivery and inbound delivery? Could you pls tell me the where i can config this in the IMG?
    2. What's "Data of preceding document was not transmitted" mean ? how to fix this issue ?
    Best Regards
    Boxer Du
    I am the SAP fans, focus on MM and WM. I am interesting TRM Yard Management and Cross Docking now.Very Gladly to talk you about these areas. I want to exchange the knowledge with you, and want to be a good friend of you. Pls contact me. You can find My MSN in the profile. Thanks.

    Hi,
    Sure, The inbound delivery type is set up in the IMG->Logistics General -> HU management -> Basics ->Delivery type -> Delivery type determination.
    For Inbound delivery type 'HID' is maintained in this view.
    Best Regards.
    Some One want to discuss the details , can contact me. Thanks.

  • Desktop Manager and Content Protection

    Hi,
    We've enabled content protection across all our devices via an IT policy. We are noticing that now, when some users try to connect to their devices via the desktop manager, the manager hangs.
    Is this just a coincidence or is there problems connecting to devices with content protection enabled?

    I'm glad I found this thread.
    I loaded the Desktop Manager and Roxio Media Manager 2 days ago. It completely crippled my laptop (running Vista, 4GB RAM etc), which previously ran very well.
    I suspected it was Roxio when I watched it take 20 minutes to install.
    Worringly, my laptop was crippled without the Desktop or Roxio software being used. The response rate was once every 5 minutes, and when eventually getting to the Task Manager and looking at the Processes and Applications (a 15 minute job!), there was nothing untoward.
    Having uninstalled them and rebooted, the laptop is back to its former glory so quite what Roxio was doing in the background, I have no idea. I won't be touching it again.
    Matt
    Message Edited by mjsulliva on 04-03-2009 05:13 AM

  • Difference between Time Management and Time Evaluation

    Hello
    Is there any Difference between Time Management and Time Evaluation? if yes, then what is it? I guess there's no diff, time evaluation is a report..
    please advice
    Thanks

    Hi Charlene,
    Time management can be divided into 3 steps
    1.Time Recording
    2.Time Evaluation
    3. Planning
    Time Evaluation :
    The recorded time data is grouped and converted to wage types which can be used by payroll for compensation.SAP provides a time evaluation program RPTIME00 for this purpose.
    Standard schemas TM00 and TM04 are used for evaluation of time data got from positive and negative time recording approaches.
    time evaluation program RPTIME00 also calculates accrual and entitlement for employees.
    Regards,
    Swapnil

  • Desktop manager and windows 8

    I have attempted to get desktop manager to work with windows 8 for months.  I have ensured that I have followed various instructions including enabling .net 3.5 without success.  I install the desktop manager and my computer recognises the playbook when I plug it into a usb, however, the blackberry software does not  connect to the playbook.  Have tried turning off avast antivirus without success.
    Can anyone helpl with an alternative, please?
    It works with my MAC computer but not with my windows laptop!
    alun.
    Thanks

    I have the exact same situation, and to make it worse I can't even get the desktop manager installed, let alone work.  I keep getting error message #1723.  It's hard to know whether it's a Windows problem or a Blackberry problem, although if it works on your Mac I guess it's a Windows problem.  I bought a new laptop and am having trouble with a lot of incompatibility problems with Windows 8.1.  I'll have to revert to my old Windows 7 laptop unless someone comes up with an answer.  Hopefully someone in the Community has one [fingers crossed]. 

  • Desktop Manager and Roxio Media Manager Soooo Slow

    Desktop Manager and Roxio Media Manager are so slow. Why? Just getting them to open takes five minutes or more.

    I'm glad I found this thread.
    I loaded the Desktop Manager and Roxio Media Manager 2 days ago. It completely crippled my laptop (running Vista, 4GB RAM etc), which previously ran very well.
    I suspected it was Roxio when I watched it take 20 minutes to install.
    Worringly, my laptop was crippled without the Desktop or Roxio software being used. The response rate was once every 5 minutes, and when eventually getting to the Task Manager and looking at the Processes and Applications (a 15 minute job!), there was nothing untoward.
    Having uninstalled them and rebooted, the laptop is back to its former glory so quite what Roxio was doing in the background, I have no idea. I won't be touching it again.
    Matt
    Message Edited by mjsulliva on 04-03-2009 05:13 AM

  • Connection Establishment between Solution Manager and BW

    Hi,
    Could you pl let me know the steps to follow for establishing the connection between Solution Manager and BI 7 system?
    Thanks & Regards,
    Vijaya

    Thanks!

  • Confused between knowledge management and knowledge warehouse

    Dear all,
    I'm confused on knowledge management in EP and knowledge warehouse.
    What is the difference between them?
    After reading several documents, I still don't understand...
    Could anybody help me about the concept, please?
    Thanks
    Regards

    Hi,
    See this link
    /thread/175875 [original link is broken]
    What is the difference between Knowledge Management and Knowledge Warehouse?
    Senthil K.

  • Downloaded blackberry desktop manager and won't run --er...

    downloaded blackberry desktop manager and won't run --error says this program can't run in dos mode

    Hi and welcome to the forums!
    Correct.  DM is a windows program. Do you get any error message? 
    Info please:
    BB OS - go to options-about; 3rd line down will read v4.x.x.xxx
    PC OS - xp, vista 32 or 64 bit
    DM version - lower left corner of home screen (or which version did you download?)
    Outlook version - 2003, 2007 etc
    Let us know.
    Message Edited by IrwinII on 08-05-2009 09:04 PM
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • Integration between Soluiotn Manager and HP Quality Center

    Hi Folks,
    I am currently configuring the integration between Solution Manager and HP Quality Center, and during the set up of communication user, I get the following error:
    User hpqc_comm is not authorized to access projects
    Message no. QC_INTEGRATION016
    Diagnosis
    You want to access projects in the Quality Center with the communication user hpqc_comm. This causes an error because the user either does not exist in the Quality Center or is not assigned to any project.
    Procedure
    Check whether the user hpqc_comm is in the Quality Center, and whether it is assigned to at least one project. Ask the Quality Center administrator to create the user and assign it to projects, if necessary.
    You can use another user for the communication
    Well, I have created that user in HPQC and assigned it to projects.
    Thanks for your help
    Marco

    the error is in Solution Manager. I am defining the communication parameters in SOLAR_PROJECT_ADMIN / <selected project> / edit / Connection to HP Quality Center. I choose the corresponding project in Quality Center, but when I validate the screen, I get the error I mentioned before, even though the communication user exists in HPQC and is assigned to that specific project.
    Thanks for your reply.
    Marco

  • Integration between case management and C-folder

    Dear Experts ,
    Can you help regarding integration between Case Managment and C-folder ???
    Kind Regards

    Hi,
    Simple answer: There is no specific integration existing.
    Case Management is using DMS as one option to save documents like Word, Excel.
    The cFolders solution is normally on a separate server and DMS documents can be checked out from the content server to cFolders and vice versa in SAP standard.
    I have experience from both solutions and I really don't see how these two solutions should be linked to each other from a business perspective.
    Regards, Johan

Maybe you are looking for