Synchronisation problem between Curve 9300 and Outlook

I have a Curve 9300 on 6.0 that synchronize with Outlook 2007.
Everything worked fine until last week (or so) when my Calendar entries on the BB don't synchronize anymore with Outlook. The Outlook Calender entries still synchronise on the BB. Everything else synchronise perfectly.
Since this is a new problem, I assume that something has changed either on the BB or on Outlook that makes this feature stop working. This is making my life complicated. Has anyone experienced a similar problem, and has found a solution?
Any help is appreciated.
Thanks,

Hi and Welcome to the Community!
I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Sync Problems between Blackberry 8330 and Outlook 2007 using Desktop software v 4.7

I have a Blackberry Curve 8330 and I have been experiencing some problems syncing it with my HP Notebook running Outlook 2007. I am using the most current Desktop Software version 4.7. I am using the BB Internet Service and all of my email accounts seem to be operating well. When I attempt to sync I receive the following errors in this sequence
Error 1: Intellisync; There are no applications configured for synchronization. From the synchronize screen, go to Configure > Synchronization to configure the applications.
At this point, I attempt to follow the above instructions and configure the applications I want to Sync. When I complete the above step for all applications, or each one seperately, I receive the following error:
Error 2: Runtime Error; Folder is no longer a part of the system data source or the folder can not be found.
As I stated above, I receive the error for all 4 applications (Address Book, Calendar, Memos and Tasks) whether they are configured seperately or all at once. I have unistalled the desktop software v4.7 5 times and Outlook 3 times. I am truly at a loss and in dire need of my Calendar and Contacts on my phone. If anyone has come across this in the past or has any ideas, Please feel free to comment or reply. Any info will be greatly appreciated!!!
BB: 8330 Curve
DS: Desktop Software v 4.7
PC: HP TX2500Z Notebook/Tablet
OS: Windows Vista Ultimate 64-Bit
DO: Microsoft Office Outlook 2007
Thanks,
Brian

uninstall the desktop manager, and install "4.7 without Media Manager"
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Sync between Curve 9300 and Win 7 Contacts

I have this situation: in my BB there are 438 contacs and in Win 7 LIve Contacts there are 531 contacts.
If I change and/or insert new contact in BB the sync updated the Win 7 Contacts, but it is impossible to add the 93 contacts present in Win 7 to the BB.
How can I solve this problem?
Thanks in advance

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Synchronisation problems between apple mail client on a MacBook Pro and Gmail

I am having synchronisation problems between apple mail client and gmail on the MacBook Pro, but no similar problems on the ipad and iphone. My mail is not being collected by the aplle mail client on the laptop, and now all my inbox for my gmail account has disappeared, although the Archive and sub folders under "Google" are still showing.
This is an intermittent problem.
I have previousy re-built the mailbox and solved the problem, but there must be something more fundamental going on, as the problem has occurred again.
Anyone have any tips?

Sorry, but no. POP3 versus IMAP has nothing to do with keeping spam off your computer. Your ISP should be doing its filtering before the mail reached the mail server in either case, and your Mac would be doing its filtering after downloading the mail from the mail server in either case. (Your iPad does no filtering at all.)

Externalizable problems between v1.3 and v1.4

Hej you.
I have strange problems with the Externalizable objects.
I Use many Object to Save my file, but wien i try to Externalizable on J1.3 and Denalizable again in J1.4 I got this message:
E:\Programmer\Java\ProrgamName>Java ProrgamName
javax.swing.JInternalFrame; Local class not compatible: stream classdesc serialV
ersionUID=8792953236056021037 local class serialVersionUID=-6387351733537024688
Can i trap J1.4 ID to use 1.3 ID, so it can use on ALL platforms, not just locally?
When I Save and load on the same machine it works fine, but not when i moving to another machine with 1.4. Is a another method, or i Need to save all object to AscII instead in this smart method (that are poorly work)? I have surfed around javasoft.com with finding a answear.
See my early quenstien on (closed):
http://forum.java.sun.com/thread.jsp?forum=31&thread=273990
With very regaards By:
Super Bomba, Denmark
PS. No Duke Dollars this time. Sorry.

Hey.
I found how to work around combatible problems between 1.3 and 1.4. For user, that want to save thier DynamicTree.java (http://java.sun.com/docs/books/tutorial/uiswing/components/example-swing/index.html)
Use follow code (I using Externalizable):
protected DefaultMutableTreeNode rootNode=null;
protected DefaultTreeModel treeModel=null;
public void writeExternal(ObjectOutput stream) throws IOException
{ stream.writeUTF(rootNode.toString());
    Vector values = new Vector();
    Object root = treeModel.getRoot();
    // Save the root, if its Serializable.
    if(root != null && root instanceof Serializable)
    { values.addElement("root");
      values.addElement(root);
    stream.writeObject(values);
public void readExternal(ObjectInput stream) throws IOException
{ thisModel.removeAll();
    thisModel.setVisible(false);
    try
    { String title=stream.readUTF();
      rootNode = new DefaultMutableTreeNode(title);
      Vector values = (Vector)stream.readObject();
      int indexCounter = 0;
      int maxCounter = values.size();
      treeModel = new DefaultTreeModel(rootNode);
      if(indexCounter < maxCounter && values.elementAt(indexCounter).equals("root"))
      { TreeNode root = (TreeNode)values.elementAt(++indexCounter);
        treeModel = new DefaultTreeModel(root);
        indexCounter++;
      // kode for setting the tree start here
    catch (ClassNotFoundException e) {}
}Hope, this is to use :-)
Hi from
Super Bomba

How does one do a two way contacts sync between an iphone and outlook? Most of the community has answered as this to be "always so", but it does not work! Changes made on outlook get done in my iPhone, but it does not work the other way around!

How does one do a two way contacts sync between an iphone and outlook? Most of the community has answered as this to be "always so", but it does not work! Changes made on outlook get done in my iPhone, but it does not work the other way around!

Close the tab the web page is loaded in (command - W).

Email set up on Curve 9300 and Music

I have just bought my daughter a used Curve 9300 and am having trouble setting up email account. In the set up menu the only option for email takes me straight to the Enterprise option - I think I need personal email set up but I do not know where to find it.
Also have a music download issue. I have synced it to our itunes and although I spent ages specify which tracks to add (using BB desktop software) and it seems to have added the whole libary! I then tried to remove it all with no success. Now seem to have double copies of everything! How do I remove all the music and start again and get it right.
Can you tell I am an iphone user, this BB stuff is all new to me!!

Hi and Welcome to the Community!
Nickkyfenton wrote:
I have just bought my daughter a used Curve 9300 and am having trouble setting up email account. In the set up menu the only option for email takes me straight to the Enterprise option - I think I need personal email set up but I do not know where to find it.
To use the proprietary RIM Push email capability, you must have an adequate data plan from your carrier. The carriers host BIS (BlackBerry Internet Service) for their BB users. Typically, BIS is not available via generic data plans. Many carriers call what is necessary The Blackberry Data Plan. Whatever they call it, it is the carrier who delivers BIS to their BB users -- contact them for assistance. Once you have a BIS-capable data plan on your BB (at whatever fees your carrier will charge, btw), you will should have Personal Email added to the email setup wizard.
http://www.blackberryfaq.com/index.php/What_do_I_need_a_Data_Plan_for%3F
Nickkyfenton wrote:
Also have a music download issue. I have synced it to our itunes and although I spent ages specify which tracks to add (using BB desktop software) and it seems to have added the whole libary! I then tried to remove it all with no success. Now seem to have double copies of everything! How do I remove all the music and start again and get it right.
Activate Mass Storage Mode and manage the music that way. From your PC, you will be able to treat the BB as a USB drive, with all of the capabilities of file management via PC. You can find out how to activate Mass Storage Mode in your device user guide:
http://docs.blackberry.com/en/smartphone_users/?userType=1
But...
Nickkyfenton wrote:
I have just bought my daughter a used Curve 9300
This actually concerns me the most. See this:
KB05099 Steps to take before selling or after buying a previously owned BlackBerry smartphone
If the seller did not properly complete all of their steps, then you have little hope of succeeding at anything with this BB. Further, if the device is not unlocked, then it can only be used on it's original carrier. Further still, if the device model is not specifically supported by the mobile network provider you wish to use, then you will have even further challenges getting it to work, with no guarantee of any success whatsoever.
BB's and i-devices are very very different.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Connection Problems Between iChat 3 and iChat 4 Workaround

Maybe this info will help others:
iChat 4/Leopard users must initiate video chat to iChat 3/Tiger users:
I have discovered that if an iChat 4/Leopard user initiates the video chat to an iChat3/Tiger user, it works, but if the iChat3/Tiger user initiates the video chat with an iChat 4/Leopard user it fails with a message saying that the receiver declined the invitation (even if the receiver tried to accept). This happens on a LAN as well as across the Internet.
Likewise, to make conference video chats, make sure the iChat 4/Leopard user initiates, then adds the other parties.
This post is NOT about iChat Server, although the problem occurs there too. If you are using iChat Server (part of OSX Server) see http://discussions.apple.com/thread.jspa?messageID=5995966 ).
Hope this helps.
ppj

Hey.
I found how to work around combatible problems between 1.3 and 1.4. For user, that want to save thier DynamicTree.java (http://java.sun.com/docs/books/tutorial/uiswing/components/example-swing/index.html)
Use follow code (I using Externalizable):
protected DefaultMutableTreeNode rootNode=null;
protected DefaultTreeModel treeModel=null;
public void writeExternal(ObjectOutput stream) throws IOException
{ stream.writeUTF(rootNode.toString());
    Vector values = new Vector();
    Object root = treeModel.getRoot();
    // Save the root, if its Serializable.
    if(root != null && root instanceof Serializable)
    { values.addElement("root");
      values.addElement(root);
    stream.writeObject(values);
public void readExternal(ObjectInput stream) throws IOException
{ thisModel.removeAll();
    thisModel.setVisible(false);
    try
    { String title=stream.readUTF();
      rootNode = new DefaultMutableTreeNode(title);
      Vector values = (Vector)stream.readObject();
      int indexCounter = 0;
      int maxCounter = values.size();
      treeModel = new DefaultTreeModel(rootNode);
      if(indexCounter < maxCounter && values.elementAt(indexCounter).equals("root"))
      { TreeNode root = (TreeNode)values.elementAt(++indexCounter);
        treeModel = new DefaultTreeModel(root);
        indexCounter++;
      // kode for setting the tree start here
    catch (ClassNotFoundException e) {}
}Hope, this is to use :-)
Hi from
Super Bomba

IChat - compatibility problems between v2.1 and v3.1

Hi,
I now have the new iMac Intel with iChat 3.1. I am trying to use it with a friend who has OS 10.3.9 with iChat 2.1.
I can see and hear him, but he can only hear me.
Is there a compatiliby problems between v2.1 and v.3.1 or it is just a configu problems?
Thanks a lot for any information
Bruno

Most likely cause is that you haven't updated the ProApplication Support file. Check here:
http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html

Synchronisation between IPHONE 3GS and Outlook-calender doesn't work

I have Problems with the synchronisation IPHONE 3GS and Outlook-calender

hi guicheft have you tried to do a hrad reset on your fone ? & have you deleted from your itunes at all ? if that still does'nt work you could try taking the sim out then put it back & see if that works. gud luck .lori

Hotsync problem with Windows 7 and Outlook 2007

Hello,
I try to make contact between my Palm Tungsten E2 and outlook 2007 on my laptop with Windows 7 for synchronizing.Before this, I worked on this laptop with Windows Vista and also Outlook 2007.I installed the standard software and after that the update for outlook 2007 (palmoutlook2007conduits.zip (7.2MB)).In Vista this was working well, but not in Windows 7.I can see in the soft ware part that palmoutlook2007conduits is installed, but the in the log book I still have the same errors :
- Not Synchronized
Outlook Contacts synchronization failed
When I go to the settings, also there is the same error : “This version of Outlook is not supported by the Outlook Conduit application. Supported outlook versions are Outlook 98, 200, XP(2002) and 2003.”. It looks like the upgrade with palmoutlook2007conduits have no effect in Windows 7.
I hope someone have a solutions for this problem.
Post relates to: Tungsten E2
Post relates to: Tungsten E2

My new computer came with Windows 7 64-bit, and I need to HotSync my Tungsten E2 with Outlook 2007. Did anyone find a way to do this?

TrackPad problem for curve 9300

Dears, I have bought a new BB curve 9300 more than a month ago from UAE and i am having a problem with the trackpad the sometimes it needs several touches to direct me up, down left or right , i tried the sensitivity from the BB SW but it has nothing to do , I noticed that the trackpad is raised a millimeter from the screen service level please advise how to resolve this problem Br Mina

Could do with knowing if moisture may be an issue. If it is or could be you must take out the battery, Sim and MC and leave it to dry out in a warm place for a couple of days if it got moist or 5 days if wet.
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

Trouble establishing conduit between Zire 72 and Outlook 2007.

I'm running Version 4.1.4, but can't seem to establish the conduit between Palm and Outlook 2007. My last HotSync had an error message stating Outlook 2007 is not supported. I spent some time on the phone with Palm, they said to go to http://kbpalm.com and enter Solution Code 8716. When I did this, I received an error message saying the item does not exist. The agent said she was unable to help.
Is there another way to establish the conduit?
Post relates to: Zire 72
This question was solved.
View Solution.

You will need to clean uninstall Palm desktop and re-install.
If you have the data in Palm desktop, export the data, uninstall Palm desktop, re-install, import the data, change the conduits to desktop overwrites handheld and then sync. once the sync is complete to palm desktop, install the oputlook 2007 conduits and then sync again.
If the data is in Outlook, follow the directions above.
Here is the procedure for exporting your data.
The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
Here are the clean uninstall instructions for XP;
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to C:\Program Files\Palm or
Palm One. Highlight your Palm Desktop username and right click and copy.
Then go to your PC desktop, right click on a blank spot and select paste.
If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
For Palm desktop 6.2, look in the following location for the folders and files, my documents, PalmOS desktop. You will find the username folder in this location.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer. Like the above folder, delete the Palm folder. Once this is done, you will need to delete some registry keys
from your PC Operating System registry.
Word of warning, going here and deleting the wrong thing can cause your PC
to not start up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This will show them everything
they need to delete. To retain your current Registry settings, we need to do a backup of the Registry.
On the PC, go to start and run type "regedit" without quotes
Highlight MY COMPUTER, go to File --> export. Should pop up with a Save As
box. Current location is fine should be in My Documents or you can change to a location you will remember. In the file name box, type "Regbackup[todaysdate]" i.e. Regbackup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are
you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer
Then reinstall your Palm desktop from the CD and do a hotsync. If it asks
you for a username, enter the name that is on your device in the upper right corner of the hotsync screen.
Here are the uninstall instructions for Vista;
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your Palm desktop from the CD and do a hotsync. If it asks
you for a username, enter the name that is on your device in the upper right corner of the hotsync screen.

TWO PROBLEMS:( BLACKBERRY CURVE 9300) 1) Unable to send/receive e-mails 2) black square with a minute hand whizzing round

Hello,
I have a BLACKBERRY CURVE 9300
i would be most grateful if someone could help me with persistent problems, which ive previously enlisted the help of T-mobile to resolve but to no avail.
1) I am unable to send/ receive e-mails, this has been an ongoing problem which seems to sort itself out for a short while then returns, i have been asked to remove e-mail accounts from device and re-boot, and as i say works for a short time then starts again.
2) I have this annoying black square in the middle of the screen with like a second hand whizzing round which can sometimes last ages. I was told by t-mobile this was due to not doing regular device updates, i have since done this and as i type continue to see this symbol.
Any advice/suggestions would be gratefully received.
Thankyou.
Andrew Goodall

The spinning clock is usually an indicator of low memory. Make sure you are completely closing apps your aren't using by using the close or exit option in the menu instead of just backing out of the app with the escape key. Also check your memory after you have rebooted your device. If it is still low then you may have to delete apps you absolutely don't need or use to get memory back.
As for the email issue I am assuming you have a data plan since you have tried to fix the problem with Tmobile. If you haven't done so you may have to re-register your phone on the network and or log into Tmobile's BIS site to resend your service books.

Problem between SOAP Sender and JDBC Receiver

Hi,
I have a asynchronous scenary between SOAP Sender and JDBC Receiver.
The idea is sending an ID for updating one register.
Table structure is:
TABLE AS_PERSONA
    (P_RUT                         VARCHAR2(10) NOT NULL,
    P_NOMBRE                       VARCHAR2(50),
    P_APELLIDO                     VARCHAR2(50))
The ID is the P_RUT field.
The structure of message that I send by SOAP, is the following:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <SOAP-ENV:Body>
          <m:MT_CONS_SOAP xmlns:m="urn:prueba:voliva">
               <CONSULTA>
                    <P_RUT>15445</P_RUT>
               </CONSULTA>
          </m:MT_CONS_SOAP>
     </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The JDBC receiver structure is:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_CONS_PERSONA xmlns:ns0="urn:prueba:voliva">
     <Statement>
          <AS_PERSONA action="UPDATE">
               <table>AS_PERSONA</table>
               <access>
                    <P_NOMBRE>DELETE_BY_XI</P_NOMBRE>
                    <P_APELLIDO>DELETE_BY_XI</P_APELLIDO>
               </access>
               <key>
                    <P_RUT>15445</P_RUT>
               </key>
          </AS_PERSONA>
     </Statement>
</ns0:MT_CONS_PERSONA>
When I do a call to SOAP by XMLspy, it returns a message without data, that means succesfull reply.
I see message monitor and see the succesfull flag. But in the database it doesn't update the register.
This scenario was proved using the File Sender and same JDBC Receiver, then result was succesfull.
I proved SOAP Sender with a File Receiver, storing information from SOAP sender in an archive, and works well.
Then I imagine that exist some problem between SOAP and JDBC. what could be happening ?
Thanks.

Hi,
Looks like the problem is with the JDBC receiver...try updating the value in the table by using a File-JDBC scenario..does it work..check the adapter monitor in RWB..
Regards,
Sushumna

Synchronisation problem between Curve 9300 and Outlook

Similar Messages

Maybe you are looking for