Synchronisation problem using rules (subfolder) at Outlook

Hello!
I have a synchronisation (subfolder) problem with my outlook account using the standard iOS-mail App. I have several rules to move emails from specific sender to subfolders. These rules were created directly @ Outlook.com.
There isn't any notice of new emails in the subfolder. So I need to open the subfolder to receive new mails.
Is it possible to synchronise the whole inbox folder (with subfolders) without open it manually?
Best regards
Chrsp

No ideas?

Similar Messages

E71 Calendar synchronisation problems using MFE

Hello All,
I have a E71 and I am experiencing problems using MFE. The connection to the server appears fine until calendar attempts to synchronise, at which point the log reports 'sync died (130)' Email and Contacts sync automatically
however if I attempt to add calendar to the sync schedule the connection just dies. I have included an extract of the report log:-
27/04/2009 2:51:02 cal: start = 2012-05-06T23:00:00(UTC) : May Day Bank Holiday
27/04/2009 2:51:02 client->server adds=0 changes=0 deletes=0 fails=0
27/04/2009 2:51:02 server->client adds=49 changes=0 deletes=0 fails=0
27/04/2009 2:51:15 cal: start = 2009-05-20T09:00:00(UTC) : ECS Steering Committee
27/04/2009 2:51:15 cal: start = 2009-06-04T08:00:00(UTC) : SummitSkills Board meeting
27/04/2009 2:51:15 sync died (130), collection=Calendar activity=handling commands from server
27/04/2009 2:55:42 PING Command Requested
27/04/2009 2:55:46 start Calendar sync
27/04/2009 2:55:59 Server wants to add an item that already exists. Process as Change.
27/04/2009 2:55:59 cal: start = 2009-05-20T09:00:00(UTC) : ECS Steering Committee
27/04/2009 2:55:59 cal: start = 2009-06-04T08:00:00(UTC) : SummitSkills Board meeting
27/04/2009 2:55:59 sync died (130), collection=Calendar activity=handling commands from server
I have installed the latest MFE 2.9.158 and rest the device a number of times, but I still have the same problem
For info syncing on an MS Push email (same account) appears fine.
Any help or advice will be greatly appreciated
Thanks
Shrimo

Have you checked in Settings>General>Date & Time to make sure 24 hr time is turned off?

Synchronisation problem between Curve 9300 and Outlook

I have a Curve 9300 on 6.0 that synchronize with Outlook 2007.
Everything worked fine until last week (or so) when my Calendar entries on the BB don't synchronize anymore with Outlook. The Outlook Calender entries still synchronise on the BB. Everything else synchronise perfectly.
Since this is a new problem, I assume that something has changed either on the BB or on Outlook that makes this feature stop working. This is making my life complicated. Has anyone experienced a similar problem, and has found a solution?
Any help is appreciated.
Thanks,

Hi and Welcome to the Community!
I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Syncronization problem using Office 365 with Outlook 2013

Hi
I have a problem with my Outlook 2013.
On my Office computer, I am using a Mac Computer and I have my gail account on it.
On my Laptop I have Windows 8.1 and Office 2013.
I have my POP account configured and I am able to send and receive e-mail, but when I delete an e-mail
on my Mac it won`t delete it on my Outlook 2013...
Any Ideas?
Thank you!
Moriyas

Hi Moriyas,
George is right. POP accounts do not allow Outlook to sync with the mail server. In this case, if you deleted a message from one of your devices, this update/change will not get sync'd to your mail server, hence all other devices with the same
account configured will have no chance to get the updates.
If it is possible (if your ISP support IMAP also), you might consider switching to IMAP configuration, which is the better choice for those who frequently use multiple devices to work with their email.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

I am unable to sync my Ipod touch with Outlook 2007, an operation I was able to do with no problem using Outlook 2002.

When I plug my ipod touch into my desktop computer to synchronise it, and in particular with Outlook 2007, I get the error message "Itunes was unable to load provider data from Sync Services". Reconnect or try again. All appropriate boxes have been ticked where possible, the callendar and contacts boxes being greyed out and ticking not possible. When using Outlook 2002 this box enabled sync to be carried out with Outlook without a problem. I have uninstalled both Outlook and Itunes and reset my Ipod Touch but get the same results no matter what I do. Apple claim that the Ipod touch is compatible with Outlook 2007 but it appears not to be the case. I am using the latest Ipod software of 4.2.1. Can anyone help me.

Tough spot if you want Apple only SW, no idea where you can get where you want without some decent 3rd party SW, which as a rule outshines Apple's SW by light years.

Problem with rules after migration

After migration of some mailboxes from Exchange 2007 to 2010 we have a problem managing rules. When trying to create or look at rules from OWA we get an Mapi error (See below). Also, When checking the problem user rules from Exchange Management
Console "get-inboxrule -mailbox <User>", it fails with a Doctor Watson error (also below) Witch is similar to the one from OWA.
Any help would be much appreciated.
Mapi Error:
MapiExceptionNotFound: Unable to query table rows. (hr=0x8004010f, ec=-2147221233) Diagnostic context: Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=104] Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=1366][latency=15] Lid: 23226 --- ROP Parse Start --- Lid: 27962 ROP: ropGetRulesTable [63] Lid: 27962 ROP: ropSetColumns [18] Lid: 27962 ROP: ropQueryRows [21] Lid: 31418 --- ROP Parse Done --- Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=53] Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=168][latency=0] Lid: 23226 --- ROP Parse Start --- Lid: 27962 ROP: ropLtidFromId [67] Lid: 17082 ROP Error: 0x8004010F Lid: 17505 Lid: 21921 StoreEc: 0x8004010F Lid: 27962 ROP: ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid: 26426 ROP: ropLtidFromId [67] Lid: 43747 dwParam: 0x5 Lid: 55653 StoreEc: 0x8004010F Lid: 1750 ---- Remote Context End ---- Lid: 26849 Lid: 21817 ROP Failure: 0x8004010F Lid: 30894 Lid: 24750 StoreEc: 0x8004010F Lid: 29358 Lid: 27950 StoreEc: 0x8004010F Lid: 32190 Lid: 21950 StoreEc: 0x8004010F Lid: 27070 Lid: 22974 StoreEc: 0x8004010F Lid: 18686 Lid: 1136 StoreEc: 0x8004010F Lid: 24318 Lid: 32510 StoreEc: 0x8004010F
Doctor Watson:
WARNING: An unexpected error has occurred and a Watson dump is being generated: MapiExceptionNotFound: Unable to query
table rows. (hr=0x8004010f, ec=-2147221233)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=104]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=1366][latency=15]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetRulesTable [63]
Lid: 27962 ROP: ropSetColumns [18]
Lid: 27962 ROP: ropQueryRows [21]
Lid: 31418 --- ROP Parse Done ---
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=53]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=168][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropLtidFromId [67]
Lid: 17082 ROP Error: 0x8004010F
Lid: 17505
Lid: 21921 StoreEc: 0x8004010F
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropLtidFromId [67]
Lid: 43747 dwParam: 0x5
Lid: 55653 StoreEc: 0x8004010F
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x8004010F
Lid: 30894
Lid: 24750 StoreEc: 0x8004010F
Lid: 29358
Lid: 27950 StoreEc: 0x8004010F
Lid: 32190
Lid: 21950 StoreEc: 0x8004010F
Lid: 27070
Lid: 22974 StoreEc: 0x8004010F
Lid: 18686
Lid: 1136 StoreEc: 0x8004010F
Lid: 24318
Lid: 32510 StoreEc: 0x8004010F
MapiExceptionNotFound: Unable to query table rows. (hr=0x8004010f, ec=-2147221233)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=104]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=1366][latency=15]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetRulesTable [63]
Lid: 27962 ROP: ropSetColumns [18]
Lid: 27962 ROP: ropQueryRows [21]
Lid: 31418 --- ROP Parse Done ---
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=53]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=168][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropLtidFromId [67]
Lid: 17082 ROP Error: 0x8004010F
Lid: 17505
Lid: 21921 StoreEc: 0x8004010F
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropLtidFromId [67]
Lid: 43747 dwParam: 0x5
Lid: 55653 StoreEc: 0x8004010F
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x8004010F
Lid: 30894
Lid: 24750 StoreEc: 0x8004010F
Lid: 29358
Lid: 27950 StoreEc: 0x8004010F
Lid: 32190
Lid: 21950 StoreEc: 0x8004010F
Lid: 27070
Lid: 22974 StoreEc: 0x8004010F
Lid: 18686
Lid: 1136 StoreEc: 0x8004010F
Lid: 24318
Lid: 32510 StoreEc: 0x8004010F
+ CategoryInfo : NotSpecified: (:) [Get-InboxRule], MapiExceptionNotFound
+ FullyQualifiedErrorId : Microsoft.Mapi.MapiExceptionNotFound,Microsoft.Exchange.Management.RecipientTasks.GetInb
oxRule
-FireLite

Hi,FireLite,
What kind of the migration?
If it was cross forest or involved PST files then rules rarely come across correctly and should be recreated.
If it was simply install Exchange 2010 and use move mailbox, then rules should have moved with the mailbox.And please provide more information like below:
1)Does this rule problem happen to all moved mailboxes or just part of them?
2)Would you please verify that you have successfully moved these problem mailbox?
3)Can you manage the rule in outlook for them?Have you tried to create a new rule to see if it works for these mailbox in OWA or Outlook?
Please try to move the mailbox back to Exchange 2007,then move it to another mailstore,after that migrate it again to Exchange 2010 to see if it works.
And here are some resolved cases with similar error for your reference.
http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/3c795b8f-0b60-4346-b8f1-eb8c4f9c9cb0
http://social.technet.microsoft.com/Forums/en/exchangesvradminlegacy/thread/3cf2360f-0a4c-4c7e-87c9-6726e3dc34fd
Regards,
Sharon
Sharon Shen
TechNet Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

Error in loading data into essbase while using Rule file through ODI

Hi Experts,
Refering my previous post Error while using Rule file in loading data into Essbase through ODI
I am facing problem while loading data into Essbase. I am able to load data into Essbase successfully. But when i used Rule file to add values to existing values I am getting error.
test is my Rule file.
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot put olap file object. Essbase Error(1053025): Object [test] already exists and is not locked by user [admin@Native Directory]
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C1_HSP_RATES "HSP_Rates",C2_ACCOUNT "Account",C3_PERIOD "Period",C4_YEAR "Year",C5_SCENARIO "Scenario",C6_VERSION "Version",C7_CURRENCY "Currency",C8_ENTITY "Entity",C9_VERTICAL "Vertical",C10_HORIZONTAL "Horizontal",C11_SALES_HIERARICHY "Sales Hierarchy",C12_DATA "Data" from PLANAPP."C$_0HexaApp_PLData" where (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
#stmt.setFetchSize(srcFetchSize)
stmt.setFetchSize(1)
print "executing query"
rs = stmt.executeQuery(sql)
print "done executing query"
#load the data
print "loading data"
stats = pWriter.loadData(rs)
print "done loading data"
#close the database result set, connection
rs.close()
stmt.close()
Please help me on this...
Thanks & Regards,
Chinnu

Hi Priya,
Thanks for giving reply. I already checked that no lock are available for rule file. I don't know what's the problem. It is working fine without the Rule file, but throwing error only when using rule file.
Please help on this.
Thanks,
Chinnu

Error while using Rule file in loading data into Essbase through ODI

Hi Experts,
I am facing problem while loading data into Essbase. I am able to load data into Essbase successfully. But when i used Rule fule to add values to existing values am getting error.
test is my Rule file.
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot put olap file object. Essbase Error(1053025): Object [test] already exists and is not locked by user [admin@Native Directory]
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
     at java.lang.Thread.run(Thread.java:662)
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C1_HSP_RATES "HSP_Rates",C2_ACCOUNT "Account",C3_PERIOD "Period",C4_YEAR "Year",C5_SCENARIO "Scenario",C6_VERSION "Version",C7_CURRENCY "Currency",C8_ENTITY "Entity",C9_VERTICAL "Vertical",C10_HORIZONTAL "Horizontal",C11_SALES_HIERARICHY "Sales Hierarchy",C12_DATA "Data" from PLANAPP."C$_0HexaApp_PLData" where      (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
#stmt.setFetchSize(srcFetchSize)
stmt.setFetchSize(1)
print "executing query"
rs = stmt.executeQuery(sql)
print "done executing query"
#load the data
print "loading data"
stats = pWriter.loadData(rs)
print "done loading data"
#close the database result set, connection
rs.close()
stmt.close()
Please help me on this...
Thanks & Regards,
Chinnu

Hi Priya,
Thanks for giving reply. I already checked that no lock are available for rule file. I don't know what's the problem. It is working fine without the Rule file, but throwing error only when using rule file.
Please help on this.
Thanks,
Chinnu

N-Queens Problem Using Stacks Help

I'm trying to solve the N-Queens problem using Stacks. Quite frankly, I'm completely lost.
Here's the pseudocode from the book:
"Push information onto the stack indicating the first choice is a queen in row 1, column 1.
success = false;
while(!success && !s.isEmpty())
Check whether the most recent choice (on top of the stack) is in the same row, same column, or same diagonal as any other choices (below the top). If so, we say there is a conflict: otherwise, there is no conflict.
if (there is a conflict)
-Pop items off the stack until the stack becomes empty or the top of the stack is a choice that is not in column n. If the stack is now not empty, then increase the column number of the top choice by 1.
else if (no conflict and the stack size is n)
-Set success to true because we have found a solution to the n-queens problem.
else
-Push information onto the stack indicating tat the next choice is to place a queen at row number s.size()+1 and column number 1.
And here is my excuse for code so far. I have no idea how to check the diagonals, or how to even really make this work
{code}import java.util.Stack;
public class NQueens {
int row, column, n;
public NQueens(int n) {
row = 0;
column = 0;
n = n;
public Stack Solve(){
boolean success, conflict;
Stack<NQueens> Qs = new Stack<NQueens>();
if (Qs.size() == 0)
Qs.push(new NQueens(1));
success = false;
while (!success && !Qs.isEmpty())
if (Qs.peek().row == row)
conflict = true;
if (Qs.peek().column == column)
conflict = true;
if (conflict = true)
Qs.pop();
Qs.peek().column += 1;
else
if (!conflict && Qs.size() == n)
success = true;
else
Qs.push(new NQueens(Qs.size()+1));
return Qs;
{code}

First off I'll address this:
    int row, column, n;
    public NQueens(int n) {
        row = 0;
        column = 0;
        n = n; //here
    }Notice the last line of that. I get what you're trying to do, but think about what the compiler sees there. If you have two variables called 'n', one at the class level, and one at the method level, the compiler must have rules so it knows which one you're talking about. And if it follows those rules, then saying 'n' inside that method must always refer to the same n. Otherwise, how would it decide which one you're talking about? The rule here is that it uses the most local variable available to it, which in this case is your method parameter. So 'n = n' is setting the parameter equal to itself. To refer to the class variable n, use "this.n", like so:
this.n = n;Now that that's settled, let's address some logic. You'll need to figure out whether two Queens share a diagonal. I can think of at least a couple options for that. First, every time you look at a Queen you could loop through the entire board and make sure that if a piece is in r3c4, that no piece is in r2c3,r4c5,r5c6, etc. Or you could create a new variable for your class similar to your 'row' and 'column' variables that tracks the diagonal a piece is in. But that requires some calculating. And remember, there's 2 directions for diagonals, so you'll need 2 diagonal variables.
If these are your Row and Column values:
Row          Column
00000000     01234567
11111111     01234567
22222222     01234567
33333333     01234567
44444444     01234567
55555555     01234567
66666666     01234567
77777777     01234567And these are your diagonal values:
Diag 1                    Diag 2
0 1 2 3 4 5 6 7          7 6 5 4 3 2 1 0
1 2 3 4 5 6 7 8          8 7 6 5 4 3 2 1
2 3 4 5 6 7 8 9          9 8 7 6 5 4 3 2
3 4 5 6 7 8 9 10          10 9 8 7 6 5 4 3
4 5 6 7 8 9 10 11          11 10 9 8 7 6 5 4
5 6 7 8 9 10 11 12          12 11 10 9 8 7 6 5
6 7 8 9 10 11 12 13          13 12 11 10 9 8 7 6
7 8 9 10 11 12 13 14          14 13 12 11 10 9 8 7Then examine the relationship between Row(R), Column(C), and Diagonals 1 and 2 (D1/D2):
RC   D1,D2
00 = 0,7
01 = 1,6
02 = 2,5
03 = 3,4
04 = 4,3
05 = 5,2
06 = 6,1
07 = 7,0
10 = 1,8
11 = 2,7
12 = 3,6
13 = 4,5
14 = 5,4
15 = 6,3
16 = 7,2
17 = 8,1You'll notice that D1 is always the same as R + C. And D2 is always the same as C subtracted from 7 plus R, giving:
int d1 = row + column;
int d2 = (7 + row) - column;But remember, that 7 in the formula above, is based on how big your grid is. So whatever your 'N' is, whether its a 10x10 square or a 574x574 square, that 7 should be changed to (N-1)
So those could be your variables to track diagonals. What I'm noticing in your current code, is that you never change your row and column variables...so every Queen is always at r0c0. You should probably put values for those in your parameters for the constructor, in addition to n. Then the diagonals can be calculated from those.
Edited by: newark on Apr 17, 2008 10:46 AM

Query regarding Metadata load in Essbase using rule file

Hi
In our application,we are loading metadata using Essbase rule file and here we are facing one problem.Suppose we have to load a level 0 member called "xxxx" under two different parent,assume the parent members are Parent_AAAA and Parent_BBBB.But our requirement is the consolidation operator for the first occurrence ( i.e under Parent_AAAA) is "+" and for the shared member under Parent_BBBB is "-".But,when we are loading using rule file the consolidation operator for the shared member always being loaded as "+".Is there any trick to change the consolidation operator for shared member other than changing it manually in outline?
Pls help....Thanks in advance.

I don't think there is a way to change the default setting.
However, what you can do is to have a different load rule and different text file with only the metadata that you want to have an exception for shared members. That way, you can achieve it as you do not have to change the existing rule file.
Regards
ORACLE | Essbase

New Context for 'Problems' in Rule modeler not working

Hi,
I am using the Rule modeler to determine the Service team based on selected Categorization schema for Incidents - it's working fine. Now I want to implement the same for Problems
I created a new Z Context (Master Request) to create a rule policy for Problems -> assigned rule policy to a ZServ.Mgr.Profile Unfortunately the rule policy is not working for problems. The new ZContext was copied from existing SERVICEREQUEST context which also copied all the services within.
Am I missing something ? Please help.
BR.
P.S incidents have an action definition with method DISPATCH that determines service team - same has been assigned to Problems.

Had to use 2 Dispatch methods to determine the service team.

Changing Rules Imported from Outlook to OWA

My company switched from basic Outlook in it's own servers, accessed from my PC, to cloud based OWA which I access from my iPad.
I had rules sending mail from my company and some contacts to a subfolder of my Inbox. I can still change this list in Outlook but can't access the list in OWA - can I change the contacts in the Rule on my iPad?
Tim

Hi Tim,
Do you mean that the Inbox rule created in Outlook can't be edit in OWA of your iPad? Is there any error description when you change the list in OWA?
Please try to login to OWA in Windows to check whether you can change the related rule. If the issue also happens in Windows, please create a new contact group for your needed list in OWA then create a new rule for it to have a try.
Thanks,
Winnie Liang
TechNet Community Support

I'm having problems receiving/sending emails thru Outlook.

I switched internet connection from AT&T to Comcast and I'm still utilized several AT&T email address's for free. I'm having problems receiving/sending emails thru Outlook. Could the problem be due to using their free emails with no support.
Do I have to go thru yahoo to read/send emails?

Change the ISP would not effect the email connection generally. (Only when ISP disable your mailbox which they could control directly.)
I suppose that your Outlook still store/cache the AT&T messages, try to export them as PST data file for backup.
Setup the new Yahoo in your current Outlook first and then import that backup.pst to continue to use.
http://support.microsoft.com/kb/287070/en-us
Thanks
Tony Chen
TechNet Community Support

C7 problem with OVI suite and Outlook exchange 200...

Hello,
I'm now own a NOKIA C7 and need to switch to OVI suite, PC suite is not supported for this handy. OVI suite is not synchronizing my contacts from exchange to my C7.
With my old N73 and PC suite I did not have the problem on my DELL M4400 notebook.
What I've found out, in case of using a USB cable connected nothing was able to synchronize,
no contacts, calendar and Notes. The OVI suite did nothing for 15 minutes, only searching for somewhat.
Crazy is, in case of using a Bluetooth connection (removed the USB connection), it was possible to synchronize the calendar and Notes, but contacts were still not possible, some issue as before.
We verified this problem, using a NOKIA N8 from a colleague - exactly same happened.
I was happy to have at least the calendar synchronized, because I need this for my job.
Nevertheless the contact synchronization issue need to be fixed...
I've bought the C7 with symbian, because I expected no problems in compare to other available Handy Companies and now this...
My personnel opinion, the OVI suite is currently not was the people expecting - support for consumer people and flexible for business people. For me PC suite was much more, what I need.
Now, I'm waiting for support to fix my problem...
Best regards,
Onecent59
Solved!
Go to Solution.

Hello Joyfeal,
Hello Joyfeal,
I never had problems with my old N73, using PC suite - this worked well over years.
Hello Joyfeal,
I never had problems with my old N73, using PC suite - this worked well over years.
I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
Hello Joyfeal,
I never had problems with my old N73, using PC suite - this worked well over years.
I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
Hello Joyfeal,
I never had problems with my old N73, using PC suite - this worked well over years.
I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
I've tried so much - no success. I've a lot experience in software - but no idea, what I can try out more. I guess, there must something be with Outlook 2007 and Exchange server usage, which worked with PC suite.
Hello Joyfeal,
I never had problems with my old N73, using PC suite - this worked well over years.
I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
I've tried so much - no success. I've a lot experience in software - but no idea, what I can try out more. I guess, there must something be with Outlook 2007 and Exchange server usage, which worked with PC suite.
I've talked with a few guys in my company (R&D area) and all told me, that they like the new N8 and C7-00, but they hate the OVI suite - it´s designed for kids and hobby user, but not for professional usage - my opinion is, that PC suite was much clear in use. OVI suite has some feature I like, but I expect to have such kind of problems fixed. The C7-00 is not a cheap handy, so I can expect this.
Hello Joyfeal,
I never had problems with my old N73, using PC suite - this worked well over years.
I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
I've tried so much - no success. I've a lot experience in software - but no idea, what I can try out more. I guess, there must something be with Outlook 2007 and Exchange server usage, which worked with PC suite.
I've talked with a few guys in my company (R&D area) and all told me, that they like the new N8 and C7-00, but they hate the OVI suite - it´s designed for kids and hobby user, but not for professional usage - my opinion is, that PC suite was much clear in use. OVI suite has some feature I like, but I expect to have such kind of problems fixed. The C7-00 is not a cheap handy, so I can expect this.
...now I wait for help or software update...
Hello Joyfeal,
I never had problems with my old N73, using PC suite - this worked well over years.
I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
I've tried so much - no success. I've a lot experience in software - but no idea, what I can try out more. I guess, there must something be with Outlook 2007 and Exchange server usage, which worked with PC suite.
I've talked with a few guys in my company (R&D area) and all told me, that they like the new N8 and C7-00, but they hate the OVI suite - it´s designed for kids and hobby user, but not for professional usage - my opinion is, that PC suite was much clear in use. OVI suite has some feature I like, but I expect to have such kind of problems fixed. The C7-00 is not a cheap handy, so I can expect this.
...now I wait for help or software update...
Regards,
OneCent59
Hello Joyfeal,
I never had problems with my old N73, using PC suite - this worked well over years.
I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
I've tried so much - no success. I've a lot experience in software - but no idea, what I can try out more. I guess, there must something be with Outlook 2007 and Exchange server usage, which worked with PC suite.
I've talked with a few guys in my company (R&D area) and all told me, that they like the new N8 and C7-00, but they hate the OVI suite - it´s designed for kids and hobby user, but not for professional usage - my opinion is, that PC suite was much clear in use. OVI suite has some feature I like, but I expect to have such kind of problems fixed. The C7-00 is not a cheap handy, so I can expect this.
...now I wait for help or software update...
Regards,
OneCent59
Hello Joyfeal,
I never had problems with my old N73, using PC suite - this worked well over years.
I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
I've tried so much - no success. I've a lot experience in software - but no idea, what I can try out more. I guess, there must something be with Outlook 2007 and Exchange server usage, which worked with PC suite.
I've talked with a few guys in my company (R&D area) and all told me, that they like the new N8 and C7-00, but they hate the OVI suite - it´s designed for kids and hobby user, but not for professional usage - my opinion is, that PC suite was much clear in use. OVI suite has some feature I like, but I expect to have such kind of problems fixed. The C7-00 is not a cheap handy, so I can expect this.
...now I wait for help or software update...
Regards,
OneCent59

Problems using memory card

Hi!
I bought few months ago memory card 4GB for my N95, for quite some time I'm having problems using it in terms of loosing data regularly. Though, I don't know if problem is in my phone or memory card I'm wondering is there any tool to check card or any other way to see what could be possibly wrong?
Solved!
Go to Solution.

I wouldn't say permanent damage, but it is a good rule to format the cards first of all as most of these cards purchased over the counter are made for several different machines, and formatting it in the phone sets the MMC up for phone use.
Its not essential, but i find it helps.
There is no tool to check the MMC that i am aware of, but try the phone for a day without the card to see if the problem still occurs.
If it does, you know its a phone fault or vice versa.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

Synchronisation problem using rules (subfolder) at Outlook

Similar Messages

Maybe you are looking for