Synchronisation problem with deleting an appointment from an iterating appointment

Hello,
I have a problem with the synchronisation of appointments from iCal (Mac OS X 10.7.3) to my iPhone 3GS (iOS 5.1) with iTunes (10.6.1 (7)).
Scenario:
I create an iterating appointment (e.g. each week) in iCal. Than I synchronise these appointments with my iPhone. After that I delete one specific appointment (not the whole iterating appointments) in iCal and synchronise the calendar via iTunes again.
Now the appointment I deleted in iCal still exists on my iPhone. If I choose the option "replace all appointments on my iPhone" in iTunes it doesn't work and the deleted appointment still exists in my iPhone calendar.
Any solutions for this problem? Or is it a known bug?

Hi,
try to make the request status into red in monitor and then delete. if the request deletion taking long time try to change the QM status in to green. i think then the delete box will dissaper. again start from begin convert the status to RED in monitor for that particular request. and then delete it.

Similar Messages

Problems with delete overlapping requests from InfoCube in PC

Hi guys,
Iu2019m using delete overlapping requests from InfoCube in Process Chains, but Iu2019m not being able to adjust it to my specific requirement.
For example:
I execute DTP to load InfoCube XPTO with Fiscal Year 2008 and 2009. After this I have to load again, but only for 2009.
In this specific example I want my process chain to delete the 2009 data from my first load, because it is overlapped, and leave 2008 data.
Is this possible? If yes how?
Thanks in advance
Jão Arvanas

It will not work that way.
It will look if the selections are same then it wil delete if not then it will not do that activity.
Overlapping settings which you might chosen is based on the delete overlapping for the same selections..
So in this case the selections are different and hence its not possible.
Thanks
Murali

Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

Thanks, for info, iPod Classic is a slower machine compared the Nano, unfortunately, if you read these discussions, majority of the freezes involved iTunes 10. Although if might be just slow and some impatient user just disconnect the iPod ands cause more problems. ( Yes I also did that but safely by doing a iPod Hard Reset, before disconnecting).
Here is the Apple support article that may help you.
http://support.apple.com/kb/TS1717
or my usual solution for Windows Users.
Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
My suggestion.
Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC, do not use any USB Hub.
When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
When Restore complete, eject the iPod and reconnect again.
Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
Good Luck!

After update 8.1.2 i had problem with sync my content from ITunes with IPod

After update 8.1.2 i had problem with sync my content from ITunes with IPod. It stucks on moment when its waiting for implementing changes (step 5 of 5) Hours and hours i'm waiting but still the same. So i cant use my Ipod at all. I restarted Ipod and delete and download Itunes again. Still stuck in the same moment. Help please. Someone has some problems like that?

I have an error message saying that "An unknown error occurred (-54)"

Problem with downloading individual songs from an already purchased album to iPhone

Hi All,
I'm having problems with downloading single songs from the "purchased" list onto my iPhone. I reset my phone and went to redownload my music, however i only want to download certain songs from different albums which in the past i've been able to do by navigating to the purchases section of the itunes app, then opening each album and selecting the cloud like icon by each song i want.
Having tried this today, i get the list of songs however the all have a "Purchased" next to them which is greyed out and the only way to download anything is to get the whole album. I've not got iTunes match on and can't think of any settings i've changed, can any suggest what i need to do to enable me to just get a selection of songs?

Actually Michael I know exactly how to delete.. The iPhone would not let me swipe to the left to delete the individual song, so I went to the album view and did it there.. The issue I am having is a bug because it removed 3/4 of the albums availablity off my iPhone.. You post proved no help because it is basic troubleshooting which, if you read my post, I have already done.. I did however figure out how to fix my issue on my own.. Basically I had to remove the album from my iTunes on my computer and upload it again to iTunes Match..

Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

- Go to Settings>General>Usage>Storage>and under apps select FBM and try to delete it.
Next:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.

I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.
At first I thought it might be because I was using simultaneously my old iPhone 4S so it somehow realized the emails where being pushed to another device and the it marked as read, this has nothing to do since I have deleted the email account from the iPhone 4S

Contact the email provider for assistance with their service.

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

Cisco ASA 5505 - problem with negotiating IP address from PPPoE

Hi all,
I have problem with negotiating IP address from PPPoE. There is following design: ISP providing vDSL ending on VDSL modem in bridge mode. Behind brigde modem is ASA 5505 terminting PPPoE on OUTSIDE. Everything works fine except negotiating IP address from PPPoE server.
I have configured ASA 5505 with (ASA Version 9.2(2)4) for PPPoE like this [1.]. But If i try to "show" IP address on OUTSIDE interface a get this [2.], ok strange but let's continue. If list "show vpdn pppinterface id 1" i get this [3.]. Seems that I got public IP addres what was right, but this IP address was not associated with interface OUTSIDE?
Well, if I set IP address manually like this [4.] and also set a default route everything works fine but what will happen when ISP change reservation for my IP address or default gateway.
I have tried different version of ASA OS like 8.4, 9.1 but without luck.
Can anybody help me. Thanks a lot.
Regards
Karel
[1.]
interface Vlan100
description >>VLAN pro pripojeni do internetu<<
nameif OUTSIDE
security-level 0
pppoe client vpdn group O2
ip address pppoe setroute
vpdn group O2 request dialout pppoe
vpdn group O2 localname O2
vpdn group O2 ppp authentication chap
vpdn username O2 password *****
interface Ethernet0/0
description >>uplink O2 vDSL<<
switchport access vlan 100
[2.]
ciscoasa(config-if)# show ip address vlan 100 pppoe
ciscoasa(config-if)# 0.0.0.0 255.255.255.255 on Interface: OUTSIDE
ciscoasa(config-if)# show interface vlan 100 detail
Interface Vlan2 "OUTSIDE", is up, line protocol is up
Hardware is EtherSVI, BW 100 Mbps, DLY 100 usec
        Description: >>VLAN pro pripojeni do internetu<<
        MAC address f44e.05d0.6c17, MTU 1492
        IP address unassigned
Traffic Statistics for "OUTSIDE":
        28 packets input, 1307 bytes
        31 packets output, 721 bytes
        0 packets dropped
      1 minute input rate 0 pkts/sec, 3 bytes/sec
      1 minute output rate 0 pkts/sec, 1 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Control Point Interface States:
        Interface number is 15
        Interface config status is active
        Interface state is active
[3.]
ciscoasa(config-if)# show vpdn pppinterface id 1
PPP virtual interface id = 1
PPP authentication protocol is CHAP
Server ip address is 88.103.200.41
Our ip address is 85.71.188.158
Transmitted Pkts: 20, Received Pkts: 16, Error Pkts: 0
MPPE key strength is None
MPPE_Encrypt_Pkts: 0, MPPE_Encrypt_Bytes: 0
MPPE_Decrypt_Pkts: 0, MPPE_Decrypt_Bytes: 0
Rcvd_Out_Of_Seq_MPPE_Pkts: 0
ciscoasa(config-if)# show vpdn session state
%No active L2TP tunnels
%No active PPTP tunnels
PPPoE Session Information (Total tunnels=1 sessions=1)
SessID TunID Intf     State       Last Chg
22298      2 OUTSIDE SESSION_UP 561 secs
[4.]
interface Vlan100
description >>VLAN pro pripojeni do internetu<<
nameif OUTSIDE
security-level 0
pppoe client vpdn group O2
ip address 85.71.188.158 255.255.255.255 pppoe setroute
route OUTSIDE 0.0.0.0 0.0.0.0 88.103.200.41 1

You're right that the ACL should not affect otherwise allowed communications to the interface address.
Try disabling the ip audit feature on your outside interface.
no ip audit interface OUTSIDE AP_OUTSIDE_INFO
no ip audit interface OUTSIDE AP_OUTSIDE_ATTACK

Problem with pdf display downloaded from application server

Hi all,
I have a problem with displaying pdf downloaded from application server (saved in BINARY MODE).
I am getting the pdf output of adobe form in FPFORMOUTPUT-PDF as rawstring back to my program and then converting that rawstring into binary form using the function module SCMS_BINARY_TO_STRING.
Now, when I export the data to presentation server directly using cl_gui_frontend_services=>gui_download, the pdf is downloaded properly.
However, when I save the data to application server file by looping at the internal table obtained from SCMS_XSTRING_TO_BINARY and using TRANSFER, and subsequently downloading the file in "unconverted format" from AL11 to my desktop, I am getting a "blank" pdf file (with the same number of pages as the one downloaded using gui_download).
I have tried different encodings during download but in those cases i get corrupted pdf message. only the default option of INTIAL value seems to work.
I am forced to believe that there is a problem in my code which saves the data to app server but I cant find any solution that is logical. Any solution to this would be greatly appreciated.
Regards,
Sasi
Edited by: Sasi Upadrasta on Sep 29, 2010 7:55 PM

used a program to read the file from appl server and then downloading it to desktop.

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

HT204150 I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

It is locked to your sisters carrier.
She would have to ask her carrier if they unlock iPhones and if she qualifies for this service.

Problem with access to SipFactory from jsp-pages in JBoss environment

Hello!
I have an installation of the OCMS 10.1.3.3. deployed into a JBoss (jboss-4.0.5.GA) environment. Unfortunately I have a problem with accessing the SipFactory from a jps-page. Encouraged by the "messagesender" example I tried to get an instance of SipFactory from my jsp-page simply by calling:
SipFactory sipFactory = (SipFactory) application.getAttribute(SipServlet.SIP_FACTORY);
But unfortunately there seems to be no attribute "SipServlet.SIP_FACTORY" and I only get a null pointer. I have also tried running that code in the orignal messagesender example but it didn't work either. So I wonder if this should definetely work in a JBoss environment or if this might be a known problem. Is there anything that I could check/do regarding this problem? I suppose there must be an oracle module which should take care of making the SipFactory availabe after it is deployed. Perhaps something went wrong during the deployment?!
Best regards,
Tim

Hi
On JBoss, OCMS does not support converge applications.
I.e the SipFactory can be retrieved from the servlet context when running on OC4J.
Instead the SipFactory can be found in JNDI as described in the Developer's Guide:
"External Access to SIP Servlets
To enable convergent applications between SIP and HTTP, the OCMS Container allows you to get access to the javax.servlet.sip.SipFactory by looking it up through JNDI. The SIP Factory will be registered under the same name as the display name of your SIP servlet as illustrated in Example 2–12. The <display-name> in the sip.xml in this case must be "My sip app".
Example 2–12 Accessing the Data for a SIP Session through JNDI
InitialContext ic = new InitialContext();
SipFactory sipFactory = (SipFactory)ic.lookup("sip/My sip app");"
Cheers
Lucas Persson

I how problems with delete/ fix alias

I how problems with delete/fix alias. Somehow, I am trying to delete or fix alias by clicking the icon it show a pop-up saying to click "delete alias" or "fix alias." When I click "delete alias", it wouldn't let me. When I click "fix alias" I could not find what I am looking for. I try clicking different icon, but is show a pop-up saying "it could not be found (error code-43). Can someone help out????

Moved to InDesign forum.
You can start by telling us what the problem is.

I have a problem with downloading app (Twitter) from App Store.

I have a problem with downloading app (Twitter) from App Store. I don't want this app. It is not downloaded yet, the download is still in progress. I have limited data plan and I don't have a chance to finish the download via PC. The size of the app - 33 mb. Could you please cancel the download process so I will be able to remove the icon.

Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here.
Are you able to connect to a wifi network - tapping the app should pause the download of the app and change it to 'waiting', so you should be able to pause the download until you have access to a wifi network.

Synchronisation problem with deleting an appointment from an iterating appointment

Similar Messages

Maybe you are looking for