Synchronise all Apple devices and retrieve data?
Hi, I have just bought a new Apple Pro, having moved from a Windows system. I have an iPad but don't know how to synchronise the two devices. I also had an iTunes account on my old computer which the Mac is showing as empty! Can I retrieve my contents and how should I go about this?
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
Similar Messages
-
How do I delete my existing iCloud account (across ALL my apple devices), and start over from scratch??
(cant seem to get calendars to ever sync right, on my devices, and across to my wifes'....so want to start with a "clean installation")Settings>icloud, scroll to bottom of screen and tap Delete Account (this disconnects the device from icloud but doesn't delete any data on icloud or on other devices).
If you then want to sign back in using a different ID, do so on the same screen.
I also strongly suggest that you and your wife use different icloud accounts, otherwise all your devices will have the same data on them, same emails, reminders, etc. Most likely not what you want. -
I have 3 apple devices and I use the same apple ID for all 3. I would like to create a new I'd for one of my devices, but do not want to loose the apps on that device. Anyone know how I can do this?
Create a new ID:
On the iPod go to
- Settings>Messages>Send and receive and sign out your ID and sign into the other one. Make sure that only her ID email address is listed.
- Settings>FaceTime sign out of your ID and sign into the other one. Make sure that under You can be reached at only the newID email address is listed
- Settings>iCloud and sign out and sign in with the new one
- Settings>iTunes and App Store and sign out your ID and sign in with the new one.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account. -
I need to back up and sync multiple iPhones to a single iMac. Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others. How can I do this without getting all of the contacts, etc. mixed? Tnx
This might help: http://support.apple.com/kb/HT1495.
-
I changed my Apple ID on all my devices and services but iCloud still shows my old Apple ID. How can I get it to update?
I asked the Apple Tech support people and their advice worked for me, it's a setting on the iPad itself. see below.
Follow the below instructions to sign in with your new account name.
1) From the home screen, tap Settings
2) Tap Store
3) Tap Sign Out
4) Tap Sign In
5) Enter your current account name "xxxx" and your password and tap OK.
If you are still unable to change the sign in name on your iPad, please sign into your account on your computer and then sync the iPad so the changes will be updated.
good luck -
My iTunes suddenly stopped working and doesn't recognize any of my devices and gives me a AMD error. I've tried several times to uninstall all Apple programs and reinstall to no avail. I'm running windows 7 on a Dell laptop. It worked fine for years then I decided to update my iPhone 4S and it didn't recognize it or any other iPod or iPad.
Can someone please help ?I am having all sorts of problems with 9.1.1.Crashes and not only iTunes but I have to restart all the time.
GET TO WORK APPLE !!!! -
My safari bookmarks have disappeared from all of my apple devices and I have not deleted or moved them. Any ideas on how I can recover them?
Triple-click anywhere in the line below on this page to select it, then copy it to the Clipboard by pressing the key combination command-C:
~/Library/Safari
Quit Safari.
Select
Go ▹ Go to Folder
from the Finder menu bar. Paste into the text box that opens by pressing command-V, then press return.
A folder window should open. Restore the file named "Bookmarks.plist" in that folder from a backup that predates the unwanted changes. -
Works but not x2 iPad2. WiFi network is the same for printer and all Apple devices. Help.
We are unable to print from ipad2 using Epson Artisan 730 printer. Software download to Macbook was successful but unable to download software to x2 iPad2. All Apple devices are on the same WiFi. I followed the Epson instructions but message box pops up stating Safari unable to download file. Any suggestions.
Welcome to Apple Discussions.
The iPad and iPad 2 using iOS do not use the same software as your Mac using OS X.
They are entirely different operating systems.
Look in the iPad Apps Store for Epson iPrint app for iPad. It is free.
The Artisan 730 is one of the printers the app supports, so this app should allow you to print from your iPad.
If you're looking from the Mac side, open iTunes, and the iTunes Store, then the App Store, and search for Epson iPrint for iPad -
i want to ask company when user update to ios7 it stuck all of device and not clearly about apple id to active how to solve it or just keep all of device into recycle because can not use?
You need to enter the Apple ID and password that was used to set up/activate the phone. There is no way around this.
-
Was not enough room to finish. I tried to uninstall all Apple programs and reinstall but I was asked to validate an unidentified publisher and don't have a clue what that is and could not remove programs. I am not good at fixing stuff on the computer and would like some help with this. I have had iTunes for a long time without issue.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
how to get reading list in my all my devices and computer (window 7). i have installed ios 6 on iphone and icloud control panel on both PC's (home and office) but i dont get updated reading list on all my devices.
Hi bluegrandpanash,
Thanks for visiting Apple Support Communities.
If you backed up your iPhone to iCloud before updating the software, first try the steps under "Restore from an iCloud backup" in this article to recover your data:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Best Regards,
Jeremy -
I have an Iphone 4 and it keeps kicking in the 3G instead of using my wifi. My wifi works well with all other devices and the password is fine. I connect and it show the connection then goes back to 3G. Thank you
This crap just happened to me this morning where I was sent 90% data plan threshold warningfrom AT&T (while sleeping at 7:09am) then 5 minutes later getting the Overage data plan warning from AT&T. This is all while I'm asleep right next to my phone plugged into a (non-Apple) dock on my clock radio.
Android has a limiting feature, why can't the "smart" guys at Apple learn from this?? -
when i go to sync my apps with my computer it tells me ''are you sure you want to sync apps ? all exsisting apps and there data on (iphone) will be replaced with the apps on this itunes library'' does this mean all my data will be lost if i continue ?
Regarding your broken, previously authorized computer, here's how that works:
You would authorize your new computer -- maybe you've done that already. Then you will have two computers authorized. Apple allows you to have up to five computers authorized at any time. If you get to five, you can then go to your account details in iTunes and remove all authorizations.
Bear in mind this is not saying you can synch to more tham one library. Razmee209 and gdgmacguy's comments above are correct. But if Apple only allowed you to authorize one computer at a time, then having a broken computer would mean you could no longer use your Apple ID with iTunes. -
Any way to use OBDC in SAP to access MySQL DB and retrieve data
I'd like to logon to an external MySQL DB (can de done easily enough with PHP) but I'd like to do it with ABAP if possible.
Connecting via OBDC I should be able to retreive the data from the DB and then use it in my SAP application.
Some databases will allow connection via
EXEC SQL.
connect to :dbsid
ENDEXEC.
EXEC SQL.
set connection :dbsid
ENDEXEC.
EXEC SQL.
open xxxxxxx for
select
...... data from external DB
from tablespace in external db
ENDEXEC.
do.
EXEC SQL.
fetch next XXXXXX into
:db_table_field, .... etc
ENDEXEC.
if sy-subrc ne 0.
exit.
endif.
insert table int_sap_table.
enddo.
EXEC SQL.
close XXXXXX
ENDEXEC.
If you can make this type of stuff work for a MySQL DB i'd appreciate the answer.
Using PHP has a drawback as you need to have it installed on the front end PC and run in Foreground.
The EXEC SQL commands run in batch which is what you need if you are talking about 100,000's of records from an external DB.
Cheers
jimboHi Graham
Currently it doesn't seem to support MySQL.
Now that SAP has taken over again the development of MAXDB I can't see it providing direct MySQL to SAP functionality.
MAXDB is available but that would mean changing the entire architecture and we don't want to do that.
I think probably the best route to go would be to create a BAPI which is capable of performing a logon to the remote MySQL DB server, get the data and either send it back as IDOCS, an external flat file, or as an internal table depending on the volume of data to be retrieved.
The good thing about MySQL is that the command line interface makes logging on and retrieving data quite simple.
This data is actually wanted in a BI / BW system to provide for a number of business proces analyses.
I did think abut using "Web Services" but the data retrieval will essentially be done offline.
There is no requirement currently for transferring data FROM SAP back to the MySQL database ( although if you've ever dealt with top level management you know how quickly developments can change).
PHP for all it's drawbacks is the really easy way - but we'll have a problem doing this in background from the SAP servers. For foreground tasks it's a real doddle if you have php on your front end.
for example
<?php
$username = "pee_wee";
$password = "let_me_in";
$hostname = "localhost"; */* IP address of remote DB server */*
$dbh = mysql_connect($hostname, $username, $password)
or die("Unable to connect to MySQL");
print "Connected to MySQL<br>";
// you're going to do lots more here soon
mysql_close($dbh);
?>
Batch mode also seems OK also from the documentation
http://dev.mysql.com/doc/refman/5.1/en/batch-mode.html
so running an ABAP which can issue system commands (readily available) should work in theory provided the SAP server can connect to the remote MySQL server machine.
Thanks for your suggestions however
Cheers
jimbo -
Web Analysis Error -- Error while executing query and retrieving data
Regarding Web Analysis:
We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
The error is:
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native:
1013033[Thu Oct 22 09:08:17
2009]server name/application name/database name/user name/Error91013033)
ReportWriter exit abnormally
Does anyone have any insight into what is going on?
My version information is:
Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
Web Analysis 9.3.0.0.0.286
Thanks in advance for your help.
DaveWHi,
And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
And if you get any error in checking, see the long message(detail).
With rgds,
Anil Kumar Sharma .P
Maybe you are looking for
-
How can I get around the character limit in the "print pages" option
I have a rather large PDF file and I need to print certain pages (for example, pages 1, 324, 456, 759, 812, 946, 1206, 1562, 1792, etc.). However, when I click on print and try to type in the pages, there is a character limit, and it is much smaller
-
HOW I WAS ABLE TO GET ORACLE/LINUX RUNNING
Just like some (or should I say most) of you, it took me pains (one week at that) to get 8i EE running on Linux. Here is how I was able to get it up and running: Environment: * RedHat 6.0 * Linux kernel 2.2.12 * Blackdown JRE (not JDK) 1.1.6v5 * Mem:
-
OIM 11g R2-Issue while configuring oim domain in weblogic
Hi, I'm trying to install OIM 11g R2 version and downloaded the entire suit from edelivery site. Oracle DB version: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production Others like Weblogic, RCU and IdM suite versions are 11g
-
How to render multiple lines of text?
Hi, I have a string variable in a backing bean,which holds multiple lines of text with newline character as the seperator. I have to display it in my jspx page. Which component is suggestable? Thanks, Lokesh.
-
Export Post-Processing Feature Request
Using a post-processing action such as a Photoshop droplet in an export is limited by the command line length which must be sent to the application (Photoshop in this case). This means that exporting a few files will work ok with the action but expor