Synchronise new option in sld

HI Experts
Earlier if we create a technical system /businesssystem or softwarecomponent in an sld we used to explitly export it into our desktop and import it into the target sld , But now we got new option that is synchronization ,does any body used it succesfully ,
i have a doubt if the target sld is not properly synchronized to the source sld then if we chose this option i think it may
not work because synchornizataion is nothing but always incremental export and only full export if it is first time export.And this way of transport can be done only if both are in synch.
What is the case if the both sld's are not in synch and can we use this trnasport procedure. Can any body clarify to my point. whether i am right
regards
sandeep
Edited by: pendyalas on Mar 29, 2011 4:27 PM

Hi ,
First of all to sync the SLD both the SLD must be at the Same CIM model and the CR Delta. Then you must check all the system in the Central SLD are updated properly.
There is setting in the Visual admin of the Child system to send the data to the parent SLD system when ever chnaged.
Visual Admin -> Services -> SLD datasupplier -> second tab is the place where you need to enter Paent SLD in the Child system.
Please refer the not to update the SIM and the CR delta to bring the SLD to same version.
Refer SAP Note 669669 to upgrade CIM model
Setup/Confirm local SLD to send data to Central SLD
NOTE u2013 Do not perform this step until the local SLD has been updated with the latest CIM model and CIM Data/Content as per the Central SLD.
-     Open the Visual Administration for the local SLD instance
-     Goto server  services  SLD Data Supplier
-     On u201CHTTP Setting (Data Supplier)u201D on bottom tab, enter the information specific to STD (Central SLD)
-     To test the connectivity, trigger data transfer to Central SLD by clicking on Lightning Bolt icon on top.
Thanks
Rishi Abrol

Similar Messages

Installing ECC 6.0, XI not full in place Option for SLD

We r Installing ECC 6.0, and we dont have XI fully installed in place and also another ECC 6.0 in place.
While installing ECC 6.0, it gives 3 options reg the SLD configuration as :
> No SLD destination
> Configure a local SLD
> Register in the Central SLD
Which one should I select.
If i select the first option (No SLD destination), in the future can I change it to the last one.
-Naveen.

Hello Naveen,
The first one is telling that u r not using the SLD in u r landscape
The second one is telling that U r about to configure the Local SLD on u r current installation only...
The third thing tell us that if there is already configured SLD in u r previous system and u want to use that SLD for u r current installation then u have to redirect the configuration parameter to the existing SLD only...
AS for example...
In my system previuosly i have one DEV system installed with SLD configuration...after ward i had installed the PRD system and at the time of installation by mistakenly i had installed a new SLD over there in PRD also.....
but after some time as of requriement i have to make only one SLD between DEV & PRD system so later on i will redirect the PRD SLD to DEV SLD...
so after installation u can change/reconfigure u r SLD also...
if you want the steps for the same then let me know..
if this information is usefull to u then please give points..
thanks

Option "No SLD Destination"

Hi,
I need some clarification according to following situation:
On one machine (A) I have installed SAP NetWeaver, Development Subscription, with double stack engines ABAP+Java and all possible usage types. On this machine I have configured a SLD (CEN) and it is running.
On another machine (B) I have diverse other SAP Trials (NSP, J2E, and CE1), they all are using a local SLD.
Now I have installed successfully one further system, a developer workplace including a Java instance and the developer studio on (B). During installation - in phase: parameter settings - I decided SLD-oriented to use the option "No SLD Destination" because I read that there had been given different changes to CTS and SLD since release SAP NW 7.0 SPS13. So I do not want to mix the 'older' SAP versions SLD with the new system, because I want to activate the usage of NWDI (installed on (A) ) via the developer studio.
Luckyly, I found the Wiki of Christian Haarmann who describes the very hard way to post-install a SLD when you have decided yourself to use the option "No SLD Destination".
WIKI: "Walkthrough Installation of SAP NetWeaver Trial and ESS Business Packages"
But he does the way, when all components are on the same machine...
Would it the right way to start post-installation of SLD with his third step: running NWA_03_Creating a connection to the SLD... and to give here the connection data of my central system with the user who is known on that server (A). If so, must this user also known with my machine which I want to use for test development (B)? Reading the newest documents about SLD and looking to the messages during the installation process, I understood that the software components being installed on the development system need no local SLD.
Before I am bollixing up my server machine I need some help and advice from you, the experts, to come clear with this situation.
Any input is appreciated.
Thank you in advance.
Regards
Christian
Edited by: Juan Reyes on Jul 1, 2009 4:55 PM
Edited by: Christian Rauch on Jul 2, 2009 11:43 AM
Edited by: Christian Rauch on Jul 2, 2009 11:44 AM

Monika,
Need not worry at this time if you dont see the screen.You can configure SLD once installation is done.
Thanks
Kalyan

Problem with combo in js IE - new Option(t,v) not working

hello! Did somene had experience some problems with
adding new options in select object (combo box) in javascript? I can change text or value property, delete option by setting it to null, but when I want to add new, there is a problem!?
why this code doesn't work?
<script>
ref = window.document.frmExample["cbo1"];
alert(ref.length);
ref.options[ref.length] = new Option("text'","value1");
alert(ref.length);
</script>
interesting thing is that this works in Netscape (6), but it is not working in IE(5.5), and this is my first and last example where Netscape is 'better'...
Can someone help, please?
regards...
Vlada

you are right, it works in the 'mother' page, but if I want to add some options from popup window (window.open...), and when I accessing combo throught opener propery, than I have problem, because it is not working!?
code sample...
... 'mother' page function ...
function fAdd(){
var popupW;
popupW = window.open("page.html","name",attr);
if (!popupW.opener)
popupW.opener = window;
... popup window function...
function fClick(){
var opt;
var ref = window.opener.document.frmExample1["cbo1"];
alert(ref.length);
opt = "new";
ref.options[ref.length] = new Option(opt,opt);
window.close();
I get alert with the number ofoptions in combo, so ref is OK. I can delete some of them, change, but not to add new! Then I get Error message.
any sugestion!? Strange, but it works in Netscape ...

Element Entry not showing up for new option in a plan after Open Enrollment

I had to add a new option in a plan. I have defined the option, added it to the plan. I setup 2 standard rates for this option; one non-tax and the other taxable. This is an odd example because 1 certain employee falls under Group Health Employee plus Spousal Equivalent Plus Family. Last year the employee had Group Health Employee plus Spousal Equivalent but he still is not married and now has a domestic partner child. So they have asked me to create this option in the Group Health plan. Everything works fine when i choose the new option while the open life event is in started status and i can designee the spousal equivalent and the domestic partner child. But when i close the open life event and go to people and maintain and go to assignment to view the entries this employee has Group Health EE and Group Health EE Taxable still there with an end date of 1Jan08 and when i day track to 2Jan08 he does not have this entries there? What am i missing here? Also, when selecting the option in benefits service center if you scroll to the right there are no rates defined for this option.....but under standard rates i have defined a specific rate to this option and correctly filled out the level, compensation object, activity type, tax type, usage, element, input value and assignment to use. Any information would be greatly appreciated!!!!

I've discovered that the problem is that there is no new file for the new blog entry. The other blog entry was published to the site folder before I was online but now when I hit the publish button it goes straight to uploading to my site, and the new entry doesn't show up as it has no file in the folder. How can I get it to publish to the folder before it uploads?

Update "when new" option in the EO

There are 2 projects, one with Bussiness component and the other with JSP's.
In the EO for an attribute if I set it as updatable "When New" option instead of "Always" or "Never", then it works properly when I test my AM. ie. We can enter a value for his field only at the time of insert. Once we save we can only view the value, we can't update it.
But the problem is in the other project when we run the Insert JSP we cannot enter any value since there is no text field for this attribute.
In the Edit JSP also it is like this. Ofcourse in the Edit JSP it should not allow us to update so the text field should be display only & that is coming correctly but how can it come as a display filed in the Insert JSP ?
In that case there is no difference between setting "Updatable Never" and "Updatable When New".
Please clarify .
Thanks.
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by JDev Team ():
Hi,
I need to know some more details to know exactly why the field is not appearing.
1. Is this an attribute that was included in your EO when you first created it, or one that you added later?
ARCHANA : This attribute was not included later. It was there when I first created it because it is the "Code" which is the primary key.
2. Is this attribute in the View Object your JSP insert page is based on?
ARCHANA: Yes, It is there in the View Object.
3. Is the View Object your JSP insert page is based on made up of one EO, or is it based on more than one EO?
ARCHANA : The View Object is based on one EO only.
4. In your JSP, you can try adding the following code to see if the attribute field will get displayed:
<jsp:useBean id="RowEditor" class="oracle.jbo.html.databeans.EditCurrentRecord" scope="request">
<%
RowEditor.initialize(application, session , request, response, out, "theModule.theView");
RowEditor.setTargetUrl("theView_SubmitInsertForm.jsp");
RowEditor.createNewRow();
RowEditor.setReleaseApplicationResources(true);
RowEditor.setDisplayAttributes("Attr1,Attr2...");
(enter the names of the attributes you want displayed in the setDisplayAttributes method.
Laura<HR></BLOCKQUOTE>
Actually my JSP has exactly the same code as u have sent. I have included "Code" in my setDisplayAttributes() method also. The label for this attribute appears but adjacent to it there is no text control to type the data when I insert data.
Please explain.
null

Creating a New option in Leave absence form

hi all,
In leave absence work flow i want to give a new option for the leave approver along with the Accept and Reject. The new option is Forward. when he choose this option the absence form has to go to his superior officer. How to do this?
Plz reply to this thread asap.
regards,
ravi

You Need to have at least one substitute who can act upon work items in case of forward .
The Substitute agent would be able to see all your work items. A substitute cannot be assigned for only particular area of organization or any other item. So need to ensure that the substitute have the necessary authorizations to act upon the work items.
Procedure:
1.      Go to SAP Business Work Place (TCode: SBWP)
2.      Now from the menu bar, select Settings a Workflow settings a Maintain Substitute
3.      Highlight/Select the name on the window, in this case SAPDEV02 and click on u201CCreate Substituteu201D.
4.      List of users available in the system are displayed.
5.      Select the required substitute user name.
Validity field describes about the period in which the setting would be active. Note that the dates on the screen would range from the current date to 31st Dec 9999.
Important:Regarding the checkbox u201CSubstitution activeu201D, it is advised to leave this checkbox unchecked for system performance reasons. A check in this box indicates that the substitution is u201Cpermanentu201D and if left unchecked it is treated as u201Cas-neededu201D. A permanent substitute will automatically receive the primary users work items in their own box. In the case of u201Cas-neededu201D, substitute must manually adopt the work items from the primary useru2019s inbox.
6.      Save the entries
7.      Click Enter to leave the screen.
hope this may help you
Aakash

How to add a new option for group by in a excel report

Hi,
there is a enhancement in a excel report
I need to add a new option for group by
help me
Regards,
Raghu

k

TS4009 I have followed the steps above but when I get to the screen to select a downgraded option, the Done button is grayed out and won't let me select a new option. I see a lock up in top right-hand corner, but not sure how to unlock it.

I have followed the steps above for downgrading iCloud storage options, but when I get to the screen to select a downgraded option, the Done button is grayed out and won't let me select a new option. I see a lock in top right-hand corner, but not sure where to go to unlock it.

Choose Apple () menu > System Preferences, then click the iCloud icon.
Click the Manage button.
Click Change Storage Plan.
Click Downgrade Options.
Enter your Apple ID password, then click Manage.
Choose your current plan, then click Done.
(from http://support.apple.com/kb/HT5527 )

New option to open custom Excel content type in Excel Web Access

Hi,
This question is specifically for Sharepoint Online if that affects the possible solution.
I would like a custom content type with Excel template to open up in Excel Web Access when a library's New>"My Content Type" option is chosen. I have configured the content type (deriving from "Document"), pointed it to the spreadsheet
template I've uploaded, added the content type to the library and set the library to "Open documents in the browser".
However when I choose the new option for the content type it always opens it in the Excel desktop client. If I then save the document to the library, then it does view and edit in Excel Web App after that.
Is there any way for the initial "New" Excel document to start editing in Excel Web App?
Thanks in advance,
Peter

Make sure Office 2011 is fully updated. It shouldn't have a problem opening those documents.
When I open a 97 - 2004 workbook, it states that it needs to be converted. That may be what is crashing on your copy of Office.
Have you tried creating a new account and see if you can open them there.

How to add a new option to ADF dropdown

Hi,
I got a title field (#{bindings.title.inputValue}) which is pulled from AD, and ‘titlesList’ from a database. The problem is that if the title doesn’t exist on the selection, I will get a blank option. When it is saved, it becomes empty.
<af:selectOneChoice xmlns:af="http://xmlns.oracle.com/adf/faces/rich" id="ssoc2" value="#{bindings.title.inputValue}" simple="true">
<f:selectItems xmlns:f="http://java.sun.com/jsf/core" value="#{employeeBean.titlesList}" id="ssi2"/>
</af:selectOneChoice>
I’ve tried to use javascript to add the new item to the Selection. But when I save it, I got “Attribute value cannot be null”.
I’m thinking about when I create the titlesList in employeeBean, I can add the new title to the list. As long as I know the user ID inside the bean, I can get the title. But, I don’t know how to pass the user ID to the backend from Selection. In jdeveloper 11.1.1.5, I am not allowed to do this "#{employeeBean.titlesList(userID)}". So, how can I add a new option to Selection.
Thank you.
Edited by: 891549 on Jun 7, 2012 4:02 PM

how about adding
<af:selectItem label=" " value="" id="si21"/>to your existing selectonechoice

Hyper-v manager no new option - unable to create new/a vm

Hello,
I have a leptop HP 450 , with Windows 8.1 pro . I am trying to create a virtual machine but I can not do it.
In Hyper-v manager I don't have the "new" option. I have Only "connect to a server" .
My leptop is for home use.
Thanks,

You should connect to local server for see Virtual machine and Management tools on local system.
Do this Steps:
1-Right clik on hyper-v Manager and select "Connect To Server...."
2-On page Select Computer click on "Local Computer" and then click OK.
3-You see Virtual machine (if you haven't virtual machine it was empty) and management tools.
4-Have fun!
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.
LinkedIn:
Facebook:

Puzzled About New Options

According to iTunes Help, the latest update allows one to sort by the artist's last name instead of first. Yet it's description of how it's done sounds like the original way of manually typing, or cutting and pasting the information in the "Get Info" box. This is very laborious when you have hundreds of names to deal with. If I've misread this, can someone put me straight?
Also, what are the new options and sorting options about? For example: "Album by Artist" and the various "Sort by" options.
Dell Windows XP
Dell Windows XP

Thank you for that answer.
You're welcome.
Did you have to work it out yourself? I couldn't find this in iTunes Help.
This seems to be one of those instances where Apple doesn't always document new features that are introduced in iTunes upgrades.
As for how I found out about it, I wish I could say I worked it out myself but for the most part it's something I learnt in this thread . That's one of the side benefits of spending a fair bit of time on these boards - I have a lot of opportunities to learn things.
I imagine that this has to be done every time a CD is copied into iTunes.
I'm not sure. After you select the Apply Sort Field option for a given entry, I don't know whether or not iTunes will apply it to future additions of the same artist to your Library. If you want to check it out, be sure to let us know. Like I said before, that's how we learn things here.
Can you tell me what the "Album by Artist" column is for?
Its main use is when the you're viewing your entire Library. If you have a record with tracks by a number of different artists, the Album by Artist sort will keep that album together unlike an Artist sort which will break it up ... unless of course you've set up the Apply Sort Field option.
The Album by Artist column has been around longer than the Sort Field entry and, as far as I can tell, there does seem to be some overlap in what the two of them accomplish ... although the newer Sort Field certainly gives you much more flexibility in organizing your Library than Album by Artist does.
Also can an artists catalogue be sorted chronologically, rather than alphabetically?
Have you tried the Album by Year sort? Click on Album by Artist column heading and it will change to Album by Year. Is that what you're aiming for? If not post back and explain what you want to achieve.

About new options in 1.5 K8N bios

I have a64 3000+. After flashing to 1.5 bios on my K8N Neo FSR the HT frequency in bios is 1X, and not 4X like before. I will return it manually to former 4x, but why did it drop? There is also a new option, CPU vid 1.450, what is that for?

I am having serious issues with the 1.5 BIOS update. I updated it with the live BIOS. Now I want to revert back to 1.4. Ive done DOS updates before but these instructions I got from the MSI website now have one instruction for FAT systems and systems running Non-FAT partitions. I'm running WinXP SP2 with a NTFS Partition. Which do I follow? If I remember correctly, Just make a boot disk from ME or XP, delete the Autoexec and config.sys files, then insert the BIOS disk once that is booted up and your all set. Do I have this right?
I cant even go over 2080MHz with the 1.5, all kinds of stability issues with GOOD PC4000 memory, bad video card overclocks now. Almost like it's sucking more power. I have a pretty good 500watt power supply though (That Ultra 500 X connect thingy, got it pretty cheap.) Anyway could someone just give a quick run-down of what I do to revert to 1.4? I would greatly appreciate it.
System Specs: MSI k8N Neo Platinum, A64 3200+ (1mb L2, ClawHammer), 1024gb PNY PC4000, 160gb SATA HD, PNY Geforce 6800 Ultra, Audigy2 ZS, HDTV Wonder, Blah blah blah. PLENTY of cooling.
Thank you all and Bless These Forums!!
BJ

I installed the latest update for photoshop CC but the new options (like spin or path blur) are still not active. What to do?

Yesterday, installed the new updates for Photoshop CC. Photoshop tells me that it is up to date with all updates installed but still I can't use them, e.g. the blur gallery doesn't show the spin or path blur. Other new options are also not working. What should I do?

Look for Photoshop CC (2014) in your Creative Cloud application, and press the [ Update ] button next to it (which is in itself more confusing).
-Noel

Synchronise new option in sld

Similar Messages

Maybe you are looking for