Synchronising iPhoto library across two Macs

I have a MacBook and an iMac both with iPhoto '09 installed on them. When I'm travelling I take the MacBook with me and download any pictures I take from the camera to the MacBook, and when I get home I will copy the pictures across to the iMac.
Is there a way of keeping the iPhoto libraries on the two machines synchronised, so that pictures downloaded to the MacBook are (automatically) copied across to the iMac, and any changes made to pictures on the iMac are then synchronised across to the library on the MacBook?
As my photo library is quite big I don't particularly want to keep the library on my iDisk.

Is there a way of keeping the iPhoto libraries on the two machines synchronised, so that pictures downloaded to the MacBook are (automatically...
No.
What do you mean by "Sync".
The general term "Sync means two Libraries (A and B) are compared and files in Library A are copied to Library B, while files in Library B are also copied to Library A so that both Libraries are identical.
This is bi-directional copying and you cannot do this with automatically with iPhoto. No Syncing software is capable of parsing the iPhoto Library in this manner. One or both of your Libraries will be damaged if you try this.
You can have uni-directional copying - this is essentially backing up.
The nearest you can get to syncing is to use iPhoto Library Manager to move files/ALbums/Events plus assoicated metadata between Libraries. This process cannot be automated.
Regards
TD

Similar Messages

  • Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?

    Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?

    It should be in the Users/ Shared folder.
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Note the option to check and repair Library Permissions
    Regards
    TD

  • Can I sync iphoto library between two Mac's?

    I have two Macs (an iMac and a Macbook Pro) and want to sync the iPhoto (6.0.6) library between the two so whenever I change one the other is updated. I thought about using iDisk but my library is apx 5gb. I am new to Macs- is there a utility built into OSX 10.4.9 or hopefully some freeware or very-cheap ware... preferably automated. Thank you very much.

    brettjbyers
    No you cannot sync an iPhoto library between two macs. If you do you will corrupt the iPhoto Library file. iPhoto is a consumer level app, and this feature is not supported.
    What you can do is share the photos but not the library. Each machine will need to have it's own library file.
    The easiest way to do it this is to enable sharing (in the iPhoto Preferences) on both machines (one sharing the library, the other looking for the share). When you do this the shared library will appear in the Source (or left-hand) pane and pics can be dragged from that to the library in the other machine.
    Regards
    TD

  • Sharing iphoto library on two macs?

    Hi Folks,
    I have two macs in the house. One a mini linked to a tv and an iMac. The iMac holds my primary iPhoto Library. What I would like to do is share the same library with the mini mac, without having to use the sharing option. Can I place it on an external drive and link both macs to that library? I am running 10.5 if that makes any difference. Thanks, Andrew.

    Andrew
    If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc. then:
    Quit iPhoto in both accounts
    Move the iPhoto Library Folder to an external HD set to ignore permissions. You could also use a dmg.
    (Some people have had success putting the library in the Users/ Shared folder. If you do this make sure the file permissions are set to allow read/write access to everyone.)
    In each account in turn: Hold down the option (or alt) key and launch iPhoto. From the resulting dialogue, select 'Choose Library' and navigate to the new library location. From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
    However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
    Regards
    TD

  • "Sync" iPhoto library between two macs

    I have an iMac and a MacBook Pro. The iMac is my my iPhoto central - where I usually import, edit etc. However, I'd like to be able to do some editing, deleting, and general cleaning up of the iphoto library while commuting and using my MacBook Pro. Then I'd like to somehow sync that so that my iphoto library iMac reflects the same changes.
    Any suggestions for a strategy/process for this - preferably without using 3rd party applications?
    Would this be easier if I used Aperture?

    Two possibiities:
    1. Use iPhoto Library Manager to create a new Library. Then use it to move Events or albums to the new Library. Then when you've finished the work, merge the two libraries.
    2. Or use Aperture to do the same thing. Select the projects in Aperture and export them as a new Library. After working on them import the library back to the main Aperture library.
    So there are two ways to do what you want.One uses a 3rd party app, one uses an Apple app that is very much iPhoto's "big brother". It's more expensive and much more powerful. It has a significant learning curve.

  • Sync Aperture Library between two Macs

    I apologize if this is an obvious question; I've searched this community and can't find an answer.
    My wife and I currently have iMacs, and we both have iPhoto, and the problem is that we both tend to import pictures we take into our respective iPhoto libraries, but there's no way to easily sync them so we both have all pictures.
    I'm intrigued by Aperture's purported "sync" capabilities. Hopefully, an Aperture expert here can tell me if AP3 has the ability to do what I described above - keep two individual copies of Aperture across two Macs on the same network in sync automatically?

    csk wrote:
    I apologize if this is an obvious question; I've searched this community and can't find an answer.
    My wife and I currently have iMacs, and we both have iPhoto, and the problem is that we both tend to import pictures we take into our respective iPhoto libraries, but there's no way to easily sync them so we both have all pictures.
    I'm intrigued by Aperture's purported "sync" capabilities. Hopefully, an Aperture expert here can tell me if AP3 has the ability to do what I described above - keep two individual copies of Aperture across two Macs on the same network in sync automatically?
    Unfortunately it will be difficult to do this even with Aperture. I'm thinking the the 'sync' capabilities you heard of are Apertures merge library command.
    Merging libraries is meant to facilitate what happens when a single user takes all or a part of their library out into the field and then wishes to merge the changes made when they return. So for instance I take a part of my library make changes to it, add new things to it and then merge it back into the original library. When I do the merge I have to tell Aperture which library to use to resolve conflicts. That is one of the libraries has to be made the master.
    In a situation like you are describing where two independent users make changes to their respective libraries and then try to merge them which library is designated the master? If you make changes to image A in your library and leave image B alone but your wife does the opposite what should the merged library look like? As Aperture is now one or the other would have to rule.
    If its just a question of images you each add independent of the other to your respective libraries you could work something out along the lines of exporting the new project from one library and importing into the other but trying to sync changes between two independent users would be difficult.

  • Using one Itunes database across two macs

    Using one itunes database across two macs
    I currently run a 2010 MBP (500gb hd) at home and on the road and a 2013 Imac (1Tb hd) at work. I have a large lossless itunes library of about 300gb and would like to increase the library further.
    My MBP started running slowly and I realised that my iTunes library was choking the whole computer. I started to explore ways to store my library on a remote disk and bought a G drive 1Tb portable drive.
    My efforts to carry out the transfer were only partially successful with most of my library transferring but a significant number of tracks displaying the ! sign which means they couldn't be located.
    I have also got an Imac at work and what I had hoped to achieve was to have my iTunes database on the 1tb portable drive and use the portable disk on both my MBP and iMac.
    Our technical support company are dubious about whether this will work because the local specific itunes library data on each machine will differ and each machine will not operate correctly with the underlying data on the portable drive.
    I am not very technical and I am finding it difficult to follow the various posts on this board and elsewhere. Many seem to comment on splitting their library across multiple disks but I cant really seem to get to the bottom of storing my library on one disk and using it across multiple computers.
    Is what I am trying to achieve practical?
    If it is, can someone point me to an article/post please? Or alternatively could someone explain how I might achieve my goal.
    Thanks in a advance for your help.

    Here you go.
    http://lifehacker.com/software/itunes/ultranewb--how-to-move-your-itunes-library -to-an-external-drive-238296.php

  • I have 2 Macs - an iMac that holds my entire iPhoto library and a Mac Book Pro that I use to hold a subset of the main library - how can I transfer photos and their metadata from the main library of the iMac to my Mac Book?

    I have 2 Macs - an iMac which holds my main iPhoto library and a Mac Book Pro which holds a subset of the library. How can I transfer photos and their metadata from the main library to the smaller 1 on the Mac Book Pro?

    Link the two Macs together and use iPhoto Library Manager
    Regards
    TD

  • Split iPhoto Library into two?

    If one has an iPhoto Library that is too large to burn to a CD (or DVD), is it possible to split the iPhoto Library into two libraries?
    PowerBook G4   Mac OS X (10.4)  

    I used this method of duplicating the library, renaming, and then deleting appropriate rolls from the two resulting libraries. After doing so, however, my iPhoto applicaton developed some nasty quirks. First, it would not let me rename my rolls. Secondly, it would on occasion unespectedly quit. I do not know if this was a result of my duplicating/splitting libraries, or just bad karma. I tried correcting it by copying back my original iPhoto library from a backup volume, with no results. I repaired permissions, repaired disk, and ran DiskWarrior with no results. Finally, I booted from a cloned drive, checked that iPhoto worked properly on my clone, and then copied the iPhoto library from the clone to my main hard drive, and all was well. So, now I have a working iPhoto, but am stuck with my original large library. As I said, this may have just been an unpleasant coincidence, but I am afraid to attempt to split the library again.
    G5 Dual 2.0, 2GB RAM   Mac OS X (10.4.8)   also running IMac Intel 20/2

  • Merging iPhoto Libraries from two Macs

    Does anyone have a way of physically combining (not just sharing) iPhoto libraries from two macs? I'm hoping there's an easier, smarter way of doing it than just exporting all of the photos from one and importing them into the other and then just doing the reverse. Is there software that does this smarter? Can get rid of duplicates, etc.?

    Merge?
    Do you mean 'sync' libraries
    The general term means when two Libraries (A and B) are compared and files in Library A are copied to Library B, while files in Library B are also copied to Library A so that both Libraries are identical.
    This is bi-directional copying and you cannot do this with automatically with iPhoto. No Syncing software is capable of parsing the iPhoto Library in this manner. One or both of your Libraries will be damaged if you try this.
    The nearest you can get to syncing is to use iPhoto Library Manager to move files/Albums/Events plus assoicated metadata between Libraries. This process cannot be automated.
    The Export/Import route will not get your versions.
    Regards
    TD

  • How can I transfer my iphoto library from a Mac OS Extended (Case-sensitive, Journaled) harddrive to a Mac OS Extended (Journaled) hard drive?

    Community,
    Every time I try to transfer my iphoto library from a Mac OS Extended (Case-sensitive, Journaled) harddrive to a Mac OS Extended (Journaled) hard drive, I receive the attached message: "You can't copy 'iPhoto Library' because it has the same name as another ideon on the destination volume, and that volume doesn't destinguish between upper- and lowercase letters in filenames."
    My theory is, if I am able to unpackage my iphoto library, I can transfer each folder one at a time so that I can trouble shoot any "duplicates." Will this work?
    Let's say that works. How can I repackage the library so iphoto recognizes it?
    Is there a better way?
    Thank you,
    Jonathan

    Can we assume that I don't have any naming conflicts? Clearly there are or else I wouldn't get the error I'm getting.
    The error doesn't mean you have name conflicts. It means that the Finder won't take the chance that you might have them.
    You're suggesting that all I would need to do would be to use Carbon Copy Cloner to transfer the files from the case-sensative harddrive to my Extended Journaled harddrive?
    Yes. But I would just use the built-in rsync shell command. First, back up all data if you haven't already done so. Launch the Terminal application by entering the first few letters of its name into a Spotlight search. Copy or drag -- do not type -- the line below into the Terminal window, then press the space bar:
    rsync -aE --delete
    Now drag the iPhoto library you want to copy into the window. You should have something like this:
    rsync -aE --delete /Users/you/Pictures/iPhoto\ Library
    Drag the Pictures folder on the destination volume into the window. Now you have this (line will wrap on the page):
    rsync -aE --delete /Users/you/Pictures/iPhoto\ Library /Volumes/something/Users/you/Pictures
    Press return. The copying operation will start. When it finishes, you'll see a new dollar-sign ("$") prompt below what you entered. If there were no errors, you're done.

  • Sharing iPhoto Library between Two User Accounts

    Is there any way to fully share a single iPhoto library between two user accounts on one machine (iMac 2.0GHz dual core Intel, 10.5.1, iPhoto '08), without using an external drive (because I don't have one)? By share, I mean each user has full rights and priveledges to the entire library, regardless of who uploaded the pics. Holding down the option key on iPhoto startup does not work because my wife can't access the pics I loaded even though she's pointing to the shared library in a shared folder.

    If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc. then:
    Quit iPhoto in both accounts
    Move the iPhoto Library Folder to an external HD set to ignore permissions. *You could also use a dmg*.
    (Some people have had success putting the library in the Users/ Shared folder. If you do this make sure the file permissions are set to allow read/write access to everyone. But that's unlikely to work on 10.5 because of the way that the permissions have changed with the new OS.)
    In each account in turn: Hold down the option (or alt) key and launch iPhoto. From the resulting dialogue, select 'Choose Library' and navigate to the new library location. From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
    However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
    Regards
    TD

  • How to use a single iPhoto Library from multiple macs

    I'm trying to help my brother out with his iPhoto Library and his Mac network.  He has a Library on a MacBook Pro that is about 65GB.  I am moving it to his Mac Mini to make it the primary Library.  What he wants to do is be able to load new photographs from any Mac in his house and have them appear in the primary Library.  If I make the Mac mini shareable and point iPhoto on each of his Mac's to the Library on the Mac Mini, will that work?
    Are there any down sides to doing it this way?  Can you create multiple Libraries for iPhoto, the other thing we are thinking about is to organize his Library by years.
    Thanks
    Elliot

    What do you mean by "make the Mac mini shareable"?
    Iphoto is not really designed for this kind of use, but there are some possibilities - with limitations.
    I'm assuming you want to use the same library for each machine, so there is only one.
    Put the Library on a disk formatted Mac OS Extended (Journaled) and set to ignore ownership and permissions.
    Then point each machine at it in turn.
    Remember only one machine can access the Library at a time, and attempting to do so with multiple machines can cause damage.
    How are you connecting to the Library? A strong warning: If you're trying to edit the Library (that is, make albums, move photos around, keyword, make books or slideshows etc.) or edit individual photos in it via Wireless be very careful. Dropouts are a common fact of wireless networking, and should one occur while the app is writing to the database then your Library will be damaged. Simply, I would not do this with my Libraries. 
    Regards
    TD

  • How can I move my iPhoto Library from one Mac to another without losing the comments on the individual photos in the process?

    How can I move my iPhoto Library from one Mac to another without losing the comments on the individual photos in the process? The source Macbook (OS 10.4.11 and iPhoto 6.0.6 (3.2.2.)) is with my husband in Germany, the target MacBook Pro (OS 10.8.5, iPhoto 11) is with me in Japan. Thanks for your help.

    I copied the iPhoto Library to a CD and from there to the new MacBook
    If you copied the library to the CD via the Finder it would be no different than the methods Terence suggested.  If you used the Share ➙ Burn menu option from inside iDVD you'll get a mini library that has to be accessed from the open library and the events/alubums copied into the destination library.  Not the same as the other methods.
    The Share ➙ Burn method is no longer supported with iPhoto 9 and later.
    OT

  • Sync Address Book across two Macs w/o .Mac

    How do I sync two address books across two Macs without using .Mac?

    Hi
    There are several third-party solutions. When I was without .Mac I used Address-O-Sync. You can find others on versiontracker.
    Matt

Maybe you are looking for

  • Getting exception error FUNCMOD_NOT_FOUND

    getting exception error FUNCMOD_NOT_FOUND Regards Rabin

  • Add/delete for table

    Hi,             I have an ALV GRID table with a few rows in ABAP WDA from which i need to select one by one record and bind it to a node. Example : ALV Grid  Data R1 - 1234 - pppp - 11 R2 - 2345 - ttttttt -  12 R3 - 3456 - eeee-  13 ADD BUTTON user s

  • FaceTime now connects on the Yosemite and imac

    Aafter some time and effort, I can now agree with whoever on here who said the Ethernet cable has to be removed to make FaceTime able to make phone calls. I had both wireless and Ethernet connected. No luck at all. I read the post about using only wi

  • Movies with iTunes Extras show only HTML code and not title screen when double clicked.

    I only noticed this after some iTunes updates.  Any movies that have iTunes Extras donot show the "Title Screen" when double clicked.  They only show HTML script.  I can still watch the movies, and can access the extras by going to the folder they ar

  • Modifiy number of inserts and number of errors, etc variables

    Hi! i need your help... when you execute an 'normal' interface (just copy table to another table) and then, you go to the Metadata Navigator (or operator), in each step of the ikm (and other), is a parameter that indicates de number of error, number