Synchronization between X2-00, E6-00, Microsoft Ou...

Hello.
1. Is it possible to synchronize Contacts, Calendar, Notes & Tasks entries between X2-00 and X6-00.
2. If not, can we use Microsoft Outlook to synchronize between these three (laptop, x2 and e6).
3. I am using the outlook with the same folders and it is not working well.
4. Any application to lock keypad on E6-00 with a touch before the timer locks it.
Any suggestions? Thanks. Arvinder.

Firstly, You sadly won't be able to synchronise the phones via bluetooth which has worked great for me between nokia to nokia upgrades and is usually the fastest, Mainly because one is a series 40 (X2) and the other is a series ^3 (E6).
Your best bet is to install nokia pc suite and use it to back-up everything you need from the X2, Then connect your E6 and transfer everything back to the E6.
I've used this procedure when bluetooth hasn't been an option, But it can't guarantee it will be able to transfer everything.
Nokia E6 (FW:021.014), Unbranded, Sim-Free, Unlocked.

Similar Messages

  • Synchronize between promatric account and microsoft account

    hi
    i try to make Synchronize  between promatric account and microsoft account but he con not find the certificate i toke it,

    Hi ahmad_alnjjar,
    It might seems that the training center have created a new MCP ID for you. To solve your problem just give a call to your Microsoft Region Service Centers (https://www.microsoft.com/learning/en-us/help.aspx) by calling them to merge your 2 MCP IDs to one
    account.
    Hope this helps :)

  • Password synchronization between OID and AD - 10.1.2

    Hi,
    I've some questions about the following issue:
    I've tried to setup the password synchronization between OID 10.1.2 and active directory, with the intent of exporting ldap users from OID to AD..
    Well, the bootstrap gone fine, but when I tried to activate the export of password in the activexp.map configuration file,
    I've obtained this:
    *Writer Thread - 0 - [LDAP: error code 53 - 0000001F: SvcErr: DSID-031A0FC0, problem 5003  (WILL_NOT_PERFORM), data 0*
    for each entry I tried to export...
    I've opened a SR on metalink and I've received the following answer:
    _"  As shown by the synchronization profile, currently you have a mapping for the password from OID to AD._
      _userpassword: : :person:unicodepwd: :person:_ 
      _According to the documentation, password synchronization requires the directories to be configured for SSL mode:_
        _http://download-uk.oracle.com/docs/cd/B14099_12/idmanage.1012/b14085/odip_actdir003.htm#CHDEFIED_
    _18.3.2.8 Synchronizing Passwords_
      _You can synchronize Oracle Internet Directory passwords with Active Directory._
       _You can also make passwords stored in Microsoft Active Directory available in Oracle Internet Directory._  
       _Password synchronization is possible only when the directories run in SSL mode 2, that is, server-only authentication."_
    The SSL setup is the only way to achieve this, or there's another alternative?
    Thanks                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Yes. It needs to be in SSL.
    http://download-uk.oracle.com/docs/cd/B14099_12/idmanage.1012/b14085/odip_actdir003.htm#CHDCJHHB
    Some excerpts:
    Active Directory Connector uses SSL to secure the synchronization process. Whether or not you synchronize in the SSL mode depends on your deployment requirements. For example, synchronizing public data does not require SSL, but synchronizing sensitive information such as passwords does. To synchronize password changes between Oracle Internet Directory and Microsoft Active Directory, you must use SSL mode with server-only authentication, that is, SSL Mode 2.
    -shetty2k

  • Password synchronization between two domains

    Hey everybody,
    we have currently the situation, where we comes to password synchronization between Domain A and Domain B. Trust relationships are not possible caused we need separated authentications between productive network and user tools.
    So we would sync from Domain A (windows 2008 R2) --> Domain B (windows 2008 R2)
    Domain B would also replicate per Okta to Office365 Cloud.
    Now my question, could anyone point me in the right direction, what tools are usefully on the market to accomplish these issues.
    Sorry for my limited english.
    Best and thanks

    You can try using FIM with PCNS to sync passwords from Domain A to Domain B: https://technet.microsoft.com/en-us/library/jj590203(v=ws.10).aspx
    As for Office 365, you can simply implement an ADFS platform and federate it so that your users will be using their AD passwords. It is also possible to sync passwords with DirSync.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • I kept a dual boot of windows 7 and mac os x lion in macbook pro. so, should i keep antivirus for windows 7? which is prescribable between bit defender(bd) and microsoft security essentials(mse)?does bd and mse un-installs easily?

    i kept a dual boot of windows 7 and mac os x lion in macbook pro. so, should i keep antivirus for windows 7? which is prescribable between bit defender(bd) and microsoft security essentials(mse)?does bd and mse un-installs easily?

    lower your font size unless you have difficulty
    MS Security Essentials is excellent
    Then again maybe time to investigate Windows 8 RP (which uses Defender)

  • How to ...synchronization between two databases

    Hi,
    I want to set up automatic synchronization between two databases. For example, database DB1 and DB2 have table t1 and t2 with the same columns. If someone updates a record in table t1, I want automatically update the record in t2 or vice-versa.
    How can I make an automatic system like that?

    1) What is the business goal you're trying to satisfy? Failover, reporting, replication, geographic co-location, etc. each have their own set of technologies. Explaining what you're trying to accomplish from a business perspective will help us identify which technology (or technologies) to focus on.
    2) Are you synchronizing a single table? Or multiple tables? Or all the tables in a schema? Or all the tables in a database?
    3) Is there a stable network connection between the boxes?
    4) What version of Oracle do you have (10.2, 10.1, 9.2, 9.0.1, etc)? What edition (standard, express, enterprise, etc)?
    5) How quickly after a change has been made on DB1 does the change need to reflect on DB2?
    6) Am I correct in understanding that you want to be able to change the same row of data on either DB1 or DB2? So the replication needs to go in both directions?
    Justin

  • Synchronization between B1 and third party software

    Hi Experts,
               Is it possible to synchronize between SAP B1 8.8 and Third party software.Here the third party software comes as 'LIBSYS' which is used for Library purpose.so we need to synchronise some data between B1 and Libsys.So if i have to install any software for synchronisation,please suggest me a best
    With Regards,
    Kambadasan.v

    Hi Kambadasan,
    It is extremely difficult or impossible to do exact synchronization with any two independent systems. I believe that library system has too many unique process that is not covered by B1.
    Thanks,
    Gordon

  • Synchronization between Oracle Calendar 10.2 and Exchange 5.5 calendar

    We are going to migrate 1000 users from Exchange 5.5 to OCS 10.1.2.3.
    Mail and Calendar migration is done with ES/EX-migrate, but we have a PABX system (Trio Present 2.3) that is integrated with Exchange Calendar,and this is not compatible with Oracle Calendar in its current release.
    In simple terms Trio is integrated with the calendar to programme our phones to "Busy", "Home Sick", "Meeting" etc, based on calendar entries.
    In order to preserve this functionality we have to "coexist" with Exchange's calendar.
    I see in the Coexistence guide that this is possible to booke meetings in both alendars, but we need a synchronization feature, as the users can booke meetings through their phones, which are then inserted in Exchange, but not Oracle.....
    Any idéas ?
    Regards,
    André

    If you find a solution that actually synchronizes between Oracle Calendar and Exchange, let me know. I don't want the Outlook connector - which creates access to the Oracle Calender using Outlook - I actually want to synchronize between the Exchange calendar and the Oracle Calendar. This way, if I update Exchange (using Outlook), Oracle Calendar will be updated when I synch. Also, if I modify the Oracle Calendar, the Exchange Calendar will be updated. We are using Exchange 6.
    Thanks,
    Fuller Ming, Jr.
    [email protected]

  • How to synchronize between DHCP binding table and DHCP snooping table ?

    I clear DHCP snooping table with command "clear ip dhcp snooping binding " , and PC can't communicate with other any more. So how to synchronize between DHCP binding table and DHCP snooping table ?
    dhcp-test#sh ip dhcp bind
    IP address Client-ID/ Lease expiration Type
    Hardware address
    99.1.65.32 0100.1125.353c.25 Mar 02 1993 01:05 AM Automatic
    99.1.65.33 0100.1438.059f.85 Mar 02 1993 12:01 AM Automatic
    dhcp-test#sh ip dhcp snooping binding
    MacAddress IpAddress Lease(sec) Type VLAN Interface
    Total number of bindings: 0
    thanks!

    ip dhcp snooping binding mac-address vlan vlan-id ip-address interface interface-id expiry seconds
    Add binding entries to the DHCP snooping binding database. The vlan-id range is from 1 to 4904. The seconds range is from 1 to 4294967295.
    Enter the above command for each entry that you add
    To delete the database agent or binding file, use the no ip dhcp snooping database interface configuration command. To reset the timeout or delay values, use the ip dhcp snooping database timeout seconds or the ip dhcp snooping database write-delay seconds global configuration command.To renew the database, use the renew ip dhcp snooping database privileged EXEC command.

  • Synchronization between multiple DAGs

    Hi,
    Is there any possibility that we can have synchronization between 2 DAGs. We want to have 2 DAGs in 2 sites. Replication between 2 DAGs should be realtime.
    Is there any such possibility?
    Thanks
    Anees

    Right and this is by design. Exchange will not mount the databases in Site B, because Site B doesn't had quorum. Site A still has node majority.
    In that case I would look into Datacenter Activation Coordination (DAC).
    Section towards the bottom titled "Enabling Database Activation Coordination Mode (DAC)"
    http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/planning-deploying-testing-exchange-2010-site-resilient-solution-sized-medium-organization-part7.html
    A later part in that series walks you through the Site Failover experience and all the pitfalls to watch out for.
    http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/planning-deploying-testing-exchange-2010-site-resilient-solution-sized-medium-organization-part12.html
    Check out my latest blog posts on www.supertekboy.com A tech blog for I.T. Superheroes.

  • No calendar synchronization between outlook2010  iphone4  and mobileme

    Since I bought mobileme everything went wrong.
    I can synchronize between mobileme and my iphone 4 (IOS 4.1)
    But this is all.
    No synchronization between outlook (2010) and mobileme (1.6.2)
    No synchronization between outllok and Iphone
    I tried almost everything..
    I removed itunes and reloaded itunes
    I removed mobile me and reloaded
    I repared Outlook
    I removed Outlook and reloaded outlook
    and finally I removed Office pro 2010 and reloaded it..
    Nothing worked at all..
    I have another computer (at home) which is perfectly synchronized, with mobileme, outlook and my iphone.. Also a PC Windows XP pro.
    I only use a single calendar..
    I cannot find what's up here. And of course asked several expert groups
    and obtained no answer. May be some of you experienced the same trouble and I could appreciate your feedback of what you did to fix this
    looking formard hearing from you
    Best regards
    Jacques

    Well, I have checked the iCloud settings on the phone. As I have mentioned above the are obviously storage at the iCloud in use because I can see that there are less than 5GB avaliable. But I can not see the new calendar entries on the phone.

  • Password synchronization between more clients

    Hello All,
    Does anyone know how can I do to synchronize the password of user between more than one client; I explain in 46C I have an abap to write the password wher you are logging into other client of the same SAP instance. If you are logged on client 500 the report write the password of user from client 500 to client 600 and client 000.
    This report write in USR02 table (USR02-BCODE = PASSWD)
    but in ECC6 this report doesn't running
    Does anyone explain why ? may be in ECC6 exist another table or something like that
    Thanks in advance for your reply
    Bernard
    [email protected]

    You can try using FIM with PCNS to sync passwords from Domain A to Domain B: https://technet.microsoft.com/en-us/library/jj590203(v=ws.10).aspx
    As for Office 365, you can simply implement an ADFS platform and federate it so that your users will be using their AD passwords. It is also possible to sync passwords with DirSync.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • No calendar synchronization between iOS 6.1.3 and Mac OS 10.9

    Dear all,
    I am using an iPhone 3gs with the latest supported iOS 6.1.3. On the other sise I use an iMac with OS 10.9.(Mavericks)
    I want to synchronize my calendar details between these two devices. I have configured my iCloud Account and my calendars are visible when I log in by using a web browser. I have also checked the Storage & Backup Settings on the iPhone and there obviously storage at the iCloud in use because I can see that there are less than 5GB avaliable.
    But the new calendar entries are not available on the iPhone.

    Well, I have checked the iCloud settings on the phone. As I have mentioned above the are obviously storage at the iCloud in use because I can see that there are less than 5GB avaliable. But I can not see the new calendar entries on the phone.

  • Synchronization between iBook G4 and MacBook

    Hey there!
    I just got my new MacBook and I love it! Til today I have had the last generation of the iBook G4. I want to synch both. The iBook-data should mirgate to my new MacBook. Earlier that worked a fire wire connection. Now I recognized that the MacBook does not have a fire wire sonnection. How does the synchronization work? With USB 2.0???
    I would appreicate any comments which helps me to solve this "problem"...
    Thank You!

    The cable works fine, tried it between the PowerBook G4 and an external hard drive.
    The MacBook does not boot. It turns on to a blank white screen and stays there. It won't boot into safe mode or single user mode or anything like that.
    Yes, I do have the install discs and put them in to try and reinstall Leopard. They boot, but the hard drive won't show when it asks me where to install. I hear there's a bug with the hard drive not appearing there and waited up to an hour on that screen, but that didn't make it show either. Then I went into Disk Utility, but the hard drive wouldn't show there either. At some point it did, but I couldn't run a repair on it. Then I restarted with the installation disc in again and then it wouldn't show at all.

  • Share Data Source between multiple report projects in Microsoft SQL Server 2012 Reporting Services

    I have a reports solution in 2012 which contains multiple report projects one each for target deployment folder and we use TFS 2012 for report deployment.
    We have a template project which has a bunch of template reports and all the datasources used in different reports.
    When I develop a report, I cannot "Preview" in TFS but, for deploy this used to work fine util the reports solution was in TFS 2010 & Visual Studio 2008 R2. Since we moved to TFS 2012 & SSRS 2012 not being able to deploy till I create all
    the necessary datasources for each project and now all the developers complaining that they cannot develop reports in TFS itself as they cannot preview (this problem was existing previously) and now not being able to deploy as it errors for each report "Could
    not find specified rds file". I tried messing around with the .rptproj file DataSources tag that did not help either by modifying it like below.
    <DataSources>
    <ProjectItem>
    <Name>DB.rds</Name>
    <FullPath>Template\Data Source\DB.rds</FullPath>
    </ProjectItem>
    </DataSources>
    Is there a way I could share a Data Source between multiple projects in Microsoft SQL Server 2012 Reporting Services?
    Thanks in advance.............
    Ione

    Hi ione721,
    According to your description, you want to create a shared data source which works for multiple projects. Right?
    In Reporting Services, A shared data source is a set of data source connection properties that can be referenced by multiple reports, models, and data-driven subscriptions that run on a Reporting Services report server. It must be within one project.
    We can't specify one data source working for multple projects. In this scenario, we suggest you put those reports into one project. Otherwise you can only create one data source for each project.
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

Maybe you are looking for

  • Opening balance very urgent....

    Hi Experts, Plese could anyone give me logic for How to calculate Opening balance and Closing balance for perticular period? Thanks in Advance... sudha.

  • R/3-extraction to multiple BW-Systems

    Hi everybody, I was asked if it is possible to do the same data-extraction from one R/3-source-system to multiple BW-Systems (I don't mean various cubes in one system) I can't find any information about this topic! I hope one of you can help me! Than

  • Orange UK website

    Has anyone had any luck accessing their current usage on the Orange website. I have one of their plans and would like to monitor my usage to avoid paying excess charges. The website has links to current usage which do not show any data having been us

  • Helpful and Correct icons are not shown (anymore) on certain threads only

    I think there is a bug somewhere as i.e. at the top of this thread Re: Need Help in writing the Business Rule I can read "This question is answered. Helpful answers available: 5. Correct answers available: 1. " But not a single of the following answe

  • Set reference point for coordinates

    How to set the reference point for a rectangle in coordiate system using javascript? I want to set this value before setting the geometricBounds property Thanks.