Synchronization fails @ end of sync cycle sonyE w800 usb & bluetooth HELP!

I have tried everything I know to sort this problem . The phone still works fine for file transfer via bluetooth or usb i.e photos or mp3 etc . and there is no other problem with the phone .
I have made a master reset of the phone and deleted and rerergistered the phone as a bluetooth and bluetooth device several times .This also works fine Everything appears normal but isync fails . the problem first started about a week ago perhaps after a crash . I have also attempted to sync the phone via usb and receive the exact same error which leads me to think the problem is with isync rather than any of the protocols .
I deleted the isync and bluetooth prefs but didn't make any difference .
when I try to syncronize the phone , via isync , it runs fine but right at the end of the sync it returns the error" An unexpected error occured.
Device "W800i:-)" synchronization failed" . this is with usb or bluetooth synchronization .
opening console I can see the following type of dialogue over and over " 14:15:02.498 [iSync:2471] ERROR (.sync.SyncConduitManager): Exception catch: [ISyncConcreteSession clientRefusedChangesForRecordWithIdentifier:]: I know nothing about a record with identifier A6DF4542-842F-462C-B8CF-9EDA75DFF821. Are you sure you got it from this session or from the session's snapshot? If so, perhaps it has been deleted?
2007-01-28 14:15:03.682 iSync[2471] we receive the end of our sync plan".
This doesn't mean much to me but maybe can help someone help me .
btw the sE gives me the error message "session failed/communication interuptted" .
any help appreciated .

Have you tried resetting the iSync history in iSync prefs?
Or syncing just contacts, or just calendars, to see if one will allow a full sync.
Or syncing just a small group of contacts.
There may be some corrupted data in either Address Book or iCal that is tripping iSync up.

Similar Messages

I have a new iPad wi-fi lte 16gb.when I try to sync thru I tunes it keeps on accessing I tunes stores.i have windows xp service pack 3.after running diagnostics it showed iTunes secure connection failed.unable to sync completely even once. Plz help.thanks

I have a new iPad wi-fi lte 16gb.when I try to sync thru I tunes it keeps on accessing I tunes stores.i have windows xp service pack 3.after running diagnostics it showed iTunes secure connection failed.unable to sync completely even once. Plz help.thanks

I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Everytime I sync my iPhone 4 it pops up a notice saying that my iphone cannot be written to or read from. wont apply changes at the end of the sync cycle.

everytime I sync my iPhone 4 it pops up a notice saying that my iphone cannot be written to or read from. wont apply changes at the end of the sync cycle. it synced once and now nothing! help?

Did a health check on my Drive D: Issues were found and repaired. Disabled Kaspersky and tried a sync with iTunes (Success). Re-enable Kaspersky and iTunes is still working. Interesting in that I thought my iTunes only involved Drive C: What led me to problems with Drive D: were indications that there was a problem with Adobe cache for Adobe Bridge. I also purged that cache. In looking at my nightly backup there was also an indication there had been some intermittent issues of not being able to read the disk.
Bottom line... all is working again and need to continue to monitor the health of my second hard drive.

Outlook Calendar Synchronization Failed

I'm a desktop tech at my local hospital and I have a doctor that cannot sync his Palm Treo 680 with his outlook calendar anymore after his profile was rebuilt..
I've been trying to get this syncronization to work for over a week now =(.. to no avail.. I've uninstalled, reinstalled, tried installing it on another PC and I've tried almost every fix I can find.
Error:
Outlook Calendar
OLERR:0D-034
OLERR:0D-026
OLERR:0D-0006
OLERR:0D-0004
OLERR:0D-001
-Fast Sync
Outlook Calendar Synchronization failed
for awhile I was getting one of those EASNotify8009) errors and I renamed the EASNotify.dll file but after doing that it wouldn't sync email at all =(
I've really been through everything with this and I am at wits end. Even if you could recommend me another 3rd party sync software that would be AMAZING.
thanks in advance.
Post relates to: Treo 680 (AT&T)
Message Edited by brianx4 on 07-31-2008 05:30 AM

I saw this solution and he doesn't have any events that span overnight but he does have reoccuring events with no end date.. his defense was that it was working before and these reoccuring events with no date were there..
could an update have come out that changed this issue for outlook?
Post relates to: Treo 680 (AT&T)
Edit: I was thinking about trying to Sync with Active Sync. do you guys think this would be ok?
Message Edited by brianx4 on 07-30-2008 12:10 PM

A Calendar Synchronization Failed problem

Yes, I searched and read the related threads with solutions.
I installed DBFixIt and ran it, it now scans with no errors and no deleted records,
still calendar synchronization fails. (Both EZ and Advanced were tried.)
I installed DateBk6 (Thank you! I had heard of it, and love what Pimlico has done!)
It reads and uses the data just fine, still calendar synchronization fails.
I tried renaming the user tree on my computer, forcing it to create all new files on the synch,
still calendar synchronization fails.
In fact, the entire datebook subdirectory was empty after it was created.
I am at my wits end, there has to be something I can do ... something that I am overlooking.
Thank you in advance for whatever help can be had.
Post relates to: Treo 650 (Cingular)

Are you trying to sync to Outlook? If so, try to sync to Palm desktop for a given hotsync. What is the hotsync log doccumenting for the Calendar sync specifically. A copy & paste of that would be nice.
Post relates to: Treo 650 (Unlocked GSM)

After two years w/o problems, T610 Synchronization Failed ...

For about two years, I've had no problem syncing my SE T610 with Address Book and iCal.
Yesterday, I synced with no problem.
Today, I've been trying to sync and continually get the message:
An unexpected exception occured while synchronizing the device. Device "T610" synchronization failed.
I repaired the permissions and reset the device. Nothing.
Here's what I see in console, but I have no idea what it means:
2006-04-02 12:26:41.179 iSync[1076] SyncServices precondition failure in [ISyncConcreteSession setClientInfo:forRecordWithIdentifier:]: no such record with identifier com.apple.syncservices:23D9D4AE-26C4-42F6-87F2-EA7ADB0C7947
12:26:41.179 [iSync:1076] ERROR (.sync.ConduitManager): . Exception catch: [ISyncConcreteSession setClientInfo:forRecordWithIdentifier:]: no such record with identifier com.apple.syncservices:23D9D4AE-26C4-42F6-87F2-EA7ADB0C7947
[iSync] we receive the end of our sync plan our sync plan
Please help.

The easiest way to attempt a fix for your error condition is to launch iSync, open the Preferences… dialog and press the Reset Sync History… button.
Executing that process will not remove any data from your devices, servers or applications, but it will reintialize the truth database which is the central repository for data in the SyncServices framework, and will effectively force a first-time synchronization the next time you initiate an event.
To protect your data, you should use the built-in backup feature available under the File menu of both iCal and the Address Book to back up your calendaring, task and contact records before initiating that next 'first' synchronization event.

ISync stalls in synchronization mode after succesfull sync

My iSync application (2.4) stalls in synchronizing mode.
The changes are applied succesfull both ways: from MacBook to phone (Sony Ericsson K750i) and from phone to MacBook. This also shows in the sync log. But after iSync has done it's job, it stalls in the last screen of the synchronization, with a full statusbar and the "Cancel Sync" button never-endingly rotating.
Here's a grab of the window.
http://home.student.utwente.nl/j.vanhengel/iSync_hangs.tiff
To perform a second synchronization, I have to cancel the still active synchronization and click "Sync Devices". This does not affect the first synchronization, because it is already finished succesfully. Same goes for quiting iSync, it politely asks me if i really want to cancel the synchronization and quit.
This problem is not critical, but it is annoying. Got help? - Jurriaan

Another attempt to sync Calendar and Tasks between the Mac and a Treo 680 resulted in calendar entries exchanged between the 2 devices (but not sync'd), and failure to load any Tasks from the Mac to an empty Task list on the PDA. Error message in the Palm Desktop Sync Log is as follows:
HotSync 3.2.1 started 2/22/08 5:35:51 PM
Local Synchronization
Install did nothing
iSync Conduit starting 2/22/08 5:35:53 PM
Warning: SyncCloseDB returned 16385 for database DatebookDB 2/22/08 5:57:25 PM
Warning:SyncOpenDB returned 16385 for database ToDoDB, cannot process request 2/22/08 5:57:46 PM
Warning: couldn't open requested database for add record request for id 0 and creator 746f646f 2/22/08 5:57:46 PM
iSync Conduit: Sending Error Response 7: iSync Conduit: Error occured adding record 2/22/08 5:57:46 PM
iSync Conduit: received NULL message, disconnecting... 2/22/08 5:57:46 PM
OK iSync Conduit
iSync Conduit synchronization failed
'iSync Conduit' failed (error = Unknown Sync Error)
Unknown Sync Error synchronization failed
Any suggestions to overcome this issue?

Synchronization Failed from isync Conduit iCal

I'm having difficulty syncing iCal and a Palm Z22. First, I export my calendar in iCal format from Sungard/SCT which is used at my school. While importing into iCal I get the following message:
"Some of the events in this calendar have alarm that open files or applications"
which is related to Sungard/SCT sending email reminders I believe. I choose:
"Remove Unsafe Alarms"
When I try to sync, I get:
"Synchronization Failed from isync Conduit iCal generated exception
NSInvalidArgumentException: * -[NSCFString emailString]: selector not
recognized. Can't get record with ID
DAC3BE84-7CDA-11DA-81BF-000D936862681104180844."
Here is that record I believe:
BEGIN:VEVENT
X-NSCP-TOMBSTONE:0
ATTENDEE;CN="Steven Beaty";CUTYPE=INDIVIDUAL;PARTSTAT=ACCEPTED;ROLE=REQ-
PARTICIPANT;RSVP=TRUE;X-NSCP-ATTENDEE-GSE-STATUS=2:beatys
RECURRENCE-ID:20050103T210000Z
X-NSCP-LANGUAGE:en
SEQUENCE:4
X-NSCP-ONGOING:0
X-NSCP-GSE-COMPONENT-STATE;X-NSCP-GSE-COMMENT=REQUEST-COMPLETED:131074
PRIORITY:0
DTEND:20050103T211500Z
X-NSCP-DTSTART-TZID:America/Denver
UID:DAC3BE84-7CDA-11DA-81BF-000D93686268
DTSTART:20050103T210000Z
X-NSCP-ORGANIZER-EMAIL:[email protected]
ORGANIZER;SENT-BY="[email protected]";X-NSCP-ORGANIZER-UID=beatys:beatys
X-NSCP-ORIGINAL-DTSTART:20050103T210000Z
LOCATION:My office
LAST-MODIFIED:20050710T064906Z
TRANSP:OPAQUE
STATUS:CONFIRMED
SUMMARY:Meet with Pat and Noel
DTSTAMP:20060104T043047Z
CREATED:20040916T211304Z
END:VEVENT
Versions:
iCal 1.5.5
iSync 1.5
iSync Palm Conduit 1.2
Palm Desktop 4.2.2
Anyone know what is wrong? Thanks.
iBook G3 Mac OS X (10.3.9)

Got it. That's very clearly a problem you're going to have to address at the source - the export stage - rather than from iCal after import.
Have you spoken with the campus technology staff familiar with SCT Banner or SCT Campus Pipeline about the issue? Surely, they must be familiar with 'standards-based' calender export.
The problem here is that there are SO many component parts: the SCT program, the exported files, iCal, iSync and Sync Services. It could be that Apple has failed to properly account for and handle something produced by the SCT programs, but it seems far more likely that the export files are non-standard. The exported records are essentially considered 'mal-formed' by Sync Services, and there is no way that you can diagnose and correct the issue on a hit-or-miss basis.
The whole push-pull or put-get technology behind Sync Services is complex and at times mysterious, and made infinitely more complex when you cross platforms, despite the existence of widely touted 'standards' for data interchange.
I would start by hunting down the local Banner or Campus Pipeline expert, and asking that individual why the data is not 'synchronizable' in its current form.

SMS Server 6703 - SMS WSUS Synchronization Failed

Hi,
i am getting the following error on SCCM server,
"on 3/6/2011 12:00:00 PM component SMS_WSUS_SYNC_MANAGER on computer "ComputerName" reported: SMS WSUS Synchronization failed. Message: WSUS server not configured. Source: CWSyncMgr::DoSync. The operating system
reported error 2147500037: Unspecified error " with message ID 6703
i have SCCM server and WSUS server, it was working suddenly it started behaving as above.
i have check all SUP configuration, Proxy Settings, and all related.
why it is unable to sync with WSUS server, any idea ?\
Regards

Hi Owais,
I've found a few more posts with the same error you mentioned.
Problems Synchronizing System Center Configuration Manager Software Updates "SMS WSUS Synchronization Failed":
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/Systems_Management_Server/Q_24025939.html
which mentions: Found a useful tip that solved this problem for me in a SCCM/WSUS installation on the same server. It all comes down to removing the FQDN in the SUP role. Do this by removing the SUP role and reinstalling it. Uncheck the FQDN checkbox and
it works (at least it did in my case).
WSUS Error:
http://social.technet.microsoft.com/Forums/en-US/configmgrsum/thread/98c8b384-7e15-4143-820f-ff165ec7623e
WSUS SERVER not configured (Error 6703):
http://www.myitforum.com/forums/tm.aspx?high=&m=179760&mpage=1#179760
which mentions: I have check Automatic Detect Setting and I have filled proxy address and it works !!!!
Regards, Henk
My ConfigMgr blog: http://henkhoogendoorn.blogspot.com Follow me on Twitter: @henkhoogendoorn

Synchronization Failed. Error is Firefox service initialization failed.

Synchronization Failed. Error is Firefox service initialization failed.
Synchronization Failed. Error is Firefox service initialization failed.<br />
I have been having this issue for quite some time with Firefox. I am using the Nightly build (23.0a1) and have been using for more than 2 years. Synchronization was working fine till a few weeks ago. Synchronization of XMarks on Chrome Dev works fine and no problem. It's only with Firefox. Things I've tried but no success:
1) I deleted my profile off of xmarks and created a new one and tried syncing again. No success.<br />
2) deleted firefox, deleted the profile folder under AppData. Reinstalled everything fresh, and still no success.<br />
My log file shows the following... Not sure what to check. Anyone help me? Thanks!
<pre><nowiki>[2013-04-06 08:54:19] Failed to initialize ["lmsvc", "@mozilla.org/browser/livemark-service;2", (void 0)]: error is ({})
[2013-04-06 08:54:19] Host browser is FF14+, use private DB
[2013-04-06 08:54:19] Created nid_map table
[2013-04-06 08:55:12] Starting modal auth(true, undefined)
[2013-04-06 08:55:19] Could not load login iframe: {}
[2013-04-06 08:55:31] Finished modal auth with result 0
[2013-04-06 08:55:31] Entered OnTransitionPageShow()
[2013-04-06 08:55:31] ------ Xmarks/4.1.3 (/Places) starting status with sync.xmarks.com ------
[2013-04-06 08:55:31] Failed to initialize ["lmsvc", "@mozilla.org/browser/livemark-service;2", (void 0)]: error is ({})
[2013-04-06 08:55:31] Host browser is FF14+, use private DB
[2013-04-06 08:55:31] Entered Status...
[2013-04-06 08:55:31] >>> POST http://sync.xmarks.com/sync/bookmarks...
[2013-04-06 08:55:31] >>> Body is: {}
[2013-04-06 08:55:32] >>> Callback ({username:"dmadapps", status:0, toprev:1, isreset:true})
[2013-04-06 08:55:32] Success: Account verified.
[2013-04-06 08:55:32] gCanSyncPasswords is true
[2013-04-06 08:55:32] ------ Xmarks/4.1.3 (/Places) starting getProfileNames with login.xmarks.com ------
[2013-04-06 08:55:32] >>> POST http://login.xmarks.com/user/profiles...
[2013-04-06 08:55:32] >>> Body is: {"log":{"mid":"hf6uh7gn","serp":0,"ssEnabled":false,"sbsEnabled":true}}
[2013-04-06 08:55:32] >>> Callback ({status:0, profiles:{}})
[2013-04-06 08:55:32] Success: Operation successful
[2013-04-06 08:55:32] Calling wizard.advance()
[2013-04-06 08:55:40] ------ Xmarks/4.1.3 (/Places) starting initial sync with sync.xmarks.com ------
[2013-04-06 08:55:40] Failed to initialize ["lmsvc", "@mozilla.org/browser/livemark-service;2", (void 0)]: error is ({})
[2013-04-06 08:55:40] Host browser is FF14+, use private DB
[2013-04-06 08:55:40] Entered Status...
[2013-04-06 08:55:40] >>> POST http://sync.xmarks.com/sync/bookmarks...
[2013-04-06 08:55:40] >>> Body is: {}
[2013-04-06 08:55:41] >>> Callback ({username:"dmadapps", status:0, toprev:1, isreset:true})
[2013-04-06 08:55:41] Returned error: Firefox service initialization failed(6)
[2013-04-06 08:55:41] Will retry at Sat Apr 06 2013 09:10:44 GMT-0500 (Central Standard Time)</nowiki></pre>

Re Patrick's suggestion above, I was able to get Xmarks working again on both my Win 7 laptop and desktop today by uninstalling my Aurora browser completely and then installing the regular release version of Firefox, 20.0.1.
When I uninstalled Aurora, it asked me if I wanted to keep my customizations and personal data, and even though it meant a bit more restoration work later, I decided to try erasing all my Aurora settings and data and starting fresh. (But before doing so, I backed up all my bookmarks by exporting to an html file and my add-on settings via Firefox Sync.
After that, I installed and started with a clean slate version of regular Firefox, and proceeded to then reinstall my various add-ons and import my saved bookmarks from the html file. As soon as I re-installed Xmarks and re-logged into my Xmarks account, the automatic syncing process went fine and no more error messages or failures.
I had been using Aurora for months prior with Xmarks and never had any syncing problem until the first week of April. And at that point, the syncing function broke on both my laptop and desktop, which were both running the daily updated versions of Aurora. So I'm believing that something was changed in Aurora that caused this problem.

System synchronization failed--Protocol Error: Handheld file could not be opened. (4004)

I have reviewed Palm Support Page and the forums and recognize this is an old story but the solutions offered haven't worked for me. I have had my Tungsten 2E for over a year and an earlier version before that. It has been working well for me until I had a problem (out of the blue) with the HotSync. I reinstalled the Palm software after checking cables, etc. I was able to relink and get updated info from my handheld to the desktop but with a few blips in DocstoGo where I had to delete documents and add them back to the desktop and resync with the handheld. All the info is on the handheld but see the log below to see the message "System synchronization failed". A suggestion by other users is to delete the "PmTraceDatabase" to file C:\Program Files\Palm\N\Backup\PmTraceDatabase.PDB but I cannot find the named file on my desktop program files for Palm.
Does anyone have an explanation other than "live with it" since I believe I'm getting all my info synced?
HotSync operation started 02/14/08 09:26:07
OK Calendar
OK Contacts
OK Tasks
OK Memos
OK Expense
OK Note Pad
OK Documents To Go
OK Photos
   - Installed file: C:\Program Files\Palm\N\Install\DocsToGo.prc
   - Installed file: C:\Program Files\Palm\N\Install\GraphicsLibrary.prc
   - Installed file: C:\Program Files\Palm\N\Install\SheetToGo.prc
   - Installed file: C:\Program Files\Palm\N\Install\SS_P2P.prc
   - Installed file: C:\Program Files\Palm\N\Install\WordToGo.prc
   - Installed file: C:\Program Files\Palm\N\Install\WP_P2P.prc
   - Installed file: C:\Program Files\Palm\N\Install\WTGFontPackage.pdb
OK Install
   -- Backing up db psysLaunchDB to file C:\Program Files\Palm\N\Backup\psysLaunchDB.PDB
   -- Backing up db PmTraceDatabase to file C:\Program Files\Palm\N\Backup\PmTraceDatabase.PDB
System synchronization failed
Protocol Error: Handheld file could not be opened. (4004)
HotSync operation complete 02/14/08 09:26:47
Post relates to: Tungsten T2
This question was solved.
View Solution.

1. download and install FileZ from here
http://nosleepsoftware.sourceforge.net/index.php?page=filez
2. Launch FileZ and tap on view and edit files
3. Open the internal folder and tap pmtracedatabase and put a check mark next to it
4. Tap details
5. Tap on the "Attrs" tab
6. Uncheck the box next to backup
7. Click Save
8. Sync

Get message "Outlook Calendar Synchronization failed"

I hope someone can help. When I sync, the hotsync log gives me the following info. Everything syncs fine except the calendar won't sync. The message doesn't give me any info on why it won't sync (except maybe the words "Recovery sync" - not sure why it says that). I have had a Palm for years and never had this problem. It just started about a week ago. I have a Tungsten E and am using Windows XP. Thanks in advance to anyone who can help!
HotSync operation started 10/23/08 14:45:28
Outlook Calendar
   - Recovery Sync
Outlook Calendar synchronization failed
Outlook Contacts
   - Fast Sync
OK Outlook Contacts
Outlook Tasks
   - Fast Sync
OK Outlook Tasks
Outlook Notes
   - Fast Sync
OK Outlook Notes
Outlook Date Book
   - Do Nothing
OK Outlook Date Book
Outlook Address Book
   - Do Nothing
OK Outlook Address Book
Outlook To Do List
   - Do Nothing
OK Outlook To Do List
Outlook Memo Pad
   - Do Nothing
OK Outlook Memo Pad
Expense - sync configured to Do Nothing
OK Note Pad
VersaMail - Sync configured to Do Nothing
OK Documents To Go
   -- Backing up db Saved Preferences to file C:\Program Files\Palm\Linda\Backup\Saved_Preferences.PRC
OK System
HotSync operation complete 10/23/08 14:45:34
Post relates to: Tungsten E
This question was solved.
View Solution.

I was brave and just ran the Detect and Repair. I was very lucky and was never asked for the installation disk :-). It ran succesfully. I restarted my computer, just in case that would help, and ran another sync. I got the same error as you can see below. What other ideas do you (or anyone) have? I so appreciate the help and am confident I can get this resolved.
HotSync operation started 10/24/08 15:26:28
Outlook Calendar
   - Recovery Sync
Outlook Calendar synchronization failed
Outlook Contacts
   - Fast Sync
OK Outlook Contacts
Outlook Tasks
   - Fast Sync
OK Outlook Tasks
Outlook Notes
   - Fast Sync
OK Outlook Notes
Outlook Date Book
   - Do Nothing
OK Outlook Date Book
Outlook Address Book
   - Do Nothing
OK Outlook Address Book
Outlook To Do List
   - Do Nothing
OK Outlook To Do List
Outlook Memo Pad
   - Do Nothing
OK Outlook Memo Pad
Expense - sync configured to Do Nothing
OK Note Pad
VersaMail - Sync configured to Do Nothing
OK Documents To Go
   -- Backing up db Saved Preferences to file C:\Program Files\Palm\Linda\Backup\Saved_Preferences.PRC
OK System
HotSync operation complete 10/24/08 15:26:45
Post relates to: Tungsten E

UltraLiteJ Error[-857]: Synchronization failed due to an error on the server

Hi,
I have been trying to sync with a syncronization group, In SUP 2.2 and android.
But my android eclipse log cat shows...
Caused by: com.ianywhere.ultralitejni12.implementation.JniException: UltraLiteJ Error[-857]: Synchronization failed due to an error on the server: [-10225] Message: Failure occurred while executing user supplied code
and my SCC logs
shows this type error info,
{"_op":"C","level":5,"code":412,"eisCode":"9502","message":"java.sql.SQLException:SQL Anywhere Error -638: Right truncation of string data","component":"NFAApp_QASDB","entityKey":null,"operation":"synchronize","requestId":null,"timestamp":"2014-04-21 11:50:15.997","messageId":0,"_rc":0}
I have prepared my mbo for SQL store procedure. Please help me!
Thank you.

Hi Prashant,
Please mark this Discussion with a Correct Answer and Helpful Answer where appropriate. See http://scn.sap.com/community/support/blog/2013/04/03/how-to-close-a-discussion-and-why Even if you discovered the solution without any outside contributions, it helps others to understand what the solution turned out to be.
Regards, Mike
SAP Customer Experience Group - CEG

My Outlook/iCloud calendar invites to others appear to work on my end and sync with my PC and mobile, but when other people "accept" the invite, it will not populate/add in to their calendar. How can i fix this without turning off iCloud?

My Outlook/iCloud calendar invites to others appear to work on my end and sync with my PC and mobile, but when other people "accept" the invite, it will not populate/add in to their calendar. How can I fix this without turning off iCloud?
I am at a new office that uses Outlook (not Outlook Exchange) which does not sync with my mobile... I just got iCloud set up on my PC to sync my contacts, calendar, reminders, etc... The sync worked (not without flaws, but the other issues seem solvable... I think), so that i can now see all my appointments on both my phone and on my PC. The problem I am having is that iCloud moved all of my calendar items from Outlook into iCloud calendar and now when I send out meeting/calendar invites the recipients may accept them, but the meeting does not get added to their calendar. This is a huge problem and may mean that i need to turn off iCloud.
Does anyone know how to fix this?
Thanks!

I am replying to my own post here as I seem to have fixed the problem.
I do have some calendars that are shared. Some of those are shared with users who have time zone support turned on. So i activated time zone support on my iphone, then deleted my icloud subscription. I then signed in to icloud again and voila... problem solved.
It is a weird one as the other calendar views were always fine and when you opened an event that appeared in the wrong day (on list view), the correct date of the event was shown in the information...
one more bug in a complicated system I guess

IPhone 4 Fails to Start Sync Wifi, Smart Playlists Won't Sync Wifi or Wired, and Missing Artwork iTunes Screensaver

Hi all,
I recently deleted a few gigs worth of photos off my iPhone 4. Ever since I've been having trouble with a few things. All software is up to date. So far here are the things I've noticed that seem suspicious.
iPhone fails to start sync using wifi. It times out on Step 1 (starting sync) or Step 2 (backup). I've tried closing and reopening iTunes, restarting the MBP and iPhone, and deleting my iPhone backup. In some cases iTunes loses the connection to phone and won't come back. It syncs fine using a USB cable, but won't get past step 2 using wifi. I hate wires so I would prefer to do this over the air.
My smart playlists no longer sync. I've tried unchecking the boxes and selecting them again, but nothing. Duplicating an exisitng smart playlist and selecting it to sync seems to have worked for now, but I'm concerned about now being able to add my original playlist. Sounds like a larger issue to me.
My iTunes screensaver on my MBP no longer displays artwork. It says there is no artwork to display, but iTunes still has artwork in it.
I've read numerous threads about all these issues. I know there are many people out there having these problems. I just haven't found a good solution for any of them. Everything was working beautifully until I tried to clean up some old stuff on my phone. Apple is playing dumb according to the people that have contacted them.
I'm running:
OSX Lion 10.7.4
iTunes 10.6.3
iOS 5.1.1
Any help is greatly appreciated.
Thanks!

Just nudging this one back to the top in case anyone has some input.

Synchronization fails @ end of sync cycle sonyE w800 usb & bluetooth HELP!

Similar Messages

Maybe you are looking for