Synchronization from SLD to LMDB is working fine, but data is not written to Software == Product Instance

Dear Gurus,
Synchronization from SLD to LMDB is working fine, but data is not written to Software ==> Product Instance section tab. What could be the problem ? Normally it should gather automatically, but pushed me to select manually lots of component ???
Here is collecting is working fine !!!

Hello Kemal,
You have to ensure that your Technical System info is properly filled automatically.
In LMDB you first create its Product System on LMDB Start Screen ProductSystem tab, after that please assign its respective Technical System. You probably need to run the Verification Check in order to confirm that your Product System has all Product Instances according on Technical System's Software Component Versions.
Regards.
Luis Roel

Similar Messages

I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message: "there was a problem downloading the software for the i

I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?

look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once

HT1454 I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem

I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem
i am getting the same error with my rf transmitter that i use in my car

- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Did this start happening after an iOS update? Sometimes an iOS update will break compatibility.
Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

I have paid for creative cloud, photoshop works fine but it will not let me register lightroom

I have paid for creative cloud, photoshop works fine but it will not let me register Lightroom

Lightroom must be installed via the Creative Cloud Application.
It sounds like you have installed a Perpetual Licensed Version or a Trial Version of Lightroom. Uninstall any versions you have installed of Version 5 and then reinstall via the Creative Cloud App.

New AEBS installed, Vonage initially worked fine, but now is not.

I recently upgraded my home network, ditching the Linksys WRT54G router I had in favor of a new Airport Extreme Base Station. everything has been working fine, but all of a sudden I noticed that my Vonage adapter wasn't connected and was spitting out error 001.
The Vonage adapter is plugged into a 10/100 hub that's uplinked to one of the LAN ports on the AEBS (I know it's a waste, but nothing on that segment is gigabit capable…)
I launched into full troubleshooting mode, and determined that the cabling, hub and AEBS are all functioning perfectly. I also don't think that it could be a port forwarding issue, since several days passed between the time I swapped in the AEBS and the time when the Vonage adapter stopped working. In that time, several incoming and outgoing calls took place over the Vonage line and all was fine.
On a whim, I connected the Vonage adapter to a laptop and set it up with a static IP and attempted to configure port forwarding to it in the AEBS, but there was no change. Incidentally, with the static IP on the Vonage adapter, I was able to ping it from other computers on the network, but it still isn't able to download it's config from the outside world.
Vonage tech support has been willing to help, but unable to tell me anything useful thus far.
My question is, is anyone here using such a setup, and if so have you seen any issues like this? I'm really thinking that the adapter has given up the ghost, but I don't know.

To help you with your troubleshooting you should visit https://forums.vonage.com/
I had Vonage. Initially it worked then I had tremendous voice dropouts. After weeks of troubleshooting with Vonage (they rolled back firmware in their adapter) it worked... for about 6 months. Then the same problem reappeared. Troubleshooting with Vonage could not solve the issue this time. Since I had to have phone service, I cancelled Vonage and went to ITP. Unfortunately Vonage stuck me with cancellation fees even though their service would not work for me.

Can not connect the ipad 2 to wireless router. been working fine but some reason not working now being trying to solve this since 4pm today

Can anyone help can not get my ipad to connect to wireless today. has been working fine but all of a sudden will not connect to Router. I have a kindle and a mobile and both of these will connect to the router wireless but the ipad will not.
Been to my parents with the i pad and this will connect to their wireless router.
Can not think of anything else to try

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
 Cheers, Tom

HT2090 External iSight camera video feed working fine but mic is not working Mac Pro 2009 and Mountain Lion 10.8.4

Finally I decided to move forward and installed Mountain Lion 10.8.4 (with all the updates). Now I am facing a dilemma, my external iSight Camera is working fine regarding the video fee but the Mic is useless. I am using a Mac Pro 2009 and a Apple Cinema Display 30". I checked all the trends about iSight External devices but no one has a really specific solution for my problem. Firewire is not longer supported with Mountain Lion? By the way my iSight was working perfectly before. So I am wondering if something wrong happened with the OS and the support for this kind of device?   I reset the PRAM, the SMC, even I reinstalled the MAC OS X Mountain Lion (10.8.4) from scratch. So I am wondering if the problem is that ML is not longer supporting this device or what is the issue here.
Hope someone can help me with it!
Thanks
Jalcom

Jalcom wrote:... Firewire is not longer supported with Mountain Lion?...
Not true. External iSight works fine with my '09 Mac Pro and 10.8.4.
Jalcom wrote:... So I am wondering if something wrong happened ...
So it must have.
Jalcom wrote: ... help me with it!...
You have tried several good things, but there may be other suggestions from http://support.apple.com/kb/HT2090 that you have not yet considered. Be sure to check more than one Apple app in more than one user account to help you pinpoint the cause of your trouble. Then you will know what to fix.
In addition to the Apple troubleshooting, check your  > System Preferences... > Sound > Input to verify that your iSight's mic is selected, not muted, and that its volume setting is properly adjusted. You may need to check this again after restarting Mac or changing apps that use the mic.
Also, be certain that the apps you are testing are configured to use iSight's mic. Different apps select the mic in different ways. For example, QuickTime X allow selection among various microphone alternatives via one of its preferences as shown in the image below:
(I was using my Display microphone and did not have my external iSight connected when I made this image. Therefore, there is no iSight mic shown in my list of mic choices above. If your iSight's mic is properly connected, turned on, and recognized by your Mac, iSight will show in your QTX microphone preference choice list.)
If you are trying to use your iSight with a Flash based web site, also check your Mac's  > System Preferences... > Flash Player > Camera and Mic settings to verify that your Flash system preferences are not blocking your mic.
Some other apps may offer mic and or camera selection via their application menus. If you have trouble finding out how to select the iSight internal mic in other apps, check each apps' Help or post back the name of the app whose selector you cannot locate here so we can try to help.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early09) 2.93Ghz OSX 10.8.4 24" LED Cinema Display          External iSights

Siri was working fine but now is not.

Have had my phone about two weeks. Siri was working fine last night. This morning it is not Trying to use it to do an email - the microphone lights up and it appears as if it is recording - the little dots appear - but it does not write out what I said. I have tried disabling siri and turning off phone and then turning back on and nothing helps Very frustrating Please help me

Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)
Note: Nothing will be deleted.

WIFI is working fine but can't download or update software. Way too slow...

Please help. I have called Optus and my line is fine but the download is so slow stating 50 hours at time.
I can't even do a software update.

What is your current connection via speedtest.net
Make sure DNS is set to auto (settings - general - network)
If on wifi try Ethernet

When I run script from terminal it is working fine but it is not working from installer

Here is my script look like.
#! /bin/sh
defaults write com.apple.LaunchServices LSHandlers -array '{ LSHandlerContentType = "xxxx"; LSHandlerRoleAll = "com.xxx.xxx"; }';
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user;
please help

my app to be default for the that document type forcefully.
This is requirement of my client. I want same effect as of "clicking change all button by selecting default application" when we right click the file with that extension.
Please help if you know how to do it??

Why do I see: iTunes Help is unavailable because your computer isn't connected to the Internet. IE9 works fine but iTunes does not connect to the store.

I have tried 4 days to get iTunes 10.4 working on my Win7 x64 machine. I purchased a new iPhone4 and after syncing it the first time, I can't connect to the iTunes store.
When I try to run iTunes Help, I get this message "iTunes Help is unavailable because your computer isn’t connected to the Internet." However IE9 and Google Chrome run as always...... no connection problems.
I have already uninstalled IE9 x64 and iTunes 10.4 x64 and reinstalled but still the same. I followed all the instructions I could find about firewalls, ports, SSL etc.
Diagnostice gives me this information:
Secure link to iTunes Store failed -----
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
DELL Inc. Studio XPS 435T
iTunes 10.4.1.10
QuickTime 7.7
FairPlay 1.12.20
Apple Application Support 2.0.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.2 (333.2)
Gracenote SDK 1.9.1.485
Gracenote MusicID 1.9.1.102
Gracenote Submit 1.9.1.133
Gracenote DSP 1.9.1.43
iTunes Serial Number 00CCABA00E06CFD0
Current user is an administrator.
The current local date and time is 2011-09-08 09:53:57.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 4800 Series
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 226dfd82342c16c01da33b35a257182c
iPodService 10.4.1.10 (x64) is currently running.
iTunesHelper 10.4.1.10 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {DA96EEE0-050D-4F34-86AF-08A8499F6D4A}
Description: TAP-Win32 Adapter V9
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 08:00:00 1970
Lease Expires: Thu Jan 01 08:00:00 1970
DNS Servers:
Adapter Name: {B28305D7-F1F3-471E-8E55-AA9DC8E1058D}
Description: Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20)
IP Address: 10.0.1.8
Subnet Mask: 255.255.255.0
Default Gateway: 10.0.1.1
DHCP Enabled: Yes
DHCP Server: 10.0.1.1
Lease Obtained: Thu Sep 08 07:46:11 2011
Lease Expires: Fri Sep 09 07:46:11 2011
DNS Servers: 10.0.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-09-08 09:24:52.
　This means everything was successful except connecting to the firmware update server.. why can't I connect to iTunes store??????

Only fixed this in the last day or two . . .with this!
https://discussions.apple.com/thread/3588501?start=0&tstart=0

OUT Binding works fine, but INPUT Binding NOT WORKING at all

Did you test your Bindable property works in Flex so you can see it change in another component in Flex?
It doesn't look like you notify that xcText has been changed (and instead you modify the private variable behind it).
You can try changing your mychange function to set xcText (instead of manually setting myvalue) which should dispatch a change event.
Or you can try manually dispatch a change event (for the public property that has changed which is xcText in your case):
var event:Event = PropertyChangeEvent.createUpdateEvent(this, "xcText", null, xcText);
dispatch(event);
Regards
Matt

thank you Matt as you've been always there for help,
i know Adobe flex is not my job but i'm trying to add something to my experiences.
and its good to know the Xcelsius SDK since we are Xcelsius proffessionals
i fixed this issue, and i have only one more issue, is how to bind an Array to the Excel sheet.
i modifyed my example and also i modified the property sheet as well, please have a look and tell me what i'm missing
<?xml version="1.0" encoding="utf-8"?>
<mx:VBox xmlns:mx="http://www.adobe.com/2006/mxml" width="400" height="600">
     <mx:Script>
     <![CDATA[
            import mx.events.SliderEvent;
            import mx.controls.sliderClasses.Slider;
            import mx.binding.utils.*;
            import mx.events.PropertyChangeEvent;
          public var _myArray:Array = ["A1","A2","A3"];
private function sliderChange(event:SliderEvent):void {
                var currentSlider:Slider=Slider(event.currentTarget);
                this._myArray.push("A"+currentSlider.value.toString());
                this.value0 = this._myArray;
                notifyArrayDataInputChanged();
                  public function set value0(value:Array):void{
                   this._myArray = value;
                  [Bindable ("propertyChange")]
                  [Inspectable(type="Array")]
                  public function get value0():Array{
                   return this._myArray;
                  public function notifyArrayDataInputChanged():void{
                    var event:Event = PropertyChangeEvent.createUpdateEvent(this, "value0", null,value0);
                    this.dispatchEvent(event);
          ]]>
     </mx:Script>
     <mx:HSlider id="hslider" width="368" height="50%" change="sliderChange(event)"/>
     <mx:ComboBox dataProvider="" width="363"></mx:ComboBox>
</mx:VBox>

Batteries are working fine, but powercord will not charge them!

Hi i have 2 powerbooks, and one is not charging the batteries. I know for a fact that both batteries are fine because 1 PB charges them successfully, anyone got any idea what i could do to fix this? thx in advance.

Welcome to the Apple discussions.
There are 3 components to charging: Power adapter, battery, and logic board (and within that the dc-in card). If the adapters and batteries are good, then the dc-in card may have failed, which would be the next component in the chain. The dc-in card contains the jacks that the power adapter plugs into on the side of the Powerbook. You can see a picture of it at http://www.pbparts.com/shop//a15dlsdpsb.html
You can try the Apple hardware test, however, I don't recall it being particularly good at pointing out charging issues. It would be on the first OS X DVD that came with your system (should say 'AHT Vx.x' in small print on the DVD). Insert it, and reboot holding the option key down, follow directions and choose the extended test.

SBO mailer working fine but attachment is not coming

Dear All
We have configured the sbo mailer and mails are coming accordingly also, but attachments are missing in mails.
*** SAP Business One Client Log ***
WaitForSingleObject has finished with return value:0
SAP Business One Client return code:0
Distributing results
Unable to extract HTML report output to file C:\Windows\TEMP\Report.html Error code:-2028
Unable to extract PDF report output to file C:\Windows\TEMP\Report.pdf Error code:-2028
Unable to extract XML report output to file C:\Windows\TEMP\Report.xml Error code:-2028
SMTP Server: secure.emailsrvr.com:25
Sender Email: USER<[email protected]>
Sending email to [email protected]
Schedule processed
Please suggest the solution.
Regards
Ravi

Hi Ravi,
Please check Right of Attachment Folder for user.
If user is not having Right to access Attachment Folder then Attachment will not come in mail.
Please provide sufficient right to user for attachment folder then check.
Hope this helps
Regards::::
Atul Chakraborty

I can not get Firefox to recognize my CAC reader or use my CAC reader to access websites requiring CAC login. IE works fine but I do not want to switch back and forth. Any Help?

I have a CAC reader that Firefox does not recognize. It is installed correctly as have all the necessary certificates and IE can use the CAC reader seamlessly. I do not need the CAC to log-on to my computer, just to log-on to certain websites (mostly military).

For users that need to change between certificates of their CAC card, I found in Firefox 4.x you have to import the DOD pki files. To do this follow the instructions at the URL below inside Firefox (do all 4). After successfully completing the imports, restart Firefox and when you get to a DOD website like "DISA web-mail" it will ask you to pick the certificate you would like to use. For the email certificate look at the details of each certificate and find the one that has your email address attached to it. This one you much use for all email certificate authentication.
[http://dodpki.c3pki.chamb.disa.mil/rootca.html DOD PKI Certificates]
Best Regards, Dimitri

Synchronization from SLD to LMDB is working fine, but data is not written to Software == Product Instance

Similar Messages

Maybe you are looking for