Synchronization of EBOM with MBOM- ehp 5 question

1. We are currently using custom programs to download multi-level Engineering BoMs to Plant BoMs.
Will the ehp 5.0 functionality do this function as a part of EBOM - MBOM synchronization?
2. If MBOMs are modified specific to plants will these changes be highlighted back to EBOM ?
3. Can this EBOM - MBOM synchronization happen across systems? Our Engineering BoMs are in a different server?
Thanks
Ramesh

When it comes to FMS streams, there really is no way of
accurately syncronizing streams. Since you can't keep data in
buffer when pausing the stream, and you have to rebuffer any time
you seek, it's impossible.
The only way I've been able to sync flv's is using
progressive download. With progressive, you can sync streams, but
the accuracy is limited to the keyframe interval of the flv files.
For example, if you have 2 keyframes per second, you can achieve
sync with 1 second accuracy. with 4 keyframes per second, you can
get the offset down to 500ms. If you make every frame a keyframe
(makes for a huge file), you can get frame accurate sync.
The theory is to build a class that monitors the time and
buffer length properties of your two streams, pausing and/or
seeking when needed to maintain sync.

Similar Messages

Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

How to Synchronize cube measures with relational fact tables?

Dear all,
I built a simple analysis cube on Oracle 10g R2 using AWM.
The problem is when I change in the column associated with a base measure of my cube and then do cube or measure maintenance using the maintenance wizard of AWM, the measure value does not change and does not reflect the changes i made in the fact table.
Please tell me how to keep the cube measures on sync with the fact table columns
Thanks for helping

Hi there,
if you delete data in your fact table, i would asume that you have to delete the data in the cube, too. This is not done by "maintain cube".
According to your load strategy you have delelete the old data e.g. for the whole cube or just for a given time data (day/month).
You can use the dml command "clear" or just search in this forum for "clear cube".
Maybe this helps you to "synchronize cube".
If not, the questions would be:
Is new data loaded in the cube correctly?
Is updated data loaded in the cube correctly?
Is data in the cube, which is not present in the fact tables?
Good luck!
Ed

Synchronize SAP Roles with IDM Roles

Hi, i have a question concerning SAP integration in IDM.
Is it possible to import the Roles from SAP (named Activity groups) in IDM? And how does the "synchronize identity system roles with resource roles" function work?
Thanks in advance!
gojo

The job synchronizes FND Users with the Workflow directory service (plus any other systems you specify). PER is a special case, and will only be synchronized with the Workflow directory service if they are associated with a user - otherwise the records are not included. If they have corresponding HZ_PARTY records, then these may be synchronized, but should not really be used for notifications, since there is no login mechanism for the users to view the notification sent to a party record.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://thoughts.workflowfaq.com ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Synchronization RFSG with digitaizer

Hello!
How to synchronize work RFSG with work digitaizer? I can synchronize digitaizer by signals RFSG . But how synchronize RFSG by signals digitaizer?
Necessary on input TRIG (digitaizer 5114) send clock pulse, then this clock pulse to transfer on the PXI-tire to RFSG (5673) and start work RFSG on this clock pulse. Is it possible to do so? Tell me please about the scheme or algorithm or a ready solution. I can not understand how to transmit signals on the tire.
Thanks for the help.

Now I will explain that I do:
I use the block of DAQmx Connect Terminals VI. I send the signal of Reference Trig on a tire with digitizer(5114) on PFI0 of generator(5673). Then I want to use this signal as impulse of start of generator. I connect PFI0 and PFI1 a cable. In a project I specify the source of start of generator - PFI1. I start a project - all works. A generator is started as soon as on the entrance of PFI1 an impulse comes with PFI0. If an impulse does not act on the entrance of PFI1 - a generator is in the camp-on of signal of start.
Questions:
1. I want to use stepped trig for a management by the start of generator. Why herein and in other modes is a generator started and works without stops?Id est I give one impulse of start - a generator is started. I disconnect a cable from the entrance of PFI1 - but a generator continues to work. Why?In fact did he have to stop and pass to the camp-on of new impulse?I understood so, that at stepped trig a generator gets an impulse and passes to the camp-on of the second impulse.But goes out not so.
How I must do so that did a generator work with breaking or upcast in the initial state between the receivabless of impulses?I am not necessary that he generated constantly in the mode of stepped trig. Mode of single and burst does not suit for my task.

Synchronization RFSG with Digitizer

Hello!
How to synchronize work RFSG with work digitaizer? I can synchronize digitaizer by signals RFSG . But how synchronize RFSG by signals digitaizer?
Necessary on input TRIG (digitaizer 5114) send clock pulse, then this clock pulse to transfer on the PXI-tire to RFSG (5673) and start work RFSG on this clock pulse. Is it possible to do so? Tell me please about the scheme or algorithm or a ready solution. I can not understand how to transmit signals on the tire.
Thanks for the help.

Now I will explain that I do:
I use the block of DAQmx Connect Terminals VI. I send the signal of Reference Trig on a tire with digitizer(5114) on PFI0 of generator(5673). Then I want to use this signal as impulse of start of generator. I connect PFI0 and PFI1 a cable. In a project I specify the source of start of generator - PFI1. I start a project - all works. A generator is started as soon as on the entrance of PFI1 an impulse comes with PFI0. If an impulse does not act on the entrance of PFI1 - a generator is in the camp-on of signal of start.
Questions:
1. I want to use stepped trig for a management by the start of generator. Why herein and in other modes is a generator started and works without stops?Id est I give one impulse of start - a generator is started. I disconnect a cable from the entrance of PFI1 - but a generator continues to work. Why?In fact did he have to stop and pass to the camp-on of new impulse?I understood so, that at stepped trig a generator gets an impulse and passes to the camp-on of the second impulse.But goes out not so.
How I must do so that did a generator work with breaking or upcast in the initial state between the receivabless of impulses?I am not necessary that he generated constantly in the mode of stepped trig. Mode of single and burst does not suit for my task.

EBOM vs Mbom

Hi,
Can anyone tell me something about Ebom vs Mbom.
I want repliies with regard to manufacturing.
Thanks & Rgds,
- Pareena

hi pareena,
e bom means engineering BOM
mbom is manufacturing BOM
One of the functions of such software is the configuration of bills of materials or BOMs, taking the component parts list from engineering (eBOM) and manufacturing (mBOM) and updating it from as delivered through as maintained to as used.
when the production planning department creates the Production Bill of
Materials (PBOM) based on the Engineering Bill of Materials (EBOM). This
initiates a planned order, which in turn creates a material need. The planned
order is then transformed into a production order by the production controller
in the workshop. This is done in SAP in transactions MD04 and CO41. The
production order is then released with the transaction CO02. Here, the
system automatically creates a picking list. Next the production order
operation is confirmed by the production controller or supervisor in
transactions CO11N and CO15.
This is the critical point where it needs to be checked whether some materials
went on the goods movements with errors list (COGI list). These could be
materials that are consumed from stock or the end product itself. Mostly it
concerns only the materials that are consumed from stock. Errors occurring
in the consumed materials do not prevent the end product from being
completed but it will have two unwanted consequences: the stock balances
will become distorted and the costs will not be registered on the production
order correctly.
thanks
karthik
1) The recomended way of check-in file into SAP Content server is through CAD Desktop.
Goto CAD Desktop and check in the file using Check in Original.
If the Original file is not checked in SAP then the Problem is in File Check-in.
2) Create EBOM and save in SAP. If you are getting any problem. Then the Problem is with BOM Creation

Synchronize the audio with text

is there any way to do audio synchronize the audio with text in flash.

Is this question related to the one entitled :
how to find the timing in audio ?
If it is, please check out my answer there : http://forums.adobe.com/thread/900940?tstart=0

I have a PowerMac G4 running ProTools that no longer boots up. All I get is a file folder on the screen with a flashing question mark in it. Ran the Utility disk and all systems passed. Any ideas?

I have a PowerMac G4 running ProTools that no longer boots up. All I get is a file folder on the screen with a flashing question mark in it. Ran the Utility disk and all systems passed. Any ideas?

You need to use the computer's install disks to repair the hard drive or install a new OS.
(58033)

My MBP (mid 09)/ folder with a flashing question mark.

My MBP (mid 09) is showing a folder with a flashing question mark. I tried the usual things like PRAM Reset and booting with a external drive. I also changed the hard drive and could use it as a external drive on an other Mac - so this seems to work. Another drive could not be used too. The Apple Hardware Test does not work - my Superdrive is broken. Any ideas?

https://discussions.apple.com/docs/DOC-3046
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Users are unable to synchronize document libraries with OneDrive for Business

Hello,
We are having an issue with our users attempting to synchronize document libraries with OneDrive for Business. When a user tried to synchronize the document library either via the "SYNC" button on the document library page using IE or by
manually entering the document libraries path into the OneDrive for Business desktop app they receive the following error
"We can't connect to the specified SharePoint site". The users have the Edit permission to both the site and the document library. I have performed the following actions in attempt to get the synchronization to work.
1. Tested giving user the owner permission to the site and document library. same result.
2. Performed a repair on the users Office 2013 installation.
An interesting point to note is that I myself am able to synchronize the document libraries using both the "SYNC" button on the document library site and by entering the path manually in the desktop app. Difference between my account and the test
accounts is that I'm a site collection administrator and farm administrator. Can anyone shed some light onto this issue?

Hi Corey,
According to your description, my understanding is that the users cannot sync document libraries with OneDrive for Business.
I recommend to check the Permission Level to see if the Use Client Integration Features permission is selected.
If not, check this permission in the corresponding permission level which is granted to the users.
Please also check if the users have the right permission to sync the document library with OneDrive for Business.
More reference:
http://nheylen.wordpress.com/2014/05/15/sync-error-we-cant-connect-to-the-specified-sharepoint-site/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

At startup I get grey screen and a folder with a flashing question mark. How do I reset my MacBook Pro to the manufacture defaults?

At startup I get grey screen and a folder with a flashing question mark. How do I reset my MacBook Pro to the manufacture defaults?

Click here and follow the instructions. If the computer originally shipped with Mac OS X 10.6.8 or earlier, when you reach step 5, insert its original disk, restart with the C key held down, use the Disk Utility to erase the internal drive, and install a fresh OS.
(113954)

Hi...i bought the new iphone 4 and would like to ask how can i transfer all my data from my old iphone to the new one? If I will do "synchronization" through itunes with the old phone and the plug in the new one will that be the case?

Hi...i bought the new iphone 4 and would like to ask how can i transfer all my data from my old iphone to the new one? If I will do "synchronization" through itunes with the old phone and the plug in the new one will that be the case?

Follow the instructions in this article to transfer your info: iPhone: Transferring information from your current iPhone to a new iPhone

Synchronize two computers with one iPod

Is there a way to synchronize my iPod with 2 computers, so that my music us up-to-date on both?

You would have to install the music on both computers. If you sync your ipod with a second computer the ipod will ask if you want to use the ipod with this computer, if you say yes, it will remove all the songs and put them back on again using the library on the second computer. The ipod sync's one way, from computer to ipod. It will not sync ipod to computer. There are third party applications that will allow to do this. I have not used this application, so I can't say how well it works. Give it a try and let me know?
http://www.versiontracker.com/dyn/moreinfo/win/35090
It's called syncOtunes.

Upgraded to ios6 on my iphone 3gs and email is not displaying images. It has a blue box with a blue question mark inside

I just upgraded to ios 6 on my iphone 3gs and I noticed on a couple of incoming emails that the images and information are not being displayed. There is a blue square box with a blue question mark inside. I already tried to press the home key and power key to restart. The email still does not display correctly. I went on my laptop to retrieve that same email and I was able to see the graphics and information, so the problem is on the iphone. I received two emails like this, so I'm missing all the important information. I also tried to retrieve my email through the internet browser and I still have the same problem. Any suggestions? Thanks!

I forgot to mention that I have an Ipad 2 also and I can view the email information on there also. I received an email from Party city and it said to click here to print out the coupon. So I click the coupon and there is the little blue box with the question mark. This is the first time I've seen this happen, as I have printed out the coupons before. Maybe it has to do with the IOS6 update, because this just started to happen right after the update.

Synchronization of EBOM with MBOM- ehp 5 question

Similar Messages

Maybe you are looking for