Synchronization of uploaded rhythmic audio structure with Logic-created beat?

That´s it.
I wanna equalize an uploaded rhythmic audio structure with an Logic-created beat. F.e., the audio sound could be the sound of a watch having 60bpm normally, and the Logic-beat has 80bpm. How do I get both to the same bpm? Thx for any useful answer.

The MIDI data is in your Boss machine. There is no MIDI in Logic to pull audio from your drum machine. Once Logic is slaved you have three options. 1. Realtime record two tracks of audio into Logic from your drum machine. 2. If your drum machine can actually generate musical parts on independant tracks like my old Boss DR-5, then you can record separate tracks into Logic one at a time by muting all but one track for each recording. 3. You could record MIDI from your DR880 into Logic. This is the best option since you can record all channels in one pass and then edit parts in the matrix editor, where you can monitor individual notes or requantize as you see fit. Also, once the MIDI recording is complete, you no longer have to sync Logic to your drum machine. Logic will play the recorded MIDI data back through your drum machine. If you create new tracks in Logic like vocals or adding a new instrument, then you may wish to change part of the DR880 beat to complement the new recordings. You won't have this option unless you record MIDI first, edit all tracks together in Logic, and then bounce to audio after all editing is complete. When recording MIDI from your DR880, make sure you set up new external MIDI tracks in Logic. Make sure to create one track per MIDI channel coming from your BOSS.
Record arm the new MIDI tracks in Logic and then you are ready to do your MIDI recording of all tracks in one pass.

Similar Messages

Can anybody explain me how to sample and play audio files with logic's EXS2

can anybody explain me how to sample and play audio files with logic's EXS24 Sampler???
i cant find a way to upload and manage my own audio content on this sampler...

i uderstand , thanx...
i managed to open an audio file and placed it in the sampler,i can play t sample in the little keyboard in the zones section, howver i dont know how to play it with my controller... the sample shows in C1 on logic's keyboard but if i play C1 on my controller nothing happens... how can i fix this?
Also, i noticed the sample plays from beginning to end once i click on it, how do i do to just make it last until i release the key? like a logic sound??? (in case i want to play a small portion of the sample only)
Thanx

Setting up an audio interface with logic 9

hey im still pretty new to this. i have a powerbook G4 with logic pro 9. i just got a steinberg CI1 usb audio interface which i was told would work with logic. (http://www.steinberg.net/en/products/hardware/ci1/ci1_start.html) im recording vocals and im having trouble with logic picking up any audio. ive installed the drivers and my mac has no problem discovering the interface. i went into logic and it intilized the core audio, and then i went to "prefrences" and set the audio input/output to the interface. i can hear myself with the headphones i connect to the interface and i can also hear the instrumental music coming from logic. The problem is logic wont pick up any of my vocals. I set the track to record enable and i still have nothing. Any help? Thanks!
oh and i tried it with garageband and it worked fine, so im pretty sure it has to do something with the setting on logic. any help would be appreciated!

Hey bud i was able to sort it quite easily in the end!
Ensure u have latest drivers installed!
Restart your mac! Ensure interface is plugged in
Load logic!
Click the + to add a new track:- select audio instrument!
Enable record and monitoring! Choose the channel you want to record from!
You may have to select your interface as your output if monitors are being used through the interface!
Hey presto!

Thunderbolt audio interface with Logic Pro?

Are we to get a new thunderbolt interface with Logic Pro? Avid released their stuff today!

re: Thunderbolt
bill borez wrote:
They'll be a whole load of them in the not too distant future.
hehehehe
http://www.youtube.com/watch?v=kTTSsB92L_s
at about :48

Using Multiple Audio Interfaces With Logic (Edirol FA-101)

I just bought tiger so that i could aggregate my two edirol fa-101's and they still dont work. They cut out and the sync buttons flash. Its as if the computer ant deal with so much information. I stop all large processes on my g5 dual 1.8 and try again. They cut out whether im in Logic or not. One works ok but still cuts out sometimes, adding another has made the problem twice as bad. Any advice please. Ive talked to edirol and they have no idea what to do... Thanks, Ben

According to their web page, the FA-101 does accept SPDIF. They should be wired together with one unit should be set up as a master and the other as a slave. You units should sync up then.
As they are right now, the two units are competing to sync with Logic, causing the sound to pop and cut out.
jord

Help setting up my audio interface with logic pro x

Hi everyone,
I am a newbie with regards to home recording and using Logic Pro X and I need some help and advice about setting up my home recording set up for the first time. I want to connect my synthesizer Korg Triton Extreme to my Audio Interface Steinberg UR22 to my Apple Imac computer.
What I would like is if I can create backing tracks or use pre-set sounds or drum patterns from my Korg Triton Extreme synthesizer and then transfer them onto Logic Pro X to help me compose songs.
How should I go about doing this? And what settings should be applied to Logic Pro X so that I can hear the songs as they are being played and recorded?
So far I have connected my synthesizer's two outputs to the two inputs on my Steinberg UR22 Audio Interface. I have also connected the USB point on the audio interface to my Apple Imac computer. But when I have tried to add a drum track from the Korg Triton Extreme synthesizer I cannot seem to add any of the drum sounds. Nothing appears to be recorded despite me trying several times. I cannot hear any sound coming from the audio interface either despite having a pair of headphones plugged into it.
I would also like to find a way to synchronise the drum tracks I want to record from my Korg Triton Extreme synthesizer to Logic Pro X. So that when I click on the record button on Logic Pro X the synthesizer track automatically starts playing and recording on Logic Pro X. Whats the best way to do this? And will I need a Midi cable for any of the things I want to do?
Many thanks,
James.

Hi James
I just got myself a macbook pro and logic pro X, and I also have a Triton Extreme and the UR22. So I know what the learning curve can be like - it's been a long time since I've used a sequencer in a computer.
I assume you are aware of the difference between audio and midi? With your current setup, all you can do is play your Triton and record the sounds as audio loops - you should be able to hear the Triton through headphones plugged into the UR22, and (assuming you have installed the UR22 driver) you can also hear the Triton through your computer speakers (or headphone output) once you tell Logic there is sound coming in from the UR22.
If you want to be able to play the sounds in logic pro, or transfer drum patterns (which are in midi format), you will definitely need midi cables (you may be able to use midi by connecting the Triton's USB out to your computer, but having not tried that, I don't know if it will work - it does on more recent synths)
paul

A Noob in need of help with audio decice with logic

Hi all,
Ive just got logic 8 and ive got an alesis IO26 firwire audio interface, and im having trouble getting it to work! Can n e one post a step by step guide to getting it up and running for recording? Thanks. Im using an Imac with OSX 5.1 leopard. Thanks guys!

1st make sure you have the latest driver from Alesis. the latest one, which supports Leopard, was just released last month.
then go to http://www.macprovideo.com and get the Logic 101 tutorial. you will be up and running in no time

Audio Interfaces With Logic Express.

Hi,
I'm new to the Mac world, I've just bought one of the 20" iMac's with duo processors. I want to run Logic Express and eventually move up to Logic.
I come from PC back ground, I run I use a Behringer UB1202FX mixer, Tannoy Reveal Passive Monitors, Oxygen 8 MIDI keyboard and Cambridge Audio A1 MK3 integrated amp. plugged into a 24 bit /96khz soundcard.
I know I've to get a external audio interface to get 24 bit sound and to allow me to plug in my external equipment. Does anyone have recommendations? I looking for something around £300 maximum (not sure what that is in $)
Thanks.
Pentium 4 Windows XP Dell

Hi,
you don't say how many ins you'll need.
There's a good handfull out there for you too choose from,
USB or Firewire? Firewire will be my bet.
try those to see if tou like 'em, M-Audio's: Firewire 410
http://www.m-audio.com/products/en_us/FireWire410-main.html
more ins: firewire 1814 -
http://www.m-audio.com/products/en_us/FireWire1814-focus.html
try to see the prices here in pounds:
http://www.dolphinmusic.co.uk/?categoryid=aa5045ac8dbda1110af5783d9c9b8f89&order=&page=shop%2Fmanufacturer-stock&manufa cturerid=54
Anyway, there are others, but for the price you're asking, it's a good starting point and you get a good product!
regards,
Jorge

How to set up an audio interface with logic express

i just got a deck board tascam us-1641, downloaded the driver, plugged in my keyboard but nothing is happening. What am I missing or not doing?

You probably have to set up Logic to use your audio interface.
You'll find these settings under the Logic menu > Preferences > Audio. Then you can select the preferred audio interface.

Audio Interface with Logic-best bet?

I've been using a Firepod for the last 2 years and it's fine but today a friend of mine brought over a MOTU MK3 Traveller and it sounds so much better. He got it recently but has to sell it and offered it to me for a good deal. It's got me thinking that maybe I should have a look at some other stuff before committing so now I'm looking at the Duet or maybe even an Ensemble. The Firepod was nice because of all the inputs but I could live with only two(Duet) but would much prefer four mic inputs(Ensemble).
The Ensemble might be out of my budget at the moment so do I buy the MOTU MK3 Traveller(four inputs) off my friend or get the Duet?
Any Advice?

I have and love the Apogee Duet, and it has served me well so far at home and doing field recordings with my Macbook Pro.
For instance, last week I recorded a sitar concert, and brought a small setup - a matched set of Rode NT1As, an A.R.T. MPA GOLD two channel tube pre, and my Macbook Pro/Duet combo. I barely had any time to get situated, and what's more, I got pulled into setting levels for the PA, which was kind of dicey, since the sitar master opted to forgo doing a soundcheck before the concert, so I had to wing it.
Before I scooted over to the board for the PA, I took an educated guess at some levels for the Duet and MPA GOLD. The Duet has such a low noise floor and such ample headroom that my educated guess was more than good enough. What's more, it is quite easy to use, so it took no time at all to dial in the gain setting I wanted, using the Maestro software that comes with it. The recording sounds gorgeous, considering the rushed circumstances of its setup. I would describe the quality of the Duet's sound as "crystalline."
That said, if you are looking for more channels in but are not ready to spend Ensemble money, we have a Mackie Onyx 1620 at work (or 1640 - I don't remember) that I use all the time for tracking all kinds of performers. Its pres are quiet and transparent, although they only provide so much gain. We run 4 channels of outboard pres through compressors and into four of the Onyx's pres. 8 XLR ins, 8 more ins arrayed in stereo pairs, all 16 channels are piped via Firewire 400 into Logic, and the two output channels back out. Plus, its a great mixer for conventional mixing purposes - good eq, simple, sturdy design. Not bad for under $1,000. I just saw they have a newer version out - the Onyx 1620i, but I don't know what that "i" is designating as far as improvements. They make Onyx mixers in several models, each with a different number of channels, so maybe one of these would work for you...
I hope this was helpful!

21.5" Imac with 2.8ghz Quad-Core i7, 16gb ram and 2 TB hd to use for professional audio recording with Logic 9?

Does anyone have any experience with this exact conifguration? I would like to purchase this and use it for 5-10 years of solid audio production. Any shortcomings?

Ok. So I now I found a local seller who is selling a 2008 Mac Pro. Does anyone want to advice which would be the smarter route to go. This is used, but they are guaranteeing that it is in incredible shape. It's a bit old:
This is a gently used, mechanically sound and tech tested Apple Mac Pro. I am only selling due to our business upgrading, otherwise I love this machine, and would not be selling it. It comes fully loaded (both hardware and software), and is ready for the most robust tasks.
Included with the Mac Pro is 2 brand-new sealed 20.5" Lenovo LCD monitors, Apple Magic Mouse and Apple Wireless Keyboard. Currently, the Mac Pro is setup for dual monitors on the 512mb NVIDIA GeForce 8800 GT video card.
The memory on the Mac Pro has been upgraded to 16GB and an Apple OEM 256 GB Toshiba Solid State Drive (SSD) has been added to increase boot up speeds to mere seconds. The SSD can be configured to run either OS X Lion or Snow Leopard and will also house all of the applications. The combination of 16GB RAM and the applications residing on the SSD enables this machine to perform at amazing speeds. It can seamlessly render video and run other ram intensive applications with ease, making this a perfect addition to anyone's video editing studio.
In addition to the 256 SSD, the Mac Pro has a total of 4 TB of storage space with two separate 2 TB hard drives for storing massive amounts of data. (2 open bays if you wish to add more storage).
LOADED SOFTWARE:
MS Office 2011 (Word, Excel, PowerPoint, Outlook, Communicator
Adobe CS5 Mastersuite (Photoshop, Encore, Flash, Dreamweaver, Illustrator, FireWorks, Catalyst, Contribute, After Effects, Bridge, and much more!)
Final Cut Pro 7
iLife 2011
Aperture 3
Adobe Acrobat X (PDF Editor)
All applications have been freshly reinstalled with their appropriate activation keys. The machine comes ready to go with no administrative password for either operating system (Lion or Snow Leopard).
Thanks for looking and if you have any questions feel free to ask! This Mac Pro comes with a 30 day warranty against DOA. Buy with confidence.
If you like the machine, I have a little room to work on the price if you do not want the SSD. Otherwise price is FIRM. This machine is a powerhouse!

Map structure with logic

Hi there,
I am currently facing the issue to map fields depending on on other fields values:
The problem is as follows:
there are two sources for values,
if the value can be found in source1 and source2 no value is mapped
if the value can be found in s1 but not in s2 the value should be mapped with attribute "delete"
if the value can not be found in s1 but in s2 the value should be mapped with the attribute "create"
At the Moment I have no idear which approach to try, I thought about using a scripting functoid but I am not shure if it is possible to have multiple in and output nodes? I don`t have any experience with xslt but maybe it is neccesary to learn it for this?
thanks in advance for your ideas!
<source1>
<value>111</value>
<value>112</value>
<value>113</value>
</source1>
<source2>
<value>111</value>
<value>124</value>
<value>125</value>
<value>126</value>
</source2>
<result>
<value atrribute="delete">112</value>
<value attribute="delete">113</value>
<value attribute="create">124</value>
<value attribute="create">125</value>
<value attribute="create">126</value>
</result>

If your input XML looks like this:
<Root>
<source1>
<value>111</value>
<value>112</value>
<value>113</value>
</source1>
<source2>
<value>111</value>
<value>124</value>
<value>125</value>
<value>126</value>
</source2>
</Root>
And you apply the following XSLT:
<?xml version="1.0" encoding="utf-16"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt" xmlns:var="http://schemas.microsoft.com/BizTalk/2003/var" exclude-result-prefixes="msxsl xsl var" version="1.0">
<xsl:output omit-xml-declaration="yes" method="xml" version="1.0" />
<xsl:template match="Root">
<result>
<xsl:for-each select="source1/value">
<xsl:variable name="myValue" select="." />
<xsl:if test="(count(//value[text() = $myValue]) = 1)">
<value attribute="delete">
<xsl:value-of select="." />
</value>
</xsl:if>
</xsl:for-each>
<xsl:for-each select="source2/value">
<xsl:variable name="myValue" select="." />
<xsl:if test="(count(//value[text() = $myValue]) = 1)">
<value attribute="create">
<xsl:value-of select="." />
</value>
</xsl:if>
</xsl:for-each>
</result>
</xsl:template>
</xsl:stylesheet>
You will get the following output:
<result>
<value attribute="delete">112</value>
<value attribute="delete">113</value>
<value attribute="create">124</value>
<value attribute="create">125</value>
<value attribute="create">126</value>
</result>
Morten la Cour

Recording 2 Audio Tracks with Auto -Create

Hi all
I'm recording some audio and working with the auto create and auto mute in cycle record under Song Settings. I want to record a di bass and it's treated partner(through a Line 6 pod) and 01v mixer. Can the auto create and mute be set up to deal with multiple passes of both audio tracks coming in? Doesn't seeem happy about it!! Thanks
G4,1 ghz dual.1gb ram Mac OS X (10.4.7) logic 7.1.1,korg N1,unitor 8,01v

Use a stereo track with the DI on one side and Pod on the other. You can split them up later if you wish.

Audio hardware interface to use with Logic Studio 8 and Pro Tools M-Powered

I want to get Logic Studio and Pro Tools M-Powered. I do film sound design and music as a hobby. I plan to compose music with Logic and edit film audio with Pro Tools.
Here is my main concern:
I want to get ONE firewire audio interface that will work with both programs (Logic Studio and Pro Tools). I need one that has multiple outputs because I will be mixing in surround sound (mostly the film audio). Are there any suggestions? Inputs on what people like, don't like, work well with both? What I should completely avoid? I figured Pro Tools M-Powered (as opposed to LE, HD) would be better for me simply because of price and possibly using the m-audio interface with Logic too.
Let the advice begin please. I will be happy to answer any questions you have for me that would help you provide better advice for me.
Thank you in advance
TTW13

Yes, Logic Studio is surround sound capable, but unfortunately a lot of places that I would potentially like to be working at, that do audio post, that I've seen, require a knowledge of Pro Tools. I know it's not the best but it's the industry standard and it's what many companies use so I need to learn it (basically). I don't want to limit myself to stereo outs on the audio interface on PT. Maybe I should to keep my budget down though??? I guess now I'm looking at PT LE and the 003 family, this one in particular
http://www.digidesign.com/index.cfm?langid=100&navid=126&itemid=5028
I dunno, by the time it's "technically" compatible with Leopard I might be able to afford it.
Anyone currently using Pro Tools LE with Leopard right now? For some people it apparently works???

Can I use a VS-700C control surface with Logic Pro?

Hi,
Does anybody know if I can use a Roland VS-700C control surface and/or VS-700R audio interface with Logic Pro?
Cheers,
Craig

If it supports the Makie protocol, it might work... but I wouldn't purchase one on that basis without trying it first.

Synchronization of uploaded rhythmic audio structure with Logic-created beat?

Similar Messages

Maybe you are looking for