Synchronization problem prevents blue print import into JDeveloper

JDeveloper BPEL Model Chooser thinks "there are pending changes proposed by IT", but back in Business Process Architect there are no improvement proposals, nor tasks of system in the database. So far as I recall, I made no changes on the IT side.
BPELExport, line 10: There are pending changes proposed by IT which have not been accepted or rejected by Business user. Please have the Business user take appropriate action. (BPELExport#10)

Hi,
AFAIK there are two possibilies that cause this issue:
a) You tried to save IT-Changes from JDeveloper back into the BPA Repository and for some reason this step couldn't be finished.
b) You copied and pasted a model within BArchitect (as described in the QuickstartGuide - chapter 8).
In 10.1.3.4 when IT updates a model, a copy in the same directory gets created (with a "(1)" at the end of the name) to not mess up the original one. When a model opens and it finds another model in the group with the same GUID it assumes IT has done this. In that case delete the copy and you should be able to progress. If you can't please create a new empty model and copy paste the content (Ctrl-A, Ctrl-C, Ctrl-V) from the original to the new one. After this you should be able to create a new BPEL-project from blueprint and so on. I hope you didn't put too much effort on the technical side (JDev).
Best regards,
Danilo

Similar Messages

I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

When clips won't play without rendering in the Timeline, it usually means that the clip's specs don't match the Sequence settings.
A .mov file could be made from any number of codecs; the QuickTime Movie designation is merely a container for video files of all kinds. Since FCE only works with the QuickTime DV codec and the Apple Intermediate Codec (AIC) natively, if your mov files aren't one of those two, you need to convert them PRIOR to importing into your FCE project.
-DH

How do I correct the darkest blacks from becoming bright blue when imported into LR?

When shooting in RAW with a Sony RX100M3 the darkest blacks become bright blue when imported into LR. Any ideas when this happens and how I can fix it?

If this is occurring in the develop module the you have the shadow warning turned on and this shows as blue, just like the highlights show as red. You can turn this off by clicking the triangle in the upper left hand corner of the histogram.

Blue Print View in JDeveloper 10.1.3.4

Hi,
whenever I open files in BPEL files in JDeveloper at the moment, I get an extra button top-left called "Blue Print View" and a blank pane below it. I don't know what it does or why it's there, and can't find any documentation on it, or settings/preferences related to it. If I click anything else on that toolbar, the "Blue Print View" button disappears and I see the BPEL view that I'm expecting. This started happening recently, and coincided with me starting to see many problems when I try to close file tabs that I've got open, e.g. I click on the [X] to close a tab and it just won't go away!
I remember attempting to add a BAM Server/BPA Server/Rules Engine in the Connections Navigator (I was just playing, I don't actually have one to connect to), and I wonder if these problems originated at about the same time.
Does anyone know what this "Blue Print View" is all about, and how I can get rid of it?
I am using JDeveloper Studio Edition Version 10.1.3.4.0.4270 under Windows XP SP2.
Cheers,
Paul

Hi Brent,
I don't know how to install exceptions manually. However why don't you try to install a different extension (e.g. junit integration), to see if the problem persists (is it a general problem with your jdeveloper installation / none of the extensions work??). Also try to start up the jdeveloper from the command prompt - are there any exceptions (e.g. IOException) logged on the console upon startup?
The problem might be related to file permissions, jdk version, or 64-bit win7 os (jdeveloper 10g not certified).
Edited by: user647567 on Jun 25, 2011 12:41 PM

My old version of outlook express has several problems, will these be imported into a new thunderbird account

My old version of Outlook Express has gained several problems. It is time to change, will these errors be imported into a new Thunderbird account. I'm hoping that all would be well based on the belief that the two programmes are totally different.

You're not saying what problems you have with OE, so how should anyone guess?
There is no such thing as a 'Thunderbird account'. You do have an account with your email provider. You can use OE or Thunderbird to access that account.
But Thunderbird is not your email provider.

Workflow problem - keeping keywords while importing into Lightroom

I am working tethered to a laptop, and need to put in keywords for each product I shoot. I do this in LIghtroom, and drag those images to an external drive. Then, I take the hard drive to my office desktop Powermac, and import these into my LIghtroom database on that computer. When I do so, I check "none" for metadata information to apply, and when my images import, the keywords are gone. What am I doing wrong? I spent hours entering all that data.
Many thanks for any help or better workflow in general.
Lynne

The keywords are stores in the catalog, not in the picture - specially not in the raw file. LR never touches the raw files which is one of the main concepts of LR. Everything you do is stored in the catalog and/or in a sidecar xmp file, depending on your settings.
Obviously, if you simply copy/move the raw files non of all your settings and keywords is coming along. You could copy/move the raw file and the xmp sidecar file - that will carry your settings. If you export, you export a picture with all your changes made to the picture and with keyword in the metadata. However, you can not export in any raw file format. If you need raw on the other machine you can as well look into dng: converting to dng upon import and exporting to dng. The dng file does not use an xmp sidecar file, it has all the metadata stored in itself.
HTH
Franz

Problem with iPhoto pictures imported into Aperture 3

I recently put together few thousand pictures I had in iPhoto with several other thousands I had on Aperture 3.
I just realized the pictures I imported from iPhoto have all a litle exclamation mark with an arrow just like this:
When I try to export any of these images, or create a book, or email them it gives me an error message just like this:
When I imported the pictures, I drag them into Aperture. Not sure what happened and why the original files were not imported as well.
Can anyone help? Thx!

This looks like your iPhoto Library may have been a referenced library - check, if the iPhoto preferences "Advanced" settings are set to "Importing: Copy items into the iPhoto Library". If this option has been unchecked, when you imported to iPhoto, your iPhoto Library references the images and does not include them. And if you import a referenced library to Aperture these images also will be referenced in Aperture.
How exactly did you import from iPhoto to aperture, and what are your iPhoto and Aperture versions? Where are the libraries located that you importet? On an external volume?
Try, if the links become active, when you connect the external volume again.
Regards
Lèonie

Problem with m2t clip import into AE CS3

I have footage that I need to use AE to stabilize, but something odd is happening on import. The footage is 24p/1080 HDV shot on a Canon XH-A1s, and I'm importing the native .m2t files into AE CS3. I have the AE project settings on 24 fps, but when I import the m2t clips, they shift to 44.96 fps for no apparent reason.
If I open up the Interpret Footage box for the imported clip, it's clear that AE *thinks* the footage is 44.96 fps. When I then change the frame rate to 24 fps in the Interpret Footage box, it still doesn't get it quite right (e.g., a shot that is exactly 15s00f long now reads as 14s22f).
I tried using 23.976 fps as the footage intepretation, but it didn't make a difference...not that I thought it would.
Anyone have any ideas? Thanks in advance,
Stu

You need to convert that m2t footage to a different codec. AE 9 can't handle that kind of footage.
Since I'm a Mac guy, I like to go with Quicktime's PNG codec: it's lossless.

BPEL process blue print not importable by JDeveloper

Hi
I have a troublesome BPEL process that is not being imported into JDeveloper. Others work fine and the closed loop process change management works great.
However, this particular one is annoying.
On selecting the process, JDeveloper downloads the required information. I click 'Next' and/or 'Finish' and it starts 'Creating Project'. That's all it does. Eventually it finishes and nothing has been added to the project.
Has anyone seen this before, or know where a log may be of the process to debug it?
Any help most appreciated.
I am using 10.1.3.4 BPA Suite and 10.1.3.3 JDev
Cheers
Chris

Aha
I get the following exception occuring.
## download =C:\DOCUME~1\cbell\LOCALS~1\Temp\bpaserver_download20348.zip
## download =C:\DOCUME~1\cbell\LOCALS~1\Temp\bpaserver_download20349.zip
java.io.IOException
at oracle.ide.net.URLFileSystem.copy(URLFileSystem.java:297)
at oracle.tip.tools.ide.common.bpeldesigner.util.Helper.copyFiles(Helper.java:130)
at oracle.tip.tools.ide.pm.projectwizard.JDevProjectBuilder.createExistingBluePrintProject(JDevProjectBuilder.java:144)
at oracle.tip.tools.ide.pm.projectwizard.JDevProjectBuilder.createIDEProject(JDevProjectBuilder.java:71)
at oracle.tip.tools.ide.pm.projectwizard.BPELProjectWizard.handleFinish(BPELProjectWizard.java:57)
at oracle.tip.tools.ide.common.graph.wizard.JWizard$1.run(JWizard.java:400)
at java.lang.Thread.run(Thread.java:595)
Think I may raise an SR.
Cheers
Chris

Problem with saving TIFF from PDF in Photoshop and importing into Corel

I work at a publishing company, and some of our designers use CorelDraw X14. We receive most of our advertising material in PDF format, which I then have to convert to TIFF in Photoshop (I use CS4). Most of the time this works fine, but lately, the TIFF files appear ragged and very low resolution (especially the text) once they are imported into Corel. When I re-open the TIFF files in Photoshop they seem fine, as well as viewing them with a picture manager program. Does anyone have any idea why this happens, and if the problem lies with the may I save the TIFF files or the way they are imported into Corel? TIFF files created from Corel don't have the same problem.

I concur with Bart - they are using the preview because someoen ticked a wrong checkbox or enabled a fast preview mode... Should print and export without issues, though.
Mylenium

I have Iphoto '09, version 8.1.2 (424). I am having an identical problem. All my pictures are imported into Iphoto when I downloaded them from my camera. Until recently, I thought that the pictures were actually saved in the library. Since I need to cr

I have Iphoto '09, version 8.1.2 (424). I am having an identical problem. All my pictures are imported into Iphoto when I downloaded them from my camera. Until recently, I thought that the pictures were actually saved in the library. Since I need to crop my pictures for the web, and Iphoto doesn't do that, I purchased Photoshop Elements to do that. To my surprise, when I try to get a picture from Iphoto to Photoshop, it can't be done. That was when I realized, after wasting a lot of time, that the photos are not in the Iphoto library.
I started naming the pictures on Iphoto so I had a recognizable file name to open on Photoshop. Couldn't find it. I looked in the Backup folder and the Transfer software folder (I have a Nikon camera), and the names I entered in the Iphoto display, could not be found.
When I am trying to upload a photo to the web, I get the Finder folder showing with an active folder called "Photos" under "Media", which only displays Iphoto and PhotoBooth. This is a folder name that I cannot find in my HD anywhere when I look for it. If I edit a picture with Photoshop, I am not going to save it back to Iphoto (not sure whether it will work properly). How do I get my folder of edited photos to show when I want to upload a picture to the web?
Where (the name of the folder) do I find the pictures I see displayed on the Iphoto library, including any name changes, keywords added, and so on?

See my response to your other post.

How can I import my Blu-Ray DVDs into iTunes?

Is ther an easy process in which I can import my store bought copy protected Blu-Ray DVDs into iTunes so I can watch them on my iPad or Apple TV?

It is illegal to do this.
MPAA Says Making Even "One Copy" of a DVD is Illegal
Judge rules that DVD copying software is illegal | Technology ...
Judge Rules DVD-Copying Software Is Illegal | Threat Level | Wired ...
Burning Backup DVDs Ruled Illegal - Feb. 24, 2004
DailyTech - U.S. Court Rules Consumers Never Have the Right to ...
MPAA: Making a Single Backup Copy of a DVD is Illegal | Maximum ...

HT200169 Having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Sug

Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?

Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
Ian Turner wrote:
Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
Ian

How do you copy, for example I work with blue prints and I want to copy a section and copy into another new page?

How do you copy, for example I work with blue prints and I want to copy a section and copy into another new page?

Forgot to add that it would be an adjustment layer with some kind of mask on it already. The mask is uncentered when copy and pasted which throws it off.
I guess the same question would go towards doing the same for an object. How to copy and paste it over to a new doc, keeping its position within the document? is this possible?

Problems Importing into Address Book

Trying to import my address book from a vcf file. I get the following error:
Are you sure you want to add 1511 cards to your address book? There were problems importing.
My address book file has 2308 cards, not 1511.
Any suggestion

If you open Address Book, click on Card menuitem and select Edit Template. This will show you what the current template is and what fields may be added to the template.
You can then edit the LDIF file when it's created to select only the desired export fields that will match the template.
I believe when you then import into Address Book you will have an opportunity to match up the corresponding fields. Been so long since I did this I don't remember.

Synchronization problem prevents blue print import into JDeveloper

Similar Messages

Maybe you are looking for