Synchronization remains blocked has 4 of 4 l 'etape with my iphone 4s

Tks for your hep

If I'm reading this correctly, I'm having the same problem.  I connect my iphone 4s to my computer and itunes starts to sync.  However, it only makes it to "step 2 of 5 backing up iphone" and it locks up.  I left the phone connected all night, and when I woke up I found that it was still locked up in the same place.  I've uninstalled everthing from apple, and rebooted the computer and reinstalled everything.  Still nothing.  This just started last night, and was working fine a week ago.

Similar Messages

  • Has anyone had a problem with the iPhone 4 becoming unresponsive as a call is being received?

    Has anyone had a problem with the iPhone 4 becoming unresponsive as a call is being received?

    I'm sure someone has.

  • Has there been any problems with a iphone thats been unlocked

    I was thinking about getting my iphone 4 unlocked,has anyone had any problems with the phone was unlocked?

    What problems are you expecting after your iPhone is unlocked??  Oh no - I am being naïve - I am assuming legitimately unlocked by the carrier to which the phone had been locked?

  • Has anyone having an issue with the iphone 6 signal cell strength on Verizon?

    Is anyone having an issue with the iPhone 6 signal on Verizon?

    I'm having the same issue as most of you on this forum. my current OS is 4.3.5 and after a factory reset, the camera started working fine, however, once i done the restore the camera reverted back to the same issue - "the shutter on the screen wont open, and the still/video switch just flashes" - what is more strange is, i have the HP home&biz app installed and this has a camera function and the camera seems to work fine with that, therefore suggesting there is nothing wrong with the hardware and this is a software issue. I'm currently awaiting a member of the Apple support team to call me about this, will keep you posted. BTW - someone suggested, going into Location Services and switching off the camera and apparantly, the issue was resolved for them, unfortunatly, this didn't work for me extremly odd issue indeed!

  • How can i block an iPad from linking iMessage with my iPhone?

    Okay, so my friend has recently discovered that his parents' iPad has his number linked to the iMessage feature. So basically his parents can just go on the iPad whenever they want and read all of his messages. Is there any way that he can block the link between the iPad and iPhone?

    They can't read all of his messages, only his iMessages. This sounds like an issue your "friend" needs to take up with his parents. If he is a minor and his parents pay for his iPhone then they are most likely within their rights.

  • Has anyone had the problem with their iPhone 5 where some people cannot receive texts from you?  And if so, is there a fix?

    Has anyone had the problem of not being able to send texts to certain people? 

    Here is another screenshot.  In this example, I did 'Get Info' on one of the goofy ones, and it shows that this Wolfmother song is sorted by the Eagles.  ***? 

  • Has anyone else had trouble with the iphone 5 touch screen?

    So this happened within the last week. I bought my iPhone 5 brand new, its been perfect up until i clicked on my email icon at the bottom and it opened the calendar that is at the top of the screen. Also, when typing in imessage it clicked edit by itself, as if i wanted to delete text messages. Also, if you press your finger down on one spot on the screen and don't move, the screen shakes until it randomly decides to click something. I just want to know if anyone else has had this problem, if so did you restore it or just take it to apple? Also, If i restart it or do a hard reset it works fine for a bit then randomly decides to go crazy.
    If someone could help me out,Thanks! Its driving me nuts.

    Hi llaudermith11,
    If you are having erratic behaviour with the touch screen on your iPhone 5, you may want to take a look at the troubleshooting steps outlined in the following article:
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Cheers,
    - Brenden

  • Has anyone else had problems with the iPhone 4 overheating after an upgrade to iOS7?

    My iPhone has been running hot sinced I upgraded to iOS7.  Today, it rattled through more than 50% of its power while I was sending a text message, became so hot that I couldn't hold it, switched to temperature protection mode and then shut down completely.  It is now blank.

    Same for me! my iphone 4s gets extremely hot whit IOS 7.0.2.

  • Has anybody else had problems with an iPhone 4s loosing the ability to log on to wifi. My network say is apples fault due to hardware issues in the latest release. Anyone know anymore?

    Can anyone help with this issue please?

    Hi Chris, the problem is after the ios7.1 update my wifi will no longer connect. I contacted my network and they said they have received an email from Apple saying its a hardware issue and nothing my network can do ( soft reset, general reset or factory reset wont work and to contact apple directly. I was told that this is most common on the iPhone 4s. Online I have seen people being offered an option to buy out of warranty phones because this issue can't be fixed? That can't be correct can it?

  • Has anyone else had problems with the iPhone 4S camera not focusing properly?

    Hi, now I own a iPhone 4S, and have noticed that it takes extremely horrible pictures and video.
    The focus is only decent on the right half of the photo and is extremely blurry on the left hand side.
    Here is a picture taken off my phone http://iforce.co.nz/i/fqxa0oh3.jcz.jpg
    If you have any suggestions, please let me know.
    Many thanks, Ian.

    Same for me! my iphone 4s gets extremely hot whit IOS 7.0.2.

  • Data synchronization in blocks

    Hello,
    To synchronize data between a table-based block and the base, I use the 'DML Returning Value' property of the block.
    This obviously doesn't work with blocks based on a view. Thus I had to write a post-insert trigger to get the record ID (sequence generated) from the base. Then the corresponding item in the block has to be declared as primary key.
    Here is my question : is there a way to do this using the 'Advanced Database' properties (DML) even with view-based blocks ?
    Thanks for your help.

    That's a good idea, but in some cases, knowing at form level which block to go back to can be a bit tricky.
    I don't have this problem with a post-insert trigger, since it's at block level.
    Then I only get the ID of the current record (the only one I need to resynchronize), not all the records of the block.
    But I have to have another identifier to find the record in the base without its ID. On this point your method is better.
    I wanted to find a way to do it with the DML to get something more secure and easy to set up, without brainstorming on triggers, their levels, and the way to get the data back.
    Thanks for your help,

  • Hi, I bought a second hand iphone 4s and seller has blocked it and reset it know the iphone is asking for a  email and password that the seller was using, I can't contact him know and i'm left with an Iphone that is useless, can you help ma please?

    hi, I bought a second hand iphone 4s and seller has blocked it and reset it know the iphone is asking for a  email and password that the seller was using, I can't contact him know and i'm left with an Iphone that is useless, can you help ma please?

    Sorry, there is nothing you can do until the device is removed from the sellers Apple ID.
    Without that, your device can't be used, check these articles:
    iCloud: Find My iPhone Activation Lock in iOS 7
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account

  • How do I know which block has been changed in Master/Detail

    Hi,
    I have master detail blocks. How do I know which block has been changed?
    I used :SYSTEM.FORM_STATUS. It only gave me "Changed" or "Query". but didn't tell me which block has been changed in MASTER or DETAIL.

    I believe if :system.form_status != 'QUERY' you'll need to loop through through the blocks checking :system.block_status to see who changed. Of course you'd have to go_block() before checking the status.

  • STO was cancelled in R/3 but remains blocked in GTS

    Hello Master,
    STO was cancelled in R/3 but remains blocked in GTS. Can you please advise how to clear it ? Error is "Could not find any Export license.
    Thanks

    Check this link - Re: Delete PO & SO's in GTS
    Hope it helps.

  • Query block has incorrect number of result columns

    can anyone edit my query to eliminate below error ??
    SELECT FLROOPENHEAD.RONBR RepairOrder,FLROOPENHEAD.DATEOPENED DateOpened,NULL DateClosed,
    (SELECT FLREPAIRSTAT.DESCRIPTION  FROM FLREPAIRSTAT
    WHERE FLREPAIRSTAT.REPAIRSTATID = FLROOPENHEAD.REPAIRSTATID) RepairOrderStatus,
      (SELECT flrt.DESCRIPTION FROM FLREPAIRTYPE flrt
      WHERE flrt.REPAIRTYPEID = FLROOPENHEAD.REPAIRTYPEID) RepairType,  FLROOPENHEAD.REPAIRCENTER  RepairCenter,
    FLROOPENHEAD.FLVEHICLEID , FLROOPENHEAD.FLATTACHID,'O'
    FROM FLROOPENHEAD   WHERE FLROOPENHEAD.LDEVNBR =2334
    AND ((extract(DAY FROM SYSTIMESTAMP - TIMEOPENED)*24)+(extract(HOUR FROM SYSTIMESTAMP - TIMEOPENED)) <= 72)
    UNION
    SELECT FLROHISTHEAD.RONBR RepairOrder,FLROHISTHEAD.DATEOPENED DateOpened, null, FLROHISTHEAD.DATECLOSED DateClosed,
    (SELECT FLREPAIRSTAT.DESCRIPTION  FROM FLREPAIRSTAT
    WHERE FLREPAIRSTAT.REPAIRSTATID =FLROHISTHEAD.REPAIRSTATID) RepairOrderStatus,
    (SELECT flrt.DESCRIPTION FROM FLREPAIRTYPE flrt
    WHERE flrt.REPAIRTYPEID = FLROHISTHEAD.REPAIRTYPEID) RepairType, FLROHISTHEAD.REPAIRCENTER  RepairCenter
    from FLROHISTHEAD WHERE FLROHISTHEAD.LDEVNBR =2334
    AND ((extract(DAY FROM SYSTIMESTAMP - FLROHISTHEAD.TIMECLOSED)*24) + (extract(HOUR FROM SYSTIMESTAMP - FLROHISTHEAD.TIMECLOSED)) <= 72)
    ORDER BY DateOpened, RepairOrder
    i think error was at second Where condition.
    Error at Command Line:1 Column:0
    Error report:
    SQL Error: ORA-01789: query block has incorrect number of result columns
    01789. 00000 -  "query block has incorrect number of result columns"
    *Cause:   
    *Action:

    Hi,
    On comparison with 1st query and 2nd query,it can be easily noticed that ,1st query is returning 4 columns and 2nd query returns 5 columns in select clause.
    In order to work union ,both of your queries should select equal no of columns.
    Hence replace your query
    Original query(1st ) :
    SELECT FLROOPENHEAD.RONBR RepairOrder,FLROOPENHEAD.DATEOPENED DateOpened,NULL DateClosed,
    (SELECT FLREPAIRSTAT.DESCRIPTION  FROM FLREPAIRSTAT
    WHERE FLREPAIRSTAT.REPAIRSTATID = FLROOPENHEAD.REPAIRSTATID) RepairOrderStatus,
    ....Relplace with :
    SELECT FLROOPENHEAD.RONBR RepairOrder,FLROOPENHEAD.DATEOPENED DateOpened,NULL,/*Here you need missed the comma */
    DateClosed,
    (SELECT FLREPAIRSTAT.DESCRIPTION  FROM FLREPAIRSTAT
    WHERE FLREPAIRSTAT.REPAIRSTATID = FLROOPENHEAD.REPAIRSTATID) RepairOrderStatus,
    ....Hope this helps
    Regards,
    Achyut

Maybe you are looking for

  • Oracle XML Schema (Java) on Macintosh

    Hi Everybody, I tried your XML Schema parser on my Mac and I had no single platform specific Java or configuration problem. Congratulation. (I used the Windows download since I never had problems to unzip files) One minor problem is left: the file na

  • Regarding Performance Tuining

    Hi, I am pl/sql developer cum DBA. Before few months i started tuning our application. But some time my confusion that if some query taking more time to execution, then from where we need to start the tuning for that query. What should be in the mind

  • Flash SA Projector crashes when in fullscreen mode

    I've created a Flash SA Projector, it's a slideshow of sorts. It is on a timer and changes "slides" every 12 secs. It runs great inf Fullscreen Mode and normal mode. It is self running and I've let it run by itself for several hours. However, it cras

  • Testing builds in iOS Simulator

    Second question....decided to create a new thread. I tested a source code on the iOS Simulator that comes with xcode and I can't seem to move the main object in the game. It is supposed to bounce up and down and move left to right from platform to pl

  • Airport Express lights dead

    I have just returned from holiday, to find one of my Airport Express stations "dead". It is not showing any lights at all, neither amber nor green. My other Airport Express station, which acts as my base station is working fine, but this second one w