Synchronization should run even encounters the problem.

dear gurus
I've configured the synchronization process from MS AD to OID successfully. Now i want that if some problem occurs it should be skipped and on next interval further changes should be synchronized. For example i've a user in OID "David" already and AD administrator created the same user in MS AD, now sychronization process fails because this user is already there in OID and it can't be created. I want this faiulure should not stop the synchronization process.
Regards

if you remove the 'oidmatchingfilter' attribute, then it will not fail if the entry already exists. It will try to overwrite. Otherwise, it will give an error. In case you want to continue after error, add the following line in the config file
SKIPERRORTOSYNCNEXTCHANGE: true
Once you modify the configfile you need to updat ethe config file parameter in the profile using dipassitant.

Similar Messages

Process chain is running even after the 'No Schedule After' date

Hi Experts,
          On 19th sep, we scheduled a process chain where the scheduled start date is 20th sep, 07:30:00 and no start after date is 22 sep, 00:00:01. The periodic value is 'Daily' and there is no restrictions for this load.
         But yesterday the process chain ran at 7. We checked tbe jobs that triggered and found that the start date and no start after date is changed to 21 and 23 respectively.
        But the last changed date for the process chain is 19th sep only.
        Anyhow, we removed the process chain from schedule. But, I want to know the reason for this load that loaded even after the 'No start after' date.
       Please help me to know why this issue happened...
Regards,
Yokesh.

I also have been caught by this option once : the "do not start after" is here to avoid problems of scheduling : let imagine your system can be stopped, for any reason, so the scheduling will be postponed. In this case, it avoid, for instance, to load data during the day. It's not for running a PC for only a certain period of time.

ITunes won't run even in the safe mode

Installed the latest iTunes. It freezes all the time and when closed won't start up again even though it eats up the memory. Itried running it in safe mode and other tips but nothing is working. It now stopped working even in the safe mode. Any kind of solution available?

Using system restore can create problems as well as solving them. I have seen system restore destroy a Firefox setup. The installation may be OK but to be sure perform a clean install
# [http://kb.mozillazine.org/Uninstalling_Firefox Uninstall Firefox]
# Delete the Firefox [http://kb.mozillazine.org/Installation_directory Installation directory], default location C:\Program Files\Mozilla Firefox\
# Download the latest version from http://www.mozilla.com/ and install it
If Firefox still does not start, try creating a new profile folder. Firefox stores user data in a profile folder, creating a new profile will show if the problem is with the old profile. For how to do that see [http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows creating a new Firefox profile on Windows].
If the new profile works, you can copy selected data such as bookmarks and passwords to the new profile. For details see [http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox transferring data to a new profile]. Do not copy the preferences file, and it is best to re-install any add-ons.

WiFi constantly drops on Pro (10.9.4); running diagnostics (just running it) fixes the problem for 1-2 minutes.

My MacBook Pro constantly drops WiFi, at home and elsewhere. Other devices run fine. When I run diagnostics, it defaults to ethernet, I switch it back to wifi, it says Diagnostics cannot fix the problem, I run it again once or twice and it picks wifi back up, two minutes later, I have to repeat the entire process. I've looked at similar threads, and none of the offered solutions work, nor are they recently updated. I'm running 10.9.4 (in fact the problem seems worse since the "upgrade"). I also live in a country without Apple Stores. I'm not using Airport, but since the problem is with the Mac and not other devices, and with the Mac everywhere I go, the router is not the problem, nor is the network.

I should also point out that there is no indication that wifi has been dropped, other than the web page not opening - I have full bars, and diagnostic window says I am connected, complete with IP address. Only when I click on "assist me/diagnostics" does it indicate I am not connected.

I have many Apple IDs some i dont even remember, the problem is one of them still attach to my iphone.

Hi ,
i have an iphone and yes i bought it! the problem as described above, is with all my Apple IDs, actual emails and devices i own.
after upgrading the iphone to iOS 7 im stucked at the activation lock and im OK with that - i can see my email (i guess) as the one supposed to free my phone.
still when i try to login with my details i receive the "********@gmail.com cannot be used to unlock this phone" - and truely i see other devices under this Apple ID but not the one im trying to unlock.
i deeply understand this security mechanism, the only thing im asking for is an option to send an email to the specific email attached to this phone, because obviuslly i dont remember which email is attached to this device - but what about sending a notification to that email ?
will that be possible ?
thanx
p.s - i really have a problem remember passwords thats why i use credentials vault fot emails etc... my only hope is to receive an email from apple to this Apple ID's email to validate my ID -

From Here http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.

TS3694 Hi, just tried to do the latest update for my iPhone. Unfortunately, all I have now is a screen telling me to connect to iTunes. I've done that but iTunes won't recognize my device. Can you advise me on what I should do to fix the problem?

Hi, any suggestions as to how I can fix the problem on my iPhone?

Hello, ClareOlys.
Thank you for visiting Apple Support Communities.
I would first make sure all updates have been processed for the computer and iTunes. You may need to place the device in recovery mode before iTunes will recognize the device. Here is the article that explains that process.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
If the device is still not recognized by iTunes, see the steps in the two articles below.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Cheers,
Jason H.

I've tried all the suggestions--FF 4 crashes or stops loading pages as often as 4 times a dy--even when the problem isn't plug-in problem--and I lose memory of tabs that were open

Any help will be appreciated--I also get no results @ about:crashes
There is no listing of reports even though reports sent
W7 Home Premium
Acer Aspire 7741Z-4643
Pentium P6100
Can I Get FF 5 beta?

Problem involving videos played from the YouTube site is much less noticeable after upgrading from FF 4.0b8 to 4.0b9, but still occurs with embedded YouTube videos, where blacking out of other portions of the window still happens.

Web service - if the soamanager not run, what is the problem ?

When I run the transaction soamanager, the system open the browser but:
with this message "Service cannot be reached".
What is the cause ?
tks.

Make sure the webdynpro node in the ICF is active.
Run transaction SICF, then click execute.
From the tree below, open default_host, sap, bc, webdynpro, sap. Activate the APPL_SOAP_MANAGEMENT node, by right-clicking on it, and choosing "Activate Service".
Regards,.
Rich Heilman

HT5624 Anytime I use my apple Id I am asked to review it and this always what I go through which does not even solve the problem. What do I do?

What is review of apple id?

Hi there,
This may be happening if you have not used this Apple ID in the iTunes store before. Take a look at the article below for more information.
Using an existing Apple ID with the iTunes Store and Mac App Store
http://support.apple.com/kb/HT2589
-Griff W.

Problem: Fan at full speed all the time - even when the Mac is turned off

Hello,
my Mac mini suffers from a very strange problem. I've had it for half a year now and recently bought a new power adaptor since my old one got damaged. I plugged it in and everything was fine - until half an hour afterwards, when the fan suddenly made itself noticeable at full speed. But it didn't stop; it went on, curiously even when I shut the Mac mini down. That's right. even when the system's turned off. The noise is really unbearable and only stops when I plug off the power cord.
Any ideas why this is happening?

My Mini started doing this yesterday. I came home from work and the fan was going full blast. Even after shutting the machine down, the fan would continue to run at full speed (and it is LOUD...much louder than my full tower desktop PC with 4 80mm fans). The only way to stop the fan is to completely unplug the Mini from the power supply.
I doubt that this is due to faulty wiring as my Mini is plugged in to a very nice UPS unit that conditions the power.
Now, I'm willing to admit that this may be entirely my fault since I have upgraded my Mini with 1 GB of RAM, a Pioneer DVD burner, and a higher capacity hard drive. However, the Mini has been running 24-hours-a-day for 5-6 months since my final upgrade, so it would seem that my upgrades are unrelated to this issue. Also, since someone else is having the same problem, again, my upgrades seem unrelated.
I was told on another forum to try resetting the PMU, which I will try when I get home today. If it works, I'll post. Seems unlikely though since the fan runs even when the Mini is powered down.
If anyone has any other ideas, I'd be glad to hear them. I'm assuming that my Mini is no longer under the 1-year warranty since I have performed so many upgrades myself, so, if this problem is something that can only be fixed by Apple, then it will probably cost an arm and a leg.

When I drag a photo to the timeline on iMovie, a different photo appears. I've tried recreating thumbnails, and also created the problem photos in a test library.

When I drag a photo to the timeline on i-Movie sometimes a different photo, or even a video appear and sometimes it is just a black screen. I've tried recreating thumbnails, and even copied the problem photos into a test library, but still can't get it to work. Genius Bar kept my laptop 6 days and didn't do anything to help, just said the project was corrupt and I would need to recreate. Just tried a completely new project with totallty different photos and still experiencing the same problem. Anyone else had this issue?

Rob Case wrote:
I have created the same document SEPARATELY using both '08 & '09 versions of Pages. After creating the document in Pages '08 I 'Save' the file to my documents. And then email with attached file.
(1) I am not trying to 'convert' the same document from Pages '08 to Pages '09
(2) But I still can't understand why one version should act differently from the other even on an iOS device?
(1) It's not me which wrote :
> The file is formated for PAGES within the Share - Via Mail Options, not PDF or WORD.
(2) Simply because under iOS, the app isn't supposed to import iWork '08 files.
The internal description of the document is really different in '08 and '09.
To get more help, ask in the forum dedicated to iWork for iOS.
Here most of us aren't using Pages4iDevices.
Yvan KOENIG (VALLAURIS, France) vendredi 10 juin 2011 17:22:42
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

App shud run even if explorer crashes or restarted

i have written a app specifically for windows.i start the app using "javaw" and runs perfetly.now is there any method by which the app continues to run even after the explorer is restarted

You could run it as a service... there's a tool called jnt that works really well...
http://www.eworksmart.com/JNT/
if you need it to display a UI to the user you can use the option in the services options to "interact with desktop"
that'll do it..

My mac pro suddenly stops working (2011), connection to the monitor stops, but de tiny light on computer still on and all sound stops. what's the problem?

my mac pro suddenly stops working (2011), connection to the monitor stops, but de tiny light on computer still on and all sound stops. what's the problem?

When the display turns off, it is not clear whether the computer has halted, or whether the display subsystem has failed.
Those tests determine whether:
a) Your Mac software had stopped working OR
b) Only the display had stopped working
If the pressing the Caps lock light on the keyboard lights the Caps Lock light on the keyboard, some software is still running -- your Mac has not halted.
If pressing Control-Eject on the keyboard, followed by the Return key shuts down your Mac, the software was still running.
¿Software was still running?
--Yes, the problem is ONLY in the display subsystem
--No, this is a computer-wide problem such as a kernel panic

I want to install my photoshop 5.0 limited edition but the pc displays i should check if it is a 32 or 64 bit application. i changed my windows os from xp to win7 64 bit (i think that is the problem) how can i run my photoshop on this system?

i want to install my photoshop 5.0 limited edition but the pc displays i should check if it is a 32 or 64 bit application. i changed my windows os from xp to win7 64 bit (i think that is the problem) how can i install and run my photoshop 5.0 le on this system?

Kglad Creative Suite 2 is only applicable to individuals affected by the activation server shut down. A complete list of affected software titles can be found at Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products.

I can't access Instagram when I'm on cellular data, but with Twitter, Facebook, etc. I have no problems. I've tried restarting my phone, restarting the network settings, even reinstalling the app but nothing works. What should I do?

I just finished updating my iPhone 5 to iOS 8.0.2. It was working fine after a week, and then just yesterday, I couldn't access Instagram when I was on cellular data, but with Twitter, Facebook, etc. I had no problems. I tried restarting my phone, restarting the network settings, even reinstalling the app but nothing works. What should I do?
P.S. I have the same problem with my Clash of Clans app. Only works with Wifi, the app doesn't load when i;m o

Hi, dansamson.
Thank you for visiting Apple Support Communities.
I would recommend going through the steps in the article below. If the issue persists and your device OS is up to date, I would recommend contacting the developer of the app.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Cheers,
Jason H.

Synchronization should run even encounters the problem.

Similar Messages

Maybe you are looking for