Synchronizaton of changes in SAP systems

Hi!
I have the following problem.
I have two that are different, it means some tables are changed.
Is there some transations and/or tool, that allows to track all the changes made in both systems comparing customer tables, reports, perhaps repository.
I have heared about Tcode SPRO_ADMIN.
Has some information about this issue?
Thank you very much!
regards

Hi Axel,
a) CCSV doesn't compare reports
b) for Z or Y objects, you can go to the manual selection and enter the names of the Z / Y tables you want to compare
c) yes, you can compare across clients, just make an rfc connection from one client to another
d) these are the types of objects that can be selected
C     View cluster
L     Logical transport object
S     Table (with text table)
T     Individual transaction object
V     View
     Table
In addition to these, you can compare
1. Customizing piece list/transport
2. Business COnfiguration Set
3. ALE Distribution Group
<i>And what exatcly can I compare?
E.g. If I change one table in one system and have exactly the same table unchanged in other system. Can I check it out with this tool?</i>
If there are structural differences between the two systems, then it will inform you about this difference and choose the identical fields and compare them. Also, you can define which fields you want to be compared

Similar Messages

Source System changes from SAP System to BI Warehouse on ECC activation

We are in the process of building a new development environment from an existing development environment.
After copying from system backup in the new development environment we performed BDLS to map to new source systems. At this point of time the source system for ECC ("SAP System from Release 3.0E" was changed to type "SAP Business Information Warehouse".
Why does this happen?
How can we prevent this?
Thanks for your help.

Hello.
Please check the following note if ti can be helpful to fix this issue.
1087980-ECC Source systems appearing in BI folder
Thanks,
Walter Oliveira,

How to check last mint change in sap system

hi all,
last night someone delete some packages of abapdev from DEV system, how can i insure that who has done that ?
plz guide
Regards
Khan

St03n --> left side pane select as Expert Mode --> Select the date --> click on the users and statistics --> user profile
you can c who are all users have logged in for that day. Select a user and double click and then you can get what are all the transactions he has ran on that particular day.
I hope this helps you.
Mahesh

Compliance Calibrator for multiple SAP systems

I was wondering if anyone could assist me with my query. We are currently performing an implementation of Virsa CC for a client and have begun to configure a CC DEV system they have installed with their custom SoD rule set. The DEV CC system (sitting on a stand alone NetWeaver box) is "connected" to four SAP systems (DEV, QA, HR DEV & HR QA). When we are building "functions" (i.e. raise purchase orders) in CC it asks us to define a SAP system when we are entering the transaction codes. We've been configuring the functions with SAP DEV as the system, however when we run the analysis of results we would like to get results from QA as well. It appears that the risk analysis only works for the system that you have defined the functions in (i.e. we get results for users in DEV but not for users in QA).
My questions are as follows:
- Do you need to define all the systems you wish to run a risk analysis for within the function (i.e. function = Raise purchase orders. DEV ME21 & QA ME21)?
- If so, is there an easy way to convert our functions so that they point to QA as well (we've noticed that we can't edit the SAP system once the function is saved)?
- Is it possible to export the functions and then define the SAP system when importing them back into CC (we've noticed with the SAP delivered rule set that SAP DEV was automatically defaulted)? This is particularly relevant as we would like to export the rules from the DEV CC system and import them to the PROD CC system without having to manually create the rule set again; and
- Is it possible to export the rules and manually change the SAP system reference and import them back into CC (i.e. do a "replace all" DEV to QA)?
Any help would be greatly appreciated.
Thanks,
Alexi

In order to perform what your are trying to do in CC 5.2, you will need to go to configuration and setup a logical system, such as SAP R/3 and define all the appropriate systems for the logical system. Then, when modifying the functions, you will need to set the tcode (action) to the logical system defined, such as R/3 or APO, etc.
The cross-system functionality only comes into play if you want to analyze the SOD where a conflict would occur if a user had access to one function in one system (for example - purchase order processing in APO) and a conflicting function in a different system (for example - Vendor Master in R/3).
If you simply want to check who has violates a risk against multiple system - the logical system is the best way. You can have an logical system by system type - R/3, BW, APO, SRM, etc.
To convert this over, you can export the rules and during the export you have to define the new system when exporting the file. If that doesn't work, I'd just delete everything out, and use the upload files to reload the rules with the correct data.

IP Change on SAP Servers

Hi,
The purpose of this question is because our company is moving the main headquarters to another plant and we need to move the site, and this also includes the SAP Servers to another location.
So we need to change the IP addresses for every SAP Server that we have.
We have the following architecture:
1 SAP application server defined with hostname SAP-APP (Production system). Operating System is Microsoft Windows Server 2003 Standard Edition with Service Pack 2.
1 SAP DB Server defined with hostname PRODUCCION (Productive DB). Database is MS SQL Server 2000 with Service Pack 4 and Operating System Microsoft Windows Server 2003 Standard Edition with Service Pack 2.
1 QAS and DEV Server with a local Database defined with the hostname QAS_DEV. Operating System is Microsoft Windows Server 2003 Standard Edition with Service Pack 2 and the database is MS SQL Server 2000 with Service Pack 4.
We do not use Print Servers or IP Printers on SAP, we use default printers for every user, using the SWIN: Windows printing via SAPlpd.
Our SAP Version is SAP ERP Central Component 5.0.
Notes related.
And then, we checked the related notes and topics on market place for changing an IP address to a SAP Server and found the following ones:
Note 403708 Changing an IP address.
Note 88346 Changing the RFC destination if IP changes are made.
Note 25917 Changing to /etc/hosts are not accepted.
RFCs on transaction SM59 and table RFCDES
The RFC that we are most worried about are the following:
PRODUCTION:
RFCDEST: CONEXION A QAS
RFCTYPE: 3
RFCOPTIONS: H=10.172.20.14,S=10,M=020,U=EESPINOSAZ,v=E962007D7D3C11AE883C362D16A252D
RFCDEST: SAPNET_RFC
RFCTYPE: 3
RFCOPTIONS: A=1,a=5,H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,
RFCDEST: SAPNET_RTCC
RFCTYPE: 3
RFCOPTIONS: H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,S=01,M=0
RFCDEST: SAPOSCOL_SAP_DB
RFCTYPE: T
RFCOPTIONS: H=10.172.20.13,N=
10.172.20.13\usr\sap\PRD\SYS\exe\run\SAPOSCOL.EXE,R=N
RFCDEST: SAPOSS
RFCTYPE: 3
RFCOPTIONS: A=1,a=5,H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,
RFCDEST: SDCC_OSS
RFCTYPE: 3
RFCOPTIONS: H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,M=001,U=
QAS:
RFCDEST: CONEXION A DEV
RFCTYPE: 3
RFCOPTIONS: H=QAS_DEV,S=00,M=030,U=EESPINOSAZ,L=E,v=3734043406A307628776795A292D89,i
RFCDEST: CONEXION A PRD
RFCTYPE: 3
RFCOPTIONS:H=SAP-APP,S=00,M=200,U=EESPINOSAZ,L=E,v=A7361E1928457A0626D502BA5F3FB8,i
RFCDEST: SAPNET_RFC
RFCTYPE: 3
RFCOPTIONS: A=1,a=5,H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,
RFCDEST: SAPNET_RTCC
RFCTYPE: 3
RFCOPTIONS: H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,M=001,U=
RFCDEST: SAPOSS
RFCTYPE: 3
RFCOPTIONS: A=1,a=5,H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,
DEV
RFCDEST: CONEXION A QAS
RFCTYPE: 3
RFCOPTIONS: H=QAS_DEV,S=10,M=020,U=EESPINOSAZ,L=E,v=F004DE7B5EC01E876B998927E7417A,i
RFCDEST: SAP_INTERNET_GATEWAY
RFCTYPE: T
RFCOPTIONS: H=QAS_DEV,G=pynl0x.pypmsa.com.mx,g=smtp.wan,N=/sapmnt/SID/exe/mlunxsnd,R
Is there any problem if we have defined like this the RFC connections?
Are we missing anything using these notes or do we have to consider anything else?
Best Regards,
Erik Espinosa

Hi,
you are not changing the SAP System Host name, you are only change the IP address SAP Server.
for that you are only worried about the RFC destination which are created using IP address of host,
you need to change those RFC and assign correct IP address.
Production.
RFCDEST: CONEXION A QAS
RFCTYPE: 3
RFCOPTIONS: H=10.172.20.14,S=10,M=020,U=EESPINOSAZ,v=E962007D7D3C11AE883C362D16A252D
this RFC is created under Production system for PRD - QAS connectivity.
H=10.172.20 --> assign the correct the ip address of QAS system.
RFCDEST: SAPNET_RFC
RFCTYPE: 3
RFCOPTIONS: A=1,a=5,H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,
RFCDEST: SAPNET_RTCC
RFCTYPE: 3
RFCOPTIONS: H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,S=01,M=0
RFCDEST: SAPOSS
RFCTYPE: 3
RFCOPTIONS: A=1,a=5,H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,
RFCDEST: SDCC_OSS
RFCTYPE: 3
RFCOPTIONS: H=/H/10.172.20.115/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001,M=001,U=
10.172.20.115 -> check the correct IP address of SAP router running at your side.
RFCDEST: SAPOSCOL_SAP_DB
RFCTYPE: T
RFCOPTIONS: H=10.172.20.13,N=
10.172.20.13\usr\sap\PRD\SYS\exe\run\SAPOSCOL.EXE,R=N
10.172.20.13 -> check the correct IP address of SAP production server host
regards,
kaushal

How to revert back User Management changes with SAP ep6

Hi,
While implementing sso for R/3 with sap EP, we did some changes in SAP System of UM configuration, after that we are not able to login with existing super user.
We changed the existing userid SAPJSF to some other value in SAP system of UM. This is causing the problem.
How can I revert back the changes as currently I am not able to access the UM Configuration?
Which file can be change for reverting back the changes?
Thanks,
Manish

Hi Heiko,
I restarted server two times but it does not work. I also reverted the changes from propertysheet as well. Still it does not work.
After that I looked in defaultTrace.trc file and found the exception <b>[EXCEPTION]
#1#com.sap.engine.frame.ServiceException: User is locked. Please notify the person responsible</b>
The exception detail is below:
1.5#0011435A6406001D0000000F000013E80003FB0CCFA7CC82#1120457372187#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_17##0#0#Error#1#/System/Server#Java###Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
[EXCEPTION]
#1#com.sap.engine.frame.ServiceException: User is locked. Please notify the person responsible
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:531)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:201)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:142)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: User is locked. Please notify the person responsible
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:2099)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:2315)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:280)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:224)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:528)
     ... 6 more
Can you please tell me that how can I unlock the user as my portal is not coming up. Your reply will be helpfull to me.
Warm Regards,
Manish

Unable to change the data source of SAP system

Dear all,
We have install SAP netweaver EHP1 standalone java on oracle 10.2.0.5 on windows 2008 R2.
while installation i have given the central SLD system as solman,
By mistake i have deleted the system from SMSY.. now when i createed the system manually i am unable to change the data resource as SLD due to this i can start my SMD configuration
Request please let me know how to resolve this issue.
Thanks
Paresh

Hi Paresh,
You can proceed with deleting your SAP system from SMSY (along with connected technical content such as AS Java definition) and the run the LANDSCAPE FETCH through transaction SMSY_SETUP to have the correct definition of your SAP system in SMSY.
Following this, you could use the addon Landscape Verification (a new thing I learnt today!!!) to check the correctness of transaction SMSY. The following link details the Landscape verification 1.0 for SolMan:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e093b3ce-c034-2d10-01bc-b51f1691d3da?quicklink=index&overridelayout=true
Hope this helps sort out your issue.

How to change the hostname was set/defined in SAP system?

Dear Expert,
My customer met a problem about that:
he defined his host name with small characters(lower case) "abc" when he installed the SAP system (Windows2003(x64)-Solman70SR4).
But in SM21, the title of sm21, the hostname was recognize as upper case "ABC".
in SM51, the hostname was also recognized as upper case "ABC"
in STMS, the tab of 'transport tool', it is recognized as lower case "abc" in TRANSDIR.
in SM59, it is recognized as upper case "ABC" in internal connections, but recognized as lower case "abc" in ABAP connections, such as TMSADM@<DB>.DOMAIN.<sid>
While in Java URL, it is recognized as lower case "abc". With my test, the Java URL is not case sensitive for the HOSTNAME part in HTTP link as I tested to change the hostname both in upper case and lower case in etc\hostname file, the URL both are working. (not sure if this is due to the test is with intranet or not).
Based on SAP note 611361, it seems that:
"Hostnames must be considered "case sensitive". That means
hostnames shall be used in the same case (upper or lower) in all
SAP configurations as well as in the network configuration (DNS
or etc/hosts). You must ensure consistent name resolving of the
hostname from hostname to IP address and back from the IP address
to the the same hostname (case sensitive match). See also note
129997."
Please help to suggest.
Many thanks in advance,
Perry Song

Section 4.13 "Checking the Consistency of the Host Name" in [This Upgrade Guide|https://websmp208.sap-ag.de/~sapidb/011000358700000353422008E] has a good explaination of what & how to check your hostname / parameter configuration.
on a windows box, another way to get the TCP/IP name is to type 'hostname' from a CMD window.

How to discable password change in SAP ERP (or any ABAP system)

Hello,
We have password synchronization between Sun Identity Management system and SAP ABAP systems. This ensures that the password is identical between the network ID and SAP ID. In order to avoid any issues, we would like to disable the ability of the users to change their password in the SAP system directly (on the initial logon page). This forces the users to go through Sun Identify Management system for resetting the password (desired behavior). Can you please suggest if there is a way to do this. I remember seeing an OSS note that meets the requirement a couple of years ago but now I can't find it.
Thanks
Sri

Hi Sri Vandan,
Please check note number: 379081 if it helps for you.

Replicate changes from one SAP System to another

I have a requirement in which I have done some changes in one SAP System and it is not getting reflected to the other one. Please note that the SAP System which I am refering to is the one we get from SM51 Transaction code. Please note that the SAP System ID and the client is the same.
Thanks
Arghadip

Yes I am able to view all the systems but how can I replicate the changes from 1 to another. We had done the changes in system A but it is not getting reflected in system B. Is there any ways to replicate it.
No Experts to answer this question?????
Thanks
Arghadip

What changed to make when sap system changes?

Hi Friends,
our legacy sap system has changed and i need to change the configuration.
i have already changed the RFC Destination and port details in idoc reciver communication channel, even then the message to not going to new system
i assume that the partner profile details in receiver legacy sap system is wrong.
Please let me know where can i get the partner details to give it to legacy people.
Please help !!
Regards,
Suresh.

have these as your references and you can easily troubleshoot and make changes;
Configuration steps required for posting idoc's(XI) -
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
ALE configuration for pushing idocs from SAP to XI -
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
Troubleshooting of ALE Process -
/people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process

DDIC and SAP* changing into usertype system

In order to secure the Standard Users DDIC and SAP* against misuse i
planned to change them into SYSTEM accounts instead of DIALOG.
Is there, in case of a standard SAP implementation, any indications that
we shouldn´t do this?
In the guidelines and forums i couldn't find any arguments against
such a situation.
The SAP* accounts is further secured by setting the system profile
parameter 'logon/no_automatic_user_sapstar' to 1.
Thanks in advance for your reactions.
With kind regards,
Edwin Stam

As of release 7.00 EhP1 there is a new procedure for this.
See --> Lock DDIC user but keep the RDD* jobs working. and the link to the help.sap.com documentation.
The users are already blocked from authenticating via trusted RFC. Changing the user type to system will also prevent them from being used on the issuing system for SAP Logon Tickets as well as attaching a SAPGui to a logon session in the backend systems. You can also disable the password in SU01 (which will delete the password hash).
Alcatraz for standard users...
Cheers,
Julius
Edited by: Julius Bussche on Dec 16, 2009 3:28 PM

How can we change the SID of an existing SAP system.

Hi to all basis experts.
Is it possible to change the SID of an existing SAP system.
i am performing R3copy method and i want to change the SID of the tar

check these link
http://help.sap.com/saphelp_nwmobile71/helpdata/en/aa/1dc94af0fa11d3a6510000e835363f/content.htm
http://sap.ittoolbox.com/documents/changing-the-ltsidgtadm-password-17764

Problem :" No changes allowed to SAP system objects" ,pls...

Hi guys, I recently installed the minisap system successfully but after I log on to the system every time I want to create a new program ( SE80 ), change and edit old program then the systems responds " No changes allowed to SAP system objects".
Have anyone had the same problem.
I would be very grateful if any one could help me.Pls..
Note:Mini SAP i get from Books ( ABAP Objects: Introduction to Programming SAP Applications
by Horst Keller, Sascha Kruger )
Regards
Indra Budiman
[email protected]

Hi Indra,
On the face of it, it seems you're trying to change the standard SAP objects (programs). Could you specify which program you're trying to change / add ?
Remember, all your new programs should begin with either a 'Z' or 'Y'.
Regards,
Anand Mandalika.

SAP System Message: Syntx error or generation error in a screen

dear sap basis gurus,
i am currently having problems signing on to our DEV server. i get this error message:
<SID>: SAP System Message
Syntx error or generation error in a screen.
it won't let me log on.
there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
have you encountered this problem before? please help me as there we have two imminent go-lives.
thank you very much in advance.
best regards,
albert

hello nick, ashok,
thank you very much for your responses.
i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
i hope i would no longer encounter the error message.
again, thank you.
best regards,
albert

Synchronizaton of changes in SAP systems

Similar Messages

Maybe you are looking for