Synchronize By Audio No Longer Works After 7.2 Update

After installing the Premiere Pro CC 7.2 update, the synchronize by audio no longer works correctly. When you highlight the clips and sync by audio it acts like it's doing something but then puts the clips nowhere near close being a match (usually one clip on one side of the timeline and the one on the other).
Is anyone else having this issue? I've run into it on two seperate computers bothe running Premiere Pro CC 7.2 on Windows 8.1 machines.
- Dennis

Bumping this. I'm a brand new CC subscriber and the sync function was a big part of why I moved to CC. 50% of the time it works, but the rest of the time, it pushes the video clip much farther down the timeline.
Update 1: To clarify, I am doing this from the sequence itself. So tracks A1/V1 are the original audio/video from camera, then A2 is my sound I want to sync.
It does not seem to have a problem syncing the same "problem" clips when I use the "Merge" by Audio from the Bin.
Update 2: I found that, if I unlink the original A1/V1 clip, then select all three (A1/V1/A2) and Synchronize, it works.
Obviously, this is an unacceptable workflow, but I hope that helps Adobe figure out what's going on here.

Similar Messages

HT6114 My double clicks no longer work after doing this update. What happened?

Double clicks in iPhoto no longer work after doing the update. Trying to troubleshoot, but feeling dense in that I can't get this thing to work. Any suggestions, please?

Try this thread > https://discussions.apple.com/message/23317566#23317566

Audio no longer working after upgrade

Hi,
After doing an upgrade this morning, my audio no longer works.
Booting into KDEmod gave the first clue when I got an error message saying audio not found.
The output of alsamixer say "alsamixer: function snd_ctl_open failed for default: No such device", yet my modules have not changed in rc.conf.
Could this be related to HAL also being updated?
Thanks,
JTD

Do you by accident have more than one sound-device? I didn't lose sound but "aplay -l" showed that ALSA has changed the order of the cards. Hence I suddenly didn't get sound from where I expected it.

Apps no longer work after installing ipad2 update 4.3.5

Apps no longer work after installing IPad 2 update 4.3.5

i am having the same issue as well. whats worst is that i bought that app. you guys can try "Office to PDF" thats is the one that is currently not working for me.

Apogee Jam No longer working after 1.1 update?

My apogee jam is no longer working after updating to Garageband 1.1. I have an Ipad 2 with firmware 4.3.3.
Specifically what happens is:
1. I open the garageband app
2. I select the guitar amp
3. I plug the Jam chord into Ipad (guitar is already connected to cord)
4. Jam light goes green, blue, bright green then green
When Jam light goes bright green, the monitor button in garageband goes dim and doesn't work.
I've tried plugging my guitar in first, then starting garageband, no difference in results.
I have tried turning the monitor "on" prior to pluging in the jam, when I do this the monitor/sound gate window stays open until the Jam bright green goes on, then it disappears and the monitor button goes dim.
Outside the garageband app, the ipad does recognize the Jam in settings, general.
What's worse (for me...) is that I backed up the Ipad in itunes thinking that app data would also be backed up (as I read that in a description of backup). I then deleted garageband from the ipad and then restored it from itunes. Guess what, lost all my songs... Bummed out... Why wouldn't my songs be backed up???
Anyway, any ideas on the Jam issue would be greatly appreciated. I'm hoping I am just overlooking a setting?

Unfortunately, I don't believe that Apple keeps prior versions of Apps available at the store. GB was the first app I purchased there day one of my Ipad, incredibly worth the $, and I did actually look to see if you could go back legitimately.This is just one of the many reasons to JBreak your devices, so that you can go backward if you need to. This is a perfect example of why Apple should make prior versions available, but they think they know it all and never make mistakes, so that will never happen. Again, this is why folks take things into their own hands and why the scene exists. There are plenty of abuses, more than not IMO, but here is a perfect example of how people are screwed and can't use their Jams any longer without a JBroken device. They obviously know that this issue exists, they have employees on these forums. It will be months if ever they fix this issue, because the number of owners of Jam, although in the thousands, is small potatoes compared to the Apple owner universe. I believe it will only be fixed if Apogee is able to put enough pressure on Apple. If you see the Jam removed from the Apple store and GB site you know that Apple is choosing not to fix it, because they won't sell or promote it directly and then have to deal with complaints and returns. But even this will happen slowly...
Actually it occurs to me that Apogee may have to redesign the Jam AGAIN in order to get it working with 1.1 on Ipad 2 and Iphone 4s (devices with the newer processor). I wonder if they will recall or replace the Jams for people who now have Jams not compatible with Garageband. Again, Apple should be posting a warning for Jam owners on the Garageband download page, but that will never happen because Apple doesn't care about small potatoes.
Message was edited by: Rickd3333
Message was edited by: Rickd3333

Autofill no longer works after recent Firefox update

The Auto-fill function on google toolbar no longer works ever since I updated to newest Firefox

See this for support information about the Google Toolbar.
[http://www.google.com/support/toolbar/?hl=en]
Or visit the Google Toolbar forum.
[http://www.google.com/support/forum/p/Toolbar?hl=en]

Speakers no longer work after Mountain Lion update.

After my update of Mountain Lion my speakers in my macbook pro no longer work. The speaker symbol is grey and the volume can't be moved. Anyone else have this issue?

Seems there is no real solution to this problem. If you have a time machine backup you can go back to 10.7.2.
Since I did the clean install of 10.7.2, I don't have any audio problems. My MacBook Pro now runs smoothly. I guess I stick with 10.7.2 until 10.7.4 is released.
You can also try some of these suggstions: https://discussions.apple.com/thread/3705456?start=15&tstart=0
Hope you get your audio working.
AJ

Onboard Mac Lan no longer works after 1.9 update!!!

I was using bios v1.8 and both my Mac Lan and my Giga Lan were working perfectly fine. Now that i updated to v1.9 my Mac Lan no longer works but my Giga is fine!!!
My Mac Lan still gets an ip address from my router, but i cannot ping the router nor anyone else on the network and my internet does not work!! So right now im using my Giga lan but i want my other one working like it was.
I tried going BACK to v1.8 but it did not fix the problem, so i went back yet again to v1.9 and im still left with the same problem. Ive tired disabling it and re-enabling it in both the bios and in windows and still nothing. Ive also tried re-installing the drivers and that did not work either. I even ran a Winsock Fix but that didn't fix the problem either.
Is anyone else having this problem besides me? what can i do to fix it???

Download new bios and extract it to a directory where you can find it (root of c:\ if you are lazy like me). Run wminfo if you are paranoid about losing your mac address and copy it down for your nvidia adapter.
Restart windows in safe mode. Close every application down in task manager.
Run winflash as described below and CHECK ALL THE RIGHT BOXES TO UPDATE BOOTBLOCK AND TO CLEAR THY CMOS. Read Syar's description below as that is what I used:
Quote from: syar2003 on 30-July-05, 00:24:48
No , floppy flash is not neccesary !
Can use
C:\Program Files\MSI\Live Update 3\FlashUty\Award
winflash.exe
Place checkmarks on bootblock/dmi area/update all/clear cmos
During flashing you see it will verify the programming of the bios chip .
And the good thing is unlike dos flash you can redo it if it fails , just by starting taskmanager and kill winflash.exe
and start over (as long as the machine isn't powered down or restarted).
I always say no after the flashing when asked to restart , exit the winflash utility , make a normal shutdown , turn off PSU for 10 seconds , then turn back
on , enter bios and load optimized default , followed by a boot to build/update dmi pool .
Kill all unwanted apps in the systemtray before running winflash and dont have any other applications running .
Best way is to boot to windows safemode .

SCIM no longer works after last package update

I just did the usual
sudo pacman -Syu
and now SCIM Pinyin chinese input no longer works:
When I press the hot key to enable chinese input, it only shows "English/European" in the notification bar that pops up, and I cannot enter chinese characters. Also after activating the hotkey, the backspace key suddenly no longer works anymore, until I disable SCIM again by pressing the hot key once more.

Thank you, actually it worked again after a reboot. (No idea why.)
I reboot this PC very very rarely, it's not supposed to be rebooted.
Last edited by mir91 (2014-07-10 02:00:07)

POP Accounts no longer working after 3.0 Update?

Before I upgraded to version 3.0 of the OS, I had two POP3 email addresses set up on it, they are still there but no longer work (download or send) nothing in the settings has changed from pre 3.0
Anyone else experienced this problem? Anyone got a solution?
My .Mac/MobileMe accounts are working as normal BTW....

Delete and re-install them.

Capacitive keys no longer working after windows 10 update

greetings
i updated my Nokia Lumia 520 , from windows 8.1 to windows 10, but the windows ,and the back capacitive buttons are no longer working, however the search button is responding. since these are the main navigation keys, i cnt do anything to use my phone
please help

Best to read this > Apple apparently kills Windows PC support in Safari 6.0
You're better off using IE or Chrome.

Wifi on A1427 is no longer working after 7.2 update.

I have model A1427 Apple TV. Once I updated to 7.2 the wifi no longer works. It will not search and find any networks. If I use the Ethernet cable it works fine. Any suggestions? Solutions? I have restored and restarted the device multiple times.

Apple is not here, and downgrading is not supported for a variety of reasons including security updates.
Your device is only 3 weeks old. Take it to the Apple Store and have it looked at.
Provide any feedback you wish to at:
Apple - Feedback
Cheers,
GB

Mail search using e-mail addresses not longer works after 10.6 update?

I just updated to 10.6 from 10.5. I have also added all the software updates.
The search function no longer works for e-mail addresses. I used to right-click on an address, copy and paste in search. Now, when I do that, it lists like this : NAME <[email protected]> (sample info) instead of just the e-mail address. In this new form, the search function no longer functions. Is there a way to revert to the old way mail copies e-mail address?
I do not want to have to delet ethe name & out of each paste.
input greatly appreciated!

Perfect! Works like a charm.
For others looking for the fix.
In 10.6, it seems someone at Apple decided that Copy Address should really mean Copy Name And Address And Add Angle Brackets Around The Address, because that's exactly what happens when you use Copy Address in Snow Leopard's Mail app. Instead of getting [email protected] on the clipboard, you get Sue Sample <[email protected]>.
Besides now having an incorrect name on the Copy Address contextual menu item (thought admittedly, the alternative is a bit lengthy), this behavior is incredibly irritating if you want only the email address on the clipboard. Thankfully, some engineer somewhere deep within Apple included a hidden preference to change this behavior -- and the fine folks at Mac Daddy World (the Ecamm Network blog site) dug deep and discovered this preference.
To revert to the 10.5-style behavior in Mail, first quit Mail then enter this command in Terminal:
defaults write com.apple.mail AddressesIncludeNameOnPasteboard -bool NO

Voice memo on iPhone 4 no longer works after iOS 6 update.

Since updating to iOS 6, voice memo no longer works. It kills itself upon launch. If it doesn't do it automatically, it does it once I hit any of the buttons in it (i.e. record). I've tried hard reset and regular restart. Haven't tried restoring because I noticed it on my way to work.
Anyone else have this problem?

I went to Apple and they helped me restore my phone to see if that would solve the problem and it did. Essentially restoring wipes your phone and you start from scratch. I was able to "restore from backup" and so I didn't lose anything.

HP Pavillion g6 Notebook PC - Audio no longer working after Windows 8.1 upgrade

Hi
Product Name: HP Pavillion g6 Notebook PC
Operating System: Windows 8.1 (just upgraded)
Description: There is an audio issue. Sound does not work at all. Issues include:
iTunes error message: iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly
youTube issues: a video will play for 1 second, and then display error message
THe F9/F10/F11 buttons make no changes to the Audio settings
When I click the Sound button (which is currently muted), the Playing Audio window opens stating that Troubleshooting couldn't identify the problem.
This has only occurred since I upgraded from Windows 8 to Windows 8.1 this week.
The Audio and Sound settings in HP Support Assistant are:
IDT High Definition Audio CODEC
Status: (52)
Driver: stwrt64.sys
Version: 6.10.6425.0
AMD High Definition Audio Device
Status: (52)
Driver: AtihdW86.sys
Version: 8.0.0.8808
Thanks for your help
Phil
This question was solved.
View Solution.

Hello Pipster100,
I would like to assist you with getting this audio issue resolved with your HP Pavilion g6 Notebook PC. So I can better assist you, please provide me with the model/product number from your notebook.
Also, something that you can try is to use the Recovery Manager to Restore Software and Drivers. Once you open the HP Recovery Manager, install the audio driver that will be listed under drivers.
Looking forward to your response.
Thank you,
I worked on behalf of HP.

Synchronize By Audio No Longer Works After 7.2 Update

Similar Messages

Maybe you are looking for