Synchronize file time stamp problems

I upload files from Dreamweaver (CS3) to the server. The time
stamp on the local files will say 3:37 p.m., but the time stamp on
the remote server will say 7:44 p.m.
Also, when I select synchronize, it will tell me that some of
the files on the server are newer than locally, even though I know
they aren't. But it does not give me this message consistently, and
it seems untroubled by the three hour difference referenced above.
Any ideas? A few other people at another location make
changes to this site, so it is critical to know when something
really has changed.
I am new to Dreamweaver, coming over from GoLive, so maybe I
am missing something obvious in settings somewhere? Didn't have
this trouble in GoLive.

Thanks for replying. I did think of server location. However,
I am on the East Coast, so the time difference would put the server
in the middle of the Atlantic. Also, I have been told the server is
in Denver, although I am not sure if that is true.
Also, I later logged on to the server through their control
panel, completely outside of Dreamweaver, and the date and time
stamps of the files I looked at bore absolutely no relation to
reality. Perhaps the server is a mess somehow?
Anyone else have these problems and can point me to any
reading or help files? Thanks.

Similar Messages

File Time Stamp

hi,
I have to compare the two file time stamp , one file is on my local machine and the other file is on my web server.
I am using :-
long t= urlC.getLastModified(); // to get the last modified time for a file on my web server.
and for my local file:-
long ut= f.lastModified(); // to get the time for my local file.
I need to compare this two time to know that if i have new file or not. If i have a old file I copy and paste the new file on my machine. The problem is after copy and paste both time should be same since the modified time is same for both file, but i think when i use the f.lastModified() on my local file its giving me the last accessed time rather then modified time and this way even though the file are same after i paste the latest one the time stamp results are different.
Any ideas on this ...........
The goal is to compare a time stamp of one local file with a file on my web server. if my local file is old then user needs to get this new file and replace the old file on his system.
Problem: After replacement, eventhough file is same its timestamp result are different. The modified time is same in the file property, but for some reason a call to f.lastModified()is getting the accessed time which is different since its takes the time when we paste the new file.

On 09/11/2011 22:26, isutton wrote:
> NW 6.5 with latest SP. Mac OS X (Leopard and Snow Leopard). AFP is the
> standard connection and yes this has only happened since DST change. I
> did reboot one of the servers and the issue was fixed. I would like to
> know what causes this though so that I can avoid rebooting servers.
We've seen this to and it seems AFPTCP.NLM doesn't notice the DST
change. The only fix I'm aware of it to unload and then reload
AFPTCP.NLM (or restart the server, which whilst brutal can sometimes be
cleaner).
HTH.
Simon
Novell Knowledge Partner (NKP)
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

File time stamp issue

First, I'm not sure where this post would go.
We have several Mac users and they are noticing a problem with file time stamps on our NetWare servers. They are an hour ahead. When looked at from the server's console or from a Windows box, the file time stamp is correct. This is causing some problems with our production software.

On 09/11/2011 22:26, isutton wrote:
> NW 6.5 with latest SP. Mac OS X (Leopard and Snow Leopard). AFP is the
> standard connection and yes this has only happened since DST change. I
> did reboot one of the servers and the issue was fixed. I would like to
> know what causes this though so that I can avoid rebooting servers.
We've seen this to and it seems AFPTCP.NLM doesn't notice the DST
change. The only fix I'm aware of it to unload and then reload
AFPTCP.NLM (or restart the server, which whilst brutal can sometimes be
cleaner).
HTH.
Simon
Novell Knowledge Partner (NKP)
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

Time-stamp problem with tar

everytime i untar something i get:
[yak8998 files]$ tar xfj Azureus_2.0.8.4_linux.GTK.tar.bz2
tar: azureus/azureus: time stamp 2004-03-14 08:39:50 is 48653898 s in the future
tar: azureus/Azureus2.jar: time stamp 2004-03-16 13:00:23 is 48842329 s in the future
tar: azureus/id.azureus.dir.file: time stamp 2003-12-19 19:43:31 is 41263317 s in the future
tar: azureus/cpl-v10.html: time stamp 2004-02-12 18:42:42 is 46011668 s in the future
tar: azureus/lgpl-v21.txt: time stamp 2004-02-12 18:42:42 is 46011668 s in the future
tar: azureus/libswt-atk-gtk-3038.so: time stamp 2004-02-12 17:42:41 is 46008067 s in the future
tar: azureus/libswt-awt-gtk-3038.so: time stamp 2004-02-12 17:42:41 is 46008067 s in the future
tar: azureus/libswt-gnome-gtk-3038.so: time stamp 2004-02-12 17:42:41 is 46008067 s in the future
tar: azureus/libswt-gtk-3038.so: time stamp 2004-02-12 17:42:41 is 46008067 s in the future
tar: azureus/libswt-mozilla-gtk-3038.so: time stamp 2004-02-12 17:42:41 is 46008067 s in the future
tar: azureus/libswt-pi-gtk-3038.so: time stamp 2004-02-12 17:42:41 is 46008067 s in the future
tar: azureus/libsystray4j.so: time stamp 2004-02-28 05:35:44 is 47346850 s in the future
tar: azureus/mpl-v11.txt: time stamp 2004-02-12 18:42:42 is 46011668 s in the future
tar: azureus/swt-about.html: time stamp 2004-02-12 18:42:42 is 46011668 s in the future
tar: azureus/swt.jar: time stamp 2004-02-12 17:42:40 is 46008066 s in the future
tar: azureus/swt-mozilla.jar: time stamp 2004-02-12 17:42:40 is 46008066 s in the future
tar: azureus/swt-pi.jar: time stamp 2004-02-12 17:42:40 is 46008066 s in the future
tar: azureus/README.linux: time stamp 2004-03-08 10:33:00 is 48142286 s in the future
tar: azureus/systray4j.disabled: time stamp 2004-03-06 03:43:04 is 47944890 s in the future
tar: azureus: time stamp 2004-03-14 14:18:09 is 48674195 s in the future
[yak8998 files]$
and nothign works right...
but than if I
[yak8998 files]$ tar xfjm Azureus_2.0.8.4_linux.GTK.tar.bz2
it works fine...
I'm thinking this might have to do with the system clock, except in FreeBSD and the BIOS the date/time is correct.

I'm guessing your system clock is wrong in Arch. Type "date" and see if it's the right time... and check /etc/rc.conf to make sure you have HARDWARECLOCK and TIMEZONE set right.

Can access a files time stamp for calculations?

I'm using Diadem 10.2. We have an issue with our data, where the first cycle is corrupt iff the time stamp between the current file and previous file is less than 30 minutes. This indicates a manual intervention, and it results in skewed results.
I want to discard the first cycle when the File time stamps are less than 30 minutes apart...but I can't find a way do it.
We use runtime in the file as a time channel, begins at zero each file, so i can't use any channel values to do this?
Thanks in advance for the help. Completing this task will end my assignment with this team, and I'll be moving to a new position at the end of the week. Not sure if Diadem is in my future or not, but I highly doubt it.
Thanks in advance...

Hi Jeff,
What type of data files are these? If it's a custom file format, did you write the DataPlugin that reads the file into DIAdem? Is the aquired date/time stored inside the data file somewhere? For a TDM or TDMS file, this would typically be in the "File.DateTime" property, which shows up in the DataFinder as "File.Storage datetime" and in the Data Portal as "File.Storage date/time".
The File created and modifed dates you get from Windows tend to change unexpectedly, so it would not be ideal to use those for a mission-critical process.
I'm assuming that you're loading all the various data files into DIAdem, then concatenating them into contiguous channels that contain all the data from all the files. You will then need to use e "Calculate Differences" ANALYSIS function to create a new channel that has the delta date/time values for each row. Once this is the case, you can use the Channel Calculator to find rows where the delta date/time value is invalid and set these rows equal to NoValues.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Time Stamp problem while writing data into the excel file

Hii, All
I am taking the data from the DAQ card of the TOPSCCC with the 8 ms of scanrate for each channel and there are total 16 no of Analog channels in the Card, now i am acquiring the data from the card, time stamping it and writing it into the excel file, which is tab delimited, now the problem is, the data which are in the excel file have the same timestamp for 4 to 5 continuous records, instead we want each data with the different and continuous time stamp with same difference of time stamp between two records, mean if it is difference of 8 ms then it should be the 8 ms for all, but here it is taking the differnce of 16 ms for two samples and giving same time stamp for four to five records and that shouldn't happen, here i am attaching my vi, drivers for the cards and Excel file with the data, can you please give me any suggestion how to do it?
Please help me i require this suggestion as early as possible, i am requiring it urgently.
Thanks in Advance,
Nishant
Attachments:
2026vi.llb ‏319 KB
2026_ScanMultAD_Demo_time.vi ‏80 KB
Data.xls ‏357 KB

Hello Nishant,
that's what I meant:
Message Edited by GerdW on 05-16-2006 10:32 AM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
timestamp-array.png ‏2 KB

How to include seconds and millisecond in the CSV file time stamp generated by the SpreadSheet Object?

I'm Using Lookout 6.02, in a XP Pro Windows Machine, Service Pack 3.
I have an application that collects data at the rate of 20 samples per second. It works just fine, the CSV File contains all the samples without missing a single one.
The problem is that the time stamp in the data file only shows hours and minutes. With 20 sample per second, there are 1200 samples per minute. It is hard to figure out in which second or sample number, occurred some events collected. These files are open with Excel and analyzed with Excel. There is no easy way to implement a search or a guidance for knowing the sample number or the exact time in Excel. My problem is to add the seconds and if possible the milliseconds to the time stamp done by the spreadsheet object.
Any suggestion?
Other ways to do the same that includes the time stamp all the way down to milliseconds?

Create another column with the Now() function, then set the calumn format to hh:mm:ss.s
expression would be now(trigger) for the date and time or now(trigger)-today(trigger) for just time
The trigger will cause the expression to stay updated, perhaps using the same trigger for logging the spreadsheet.
Good luck
Mike
Message Edited by Mike@DTSI on 01-16-2009 04:12 PM
Mike Crabtree - Lead Developer
Destek of Nevada, Inc. / Digital Telemetry Systems, Inc.
(866) 964-6948 / (760) 247-9512

Time stamp problem in CITADEL

Hello Everyone,
I have one SCADA system running with CITADEL as database environment.. last day due to SMPS fail inside CPU, my whole system went shutdown.. After restart, my time stamp was changed, may be due to weak motherboard battery ... I restarted my LabVIEW based application for data acqusition and storage ..
This effected the data storage going through that computer .. My system time went to 04/05/1640.. And inside MAX > Historical Database > CITADEL the all tag was having start day as "04/05/1640" and last date as "unable to find" .. Then i corrected my system date/time and restarted application and tag engine.. but my time stamp is still same in CITADEL
This is creating problem in exporting my data in DIAdem format .. I am afraid do my all last data recorded before went off ?
1) How to check CITADEL data in some other computer without pulling data out from citadel interface? .. I mean to ask is there any way to copy data from computer and read it in other computer having MAX and CITADEL ..
2) How to recover all recorded data, as my export is giving no data inside tag ?
Thanks for any help
HS

To recover the old database, One thing we can do is rebuild the index for the old database. We do this by going into MAX and right clicking the old database and selecting detach. After it is detached, navigate to the database on your hard drive and delete the pid.cdih file. Then, go back to MAX and attach the database back into citadel. When reattached without the index file, it will rebuild the index for your database. This may take a bit, but might recover your data.
Or You could go to another PC and try to get into the database. The problem could be on your PC and not the database PC.

Time stamp problem

Hi Every one,
   I have file to upload from application server.
       file name is like 'PPRICE'TIMESTAMP'.CSV'
from this file name i have to read the TIMESTAMP
I can read it like
tstamp = file+10(leng of timestamp).
now this tsamp is in character format.
i have to validate the current date with the time stamp i read into tstamp.
so here is my problem
   how do i compare a character with the type timestamp.
please some one help me.

try this
data : timst(8) type c value '10:10:10',
       timestamp type t.
replace all occurrences of ':' in timst with space.
condense timst.
timestamp = timst.
if sy-uzeit gt timestamp.
endif.
regards
shiba dutta

LVM file time stamps - time stamps are not uniform

My LVM files do not have evenly separated time stamps. Is this by design? I want to record data from multiple channels at say 100S/s and see this in my LVM file. Ideally each of the 100 data points would be separated by 0.01s. This is not what I get.
I have tried changing the samples per second and the samples per channel inputs on my timing and read VIs but I don't get even spacing. I have figured out that the DAQmx Read VI always cuts the number of samples in the file in half. So sampling at 100S/s gives me 50 data points per second in my LVM file. Given that it cuts the points in half, I would like the spacing to be .00, .02, .04 etc., but I get this: .00, .01, .02, .03, .08, .09, .10, .11, .16, .17, .18, .19...
Is this normal or am I missing something?
HP

Unfortunately, I am not a DAQ user (the last time I really used DAQ was 7 years ago, before DAQmx was created). So, I have never seen your DAQ read issue.
LVM, on the other hand, I am intimately familiar with. Using the write to spreadsheet will almost always be faster than the LVM write. Under the hood, LVM write uses write to spreadsheet, but also handles a lot of other bookkeeping (you can look yourself by converting an LVM Express VI to a normal VI and diving into it). Your biggest issue will be saving the timestamps correctly. If you are using the waveform datatype from the DAQ read, the timestamp is included, so getting it right is not an issue. Formatting it in a text format for save is.
Precisely what are you trying to do? From you earlier post, it appeared you were taking one set of several channels of data every 10ms and writing to disk. Depending on how you use the LVM write, you may be attempting to open the file and close it at every write. This would be very slow and could account for your jitter. Saving at every data point is also very inefficient. You can stream at disk rate limited speeds (~10 - 60 MBytes/sec, depending on your hardware) if you optimize your buffer and disk write sizes. Optimum disk write size is about 65,000 bytes for Windows XP. Your data is probably far less than that.
Please post more details and code and I will try to help you more.
This account is no longer active. Contact ShadesOfGray for current posts and information.

Data file time stamp on Logical Standby

Dear All,
My Logical Standby Database that is Oracle 10gR2 on Wondows 2003 Server is fully synced with the production database.
If i query number of records on Logical Standby they are the same as on production.
And when i query applied_time from dba_logstby_progress view, there is hardly a difference of second since I have configured real time apply.
BUT the date and time stamp of my data files and index files on Logical Standby is more than 12 days old.
I am confused, why this its like this. Is there any workout to fix that? Is it normal? or what?
Kindly help.
Regards, Imran

misterimran wrote:
Dear All,
My Logical Standby Database that is Oracle 10gR2 on Wondows 2003 Server is fully synced with the production database.
If i query number of records on Logical Standby they are the same as on production.
And when i query applied_time from dba_logstby_progress view, there is hardly a difference of second since I have configured real time apply.
BUT the date and time stamp of my data files and index files on Logical Standby is more than 12 days old.
I am confused, why this its like this. Is there any workout to fix that? Is it normal? or what?
Kindly help.
Regards, Imran
Is there any workout to fix that?
Who said it is something to "fix"?

Windows File Time stamp

Hello!
From my understanding there is a File class which has several methods e.g to get file name. The problem i am having is I am trying to implement a simple program which looks at the time file stamp and output the creation, access and modified times of a file; so far I have been able to retrieve the last modified time of a file but not the access and creation times. How is this done? below there is code to retrieve last modified time:-
===================================================
package timestamp;
import java.io.*;
import java.util.*;
public class Main {
public static void main(String[] args)throws IOException {
BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
System.out.println("Enter file or directory name : ");
File filename = new File(in.readLine());
// check to see if its a directory
if (filename.isDirectory()){
// check to see if its a file
if (filename.exists()){
long t = filename.lastModified();
// get a directory name
System.out.println("Directory name : " + filename.getName());
System.out.println("Directory modification date and time : " + new Date(t));
else{
System.out.println("Directory not found!");
System.exit(0);
else{   // check to see if the file name exists
if (filename.exists()){
long t = filename.lastModified();
System.out.println("File name : " + filename.getName());
System.out.println("File modification date and time : " + new Date(t));
else{
System.out.println("File not found!");
System.exit(0);
}

Hi! thanks for the response I have written the code to retrieve the creation, access and modified times using Run exec (). A user enters file or directory name and idealy it should output those times. When i run the program I get IOException error=2..... a lot of articles online suggest the error means that the files is not found but the file I have specify does exist unless the my coding is wrong. Any suggestions:
C:\>java Times
Enter file or directory name:
C:\Dev-C++
exception happened :
java.io.IOException: CreateProcess: "dir \tc" "dir /ta" "dir /twC:\Dev-C++" error=2
at java.lang.ProcessImpl.create(Native Method)
at java.lang.ProcessImpl.<init>(Unknown Source)
at java.lang.ProcessImpl.start(Unknown Source)
at java.lang.ProcessBuilder.start(Unknown Source)
at java.lang.Runtime.exec(Unknown Source)
at java.lang.Runtime.exec(Unknown Source)
at Times.main(Times.java:23)
source code
import java.io.*;
public class Times {
public static void main(String args[]) {
String s = null;
try {
BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
System.out.println("Enter file or directory name: ");
File filename = new File(in.readLine());
     // run windows command in conjuction with entered file/directory name
     // creation time "dir /tc"
     // access time "dir /ta"
     // modifed time "dir /tw"
     String [] times={"dir /tc", "dir /ta" , "dir /tw" + filename};
Process p= Runtime.getRuntime().exec(times);
//Process p= Runtime.getRuntime().exec("dir /tc" + "dir /ta" + "dir /tw" + filename);
BufferedReader stdInput = new BufferedReader(new
InputStreamReader(p.getInputStream()));
BufferedReader stdError = new BufferedReader(new
InputStreamReader(p.getErrorStream()));
// read the output from the command
System.out.println("The output:\n");
while ((s = stdInput.readLine()) != null) {
System.out.println(s);
// read any errors from the attempted command
System.out.println("Here is the standard error of the command (if any):\n");
while ((s = stdError.readLine()) != null) {
System.out.println(s);
System.exit(0);
catch (IOException e) {
System.out.println("exception happened : ");
e.printStackTrace();
System.exit(-1);
}

How to get back missing files - time machine problems

3 weeks ago, I bought a new iMac (let me call it A) and put everything from my old iMac onto it using Migrate Assistant via WLAN. It worked fine, but when I found out 2 days later that my 'new' iMac (A) had just been replaced by the 2013 iMac, I was really annoyed and contacted the store. They agreed to change it and so today, after the hourly time machine backup, I disconnected the external hard disk and deleted what I could off the machine that was going back to Apple. Plugged in the brand new iMac (B) today and when prompted, got it to transfer data from my time machine backup. However, although the programmes are there etc. the 'last backup' it used was the one from 20 September, the day before I first connected it to the (A) iMac. And so a lot of documents are missing. When I go onto time machine, it just has a lot of blanks inbetween 20 September and today, although it had been backing up on that 'new' iMac (A) every hour it had been on, but it seems that none of these have been saved. Now it has done a couple of backups today, so there are some new backups under today, but before that, just blanks until 20 September. Firstly, can I get the missing files back? And secondly, what has gone wrong and what should I do to time machine to make sure it doesn't do this again? Thanks!!!

Hi Guys,
I would really like to know, if anyone has an answer to this because I would like to be able to re-download some of my podcasts that I deleted to clear up some disk space.
Thanks very much,
John

Alternate data stream (ADS) removal does not update file time stamp.

Hello,
I am using standard CL program stream.exe to operate ads on file.
If I add ADS to file, file data\time will be changed.
F:\>dir
07/23/2014 06:43 PM            32,768 test.txt
F:\>stream cr test.txt:0 important_info
SUCCESSFUL: tf1.txt:0 is created.
RC = 0
F:\>dir
07/30/2014 07:11 PM            32,768 tf1.txt
If I remove ADS from file, file data\time will be unchanged.
F:\>dir
07/30/2014 07:11 PM            32,768 tf1.txt
F:\>stream de tf1.txt:0
SUCCESSFUL: tf1.txt:0 is deleted.
RC = 0
F:\>dir
07/30/2014 07:11 PM            32,768 tf1.txt
Is it a normal behavior? I suspect a defect in stream.exe.

Hi,
This depends on that if the stream.exe contains the related code like SetFileTime when play the deleting action.
SetFileTime function
http://msdn.microsoft.com/en-us/library/windows/desktop/ms724933(v=vs.85).aspx
So we may need your resource code about de of stream.exe to determine the issue.
Kate Li
TechNet Community Support

Dreamweaver template file (.dwt) updates related files but not file time stamp

I updated a bunch of dreamweaver template files, and allowed dreamweaver to update the affected files in the site.
The file were all checked out, and they were updated.
However, the timestamp of the files did not update.
Now, when I synchronise with my server, it doesn't see these files as being "new".
Any way I can get these to update the timestamp without manually finding and pushing all of them?
Using Dreamweaver CS5 V. 11.0 Build 4993

This is certainly an odd symptom, and one I have not heard of before. If you just create a new 'dummy' child page from this template and leave it local (i.e., don't check it in), when you do an update does that timestamp change?

Synchronize file time stamp problems

Similar Messages

Maybe you are looking for