Synchronize Folder ... does not work

I am using Lightroom 4.1 on a PC. I have added some jpg photos to an existing folder already indexed Lightroom using Windows Explorer. In other words there were some photos in there and then I added some using Windows Explorer.
When I right click on the folder in Ligntroom and select Synchronize Folder, a task box appears showing "Import new photos (8)” so I make sure the box is checked. So far so good. When I click Synchronize, I get a box saying “No photos or videos were found to import”.
When I do the same thing and also select “Show import dialog before importing” it shows there are no “New Photos” to add.   However, when you click the “All Photos” at the top of the box/screen it shows all the photos in that folder greyed out. When you right click on the photo you cannot select “Import This”.
Does anyone know why this is happening?   It is because the photos I want to sync in this folder are already indexed somewhere else in Lightroom?   Is there a way to select or unselect that setting?

Lr is telling you that the files are already in the catalog. This may be because older files with same name already exist in catalog or that you've already imported the files into another location.

Similar Messages

Since IOS7,The synchronization itunes does not work any more

since IOS7, the synchronization itunes does not work any more....

Hi martinafromlimassol,
Welcome to the Apple Support Communities!
I understand that you iPhone has been dropped and the display no longer functions. In this situation, it may be necessary to have your iPhone 5 evaluated for repair. Please use the attached link for information on the process of having your iPhone evaluated.
iPhone Repair and Service - Apple Support
Best regards,
Joe

"Open containing folder" does not work

After having hit the button "Open containing folder" in the download manager it seems that the computer is busy, but no window opens up.
I am using Windows 64 bit (all updates) and Firefox 3.6.12.
Same issue in uTorrent, so it's maybe Microsofts's fault?

venemovil, thank you for your reply.
Well, this behaviour is not restricted to a special folder. Regardless of where I save the file, it does not work. In the General tab I have set Firefox to ask me every time where to save the file. The folders are on different partitions and/or hard drives.
This occured immediately after installing Windows 7 64 (I have only installed the very most important programs).

Security Inheritance breaking in nested folder does not work

I have a scenario where I have to break the inheritance twice within the document library folders. I appreciate if you provide me any suggestions on how to achieve this?
Document library contains “employee folder1”, “employee folder2”, “employee folder3” etc. All these folders have unique security applied (no security inheritance from document library). Access is granted only for managers, Senior Managers, HRs and not to
employee.
Each employee folder (Ex: employee folder1) has two sub-folders called “Active” and “Archive”.
Now, how can I grant access to employees only to “Archive” folder of their own? I need to achieve this programmatic ways.
So far, I am able to break the security inheritance for all employee folders. Granted access to only managers, HRs and not employees. Both subfolders “Active” and “Archive” inherits from respective employee folder(Employee Folder1).
Later, I broke the security inheritance again for the folder “Archive” and then granted access to employee.
Now, logged in as employee to check if he/she has access to “Archive” folder, but it does not display folder at all. I want to display archive folder when employee access url like this(but it displays access denied):
http://SPSServer/Documents/EmployeeFolder1
However when I type full url in the address bar for archive
folder, I can see the content of Archive folder.
Will you please assist how to handle the securities programmatically? Is this multiple level security breaking is not best practice? The above behavior is expected or is there a fix I have do?
Thanks in advance.

If you say meets all cirteria
face is me
face is gf
rating is >3
then it should show only photos meeting all - me and GF and rating over 3 - it does not - without the rating it shows only photos of me and GF - with rating it shows all photos of me with a rating of over 3 and all photos of GF with a rating over over 3
I consider that a bug
Using Keywords is a good workaround - and it is very easy t keyword a face by pulling that face up on the cork board and selecting all photos in that face and assigning the keyword to them
LN
Message was edited by: LarryHN

Find Missing Folder - does not work. Please help!

Has anyone had this problem? This is driving me crazy. Any time I rename or move a folder and try to use the "Find Missing Folder" option it does not show any of my hard drives! It has been like this through several LR updates. I kept praying the next release of lightroom would fix this, but so far no luck.

Did you try clicking on the left menu, on the _folder_, and selecting "Update folder location"?
You can also try "promote parent folder" to move it up the chain and find the missing drives...
Cheers!

HT1338 I have a Leopard desktop 10.5.8 and I have trouble with MAIL. My draft folder does not work and my draft messages will not delete. delete

I have a Leopard desktop 10.5.8 and I have trouble with my Email Apple MAIL draft folder. First of all after I typed my draft and sent to draft, the folder would not open at a later date to send. In all I have 10 messages, mainly test which I cannot delete from my Draft folder.
My draft system is now working but I cannot get rid of the 10 messages which sit in my INBOX and DRAFT folders.
These messages appear in Application - Mail but they will not go.
How do I delete, or is it best to use My Disc 1# and delete all my software and replace with the Disc in order to have a new MAIL program?
Any advice would be welcome.

HI,
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup
Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

No Finder and renaming the "DivXNetworks" folder does not work. What now??

I just upgraded to 10.5 on my MacBook and I am having the same finder issues discussed in the following thread:
http://discussions.apple.com/thread.jspa?threadID=1197076&tstart=15
But when I try the suggested solution, I am being told that I do not have the DivXNetworks folder.
Does anyone have another solution to get finder to work?
Thanks in advance.
Eric
P.S. - I am a relative novice at this so a Mac for Dummies solution would be best

The Keyboard Viewer may help you determine what key-faces also may double as something else, as you can choose to shift their purpose through use of the fn key. In the keyboard & mouse system preference panel you can choose to view this in the top of the main finder desktop menu bar. With options. You also may choose to assign a key to a different function or symbol.
However I see my MacBook has a key which sports both + and = on the same keyface.
Good luck & happy computing!

Save As Copy to WebDAV folder does not work

Hi,
In Windows XP with latest reader (9.3.3), I cannot perform "Save As Copy" to a WebDAV folder. Contents of the folder is blank in the Save As dialog, and clicking the save button shows the following error:
"You Cannot Save in the Folder You Specified. Please Choose Another Location."
I was convinced that it was because Reader used the old dialog that doesn't support WebDAV as described here:
http://support.microsoft.com/kb/265867/en-gb
However, I then discovered that when doing the same from Windows 7 and Windows Vista, I do not experience this problem. I have since made a clean install Windows XP to a virtual PC for testing, and I get the same problem.
I found from one source that the web server should have Reader installed to register the MIME type for IIS. I installed it but to no avail.
Any help is appreciated.
Regards.

NB: I am using the built-in WebDAV client in Windows XP (Add Network Place with WebClient service started).
Also have a thread open on the IIS site:
http://forums.iis.net/p/1169289/1949641.aspx#1949641

Moving folder does not work in this particular case

Hi everybody,
I am currently sorting folders and I do it from Lightroom.
No problem until yesterday
- 4 levels of sub-folder
- I move the fourth level to another directory at the first level
- I see the progress bar "moving"
As a result, a new directory appears at the first level but it is empty according to Lightroom (it is not in windows file explorer : transfer has completed properly).
The original directory remains where it was in Lightroom and the files are in missing red state.
I have to click on the old directory and locate the files using the browser to make it work.
Not efficient at all
Any clue?
Thanks

Just one suggestion to be able to reconnect all at once:
Create a smart album containing the images with missing masters:
File -> New -> Smart Album, and add a rule: File Status is "Missing" (or File Status is "offline")
Then select the images in this album and go to the File menu:
and select: File -> Locate referenced File
If you are lucky, Aperture will reconnect all at once, if you point the first image version to its counterpart.

How can I OPEN files I just downloaded? They're on the DOWNLOADS screen of Firefox but I can't open them even after double-clicking? And they're not on the FOLDERS as well. I tried RIGHT-CLICK and the "open dowloading folder" or something does not work! P

How can I OPEN files I just downloaded? They're on the DOWNLOADS screen of Firefox but I can't open them even after double-clicking? And they're not on the FOLDERS as well. Even the right-click is not working ... the "open containing folder" does not work.
== This happened ==
Not sure how often
== ALWAYS! ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2)

Open Containing Folders is never active.

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder.

Bridge will do the job. View > Sort > ByType. Then you can choose a group of one type and put the files in a separate folder.

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help.

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.

cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

Adobe flash does not work on bootcamp windows 2002 xp. down loaded to windows. works with Mac. No program folder for such. shows up in "add delete programs" (in setting) but without a file size. I have a MacBook Pro purchased new in June 2010.

Using bootcamp (windows 2002 xp) I down loaded adobe flash player from the windows platform. told me it installed successfully. however does not work in windows, does works in mac. in xp there is no created program folder for such or created short cut. In the control panel (xp) in add/delete programs it is listed but wihout any file size or frequency used. I've deleted & reinstalled numerous times. Mac OS is 10.6.8. Windows is 32 bit. Can't find a thing that discusses this. THANKS!

I just now posted it Adobe Flash Player 17.0 - Bug 3973913
Adobe Flash Player 17.0 - Bug 3973913
Adobe Flash Player 17.0 - Bug 3973913
Adobe Flash Player 17.0 - Bug 3973913

Itunes does not open,everytime i try it says "The itunes application could not be opened. The required folder cannot be found" I have tried the shift key option but that does not work. help!!

I cannot open itunes. Everytime i try it says "The itunes application could not be opened.The folder cannot be found." I have tried the shift key option but this does not work. Please help.!!

Try the actions here for that driver.
iOS: Device not recognized in iTunes for Windows
I would first do this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imp

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks

I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise.

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I'll have to get a better instructor on deleting the preferences since when I've doen it in the past nothing is there when I open LR the catalog is gone. I assumed that was what was supposed to happen so I start importing all over again. But that is a different issue...
The problem has been happening since at least the beta of 3 came out and I saw other posts back then saying they had similar issues but I assume it was a beta thing... But since the full version came out and through each incremental change I haven't seen an improvement. If anything it has gotten a little worse with time.
I have to try to be careful to not be in a hurry and start clicking around in the catalog as it seems fragile until it has cataloged all the photos in the library. When starting you will see the numbers populate the folders very slowly and I try not to click on a folder that hasn't had the number of photos pop up yet. Also draging the slider down to see more of the cataloge can have the same affect and crash the system.
I wish I had more to go on.. I believe it may be a resources issue but as I went from 3-4 Gig I thought it would get better. I don't have big programs running but did have outlook and word running in the background along with firefox and chrome.
And yes it only happens on this HP desktop (it's 2+ yrs old) and may be showing it's age a bit. My laptop which has less resources doesn't have the issue.. I have them sharing the catalog. (not at the same time) just when I'm working in other places in the house.
Jeff

Synchronize Folder ... does not work

Similar Messages

Maybe you are looking for