Synchronize Outlook 2003 on a wireless home network and my E2
Have a home network w/3 computers (all Vista OS) and a E2. Need help learn how to keep Calendars, Contacts in sync. Help
Post relates to: Tungsten E2
Vista is compatable with Hotsyncing an E2. The only problems are with 64 bit OS versions.
http://Kb.palm.com and enter article number 13950.
As far as adapters I've always been a fan of the Dlinks.
Post relates to: None
Message Edited by legendeld on 12-23-2008 08:11 AM
Similar Messages
-
Need help planning wireless home network and selecting hardware
I run a music teaching business from home and currently I just have an iMac, an HDTV, a printer and an external HD (for Time Machine backups). My computer and peripherals are in a small study and my TV is in the front room where I now teach. I want to set up a wireless network which will let me do the following:
1) Access either my iMac's HD and/or my external drive's HD to retrieve and display documents and run applications from the front room, where my TV is located.
2) Use my HDTV as an extension of my iMac so that what happens on my iMac displays on my TV, including accessing the printer and other input devices that may be attached.
What hardware will I need for this besides an Aiport (Extreme?) base station, and how would I hook everything up wirelessly, specifically my TV? If I connect Apple TV to my TV via HDMi will I be able to do what I've stated above, and access my applications as well as music and photos? If not, what's the alternative? A Mac Mini connected via HDMi? Won't that make my iMac's HD redundant to the above scenario?
Hope someone can help me sort this out.Hi there,
It sounds like what you want to do is basically use your HDTV as a monitor for your computer. Devices like AppleTV will not run apps nor show the screen of other computers; for that you need some kind of VNC software (either free or something like Back to my Mac) AND a second computer hooked up to the HDTV. So you're looking at a Mac Mini and an Airport network to connect the two, then a wireless mouse and keyboard to control it. And even then, you may want to just open documents on the mini so you'll need to have a system of syncing between the two Macs if you need to access the same docs on the iMac later.
If you don't want a second Mac then you could use a mini display port to HDMi adapter and a really long HDMI run up to your HDTV, and then hope that a Bluetooth keyboard would still be in range to control the iMac (30 ft or less I believe). That's cheaper, but you have the long cable to contend with.
HTH, JVK -
I must be missing something. My MacBook Pro logs onto my wireless home network, and I can access the internet, but I can't see my Desktop PC on the network, and therefore cannot use the shared printers on my desktop PC. Is there someplace I can go to get detailed instructions on setting up the rest of the network? I'm using a Linksys BEFW1154 wireless access point/cable/DSL router.
Hi Jimmyboy,
Welcome to the forum.
Is there someplace I can go to get detailed instructions on setting up the rest of the network?
Ask and ye shall receive
http://www.ifelix.co.uk/tech/3015.html
You'll also find a lot of other good articles there that will assist you if you have a mixed platform network, all written by iFelix who is an all round top dude.
RD -
Mac Book will no longer join wireless home network
I am having ongoing problems with getting my 2.0G black Mac Book to connect to my wireless home internet and network.
For the first six weeks I had my Mac Book it connected to the network without difficulty. I have a Belkin modem/router, a PC which connects wirelessly and also an airport express on my stereo for airtunes, which was also wirelessly connected. The network was WPA Personal encrypted.
The Mac Book will connect to other wireless networks without any difficulty.
About 3 days ago my Mac Book stopped connecting to my home network - the network name is visible in the airport list but when I tried to connect by entering the WPA password it rejected the password or it returned an "error joining the airport network". The PC and airtunes were still connecting without a problem. It was just the Mac Book that would not connect.
I adjusted the network settings to remove WPA security and the Mac Book then connected easily. However I was not happy about leaving my network unencrypted or unsecured, so I attempted to secure the network again using WPA. Once again,the PC or airtunes joining the network with WPA but the Mac Book would not accept the WPA Password.
I have read as many forum posts as I could find to get all the possible troubleshooting tips on this problem. Here's what I've tried:
1. Deleting the network from my preferred network list and deleting the password from my keychain, then adding it afresh after rebooting the router and the Mac Book
3. Renaming the ESSID to a shorter name
4. Downloading Airport Extreme Update 2007-002
5. Toggling airport on and off
6. Using the $ in front of the WPA Passkey (even though that is a fix for the WEP passwords only)
7. Removing the battery (yes, someone said it worked for them!)
I had no success in getting the Mac Book to connect to the WPA encrypted network (even though it was doing so easily last week!). I then resigned myself to removing the WPA security so that I could at least get an unsecured internet connection on the Mac Book (I was thinking I could deal with the security by hiding the ESSID and using MAC filtering - not ideal, but perhaps the next best solution).
Tonight I removed the WPA security and now the Mac Book will not even connect to the unsecured network. My network ESSID is visible in the airport menu but when I select it - I get the "error connecting to the Airport network' message. I have tried all the usual fixes again (deleting network and passwords and keychains, rebooting router and MacBook etc) but it will not connect to my network. It will, however, connect to my neighbour's unsecured network just fine.
As far as I can deduce, the problem is with how the Mac Book sees my wireless network. The PC is connecting to the network. The Mac Book is connecting to other networks. Have I muddied the waters in my Mac Book through the various fixes I have tried? If so, how can I fix it so that it connects to my unsecured network as easily as it connects to next door's?
Forget about trying to secure the network with WPA for now, I just want to get an unsecured connection at the very least.
Any help would be appreciated.Thanks for your suggestions.
I've looked into the problem a bit further and I think I can trace it to the OS X 10.4.9 updates and the 2007-002 Airport Update downloads. My difficulties accessing the WPA network began after I downloaded the most recent OS X updates. After I downloaded 2007-002 update (designed to make it EASIER to access third party wireless routers! Joke!) I wasn't even able to connect to the unsecured network.
It appears I am not alone with this problem - many others have complained of losing connectivity after downloading these updates. There is a relatively difficult and risky way to uninstall the updates but I have reservations about messing with the OS, and I fear the same problem will arise with future updates.
Because I am now so sick of mucking around trying to fix this and there doesn't seem to be a fix on the horizon, I have solved the problem by buying an airport express and ditching the belkin router. I have now re-established the network without any problems using the airport express. So much for Macs being simple and compatible - the reality is a long way behind the impressive tv advertising. -
Is it possible to have an HP and Canon wireless printer on the same wireless home network?
I presently have a Canon MP560 printer on my wireless home network. I do not have this printer installed on my computer. I purchased an HP 3520e-All-In-One hoping I could have both on my home network. My os is Windows 7 64bit. I tried to install the HP 3520e, and received the following error message - "Your printer failed to join the wireless network", and said the issue was that MAC address filtering may be enabled on my computer, which it is not. It is disabled. Question: Is there a workaround to have two wireless printers on the same network, and if so, what is it? Thank you so much for your help.
Hi,
I actually have 3 printers from 3 vendors on my home network. I have tested using MAC filter and w/o MAC filter, no problem at all. The MAC filter should be on the router, not from your computer. Have you checked that ? My suggestion: use a computer on the network to connect the printer using USB cable then setup from there. The printer will use EXISTING setup from your computer and you won't need to enter security key.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Hp Officejet Pro 8600 Premium - wireless home network printing from multiple devices
We have a wireless home network with several desk tops, lap tops and tablets using the network for internet access. There is only one printer in the home, our hp Officejet pro 8600 Premium. Right now everyone who has access to the network can print. We want to prevent printing from specific devices while allowing printing from others. How do I password protect the printer so that only certain devices may print? Or alternatively, remotely prevent devices from printing?
Well this is a little tricky. You have a 'home' network so we assume you want everyone to print went they want. If you are talking about 'guest' that come over and use the printer, the best thing is to get a router with a Guest Network which isolates your home network.
That being said there is no 'password' you can put on the printer , however you can add security.
Start/Devices and Printers/ Right click on your printer and select Printer Properties , select the Security Tab. Now you can set security.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
Advice on improving wireless home network
Hello,
I've got a wireless home network set up, but it isn't performing as well as I would like. I have 2 computers I want using the network, 1 powerbook G4 and 1 sony vaio. I purchased a time machine with built in airport extreme (5Gz N) as my base station. I've also purchased 2 airport extremes to extend my network and add a printer to the network. Now, I want to try to improve my performance.
I have a 3 story house. The time capsule is hooked up to the cable modem in the garage, on the east end of the house. I put 1 AE in the 3rd story office on the east end of the house and hooked up my printer. I put the other AE in my 3rd story bedroom on the west end of the house. Although both AE's do extend the signal a bit, it's not by much.
Before wifi became popular, the previous owner of the house (my father in law) installed an ethernet network throughout the house. The hub is in the garage, which is why the cable modem is hooked up down there.
Now, what would be the best and quickest way to improve my wifi coverage and bandwidth throughout the house, especially in that bedroom on the west end. Should I moved the time capsule out of the basement? Does being down there weaken the coverage? Can I connect my time capsule to my cable modem through the ethernet network?
Or am I just expecting too much from these devices?
Also, I assume I'm only using the 2.4 Ghz spectrum, since my computer's airport card is a little too old to take advantage of the 5 Ghz spectrum, or am I miss understanding something?
Any advice would be appreciated.
Thanks!Now, what would be the best and quickest way to improve my wifi coverage and bandwidth throughout the house, especially in that bedroom on the west end. Should I moved the time capsule out of the basement? Does being down there weaken the coverage? Can I connect my time capsule to my cable modem through the ethernet network?
Yes, for the best overall bandwidth performance, you will want to take advantage of the Ethernet backbone. What you will want to do, in this case, it to create a "roaming" network with each of the base stations connected to this backbone.
Where you place the base stations will depend on where there will be Ethernet jacks available.
If possible, I would suggest the following:
o Leave the Time Capsule (TC) connected to the modem and run an Ethernet patch cable from one of its available LAN ports to the Ethernet jack.
o If you will be doing most of your computing on the third floor, place the AirPort Extreme Base Stations (AEBSn)at both ends and (of course) where there are Ethernet jacks available. Connect an Ethernet patch cord between the jack and the WAN port of the AEBSn.
Both AEBSns will need to be reconfigured as bridges as you will want the TC to be the main router providing both NAT & DHCP services for the entire network. Use the same Network Name for each base station, but be sure to use a different radio channel to prevent interference.
Also, I assume I'm only using the 2.4 Ghz spectrum, since my computer's airport card is a little too old to take advantage of the 5 Ghz spectrum, or am I miss understanding something?
If you can provide me with the exact Machine ID for your Mac, I can let you know if its supports 802.11a ... which operates on the 5 GHz band. You can find this through the System Profiler. It would be something like PowerBook2,1.
You will have a number of options here, depending on the exact models of your base stations. Are any or all of them the simultaneous dual-band versions? -
Recently I was working on my home Network and lost myPassword for my Home wireless connection. After many attempts, I remembered thepassword and was able to get in. Now the MacBook Pro only works at home on aHard wire connection. I have an additional 9 devices on the same network, allare functioning properly. The Air connection works fine at any other Networksout side the Home connection. I did a PRAM reset, deleted the Network profileand rebuilt in System Preferences. Still unable to connect wireless on Homenetwork. Any Ideas?
I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?
-
I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.
See if the iPad will accept the password after you restart it. It's worth a try.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
You could also try a reset as well.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
How do I get my Canon MX700 to scan to my new iMAC top? Currently the Canon will print from the iMAC. They are on a wireless home network. The Canon use to scan to the PC using software called MP Navigator.
Did you try scanning using Image Capture?
Otherwise, check the Canon website for updated software. -
Printing to DJ 930C from HP Pavilion DV4-1287CL on a wireless home network.
I am having a problem with my DeskJet 930C. It is a fine printer and has worked for many years. It is connected directly to a desktop PC running Win7 (32-bit). I recently acquired an HP Pavilion DV4-1287CL (64-bit) and have attached it to my home network. I thought I'd be able to print remotely from the new portable, but I have not been successful so far.
I downloaded the HP programs designed to troubleshoot printer installation problems, and this did help me to find a driver for the Pavilion. This driver works fine if I connect directly, via USB cable, to the printer. However, if I try to print via the network, it does not work.
I'm wondering if the problem has to do with the fact that my desktop is using 32-bit Win7, while the portable is set up with 64-bit Win7. Is there an incompatibility issue?
For the time being, I will be able to print by connecting the portable directly to the printer, but I would much prefer to be able to work remotely on the portable and send the data via the network to the printer. Is this doable?
Thank you to anyone that can offer help!
Tom.
This question was solved.
View Solution.Hi @Accordion_Tom,
Welcome to the HP Forums!
I see that you are trying to print to your HP Deskjet 930C from HP Pavilion DV4-1287CL on a wireless home network. I am happy to look into this for you!
According to this printer's specifications. This printer is only supported by the following connections:
Cable Part description Part #
HP IEEE 1284-compliant parallel interface cable
With one 1284-A connector for
the computer port and one
1284-B connector for the printer port.
2 m (6.56 feet) long
3 m (9.84 feet) long
C2950A
C2951A
HP USB-compliant interface cables
2 m (6.56 feet) long
C6518A*
Otherwise, I would suggest to please call our phone support at 800-474-6836 for your upgrade options. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this clears things up for you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
I cannot print any email or web pages over a wireless home network. I know that I can print my files over this network, just not anything from the web or emails using Firefox. I am using Windows 7 and printing to an Epson.
== This happened ==
Every time Firefox opened
== when I set up the wireless home network.The most likely reason for this is that the wrong printer is chosen in the File->Print window.
In Firefox, go to File->Print and click the dropdown box with printer names. Ensure that the correct network printer is selected, then try printing again. -
I have a wireless home network consisting of a time capsule, two airport expresses and a cable modem. Even with this configuration I get a very weak signal in much of be condo - the walls, etc. are solid concrete. I want to see if I can add another separately connected cable modem and connect one of the existing airport express to it by Ethernet cable. If so, this would give me two wired hubs and greatly improve signal strength. I do not know if this configuration will in fact work or if I will just wind up with two, separate and unrelateable networks. Unfortunately, there is no way to run any additional Ethernet cable and I doubt simply adding more Airport Express will help. Thanks.
Try Ethernet over Power adapters.. these are very popular for your kind of environment.. being able to make non-wireless link to another area where you can setup a wireless access point.
Airport Express are not great for wireless power.. if you really have issues with wireless strength in a bad environment apple stuff is not the way to go.
The comparison chart here.
http://www.smallnetbuilder.com/lanwan/router-charts/bar/58-2_4-ghz-dn?see=P_F
This is their worst test location you can also see averages.. the latest airport extreme.. is there a long way down.. and that is a much better wireless device than Airport Express.
The Ubiquiti power AP is small cheap and designed for precisely this duty.. useless in an apple wireless network.. you will need to run ethernet or EOP adapters back to the main router.. but if the normal omni directional antennas don't provide enough signal you can get directional ones.. I suspect you can cover your whole apartment with a pair of these and high gain directional antenna. -
How to setup password to protect my wireless home network
Hi everyone.
Please bear with me...Im a newbie in Wireless Home networking.
I just bought today a WRT54G wireless router and I was able now to connect a (wired) desktop and WiFi laptop to it.
My questions now are:
1) how do I configure it such that it asks for a password before a device can connect to it?
2) how do I know if someone else, or a neighbor is connecting/ connected to it?
3) Is there a way for me to see list of all devices/PCs that are connected to it...just to know if an "outsider" is connected to it?
Im asking this because when i tried to connect that WiFi laptop, it connects easily without asking for a password. When I clicked on the Wireless network Connections....I found my router that says "Unsecured Wireless Connection"
However I wanted to have it "secured" or password-enalbled so that no one else can have free access to my Internet connection.
Please advise a newbie....will be greatly appreciatedI'm unsure of the firmware for version 7 but most of my adivce should still hold.
after doing some searching on WPA and WEP and WPA2, WPA is better, with WPA2 being better than that
so once you configure it for WPA (or WPA2 if a 54g v7 supports it) it should be as simple as entering a password and remembering it
as for seeing whose connected, that's the only way I know of doing it (on a 54g v5 since that's what I have) is to go into the mac filters and then check and see the wireless mac's that are connected. That's one of the only things I don't like about the 54g, is that there is no easier way to see who's connected.
if you want even more security, you could get the Mac address of your laptop, add it to the mac filter, and configure it so only that mac address can access the wireless router, though going this route means everytime you want to add a new wireless device to the network, you have to add it to the mac filter list. -
Connecting to Wireless Home Network w/o an AirPort Card
I want to connect a CRT iMac that's incompatible with AirPort Extreme to a wireless home network.
The problem is that every USB adapter I've seen is Windows-only.
Does anyone know of any USB-wireless adapters that are compatible with OS X?Strider, it
i is
standard-Airport-ready, but as Henry observed, it's not worth spending twice as much as an ethernet bridge would cost. (At least not for a desktop.)
(I was hoping to save some money by using USB but judging by the other Topic, that would be more trouble than it would be worth.)
I have found one good deal on an ethernet bridge here http://store.yahoo.com/justdeals/me101au.html . Apparently the reason that it's inexpensive is that it was manufactured to be sold in Europe. Is there any reason that that bridge, with a U.S. power adapter, wouldn't work well on this side of the Atlantic?
Maybe you are looking for
-
When I open web pages using Firefox, all of the outbound links on the page are have a colored shading around them. Not only is it annoying, sometime it's the same color as the link text which makes the link unreadable. I know this must be a simple ad
-
HT201302 how do i upload specific pictures from iphone to windows 7?
i only want 300 of my 1,000 pictures, but when i plug my iphone in, it automatically downloads all of them. is there somewhere i can select the specific pictures i want from my iphone onto my computer? iphone 4s -> Windows 7
-
Chinese trackpad input not working - won't insert characters
Hi all, I've been trying to set up chinese character input for an hour already, and no luck yet. I've read tons of articles here but the solutions mentioned made no difference. I open TextEdit (or Chrome, Notes, Safari... any app, really) and hit ctr
-
This is a version of a site map protocol in BC: urlset xmlns="http://www.google.com/schemas/sitemap/0.84 this is a version of site map from google Google adheres to Sitemap Protocol 0.9 as defined by sitemaps.org. Sitemaps created for Google using Si
-
In SAP as per indian scenario is there any system available for Monthly sale tax returns / vat returns service tax returns? Please guide.