Synchronize RMAN and TSM

Hi.
Question is little off topic, but maybe someone can help me.
I'm using Oracle 8i on IBM AIX. My database is backed up on TSM server (TDP for Oracle) with RMAN without recovery catalog database(RMAN works on controlfiles of database). During deleting old backups RMAN doesn't wait for confirmation from TSM server, and now some of my backups are out of synchronization with TSM server. I have 8 backup pieces that are on TSM server, but are not in RMAN database.
QUESTION: does anyone of you know the tool or knows how to synchronize RMAN and TSM. There is a tool named "tdposync" which comes with "Tivoli Data Protection for Oracle", but it works only when RMAN uses recovery catalog. I know, that it is possible to write a program that uses TSM API to delete unneeded backups from TSM server, but I'm not very familiar with programming.

Here are the details:
RMAN> run {
2> allocate channel t1 type 'sbt_tape';
3> restore archivelog from logseq 396 until logseq 396 thread 1;
4> release channel t1;
5> }
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: t1
RMAN-08500: channel t1: sid=11 devtype=SBT_TAPE
RMAN-08526: channel t1: MMS Version 2.1.10.0
RMAN-03022: compiling command: restore
RMAN-03022: compiling command: IRESTORE
RMAN-03023: executing command: IRESTORE
RMAN-08017: channel t1: starting archivelog restore to default
destination
RMAN-08022: channel t1: restoring archivelog
RMAN-08510: archivelog thread=1 sequence=396
RMAN-03026: error recovery releasing channel resources
RMAN-08031: released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: restore
RMAN-03007: retryable error occurred during execution of command:
IRESTORE
RMAN-07004: unhandled exception during command execution on channel t1
RMAN-10035: exception raised in RPC: ORA-19507: failed to retrieve
sequential fi
le, handle="msjpd1_backup_arch_cecuopqf_1_1", parms=""
ORA-27007: failed to open file
IBM AIX RISC System/6000 Error: 168: System call error number 168.
Additional information: 7011
Additional information: 2
ORA-19511: SBT error = 7011, errno = 168, sbtopen: system error
RMAN-10031: ORA-19624 occurred during call to
DBMS_BACKUP_RESTORE.RESTOREBACKUPP
IECE
null

Similar Messages

RMAN and TSM

I'd like to backup archive logs via RMAN and TSM on one node and restore from RMAN/TSM to another node. I always get permission error messages from RMAN. Any idea what's wrong?
Environment:
Oracle 8.1.6
TSM 4.1
TDP for Oracle 2.1.0.10
Any help is greatly appreciated.
Thanks,
Marco

Here are the details:
RMAN> run {
2> allocate channel t1 type 'sbt_tape';
3> restore archivelog from logseq 396 until logseq 396 thread 1;
4> release channel t1;
5> }
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: t1
RMAN-08500: channel t1: sid=11 devtype=SBT_TAPE
RMAN-08526: channel t1: MMS Version 2.1.10.0
RMAN-03022: compiling command: restore
RMAN-03022: compiling command: IRESTORE
RMAN-03023: executing command: IRESTORE
RMAN-08017: channel t1: starting archivelog restore to default
destination
RMAN-08022: channel t1: restoring archivelog
RMAN-08510: archivelog thread=1 sequence=396
RMAN-03026: error recovery releasing channel resources
RMAN-08031: released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: restore
RMAN-03007: retryable error occurred during execution of command:
IRESTORE
RMAN-07004: unhandled exception during command execution on channel t1
RMAN-10035: exception raised in RPC: ORA-19507: failed to retrieve
sequential fi
le, handle="msjpd1_backup_arch_cecuopqf_1_1", parms=""
ORA-27007: failed to open file
IBM AIX RISC System/6000 Error: 168: System call error number 168.
Additional information: 7011
Additional information: 2
ORA-19511: SBT error = 7011, errno = 168, sbtopen: system error
RMAN-10031: ORA-19624 occurred during call to
DBMS_BACKUP_RESTORE.RESTOREBACKUPP
IECE
null

Rman and TSM doesn4t work

I have two Databases (8.1.6.3.0) on two NT4/SP6-Servers and want to backup them with RMAN. Backing up on Disk works fine but now i want to use the Oracle-TDP(TSM).
The rman-script startss, but it breaks down with following error:
RMAN-00601: fatal error in recovery manager
RMAN-03004: fatak error during execution of command
RMAN-10038: database session for channel t1 terminated unexpectedly
On the other server the session for channel t2 terminates.
The are not running at the same time!!
I would be very happy if you could help me.
Axel Hanings

What version is the TDP for Oracle and TSM server?

RMAN backup and TSM question

We have rman backup file name contains the datetime so it is unique and easy to tell. But TSM keeps every file 4 versions, so the backup file (always 1 version because of unique name) will stay on tape forever. I have no idea about TSM, according to your experience, what is the normal solution here?

Dedicated forum for {forum:id=74}.
But quickly, in general, "DBA" and "TSM/Storage manager" need to agree on media manager use and setup the system accordingly.
Edited by: orafad on May 19, 2011 3:00 PM

"error while trying to synchronize Audio and MIDI"

Hello All,
Just got Logic 8... installed (as upgrade from 7)
I keep (consistantly) getting this:
"error while trying to synchronize Audio and MIDI" when in play or record mode... has anyone any ideas regarding a 'fix' or maybe even to point out stupidity on my part re settings; I'm open to comments here and would obviously love to get this fixed/sorted out.
System is basically: G5 Dual 1.8/OS 10.4.10/MOTU 828 Mk2
Thanks in advance.

Hi,
I first did what the manual was telling me but that made no difference as the sync would drop within 5 to 15 bars... very frustrating.
Since my original posting I have spoken with MOTU regarding this Audio/MIDI sync problem. There is evidently a simple reset that needs to be done (that is if like me you are using a MOTU 828 Mk2 interface), you have to toggle through both digital input and output settings in the Audio Control Panel. The problem then goes away.
I hope that is helpful. I think that this probably is relevant to all MOTU interfaces, or is at least worth trying if you are having this problem... maybe other manufacturers too... ?
Cheers, Kick

Can I use icloud to synchronize contacts and calender for 1 ipad and 3 Windows 7/8 PC?

Can I use icloud to synchronize contacts and calender for 1 ipad and 3 Windows 7/8 PC?
regards,
Jan

Thanks! One more question ..... Will I have to enter appointments on an iCloud default calendar by logging in to my iCloud account every time, or can I just enter data on calendars in my 2 devices?

Error while trying to synchronize audio and MIDI. Sample rate 42804 recognized. Check conflict between Garageband and external device.

Sometimes, while playing back my software instrument songs, I get an intermittent pop-up error message, saying "Error while trying to synchronize audio and MIDI. Sample rate 42804 recognized. Check conflict between Garageband and external device."
(Sometimes the five digit number is different, but remains a five-digit number beginning with "4".)
Simultaneously, the song stops until I press the "Okay" button in the pop-up window.
When I continue to play the song, the sound is jerky and clipped, and the playhead doesn't keep up with the song, and then suddenly jumps to the part of the song currently being played.
There's also a sound of static.
The issue seems to occur whether or not I have my MIDI controller turned on and plugged into my desktop Imac.
Tony

Hello,
open your Audio MIDI Setup utility and set the input to 44100
https://discussions.apple.com/message/12710638#12710638

Error while trying to synchronize Audio and MIDI. plz help i cant hear anything

plz help me i cant hear nothing and its says: Error while trying to synchronize Audio and MIDI.
Sample Rate 38536 recognized.
Check conflict between Logic Pro X and external device. ???????? PLZ HELP

It means you are overtaxing the CPU, likely with just one (3rd party-)software instrument plugin. Ignore the word "external", in this context it often means "3rd party plugin".
So what synth is it? Since you're Dutch, it's probably one of the trancy dancy synths, such as Albino, Diva, Sylenth or Massive... I could be wrong though...
The best way to avoid this message is to Freeze the track with the guilty synner - however, a frozen track cannot be edited, so if that is a problem, you will have to make the synth itself run lighter, which can be achieved by turning of internal effects that are ON the synth itself, especially reverb.
http://help.apple.com/logicpro/mac/10/#lgcpf1cbfd51

How to solve: Error while trying to synchronize Audio and MIDI.

The project consists of an hour long DVD of a play which I have loaded into Logic ( on a MacbookPro) and stripped the audio
and cut it up into regions to name the different parts of the play ( verse/music etc)
Usually I am able to play the project with a small window showing the Movie and watching the audio in the back ground adding markers and notes.
Most of the time this works fine.. but then I get the following message re-occurring every few seconds:
"Error while trying to synchronize Audio and MIDI.
Sample Rate 26848 recognized.
Check conflict between Logic Pro and external device"
There is no MIDI, there is no external device, the Sample Rate is the usual 44.1
Can anyone explain how to stop getting this error message which keeps interrupting workflow?

Hello,
open your Audio MIDI Setup utility and set the input to 44100
https://discussions.apple.com/message/12710638#12710638

LogicPro 8 "Error while trying to synchronize Audio and MIDI"

Hello,
My rig: Dual 2.5 GHz PowerPC G5 3.5 GB DDR SDRAM. OS X 10.4.11. Logic Pro 8.0.2, Motu 828mkII interface, emagic Unitor 8 midi interface, Makie Control Universal, 7200rpm Firewire 800 Hard drives.
I Just launched a Logic Pro 8 session that was started a few days ago and when I click "Play" there is no audio from the recorded tracks coming through the speakers. All that comes through the speakers is a series of hi pitched (roughly 4k to 6k) beeps and then an error message: "Error while trying to synchronize Audio and MIDI". I've tried restarting everything and still get the same results. I tried switching audio device to "built-in audio" instead of the motu and that works fine, (the tracks play back correctly).
I've also tried other sessions that have different sample resolutions and bit depth and I also tried reseting all midi drivers.
All sessions produced the same results, "Error while trying to synchronize Audio and MIDI", and played correctly when using built-in audio device. It's looking like the problem is with the motu.
How can I trouble shoot this?

Sounds like the MKII needs a reset.
You can reset the 828 MkII to default settings in the following way (as provided from the MOTU support page):
Follow these steps to restore the 828mkII to Factory Default Settings.
Disconnect the firewire cable from the 828mkII
Press the Setup knob
Turn the Setup knob all the way to the right
Press the Select knob
Press the Value knob
Power off the interface and plug the firewire cable back in
Power the interface back on
pancenter-

Solution for "Error while trying to synchronize Audio and MIDI" and "System Overload" messages

Article for those who hate Logic error windows
Seen in Logic Pro 9.1.7 on Mac OS X Lion 10.7.4
and Logic Pro 9.0.0 on Mac OS X Snow Leopard 10.6.5
Logic Pro:
System Overload.
The audio engine was not able to process all required data in time.
(-10011)
Error while trying to synchronize Audio and MIDI.
Sample Rate xxxxx recognized.
Check conflict between Logic Pro and external device.
The search in the help given as follows: overload occurs when you use a lot of tracks and a lot of effects on them, and the synchronization is lost when the selected MIDI track for recording or playback. Yes, this is all that is written in the resources. And here are useful tips that have been found:
The Bounce function allows the entire instrument track to be recorded as an audio file. This bounced audio file can then be used (as an audio region) on a standard audio track, allowing you to reassign the available processing power for further software instrument tracks. For more details, see "Bouncing Your Project."
You can also make use of the Freeze function to capture the output of a software instrument track, again saving processing power. For details, see "Freezing Tracks in the Arrange Area."
These tips - about the timing. About overload - there are no tips, except as "reducing the number of plug-ins" and "increasing latency". Zero useful tips - I got two errors in the test project with a blank audio track with no effects, MIDI drums and standard synthesizer, it was no aux buses, and the entire project was only a single plugin in the master track.
Here is the configuration of my computer:
iMac12, 2
CPU: Intel Core i5 3,1 GHz
Memory: 4 GB
And here's a project that almost immediately stops Logic, all instruments and plug-ins with the init-patch, ie not the most demanding settings:
It's sad.
When this happened the first time, I could start the project only if the empty audio track has been selected, a track specially designed so that you can at least start the project. Then, this problem has evaporated along with the changing conditions of work and I forgot about it until the last case.
I was looking for the cause of the problem in the console and the system monitor for two days, and finally I found that Logic ping to the network frequently. I remembered the exact time of occurrence of the problem, and system logs revealed that the problems began immediately, as soon as I deactivate the service of the Internet.
Solution: enable the Internet, or add a new network service on a computer with no Internet. I just created the Ethernet connection to the ip address 1.0.0.0
Logic immediately began to sing.

Hi gabaghoul
Yes, it worked for me on four different OS and Logic versions (10.6 - 10.8 and 9.0 - 9.1.6)
It does not work in some cases, hard enough to tell in which one, but you can try, it very easy: go to the net settings and create new Ethernet connection to the ip address 1.0.0.0 and connect LAN cable to the port.
Also you can try to figure out what happens in your system while Logic error occured - fot that you just start Console and search "logicpro"
Pay attention to repetitive events in a console and events with suitable timing, not so far from error
The problem may be related to the GUI or system memory, sometimes turning off Safari (or Chrome, others browsers) might help.
Message was edited by: spred

GarageBand: Error while trying to synchronize Audio and MIDI.

This error recently started popping up for me while using garageband.
GarageBand: Error while trying to synchronize Audio and Midi
Sample rate xxxxxx recognized
Check conflict between garageband and external device
When I use garageband, my input and output are usually set to my scarlett 2i2 interface and I've never received the synchronizing error before today. I am not using any Midi.
I've checked the Audio Midi Setup tool to make sure that my format is at 44100.0Hz and have set the "sound" in system preferences to use my scarlett 2i2 interface for input and built-in system for output.
Can anyone help me out with why i'm receiving this error?

Good grief! I'm on a Mac OS X and was having this same problem. All these discussions about so much technical jargon just had me exhausted ... not only did I not understand what was being referred to, but I couldn't imagine how to do what was being said.
Here's what got me straight:
1. Go to System Preferences and click on Sound
2. Click on Input and select your USB mic (or whatever you're using)
3. Click on Output and select Internal Speakers
Done. No more problem with Garageband!

Re: ERROR while trying to synchronize Audio and MIDI

Hi Guys/Gals
A bit of a strange one. Yes, I have posted a similar question concerning my trusted 2.7ghz G5 PPC and my Digidesign 003R which it turned out that the Digi's FW ports were to blame.
New issue. I have just completed an install on a client's machine, here's it's specs etc:
Hardware:
iMac 2.8Ghz Duo Core Intel, 4Gb ram, 500Gb HD etc (the custom top end before last week's upgrade) arrived last week. Running Leopard 10.5.2 and has all the latest updates. (firmware/software)
Apogee Ensemble (with newest firmware update/upgrade)
Iomega ULTRAMAX HARD DRIVE 1TB USB 2.0/FIREWIRE® 400/800 (sorry, copied from their site)
M-Audio Axiom 49 USB Midi controller/keyboard
Software:
Logic Pro 8 (latest 8.0.1) All standard plugs/samples, no third parties at all, just 100% Apple install.
Reason 4 (latest 4.0.1)
I reformatted the built-in hd to two partitions of equal size, one for the OS and one for whatever. I formated the external terrabyte into two partitions also of equal size, non are journalized, all are GUI partitions. I copied the LP 8 demos to both the internal "spare" partition and to the primary "Audio1" partition of the external drive. The Iomega HD is connected via the 800FW port and the Apogee Ensemble is connected via the 400FW port (the iMac has one of each). If I play any of the demo songs from the internal partition, they play perfectly, if I play them off the external Iomega partitions (either) within 8 bars I get:
"Error while trying to synchronize Audio and MIDI
Sample Rate 45946 recognized.
Check conflict between Logic Pro and external device."
As I said, any demo played back from the internal drives absolutely perfectly..... Any ideas?
Cheers!!
Bobs

There are a lot of different opinions about partitioning in Mac OS X and you can read some of them here:
http://forums.cnet.com/5208-7592_102-0.html?forumID=25&threadID=44865&messageID= 530144
and here
http://forums.appleinsider.com/archive/index.php/t-8096.html
My opinion is that partitions cam be useful when:
1. the OS can't manage big volumes (as it was in the past)
2. the OS can't optimize the space on big volumes
3. want to install 2 or more separate OSes
4. organization (like in your case).
Now, OS X filesystem (HFS+) is robust and reliable and OS X is a multitasking system that parallelizes I/O operations like reading or writing a disk.
So if you have 2 separate hard disk the system can parallelize the operations (i.e. reading from one and writing into another one) but if you have 2 partitions the system (or better the disk subsystem) have to jump back and forth among the partitions.
About the linking schema of the Audio interfaces and the FW hard disks it can change: I connect my FW disk to the MOTU and the MOTU to the mac while a friend of mine have to put the disk before of his Presonus.
Thanks for the beer!
cheers
rob

(rare?) Error while trying to synchronize Audio and MIDI.

Hello there,
My problem: Until today, I've been working with all my projects without any problems with my configuration, but today I've turned on the computer and when I play any project (including a new project with one or two audio tracks or the SAME PROJECT that i've been working the last night), 3 or 4 seconds later I get the fantastic and typical error from logic and an apparently more slow performance loading projects...
everytime... play, and error...play (or pause) and error...
"Error while trying to synchronize Audio and MIDI.
Sample Rate 41347 recognized.
Check conflict between Logic Pro and external device."
and sometimes... (randomly)
"System Overload. The audio engine was not able to process all required data in time."
... and I haven't touched anything / no updates / no setup changes... NOTHING.
I've tried all these things (searching in the forum) with NO luck:
http://support.apple.com/kb/TS2111
http://support.apple.com/kb/TA24535
My equipment:
Macbook pro 2,4 Intel Core 2 Duo / 2 GB RAM
Logic Pro 9.1.3
Snow Leopard 10.6.7
Motu ultralite Mk2
Lacie quadra 1 TB (FW800)
- I have a motu ultralite mk2, but i've tried with the built-in audio too, and I'll just get the same performance.
- I've tried with the lacie hardrive on and off and with projects in the internal hardrive and others with all the audios in the external.
The funny thing is that i've been working in a project this last night and all PERFECT, and now its impossible work with it, and I haven't changed anything.
PLEASE, any help? I'm confused and I need to finish some works...
THANKS!

If the MOTU unit has a reset procedure, unplug it from the Mac and do it now. That's simialr to what the older 828MkII units used do when they needed to be run through the reset procedure.
It can be caused by a Firewire/USB glitch or power surge when powering up the computer.
p.s.
As a side note, I remember that same error.....
"Error while trying to synchronize Audio and MIDI. Sample Rate 41347 recognized."
From Logic 3.5, it's been around for that long, with different sample rates of course.
Back then it was from bad audio drivers.. it's difficult to pin down some of these errors as they can be caused by different things.
pancenter-

Error while trying to synchronize Audio and MIDI-HELP PLZ!!!

Hi there, i have just started gettin the message wheneva i try and play audio/audio instr:
'Error while thrying to synchronize Audio and MIDI-Sample Rate 41222 recognized. Check conflict between Logic Pro and external device'
I get lots of high frequency bleeps n squeals thru the speakers. I am runing Motu 828mk2 and have only started gettin the problem reently its been fine before. The Motu has not problem playing audio in iTunes etc but as soon i open Logic it goes funny.

Hi there, i have just started gettin the message
wheneva i try and play audio/audio instr:
'Error while thrying to synchronize Audio and
MIDI-Sample Rate 41222 recognized. Check conflict
between Logic Pro and external device'
I get lots of high frequency bleeps n squeals thru
the speakers. I am runing Motu 828mk2 and have only
started gettin the problem reently its been fine
before. The Motu has not problem playing audio in
iTunes etc but as soon i open Logic it goes
funny.
Sounds like you need the infamous MOTU "Reset".
(the bleeps & squeals is a give away)
Follow these steps to restore the 828mkII to Factory Default Settings.
-Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable back
in
-Power the interface back on
Pancenter-

Synchronize RMAN and TSM

Similar Messages

Maybe you are looking for